Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2021-41277KEVexploit ×12 | 7.5 high | 97.0% | metabase | Metabase is an open source data analytics platform. In affected versions a security issue has been discovered with the custom GeoJSON map (`admin->settings->maps->custom maps->add a map`) support and potential local file inclusion (including environment variables). URLs were not validated prior to being loaded. This issue is fixed in a new maintenance release (0.40.5 and 1.40.5), and any subsequent release after that. If you’re unable to upgrade immediately, you can mitigate this by including rules in your reverse proxy or load balancer or WAF to provide a validation filter before the application. | 8 Oct |
| CVE-2018-1304exploit ×2 | 5.9 medium | 17.0% | apache, redhat, tomcat, jboss_enterprise_application_platform, jboss_enterprise_web_server | The URL pattern of "" (the empty string) which exactly maps to the context root was not correctly handled in Apache Tomcat 9.0.0.M1 to 9.0.4, 8.5.0 to 8.5.27, 8.0.0.RC1 to 8.0.49 and 7.0.0 to 7.0.84 when used as part of a security constraint definition. This caused the constraint to be ignored. It was, therefore, possible for unauthorised users to gain access to web application resources that should have been protected. Only security constraints with a URL pattern of the empty string were affected. | 15 Oct |
| CVE-2026-33453exploit ×2 | 10.0 critical | 9.0% | apache, camel | Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component. Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec) The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy. Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all. As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process. The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration. Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0. Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue. | Mon 26 Oct |
| CVE-2026-46454exploit | 9.8 critical | 1.0% | apache, camel | Improper Input Validation vulnerability in Apache Camel Cometd Component. The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish. | Sun 25 Oct |
| CVE-2026-46591exploit | 8.2 high | 1.0% | apache, camel | Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component. The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header. This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender. | Sun 25 Oct |
| CVE-2026-46457exploit | 7.5 high | 1.0% | apache, camel | Improper Input Validation vulnerability in Apache Camel NATS component. The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default). This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject. | Sun 25 Oct |
| CVE-2026-63621exploit | 5.3 medium | 1.0% | apache, camel | Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Knative component The Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel's header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453). This issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0. | 12 Oct |
| CVE-2026-39492exploit | 9.3 critical | 0.00% | no CPE yet | Unauthenticated SQL Injection in WP Maps <= 4.9.1 versions. | Sun 25 Oct |
| CVE-2026-46316exploit | 9.3 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry vgic_its_invalidate_cache() walks the per-ITS translation cache with xa_for_each() and drops the cache's reference on each entry with vgic_put_irq(). It puts the iterated pointer, though, rather than the value returned by xa_erase(). The function is called from contexts that do not exclude one another: the ITS command handlers hold its_lock, the GITS_CTLR write path holds cmd_lock, and the path that clears EnableLPIs in a redistributor's GICR_CTLR holds neither. Two or more of them can drain the same cache concurrently, and if each one observes the same entry, erases it and then puts it, the single reference the cache holds on that entry is dropped more than once. The entry can then be freed while an ITE still maps it. xa_erase() is atomic and returns the previous entry, so put only the entry that this context actually removed. The cache reference is then dropped exactly once per entry even when the invalidations run concurrently, and the behavior is unchanged when only one context runs. | 19 Oct |
| CVE-2026-74580exploit ×4 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vhost: reset the vring metadata cache on vring reconfiguration vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring metadata region, and iotlb_access_ok() returns early on a cache hit, taking the hit as proof that the region has already been validated: if (vhost_vq_meta_fetch(vq, addr, len, type)) return true; The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on device IOTLB (re)initialisation and on vq reset, but not when VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when VHOST_SET_VRING_NUM changes the region sizes. With a device IOTLB attached both ioctls are accepted while the vq is live, and neither validates the addresses at ioctl time: vq_access_ok() and vq_log_used_access_ok() return true early because the addresses are GIOVAs, deferring validation to prefetch time. Once the cache has been populated that deferred validation no longer runs -- vq_meta_prefetch() hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps translating through the old mapping as map->addr + addr - map->start for an address the mapping no longer covers. vhost_copy_to_user() and vhost_copy_from_user() consume the result with __copy_to_user() and __copy_from_user(), which do not check it either, so a subsequent used ring update or descriptor fetch accesses memory outside the region the IOTLB actually maps. Reset the metadata cache whenever the vring is reconfigured, so the new addresses are pushed back through iotlb_access_ok()'s slow path. | Wed 28 Oct |
| CVE-2025-40123exploit | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce expected_attach_type for tailcall compatibility Yinhao et al. recently reported: Our fuzzer tool discovered an uninitialized pointer issue in the bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem. This leads to a NULL pointer dereference when a BPF program attempts to deference the txq member of struct xdp_buff object. The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the entry point for bpf_prog_test_run_xdp() and its expected_attach_type can neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP to pass xdp_is_valid_access() validation. The program returns struct xdp_md's egress_ifindex, and the latter is only allowed to be accessed under mentioned expected_attach_type. progB is then inserted into the tailcall which progA calls. The underlying issue goes beyond XDP though. Another example are programs of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well as sock_addr_func_proto() have different logic depending on the programs' expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME should not be allowed doing a tailcall into a program which calls bpf_bind() out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT. In short, specifying expected_attach_type allows to open up additional functionality or restrictions beyond what the basic bpf_prog_type enables. The use of tailcalls must not violate these constraints. Fix it by enforcing expected_attach_type in __bpf_prog_map_compatible(). Note that we only enforce this for tailcall maps, but not for BPF devmaps or cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and cpu_map_bpf_prog_run*() which set up a new environment / context and therefore these situations are not prone to this issue. | 19 Oct |
| CVE-2026-56011exploit | 7.1 high | 0.00% | no CPE yet | Unauthenticated Cross Site Scripting (XSS) in MapPress Maps for WordPress <= 2.97.3 versions. | Sun 25 Oct |
| CVE-2025-38502exploit | 7.1 high | 0.00% | linux, debian, linux_kernel, debian_linux, simatic_cn_4100_firmware | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps. | 15 Oct |
| CVE-2026-95628exploit | 5.4 medium | 0.00% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. | Mon 26 Oct |
| CVE-2026-95629exploit | 5.4 medium | 0.00% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. | Mon 26 Oct |
15 of 15
Download these 15 as CSV · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.