Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-39682KEVexploit ×2 | 9.8 critical | 3.0% | linux, debian, linux_kernel, debian_linux, simatic_cn_4100_firmware | In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | 19 Oct |
| CVE-2023-25136exploit ×11 | 6.5 medium | 90.0% | openbsd, fedoraproject, openssh, fedora, ontap_select_deploy_administration_utility | OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states "remote code execution is theoretically possible." | 14 Oct |
| CVE-2022-36946exploit ×2 | 7.5 high | 9.0% | linux, debian, linux_kernel, debian_linux, active_iq_unified_manager | nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb->len. | 14 Oct |
| CVE-2024-12085exploit | 7.5 high | 9.0% | samba, redhat, rsync, openshift, openshift_container_platform | A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. | 13 Oct |
| CVE-2021-22924exploit | 3.7 low | 6.0% | haxx, fedoraproject, libcurl, fedora, debian_linux | libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert' into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can setto qualify how to verify the server certificate. | 14 Oct |
| CVE-2026-94169exploit | 10.0 critical | 4.0% | no CPE yet | Improper Control of Generation of Code ('Code Injection') vulnerability in Theme-one The Grid the-grid allows Command Injection.This issue affects The Grid: from n/a through 2.8.1. | 16 Oct |
| CVE-2026-46333exploit ×7 | 7.1 high | 4.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: ptrace: slightly saner 'get_dumpable()' logic The 'dumpability' of a task is fundamentally about the memory image of the task - the concept comes from whether it can core dump or not - and makes no sense when you don't have an associated mm. And almost all users do in fact use it only for the case where the task has a mm pointer. But we have one odd special case: ptrace_may_access() uses 'dumpable' to check various other things entirely independently of the MM (typically explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for threads that no longer have a VM (and maybe never did, like most kernel threads). It's not what this flag was designed for, but it is what it is. The ptrace code does check that the uid/gid matches, so you do have to be uid-0 to see kernel thread details, but this means that the traditional "drop capabilities" model doesn't make any difference for this all. Make it all make a *bit* more sense by saying that if you don't have a MM pointer, we'll use a cached "last dumpability" flag if the thread ever had a MM (it will be zero for kernel threads since it is never set), and require a proper CAP_SYS_PTRACE capability to override. | 15 Oct |
| CVE-2026-49468exploit | 9.5 critical | 3.0% | litellm | LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.84.0, a Host-header parsing flaw in the LiteLLM proxy could, under specific conditions, allow unauthenticated access to protected management routes. The auth layer derived the effective route from request.url.path in litellm/proxy/auth/auth_utils.py::get_request_route(), which Starlette reconstructs from the Host header. A crafted Host could therefore make the auth gate evaluate a different route from the one FastAPI dispatched. This vulnerability is fixed in 1.84.0. | Sun 25 Oct |
| CVE-2018-16156exploit ×2 | 7.8 high | 3.0% | fujitsu, paperstream_ip_\(twain\) | In PaperStream IP (TWAIN) 1.42.0.5685 (Service Update 7), the FJTWSVIC service running with SYSTEM privilege processes unauthenticated messages received over the FjtwMkic_Fjicube_32 named pipe. One of these message processing functions attempts to dynamically load the UninOldIS.dll library and executes an exported function named ChangeUninstallString. The default install does not contain this library and therefore if any DLL with that name exists in any directory listed in the PATH variable, it can be used to escalate to SYSTEM level privilege. | 8 Oct |
| CVE-2026-53595exploit | 9.4 critical | 2.0% | no CPE yet | FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the public endpoint `POST /user-setup/{hash}/{invite_sent_at}` (`OpenController@userSetupSave`) selects the target account solely by its `invite_hash` column, then overwrites that account's email and password and logs in as it. No authentication, cookie, or prior session is required. After a user activates, FreeScout sets `invite_hash` to the empty string. On MySQL and MariaDB, `VARCHAR` equality ignores trailing spaces, so a single URL-encoded space (`%20`) matches the stored empty string and selects the lowest-id activated user. The expiry guard decrypts `invite_sent_at` with the target's password hash, but `Helper::decrypt` returns its raw input unchanged when decryption fails. A plaintext numeric value such as `9999999999` therefore passes the time-to-live check without any secret. The result is that an anonymous attacker sets the email and password of the lowest-id activated FreeScout account (a support agent, or an administrator if one was added by invitation) and authenticates as that account. Version 1.8.224 contains a fix. | Sat 24 Oct |
| CVE-2026-43503exploit ×10 | 8.8 high | 2.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. | 16 Oct |
| CVE-2026-39983exploit | 8.6 high | 2.0% | patrickjuchli, basic-ftp | basic-ftp is an FTP client for Node.js. Prior to 5.2.1, basic-ftp allows FTP command injection via CRLF sequences (\r\n) in file path parameters passed to high-level path APIs such as cd(), remove(), rename(), uploadFrom(), downloadTo(), list(), and removeDir(). The library's protectWhitespace() helper only handles leading spaces and returns other paths unchanged, while FtpContext.send() writes the resulting command string directly to the control socket with \r\n appended. This lets attacker-controlled path strings split one intended FTP command into multiple commands. This vulnerability is fixed in 5.2.1. | Mon 26 Oct |
| CVE-2026-42779exploit | 9.8 critical | 1.0% | apache, mina | The fix for CVE-2026-41635 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade. | Mon 26 Oct |
| CVE-2026-62183exploit | 9.8 critical | 1.0% | apache, syncope | Improper Privilege Management vulnerability in Apache Syncope. When: * the all-Java user workflow adapter is configured, or * the Flowable user workflow adapter is configured, bearing a BPMN definition not requiring admin approval for user self registration of self update requests the following scenario could happen. A REST API call can allow the user to grant themselves one or more of defined Roles, thus gaining their Entitlements and becoming in fact an administrator; the actual Entitlements gained depend on the Roles that are effectively defined on the specific Syncope deployment. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue. | Sat 24 Oct |
| CVE-2026-59243exploit ×2 | 9.8 critical | 1.0% | apache, apache-airflow-providers-fab | The FAB auth manager's Azure AD OAuth login defaulted `verify_signature=False` when decoding the ID token, so an attacker able to present a forged or unsigned (`alg:none`) ID token to the OAuth callback could bypass authentication and log in as an arbitrary user, including one holding the Admin role (CWE-347). Deployments running the FAB auth manager with the Azure AD OAuth login path under its default configuration are affected; the Authentik path already defaulted to `True`. This issue affects `apache-airflow-providers-fab` before 3.7.3. Users are advised to upgrade to `apache-airflow-providers-fab` 3.7.3, which defaults `verify_signature=True`. | Fri 23 Oct |
| CVE-2026-52924exploit | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | 19 Oct |
| CVE-2026-43501exploit ×2 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | 19 Oct |
| CVE-2026-31402exploit ×2 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. | 19 Oct |
| CVE-2026-71300exploit | 9.8 critical | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel Atmosphere Websocket component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first. | 12 Oct |
| CVE-2026-78329exploit | 9.8 critical | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel Undertow component. This issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. UndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(“websocket.*”). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself. | 12 Oct |
| CVE-2026-17566exploit | 9.4 critical | 1.0% | pgadmin, pgadmin_4 | pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor). The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing. This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18. | Fri 23 Oct |
| CVE-2026-66906exploit | 9.1 critical | 1.0% | apache, camel | Relative path traversal vulnerability in Apache Camel Azure Storage Blob component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them. | 12 Oct |
| CVE-2026-19949exploit ×3 | 8.8 high | 1.0% | no CPE yet | The All-in-One WP Migration and Backup plugin for WordPress is vulnerable to SQL Injection via archive restore functionality in all versions up to, and including, 7.109 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This can be leveraged to obtain the ai1wm_secret_key when a site administrator performs an archive restore and achieve remote code execution once able to leverage the ai1wm_secret_key value. | Sat 24 Oct |
| CVE-2026-74469exploit ×4 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | 16 Oct |
| CVE-2025-59532exploit | 8.6 high | 1.0% | no CPE yet | Codex CLI is a coding agent from OpenAI that runs locally. In versions 0.2.0 to 0.38.0, due to a bug in the sandbox configuration logic, Codex CLI could treat a model-generated cwd as the sandbox’s writable root, including paths outside of the folder where the user started their session. This logic bypassed the intended workspace boundary and enables arbitrary file writes and command execution where the Codex process has permissions - this did not impact the network-disabled sandbox restriction. This issue has been patched in Codex CLI 0.39.0 that canonicalizes and validates that the boundary used for sandbox policy is based on where the user started the session, and not the one generated by the model. Users running 0.38.0 or earlier should update immediately via their package manager or by reinstalling the latest Codex CLI to ensure sandbox boundaries are enforced. If using the Codex IDE extension, users should immediately update to 0.4.12 for a fix of the sandbox issue. | 11 Oct |
| CVE-2026-68749exploit | 8.2 high | 1.0% | rrrene, htmlsanitizeex | Inefficient Regular Expression Complexity vulnerability in the CSS scrubber in rrrene html_sanitize_ex allows an unauthenticated remote attacker to exhaust server CPU via a long CSS declaration in sanitized HTML. The declaration regex in HtmlSanitizeEx.Scrubber.CSS.scrub/1 matches the property name with an unbounded greedy [-\w]+ followed by a mandatory :, so a long run of word characters not followed by a colon makes the engine give back one character at a time and retry the colon at every start offset. The work is quadratic in the length of the run, and no length cap is applied to the CSS handed to the scrubber. An 80 KB <style> body costs roughly 2.4 seconds of scheduler time, so a few concurrent requests saturate the BEAM scheduler pool and make the application unresponsive. The impact is CPU exhaustion only. Nothing is read, modified or disclosed. This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3. | Sat 24 Oct |
| CVE-2026-25524exploit | 8.1 high | 1.0% | openmage, magento | Magento Long Term Support (LTS) is an unofficial, community-driven project provides an alternative to the Magento Community Edition e-commerce platform with a high level of backward compatibility. Prior to version 20.17.0, PHP functions such as `getimagesize()`, `file_exists()`, and `is_readable()` can trigger deserialization when processing `phar://` stream wrapper paths. OpenMage LTS uses these functions with potentially controllable file paths during image validation and media handling. An attacker who can upload a malicious phar file (disguised as an image) and trigger one of these functions with a `phar://` path can achieve arbitrary code execution. Version 20.17.0 patches the issue. | Mon 26 Oct |
| CVE-2025-12758exploit | 7.7 high | 1.0% | validator_project, validator | Versions of the package validator before 13.15.22 are vulnerable to Incomplete Filtering of One or More Instances of Special Elements in the isLength() function that does not take into account Unicode variation selectors (\uFE0F, \uFE0E) appearing in a sequence which lead to improper string length calculation. This can lead to an application using isLength for input validation accepting strings significantly longer than intended, resulting in issues like data truncation in databases, buffer overflows in other system components, or denial-of-service. | 19 Oct |
| CVE-2026-46592exploit | 7.5 high | 1.0% | apache, camel | Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route. | Sun 25 Oct |
| CVE-2026-66907exploit | 7.5 high | 1.0% | apache, camel | Relative path traversal vulnerability in Apache Camel Google Storage component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them. | Sat 24 Oct |
| CVE-2026-66908exploit | 7.5 high | 1.0% | apache, camel | Improper Authentication vulnerability in Apache Camel Platform HTTP Main component. This issue affects Apache Camel: from 4.8.0 before 4.22.0. The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all. Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed. Notes: The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details. The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available. | Sat 24 Oct |
| CVE-2026-85250exploit | 7.5 high | 1.0% | no CPE yet | Improper Restriction of XML External Entity Reference vulnerability in Apache Camel XPath component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. With documentType set to InputSource, XPathBuilder handed the payload straight to javax.xml.xpath, which builds a DocumentBuilder of its own using the JDK defaults. The hardening applied to Camel's default document type was therefore bypassed: a DOCTYPE declaration that is refused on the default type was accepted here, and the external entity it declared was resolved and expanded into the evaluated document. An external sender whose XML reaches such an expression could read files readable by the Camel process and cause the process to issue requests to hosts it names. The two document types disagreeing on parser configuration is what made this reachable, since a deployment choosing InputSource for streaming reasons had no indication it was also choosing a weaker parser. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The InputSource document type now goes through the same hardened parser as the default type, so a DOCTYPE is refused. Note that it also shares that type's documented escape hatch: the same DocumentBuilderFactory system properties that relax the default type relax this one, so a deployment that has set them remains unprotected by design. For deployments that cannot upgrade immediately, do not use documentType=InputSource on expressions evaluated over untrusted XML; the default document type already refuses a DOCTYPE. | 19 Oct |
| CVE-2023-23946exploit ×2 | 7.5 high | 1.0% | git-scm, git | Git, a revision control system, is vulnerable to path traversal prior to versions 2.39.2, 2.38.4, 2.37.6, 2.36.5, 2.35.7, 2.34.7, 2.33.7, 2.32.6, 2.31.7, and 2.30.8. By feeding a crafted input to `git apply`, a path outside the working tree can be overwritten as the user who is running `git apply`. A fix has been prepared and will appear in v2.39.2, v2.38.4, v2.37.6, v2.36.5, v2.35.7, v2.34.7, v2.33.7, v2.32.6, v2.31.7, and v2.30.8. As a workaround, use `git apply --stat` to inspect a patch before applying; avoid applying one that creates a symbolic link and then creates a file beyond the symbolic link. | 8 Oct |
| CVE-2026-79985exploit | 7.4 high | 1.0% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel SMB component. This issue affects Apache Camel: from 4.2.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the smb scheme. Its consumer walks the share listing on its own rather than through RemoteFileConsumer, skipping only the exact "." and ".." entries, so a name carrying traversal segments in any other form was concatenated unchecked. Reaching it requires a server that emits a listing name which is not a single path segment, which a conforming SMB2 implementation does not do; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | 20 Oct |
| CVE-2026-79984exploit | 7.4 high | 1.0% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component. This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | 20 Oct |
| CVE-2026-79983exploit | 7.4 high | 1.0% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | 20 Oct |
| CVE-2026-79986exploit | 7.4 high | 1.0% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | 20 Oct |
| CVE-2026-11417exploit | 7.0 high | 1.0% | no CPE yet | OS command injection in the NodejsFunction local bundling pipeline in aws-cdk-lib before 2.245.0 (2.246.0 on Windows) might allow an actor who controls the value of one or more bundling properties (externalModules, define, loader, inject, or esbuildArgs) to execute arbitrary commands on the host running the CDK toolchain via injected shell metacharacters. This issue requires the threat actor to control the value of one or more of the affected bundling properties in the CDK application. To remediate this issue, users should upgrade to aws-cdk-lib 2.245.0 (2.246.0 on Windows) or later. | Mon 26 Oct |
| CVE-2026-49086exploit | 6.5 medium | 1.0% | apache, camel | Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component. The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed. This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it. | Sun 25 Oct |
| CVE-2026-59230exploit | 6.5 medium | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel. This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel*”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input. | 12 Oct |
| CVE-2026-23003exploit | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 | 19 Oct |
| CVE-2026-52782exploit | 9.9 critical | 0.00% | no CPE yet | OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, there is an IDOR through /projects/<A>/settings/project_storages/<A_ps_id> via PATCH parameter "storages_project_storage[project_folder_id]" leads to Access to Unauthorized Resources. A project-admin in one project can hijack the managed Nextcloud or OneDrive folder of another project on the same storage by writing the victim project's project_folder_id into the attacker's Storages::ProjectStorage row. The next managed-folder sync overwrites the ACL on the referenced folder with the attacker project's user list. This vulnerability is fixed in 17.3.3 and 17.4.1. | Sun 25 Oct |
| CVE-2026-114612exploit | 9.9 critical | 0.00% | no CPE yet | LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From 1.87.0 until 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2, the proxy reuses one cryptographic context for at-rest secrets and session tokens, allowing an authenticated internal user to have crafted metadata containing a forged administrator credential encrypted and returned by the API-key flow. Replaying that ciphertext as a bearer token causes the proxy to trust the forged proxy administrator identity, permitting administrative access and arbitrary commands through the MCP stdio endpoint. Versions 1.87.0 through 1.90.x require EXPERIMENTAL_UI_LOGIN to be enabled, while versions after 1.91.0 are exploitable in the default configuration. This issue was fixed in LiteLLM 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2. | Fri 23 Oct |
| CVE-2026-52993exploit | 9.8 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations. | 19 Oct |
| CVE-2026-59891exploit | 9.6 critical | 0.00% | no CPE yet | sigstore-js provides JavaScript libraries for interacting with Sigstore services. Prior to 0.7.1, getRegistryCredentials() reads credentials from the Docker config file and selects an entry by checking whether any configured auth key contains the target registry string. Because this is a substring match rather than an exact host match, credentials configured for one registry can be selected for and transmitted to a different registry whose hostname has a substring relationship with a configured auth key. This issue is fixed in version 0.7.1. | Sat 24 Oct |
| CVE-2026-17351exploit | 9.4 critical | 0.00% | pgadmin, pgadmin_4 | The fix for CVE-2026-12045 in pgAdmin 4 9.16 required the LLM-supplied query passed to the AI Assistant's execute_sql_query tool to parse, via sqlparse, as exactly one non-transaction-control statement before running it inside a BEGIN TRANSACTION READ ONLY wrapper. sqlparse's string-literal lexing can disagree with PostgreSQL's own parser: under standard_conforming_strings = on (PostgreSQL's default since 9.1), a backslash immediately before a quote is an ordinary character to PostgreSQL, but sqlparse treats it as escaping the quote. A payload such as SELECT '\';COMMIT;CREATE TABLE pwn(x int);SELECT 1 --' therefore parses as a single SELECT to sqlparse's validator, while PostgreSQL executes it as four statements: the smuggled COMMIT ends the wrapping read-only transaction, and the trailing ROLLBACK becomes a no-op. This reintroduces the same write/RCE bypass CVE-2026-12045 was meant to close, reachable via the same indirect prompt-injection delivery (an attacker plants the payload in any object the AI Assistant may read; the LLM emits it as a tool call). An initial candidate fix ran the query with psycopg's execute(..., prepare=True), intending to force PostgreSQL's own Parse step (extended query protocol) to reject multi-statement text regardless of sqlparse's classification. This candidate fix does not work as submitted: psycopg3's PrepareManager silently ignores the prepare argument whenever the connection's prepare_threshold is None, which is pgAdmin's default for every server connection (the per-server "Prepare threshold" field is blank unless an administrator explicitly sets it) -- psycopg3 falls back to the simple query protocol, the same multi-statement-capable path the bypass exploits, so the candidate fix closes nothing on any real-world default configuration. The corrected fix sets conn.prepare_threshold = 0 directly on the dedicated, single-use read-only connection the AI Assistant tool opens, structurally forcing the extended query protocol independent of any server-level configuration. Verified against a live PostgreSQL 18 instance: the payload executes successfully under the prepare_threshold=None (default) behavior, and is rejected with "cannot insert multiple commands into a prepared statement" once prepare_threshold=0 is set on that connection. This issue affects pgAdmin 4: from 9.13 before 9.17. | Fri 23 Oct |
| CVE-2026-77812exploit | 9.4 critical | 0.00% | no CPE yet | DJI drones transmit DUML (DJI Universal Markup Language) protocol messages over BLE (Bluetooth Low Energy) without encryption. When a client attempts to connect to the drone over Wi-Fi, or when the drone is switched to QuickTransfer mode, the DJI Fly application exchanges DUML messages with the drone over BLE, including the Wi-Fi credentials. An attacker within BLE range can passively sniff this traffic and recover the credentials in cleartext, including the drone's Wi-Fi PSK, SSID, and trusted identifier UUID. Obtaining these credentials allows the attacker to join the drone's internal Wi-Fi network, interact with network services exposed by the drone, and decrypt Wi-Fi traffic exchanged between the drone and the legitimate user. * An attacker within BLE range recovers the Wi-Fi SSID and PSK in cleartext, and can then join the drone's network * The same capture also exposes the session UUID identifier, which is the only thing the drone uses to tell a trusted client from an unknown one, so the attacker can replay it and skip the physical confirmation of new connected devices. * The credentials do not change between sessions unless the operator manually resets the Wi-Fi settings, so one capture stays valid indefinitely * The attack is fully passive, with nothing transmitted and no connection made, so neither the operator nor the drone has any indication the session was observed * A BLE sniffer and presence during one normal DJI Fly connection are needed Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600. Remediation requires a firmware update from the vendor. There is no user-side mitigation that fully addresses the vulnerability without upgrading. | 15 Oct |
| CVE-2026-46316exploit | 9.3 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry vgic_its_invalidate_cache() walks the per-ITS translation cache with xa_for_each() and drops the cache's reference on each entry with vgic_put_irq(). It puts the iterated pointer, though, rather than the value returned by xa_erase(). The function is called from contexts that do not exclude one another: the ITS command handlers hold its_lock, the GITS_CTLR write path holds cmd_lock, and the path that clears EnableLPIs in a redistributor's GICR_CTLR holds neither. Two or more of them can drain the same cache concurrently, and if each one observes the same entry, erases it and then puts it, the single reference the cache holds on that entry is dropped more than once. The entry can then be freed while an ITE still maps it. xa_erase() is atomic and returns the previous entry, so put only the entry that this context actually removed. The cache reference is then dropped exactly once per entry even when the invalidations run concurrently, and the behavior is unchanged when only one context runs. | 19 Oct |
| CVE-2025-59886exploit | 8.8 high | 0.00% | eaton, xcomfort_ethernet_communication_interface | Improper input validation at one of the endpoints of Eaton xComfort ECI's web interface, could lead into an attacker with network access to the device executing privileged user commands. As cybersecurity standards continue to evolve and to meet our requirements today, Eaton has decided to discontinue the product. Upon retirement or end of support, there will be no new security updates, non-security updates, or paid assisted support options, or online technical content updates. | 19 Oct |
| CVE-2026-53360exploit | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use As per the GHCB spec, when using GHCB v2+ require the software scratch area to reside in the GHCB's shared buffer. Note, things like Page State Change (PSC) requests _rely_ on this behavior, as the guest can't provide a length when making the request, i.e. the size of the guest payload is bounded by the size of the shared buffer. Failure to force usage of the GHCB, and a slew of other flaws, lets a malicious SNP guest corrupt host kernel heap memory, and leak host heap layout information. setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2), where exit_info_2 is guest-controlled. With exit_info_2=24, this yields a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only entries[0] and entries[1] are in-bounds. snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253) but NOT against the actual buffer size: idx_end = hdr->end_entry; if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer snp_complete_psc(svm, ...); return 1; } for (idx = idx_start; idx <= idx_end; idx++) { entry_start = entries[idx]; // OOB when idx >= 2 The guest sets end_entry=10+, causing the host to iterate entries[2+] which are OOB into adjacent slab objects. For each OOB entry: - The host reads 8 bytes (OOB READ / info leak oracle) - If the data passes PSC validation, __snp_complete_one_psc() writes cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806) - If validation fails, the error response reveals whether adjacent memory is zero vs non-zero (information disclosure to guest) The guest controls allocation size (exit_info_2), entry range (cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly hit different slab positions. By exploiting the variety of bugs, a malicious SEV-SNP guest can: - OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure) - OOB write cur_page bits into adjacent objects (heap corruption) - Trigger use-after-free conditions across VMGEXITs E.g. with KASAN enabled, a single insmod of the PoC guest module produces 73 KASAN reports: BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890 Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199 BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890 Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199 The buggy address belongs to the object at ffff888XXXXXXXXX which belongs to the cache kmalloc-cg-32 of size 32 The buggy address is located N bytes to the right of allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX) Breakdown: 62 slab-out-of-bounds (reads + writes past allocation) 7 slab-use-after-free 4 use-after-free All credit to Stan for the wonderful description and reproducer! [sean: write changelog] | 19 Oct |
50 of 95 · Next
Download these 95 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.