Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-0631 | 8.5 high | 2.0% | tp-link, archer_be230_firmware | An OS Command Injection vulnerability exists in the Surfshark VPN login functionality in TP-Link Archer BE230 v1.2, BE3600v1, AX10 v3 and AXE75 v1, allowing an adjacent authenticated attacker to execute arbitrary code. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420 and Archer AXE75 v1 < 1.5.6 Build 20260623. | 12 h ago |
| CVE-2026-110879 | 9.8 critical | 1.0% | no CPE yet | jackson-databind validates the outer class of a class-name type ID but accepts attacker-selected classes inside its generic arguments, even when those classes violate the declared type or would be rejected as direct type IDs. This bypasses the generic-argument validation added for CVE-2026-54512 (GHSA-j3rv-43j4-c7qm), of which this is an incomplete fix. DatabindContext._resolveAndValidateGeneric() checks the outer class against the declared base type and then passes each argument from the type ID to _validateTypeParameter(), which validates the argument against the outer base type rather than enforcing its corresponding declared generic binding. It also invokes validators with arguments that have not passed the subtype check those validators expect. Under the default DefaultBaseTypeLimitingValidator this accepts an unrelated class inside a generic subtype even when the same class is rejected as a direct type ID. Where an allowIfBaseType(...) rule approves the outer type, Jackson substitutes LaissezFaireSubTypeValidator, so the configured validator no longer restricts the embedded arguments. The element type of a plain array type ID such as [Lpkg.Gadget; is likewise left unvalidated once the array's base type is approved. Affected paths include annotation-based class-name polymorphism with a default Jackson 3.x JsonMapper, configured default typing in both Jackson 2.x and 3.x, and integrations that expose that default typing. The default-validator case requires no application-authored validator: with @JsonTypeInfo(use = Id.CLASS), a direct gadget type ID is rejected as "Not a subtype", while a type ID naming a generic wrapper around the same gadget is accepted and deserialized, including attacker-supplied bean properties. Where class-name default typing permits Map, a property declared as Map<String,String> accepts HashMap<FileSystemXmlApplicationContext,String>; map-key discovery then passes the attacker-controlled JSON property name to the selected class's one-string constructor. With Spring on the classpath and attacker-controlled XML the application can load, that constructor loads the XML and invokes ProcessBuilder.start() under the application account, giving arbitrary command execution. This issue affects com.fasterxml.jackson.core:jackson-databind from 2.10.0 and tools.jackson.core:jackson-databind from 3.0.0. Releases before 2.10.0 are not affected, because PolymorphicTypeValidator was introduced in jackson-databind 2.10.0. | Wed 28 Oct |
| CVE-2023-54203 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr When smb1 mount fails, KASAN detect slab-out-of-bounds in init_smb2_rsp_hdr like the following one. For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called. The issue occurs while handling smb1 negotiate as smb2 server operations. Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr, allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that smb2 server operation does not handle it. [ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes [ 411.479312] ksmbd: init_smb2_rsp_hdr : 492 [ 411.479323] ================================================================== [ 411.479327] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199 [ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G OE 6.1.21 #3 [ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3801 08/23/2019 [ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 411.479425] Call Trace: [ 411.479428] <TASK> [ 411.479432] dump_stack_lvl+0x49/0x63 [ 411.479444] print_report+0x171/0x4a8 [ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200 [ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479497] kasan_report+0xb4/0x130 [ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479537] kasan_check_range+0x149/0x1e0 [ 411.479543] memcpy+0x24/0x70 [ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd] [ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50 [ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd] [ 411.479656] process_one_work+0x49c/0x790 [ 411.479667] worker_thread+0x2b1/0x6e0 [ 411.479674] ? process_one_work+0x790/0x790 [ 411.479680] kthread+0x177/0x1b0 [ 411.479686] ? kthread_complete_and_exit+0x30/0x30 [ 411.479692] ret_from_fork+0x22/0x30 [ 411.479702] </TASK> | 15 h ago |
| CVE-2023-54219 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Revert "IB/isert: Fix incorrect release of isert connection" Commit: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") is causing problems on OPA when DEVICE_REMOVAL is happening. ------------[ cut here ]------------ WARNING: CPU: 52 PID: 2117247 at drivers/infiniband/core/cq.c:359 ib_cq_pool_cleanup+0xac/0xb0 [ib_core] Modules linked in: nfsd nfs_acl target_core_user uio tcm_fc libfc scsi_transport_fc tcm_loop target_core_pscsi target_core_iblock target_core_file rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill rpcrdma rdma_ucm ib_srpt sunrpc ib_isert iscsi_target_mod target_core_mod opa_vnic ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm hfi1(-) rdmavt ib_uverbs intel_rapl_msr intel_rapl_common sb_edac ib_core x86_pkg_temp_thermal intel_powerclamp coretemp i2c_i801 mxm_wmi rapl iTCO_wdt ipmi_si iTCO_vendor_support mei_me ipmi_devintf mei intel_cstate ioatdma intel_uncore i2c_smbus joydev pcspkr lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel drm_kms_helper drm_shmem_helper ahci libahci ghash_clmulni_intel igb drm libata dca i2c_algo_bit wmi fuse CPU: 52 PID: 2117247 Comm: modprobe Not tainted 6.5.0-rc1+ #1 Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 RIP: 0010:ib_cq_pool_cleanup+0xac/0xb0 [ib_core] Code: ff 48 8b 43 40 48 8d 7b 40 48 83 e8 40 4c 39 e7 75 b3 49 83 c4 10 4d 39 fc 75 94 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc <0f> 0b eb a1 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f RSP: 0018:ffffc10bea13fc80 EFLAGS: 00010206 RAX: 000000000000010c RBX: ffff9bf5c7e66c00 RCX: 000000008020001d RDX: 000000008020001e RSI: fffff175221f9900 RDI: ffff9bf5c7e67640 RBP: ffff9bf5c7e67600 R08: ffff9bf5c7e64400 R09: 000000008020001d R10: 0000000040000000 R11: 0000000000000000 R12: ffff9bee4b1e8a18 R13: dead000000000122 R14: dead000000000100 R15: ffff9bee4b1e8a38 FS: 00007ff1e6d38740(0000) GS:ffff9bfd9fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005652044ecc68 CR3: 0000000889b5c005 CR4: 00000000001706e0 Call Trace: <TASK> ? __warn+0x80/0x130 ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core] ? report_bug+0x195/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core] disable_device+0x9d/0x160 [ib_core] __ib_unregister_device+0x42/0xb0 [ib_core] ib_unregister_device+0x22/0x30 [ib_core] rvt_unregister_device+0x20/0x90 [rdmavt] hfi1_unregister_ib_device+0x16/0xf0 [hfi1] remove_one+0x55/0x1a0 [hfi1] pci_device_remove+0x36/0xa0 device_release_driver_internal+0x193/0x200 driver_detach+0x44/0x90 bus_remove_driver+0x69/0xf0 pci_unregister_driver+0x2a/0xb0 hfi1_mod_cleanup+0xc/0x3c [hfi1] __do_sys_delete_module.constprop.0+0x17a/0x2f0 ? exit_to_user_mode_prepare+0xc4/0xd0 ? syscall_trace_enter.constprop.0+0x126/0x1a0 do_syscall_64+0x5c/0x90 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exc_page_fault+0x65/0x150 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7ff1e643f5ab Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffec9103cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005615267fdc50 RCX: 00007ff1e643f5ab RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005615267fdcb8 RBP: 00005615267fdc50 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ff1e659eac0 R11: 0000000000000206 R12: 00005615267fdcb8 R13: 00000000000 ---truncated--- | 15 h ago |
| CVE-2026-50497 | 6.5 medium | 1.0% | microsoft, windows 10 version 1607, windows 10 version 1809, windows 10 version 21h2 | Off-by-one error in Windows Remote Desktop Protocol allows an unauthorized attacker to disclose information over a network. | 14 h ago |
| CVE-2026-117601 | 9.3 critical | 0.00% | no CPE yet | Electrum before 4.8.3 fails to verify signatures of wallet-owned inputs in unconfirmed mempool transactions, allowing malicious servers to replace a just-broadcast transaction with a conflicting one. Attackers can swallow the user's transaction and display an invalid zero-fee copy paying an attacker address, tricking users into RBF fee-bumping and signing it. | 18 h ago |
| CVE-2026-58255 | 8.8 high | 0.00% | no CPE yet | Cronicle is a multi-server task scheduler and runner, with a web based front-end UI. Prior to 0.9.121, a non-administrator user or scoped API key with `create_events` and `run_events` privileges can inject top-level `uid` and `gid` fields through `/api/app/create_event` or `/api/app/update_event`. In `lib/api.js`, `requireValidEventData` uses `validateOptionalParams` as a partial allow-list that silently passes unknown keys, storing the injected fields verbatim. In `lib/job.js`, `launchJob` copies the whole event into the job, and a plugin `uid` overrides the event `uid` only when the plugin defines one. The default `shellplug` and `urlplug` plugins do not define a `uid`, so the event-controlled identity survives into child-process launch. On a root-daemon installation, this lets a low-privileged user run jobs as arbitrary users, including root, bypassing the otherwise administrator-only run-as-user control. This API-side event injection is distinct from the job-output `uid`/`gid` injection addressed by CVE-2026-39401. This issue is fixed in version 0.9.121. | 17 h ago |
| CVE-2026-118669 | 8.4 high | — | no CPE yet | OAuthLib is an implementation of the OAuth request-signing logic for Python 3.6+. Prior to 4.0.0, the client_credentials and Resource Owner Password Credentials token grant handlers can authenticate request.client as one confidential client while retaining an attacker-supplied request.client_id for validate_grant_type and validate_scopes. A lower-privilege authenticated client can therefore cause grant and scope authorization to use another client's identity when an application validator relies on the documented client_id argument, potentially issuing tokens with unauthorized grants or scopes. Validators that authorize exclusively from request.client may not be affected. This issue is fixed in version 4.0.0. | 13 h ago |
| CVE-2026-63952 | 8.4 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done. | 16 h ago |
| CVE-2026-118665 | 8.2 high | — | no CPE yet | GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts retains request.extensions.connectionParams in the closure-scoped executorConnectionParams object after cleanupWebsocket closes a connection. When one executor is reused across different authorization contexts, a later request that omits a sensitive key can send an earlier caller's Authorization or tenant value in its connection_init payload, causing the downstream server to authenticate the later caller as the earlier user. Applications that create a new executor for every request are not affected. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. | 13 h ago |
| CVE-2026-118262 | 8.2 high | — | no CPE yet | Echo is a Go web framework. From 4.15.0 until 4.16.1 and 5.4.1, Echo's Proxy middleware can retain a handler, copy goroutines, and network connections after a WebSocket client disconnects when the upstream keeps its connection open. The raw proxy waits for both copy directions without reliably closing the peer connection when one direction ends, including when a rejected upgrade response uses HTTP keep-alive. Repeated connections can accumulate resources and cause denial of service, depending on proxy-route accessibility, upstream behavior, and connection deadlines. This issue is fixed in 4.16.1 and 5.4.1. | 15 h ago |
| CVE-2026-113776 | 7.8 high | 0.00% | no CPE yet | virtualenv is a tool for creating isolated virtual python environments. From 20.26.6 until 21.14.2, ViaTemplateActivator.instantiate_template() replaces placeholders one key at a time across the complete activation template, so trigger names such as __VIRTUAL_NAME__, __VIRTUAL_ENV__, or __VIRTUAL_PROMPT__ inside an already substituted and quoted environment path or prompt can be replaced during a later pass. The later value's quoting can close the earlier literal and execute the remaining path when a user activates the environment through bash, fish, xonsh, or activate_this.py. The distinct csh prompt-display token __VIRTUAL_PROMPT_DISPLAY_TCSH__ can instead break the generated script without establishing command execution. The attacker must influence the destination path or --prompt, and a value without a relevant placeholder name does not trigger this mechanism. This issue is fixed in version 21.14.2. | 19 h ago |
| CVE-2024-3056 | 7.7 high | — | red hat, red hat enterprise linux 10, red hat enterprise linux 7, red hat enterprise linux 8 | A flaw was found in Podman. This issue may allow an attacker to create a specially crafted container that, when configured to share the same IPC with at least one other container, can create a large number of IPC resources in /dev/shm. The malicious container will continue to exhaust resources until it is out-of-memory (OOM) killed. While the malicious container's cgroup will be removed, the IPC resources it created are not. Those resources are tied to the IPC namespace that will not be removed until all containers using it are stopped, and one non-malicious container is holding the namespace open. The malicious container is restarted, either automatically or by attacker control, repeating the process and increasing the amount of memory consumed. With a container configured to restart always, such as `podman run --restart=always`, this can result in a memory-based denial of service of the system. | 3 h ago |
| CVE-2026-96741 | 7.2 high | — | mlfactory, dsgvo all in one for wp | The DSGVO All in one for WP plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via Output Buffer Regex Corruption in all versions up to, and including, 5.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable when the administrator has enabled both the 'Google Tag Manager' integration and the 'Replace integration automatically [Beta]' option, and requires the crafted comment to be approved by an administrator. | 6 h ago |
| CVE-2026-109999 | 7.2 high | 0.00% | no CPE yet | The AI Marketing Expert — AI Email Marketing, AI Content Generator, SEO Analyzer, AI Workflow Automation, Social Media & Ai Chatbot plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'name' parameter in all versions up to, and including, 1.2.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires only that the chatbot module is active with at least one configured bot; the attacker stores the payload via three unauthenticated REST calls, and the JavaScript widget auto-poll then delivers it to any administrator who opens wp-admin/index.php. | 17 h ago |
| CVE-2026-118905 | 7.1 high | — | nvm-sh, nvm | Node Version Manager (nvm) is a POSIX-compliant shell function for managing multiple node.js versions. In versions 0.31.2 through 0.40.5, `nvm_ls` filters installed versions with a sed program that embeds the requested version pattern in a `\#...#` address, escaping `.` (and, since 0.40.4, `#`) but not backslash. A version string containing `#` (or `\#`) therefore closes the address early, and the rest of it is parsed as sed commands: with GNU sed, the `e` command runs a shell command as the user; with BSD sed, the `w` and `r` commands write and read files. This is reachable whenever an attacker-influenced version string is passed to `nvm use`, `nvm which`, `nvm ls`, `nvm version`, `nvm run`, or `nvm exec`, or to `nvm-exec` via `NODE_VERSION`, and at least one version is installed. nvm's own `.nvmrc` parser strips comments, so a bare `nvm use` is not affected; however, the bash `cdnvm` and zsh `load-nvmrc` auto-switch hooks documented in the README read `.nvmrc` as-is and pass it to `nvm ls` and `nvm version`, so a user with one of those hooks installed runs the attacker's command just by changing into a directory under a malicious `.nvmrc`; scripts that run `nvm use "$(cat .nvmrc)"` are affected the same way. Version 0.40.6 passes any version pattern containing `#` or a newline through the `.nvmrc` content parser first, so no `#` reaches the sed program. | 5 h ago |
| CVE-2026-114051 | 7.1 high | 0.00% | no CPE yet | vLLM before 0.31.0 skips the min_tokens <= max_tokens check for /inference/v1/generate requests with a null max_tokens, so the EngineCore input thread later dies on an uncaught VLLMValidationError while /health still returns 200. Unauthenticated remote attackers can send one request with an oversized min_tokens to hang all subsequent generation requests until manual restart. | 19 h ago |
| CVE-2026-63286 | 7.1 high | 0.00% | no CPE yet | Database backups are vulnerable to offline attacks. Backups created using a version prior to the patched version are still vulnerable. AXIS Camera Station Pro automatically creates one more such backup for recovery purpose when the update is applied. Delete all these backups and change the credentials stored in AXIS Camera Station Pro. | Wed 28 Oct |
| CVE-2026-118662 | 6.9 medium | — | no CPE yet | Vite is a frontend tooling framework for JavaScript. From 6.4.4 until 6.4.5, the Vite development server can evaluate server.fs.deny before stripping loader query parameters such as ?raw, ?import&raw, or ?import&url&inline. When the development server is exposed to the network and a sensitive file is inside server.fs.allow but matched by server.fs.deny, an unauthenticated attacker can append one of these queries and retrieve the denied file. This issue is fixed in version 6.4.5. | 13 h ago |
| CVE-2026-111967 | 6.8 medium | 0.00% | no CPE yet | The MP3 Audio Player WordPress plugin before 5.16 does not escape one of its audio player shortcode attributes before outputting it into an HTML attribute, allowing users with Contributor-level access and above to inject arbitrary JavaScript that executes when another user, such as an administrator previewing a pending post, views the content. | 16 h ago |
| CVE-2026-107098 | 6.8 medium | 0.00% | no CPE yet | The Royal Addons for Elementor WordPress plugin before 1.7.1070 does not sanitise and escape one of its map widget's size settings before concatenating it into an HTML attribute, allowing users with the Contributor role or above to inject JavaScript that runs in the browser of any user who views the page, including an administrator reviewing a pending submission. | 16 h ago |
| CVE-2026-87880 | 6.8 medium | — | no CPE yet | Sensitive information disclosure due to missing SSL certificate verification affecting one component. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587. | 20 h ago |
| CVE-2026-82411 | 6.5 medium | — | no CPE yet | Open Object provides an API and admin interface to manage objects and object types. From 2.4.3 until 2.5.1, 3.6.2, 4.0.2, and 4.1.1, a token scoped to read one ObjectType can read the full versioned record of an object of any other ObjectType via the history-detail endpoint `GET /api/v2/objects/{uuid}/{index}`. The `history_detail` action in `src/objects/api/v2/views.py` calls `self.get_queryset()` and `get_object_or_404` directly instead of `self.get_object()`, so `check_object_permissions` and the per-object check in `ObjectTypeBasedPermission.has_object_permission` are not invoked. The queryset's `filter_for_token` applies only to the list and search actions, while `ObjectTypeBasedPermission.has_permission` allows non-create actions, leaving neither check to constrain history-detail records to the token's permitted ObjectType. The normal retrieve endpoint returns 403 for the same unauthorized object, and the sibling history action enforces the grant. Any valid non-superuser API token with a read grant on at least one ObjectType can therefore disclose another ObjectType's complete versioned object `data`, which can include citizen or case records and sensitive identifiers in government deployments. This issue is fixed in versions 2.5.1, 3.6.2, 4.0.2, and 4.1.1. | 11 h ago |
| CVE-2026-115911 | 6.5 medium | 0.00% | vllm | vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.32.0, authenticated callers can supply a request chat template when no server-side --chat-template is configured, or a malicious model repository can provide a template that is compiled and rendered by tokenizer.apply_chat_template() without a wall-clock timeout, output-size limit, or iteration bound. Rendering runs in a ThreadPoolExecutor with one worker by default, so a nonterminating render can block /v1/responses and other chat-template users after the request ends, while an output-expanding render can exhaust server memory. Harmony models are not affected because they do not use this Jinja path. This issue is fixed in version 0.32.0. | 18 h ago |
| CVE-2026-115913 | 6.5 medium | 0.00% | vllm | vLLM is an inference and serving engine for large language models. Prior to 0.32.0, the Phi-4 multimodal audio encoder in phi4mm_audio.py and phi4mm_utils.py uses eager attention by default, allowing a remote client to submit one legal long audio clip that causes MultiHeadedAttention.forward_attention to materialize and retain full attention matrices in self.attn. The scaled dot-product attention branch does not materialize these matrices. The resulting quadratic GPU-memory use can cause an out-of-memory condition and terminate EngineCore for all users. This issue is fixed in version 0.32.0. | 18 h ago |
| CVE-2026-115916 | 6.5 medium | 0.00% | vllm | vLLM is an inference and serving engine for large language models. Prior to 0.32.0, vllm/tokenizers/hf.py computes max_token_id with an off-by-one upper bound, allowing a pre-tokenized prompt ID equal to the vocabulary size to pass validation. For a tensor-parallel size of one and an exact multiple-of-64 vocabulary, VocabParallelEmbedding.forward does not mask that value before F.embedding uses it, causing a CUDA device-side assertion and terminating the engine. This issue is fixed in version 0.32.0. | 18 h ago |
| CVE-2026-55369 | 6.5 medium | — | no CPE yet | Waline is a comment system with backend support. Prior to version 1.41.1, the login endpoint POST /api/token reads the email field from the request body without checking its type and passes it straight into the MongoDB storage query. When email is not a string (for example a JSON object such as {"$ne": null}), the MongoDB storage adapter's parseWhere silently DROPS the field rather than rejecting the request, producing an empty filter that matches ALL users. The endpoint then verifies the submitted password against the FIRST user returned (user[0]), which in Waline is the first-registered user — the site administrator. This is a PARTIAL authentication bypass, not a full one. The attacker still needs a valid password for that first user; this is not a zero-knowledge bypass and it does not disclose passwords. Its concrete effects are: (1) the email/identifier factor is removed for the administrator account, (2) user enumeration (a non-string email never fails the "no such user" branch), and (3) credential-stuffing amplification — an attacker can test a leaked or weak password against the administrator account without knowing the administrator's email. This issue has been patched in version 1.41.1. | 19 h ago |
| CVE-2026-54462 | 6.5 medium | 0.00% | no CPE yet | Knative pkg provides common packages shared across Knative repositories. Prior to 0.0.0-20260531000007-52dbd5ece63f, the knative.dev/pkg/webhook admissionHandler in webhook/admission.go decodes an attacker-supplied AdmissionReview through json.NewDecoder(io.TeeReader(r.Body, &bodyBuffer)) under an http.HandlerFunc without an http.MaxBytesReader or equivalent body-size limit. A pod-network client can send one oversized POST to an admission webhook, causing the decoder and bodyBuffer to retain amplified copies of the request until the controller pod exhausts memory and is OOM-killed. Every downstream consumer using the shared webhook server inherits the vulnerable behavior, including Knative, Tekton, KEDA, Sigstore policy-controller, and Kpack. For consumers configured with failurePolicy=Fail, loss of the controller can interrupt admission; with failurePolicy=Ignore, the affected webhook is unavailable while other admissions continue. This issue is fixed in version 0.0.0-20260531000007-52dbd5ece63f. | 19 h ago |
| CVE-2026-109209 | 6.4 medium | 0.00% | no CPE yet | The All-in-One Video Gallery – Video Player & Galleries for YouTube, Vimeo & Self-Hosted Videos plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'custom_fields[embedcode]' parameter in all versions up to, and including, 4.9.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The sanitization bypass is possible because the save_meta_data() handler returns early when $_POST['post_type'] is absent — a condition always true during XML-RPC requests — and the plugin unconditionally grants Subscribers the publish_aiovg_videos capability, making this exploitable by any authenticated user via a single wp.newPost XML-RPC call. | 20 h ago |
| CVE-2026-109974 | 6.4 medium | 0.00% | no CPE yet | The All-in-One Video Gallery – Video Player & Galleries for YouTube, Vimeo & Self-Hosted Videos plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'more_link' parameter in all versions up to, and including, 4.9.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 20 h ago |
| CVE-2026-92098 | 6.1 medium | 0.00% | no CPE yet | The Webheadcoder Multi-Step Forms for Contact Form 7 plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'l10n_print_after' parameter in all versions up to, and including, 4.7 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Successful exploitation requires that the targeted site has at least one Contact Form 7 form configured with a [multistep] form-tag, as the canonicalization introduced in version 4.7 blocks the attack path on non-multistep forms. | 18 h ago |
| CVE-2026-118173 | 6.1 medium | 0.00% | no CPE yet | MISP Guard, a proxy that enforces security policies on MISP feed data, contained an incomplete validation check for required taxonomy tags. When a feed event or its attributes carried tags belonging to a required taxonomy (for example, TLP), the guard only verified that at least one tag of that taxonomy matched the configured allowed list. It did not verify that every tag of the required taxonomy present on the event or attribute was in the allowed list. As a result, an event or attribute could simultaneously carry an allowed tag (e.g., tlp:clear) and a non-allowed tag (e.g., tlp:red or tlp:amber) and still pass the guard's policy check. This allowed data marked with a higher classification or sensitivity level to be distributed through feeds configured to only distribute lower-classification data, effectively bypassing the intended data-handling restrictions. The vulnerability affected both event-level and attribute-level tag validation, including attributes nested within objects and shadow attributes. An attacker with the ability to author or modify MISP events in a feed source could include non-allowed taxonomy tags alongside allowed ones to exfiltrate more sensitive data to feed consumers than the guard policy intended to permit. | 19 h ago |
| CVE-2026-118666 | 6.0 medium | — | no CPE yet | GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts reuses one WebSocket and replaces its single websocket.onmessage handler whenever a new overlapping subscription starts. The handler delivers LEGACY_WS.DATA frames to the newest observer without comparing data.id with the subscription operation id, so a caller using the same executor can receive another user's authorized subscription payload while the earlier caller's stream is starved. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. | 13 h ago |
| CVE-2023-53658 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: spi: bcm-qspi: return error if neither hif_mspi nor mspi is available If neither a "hif_mspi" nor "mspi" resource is present, the driver will just early exit in probe but still return success. Apart from not doing anything meaningful, this would then also lead to a null pointer access on removal, as platform_get_drvdata() would return NULL, which it would then try to dereference when trying to unregister the spi master. Fix this by unconditionally calling devm_ioremap_resource(), as it can handle a NULL res and will then return a viable ERR_PTR() if we get one. The "return 0;" was previously a "goto qspi_resource_err;" where then ret was returned, but since ret was still initialized to 0 at this place this was a valid conversion in 63c5395bb7a9 ("spi: bcm-qspi: Fix use-after-free on unbind"). The issue was not introduced by this commit, only made more obvious. | 14 h ago |
| CVE-2023-53687 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks. | 15 h ago |
| CVE-2026-98098 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid. | 15 h ago |
| CVE-2026-98113 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log. | 15 h ago |
| CVE-2026-114121 | 5.4 medium | 0.00% | no CPE yet | Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5, requests to open external protocol URLs could be attributed to a document other than the one that initiated them, causing the requestingUrl passed to session.setPermissionRequestHandler to identify trusted content for a launch requested by untrusted content. An application that grants openExternal based on the requesting origin and allows untrusted content to open or navigate windows could therefore allow that content to launch an OS-registered external application. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5. | 17 h ago |
| CVE-2026-95664 | 5.4 medium | 0.00% | apache, camel | Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. | 18 h ago |
| CVE-2026-55561 | 5.3 medium | — | no CPE yet | InvoicePlane is a self-hosted open source application for managing invoices, clients, and payments. Prior to 1.7.2-beta-1, guest users can approve or reject quotes belonging to any client, not just their assigned clients. The `approve()` and `reject()` methods in the Guest Quotes controller, `application/modules/guest/controllers/Quotes.php`, call `approve_quote_by_id($quote_id)` and `reject_quote_by_id($quote_id)` directly without the `where_in('ip_quotes.client_id', $this->user_clients)` scoping that sibling methods use. A guest user assigned to one client can change another client's quote status by supplying sequential integer `quote_id` values, and `email_quote_status()` also sends notification emails. Additionally, `generate_pdf()` calls `mark_viewed($quote_id)` before checking the client scope, allowing a guest user to mark another client's quote as viewed. These issues are fixed in version 1.7.2-beta-1 and the subsequent stable version 1.7.2. | 11 h ago |
| CVE-2026-115255 | 5.3 medium | 0.00% | no CPE yet | The WP Roster WordPress plugin before 2.35 does not perform any capability or nonce checks on one of its AJAX actions, allowing unauthenticated attackers to delete the WordPress user accounts of roster members. | 16 h ago |
| CVE-2026-110508 | 5.3 medium | — | no CPE yet | The Essential Addons for Elementor WordPress plugin before 6.8.7 does not apply its administrator approval requirement to accounts registered through its email one-time-password flow, which could allow unauthenticated users to register and log in without being approved by an administrator when both features are enabled. | 16 h ago |
| CVE-2026-106003 | 5.3 medium | 0.00% | no CPE yet | The Court Reservation WordPress plugin before 1.12.4 does not perform any authorization, authentication or nonce validation on one of its AJAX actions, allowing unauthenticated users to add or delete reservation types in the Court Reservation WordPress plugin before 1.12.4's configuration. | 16 h ago |
| CVE-2026-106002 | 5.3 medium | 0.00% | no CPE yet | The Court Reservation WordPress plugin before 1.12.4 does not perform any authorisation or nonce verification on one of its challenge-management actions, allowing unauthenticated users to delete arbitrary tournament-ladder challenge records, along with the linked court-booking event when one was scheduled. | 16 h ago |
| CVE-2026-101273 | 5.3 medium | — | no CPE yet | Some of our API endpoints allowed to create order payments referencing a gift card by using the auto-incremented internal ID. This ID was not checked and allowed creating payments that reference gift cards from different organizers and thereby obtaining their secret. The gift card is not charged in this case, but by then triggering a refund on the payment, one can increase the value of the gift card. | 19 h ago |
| CVE-2026-115522 | 5.3 medium | 0.00% | no CPE yet | Exposure of Resource to Wrong Sphere (CWE-668) in FileArtifactService in Google Agent Development Kit (ADK) for Python (google-adk) versions 1.19.0 before 1.39.1 and 2.0.0a1 before 2.7.0 allows a caller in one application to list, read, overwrite, or delete artifacts belonging to another application when both applications share a FileArtifactService root directory and use the same user_id (and session_id for session-scoped artifacts). FileArtifactService accepted app_name across its public API methods but omitted app_name when constructing on-disk paths (root/users/{user_id}/... instead of root/apps/{app_name}/users/{user_id}/...). Version 2.6.0 scoped writes by app_name but retained a legacy root/users/{user_id} fallback for reads and deletes; version 2.7.0 and the 1.x backport in version 1.39.1 removed the fallback and enforce full per-app path scoping. | Wed 28 Oct |
| CVE-2026-111960 | 4.3 medium | 0.00% | no CPE yet | The Royal MCP WordPress plugin before 1.5.10 does not perform object-level or post-type authorisation checks in one of its search tools, allowing authenticated users such as a subscriber to disclose the title and content of non-public entries, including personal data stored by a companion Royal MCP WordPress plugin before 1.5.10. | 16 h ago |
| CVE-2026-109979 | 4.3 medium | 0.00% | no CPE yet | The Related Posts for WordPress plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to, and including, 3.0.0 via the 'rp4wp_create_link' parameter of the hidden 'rp4wp_link_related' admin page. The handle_create_link() handler verifies the nonce and that the current user can edit the parent post, but never checks that the attacker-supplied child post ID is one the user is allowed to read; LinkRepository::insert() stores the arbitrary child ID without validation, and ManageLinks::render() later calls LinkRepository::get_children() in its no-extra-args fast path, which falls through to array_map('get_post', $child_ids) — bypassing read_private_posts/read_post capability checks — and then echoes esc_html($child->post_title) in the parent's editor meta box. This makes it possible for authenticated attackers, with Contributor-level access and above, to read the titles of arbitrary non-public posts (drafts, pending, private, future, trashed) authored by higher-privileged users by linking those post IDs to a draft they own and then reading the resulting meta box. | 20 h ago |
| CVE-2026-118030 | 4.2 medium | — | red hat, red hat build of keycloak, red hat single sign-on 7 | A flaw was found in the HOTP authentication mechanism of the keycloak-services component, which provides identity and access management services. The issue occurs because the system validates a one-time password and updates its internal counter in two separate steps without proper locking. An attacker with a users password could exploit this timing gap to use a single one-time code to log in multiple times simultaneously. | 4 h ago |
| CVE-2026-115259 | unscored | — | unknown, photo engine (media organizer & lightroom) | The Photo Engine (Media Organizer & Lightroom) WordPress plugin before 6.6.0 does not have proper authorization checks when updating post data through one of its REST API routes in all versions up to, and including, 6.5.8. This makes it possible for authenticated attackers, with Author-level access and above, to modify the title, content, excerpt and other fields of arbitrary posts, pages and attachments, including those belonging to other users. | 4 h ago |
50 of 111 · Next
Download these 111 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.