Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-45321KEVexploit ×12 | 9.6 critical | 3.0% | tanstack, mistral, tanstack\/arktype-adapter, tanstack\/eslint-plugin-router, tanstack\/eslint-plugin-start | On 2026-05-11, between approximately 19:20 and 19:26 UTC, 84 malicious versions across 42 @tanstack/* packages were published to the npm registry. The publishes were authenticated via the legitimate GitHub Actions OIDC trusted-publisher binding for TanStack/router, but the publish workflow itself was not modified. The attacker chained three known vulnerability classes — a pull_request_target "Pwn Request" misconfiguration, GitHub Actions cache poisoning across the fork↔base trust boundary, and runtime memory extraction of the OIDC token from the Actions runner process — to publish credential-stealing malware under a trusted identity. Each affected package received exactly two malicious versions, published a few minutes apart. | Mon 26 Oct |
| CVE-2026-48204exploit | 9.8 critical | 1.0% | apache, camel | Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component. The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer. | 25 Oct |
| CVE-2026-71300exploit | 9.8 critical | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel Atmosphere Websocket component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first. | 12 Oct |
| CVE-2026-78329exploit | 9.8 critical | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel Undertow component. This issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. UndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(“websocket.*”). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself. | 12 Oct |
| CVE-2026-48203exploit | 9.1 critical | 1.0% | apache, camel | Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component. The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route. | 25 Oct |
| CVE-2026-48205exploit | 9.1 critical | 1.0% | apache, camel | Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route. | 25 Oct |
| CVE-2026-66906exploit | 9.1 critical | 1.0% | apache, camel | Relative path traversal vulnerability in Apache Camel Azure Storage Blob component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them. | 12 Oct |
| CVE-2025-66390exploit | 9.8 critical | 0.00% | no CPE yet | In Microsoft Azure API Management through 2025-10-17, when self-service signup (username/password Basic Authentication) is enabled in Tenant A, an attacker can reuse the registration flow by changing the hostname or tenant identifier to Tenant B, even when Tenant B has signup disabled at the UI level. In other words, disabling signup in the UI does not disable the underlying API endpoint (which still accepts cross-tenant requests based on the Host header). NOTE: The supplier states that they evaluated the report and determined it did not cross a security boundary (i.e., the observed behavior was a configuration/state issue rather than an exploitable product vulnerability affecting tenant isolation). NOTE: The supplier evaluated this report and determined that it did not cross a security boundary (i.e., the observed behavior was a configuration/state issue rather than an exploitable product vulnerability affecting tenant isolation). | 12 Oct |
| CVE-2026-53976 | 9.3 critical | 3.0% | no CPE yet | OpenChamber 1.11.7 contains a path traversal vulnerability in the file-serving endpoints /api/fs/read, /api/fs/stat, and /api/fs/raw that allows unauthenticated remote attackers to read arbitrary files by supplying the allowOutsideWorkspace=true query parameter alongside an absolute path, bypassing the workspace boundary check in resolveReadPathFromContext. Attackers can exploit the vacuous isPathWithinRoot guard to read sensitive files such as the JWT signing secret, SSH private keys, API credentials, and environment variables, enabling full authentication bypass by forging session cookies on password-protected deployments. | 24 Oct |
| CVE-2026-47210 | 9.8 critical | 2.0% | no CPE yet | vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, a sandbox escape vulnerability in vm2 allows arbitrary code execution in the host process when untrusted code is executed with async support on runtimes exposing WebAssembly JSPI (WebAssembly.promising / WebAssembly.Suspending). In the tested configuration, a JSPI-backed Promise can reach Promise.prototype.finally() in a way that bypasses the expected Promise-species hardening and exposes a host-originated rejection object to attacker-controlled species logic, breaking the sandbox boundary. This issue has been patched in version 3.11.4. | Mon 26 Oct |
| CVE-2026-33264 | 9.8 critical | 2.0% | apache, airflow | A bug in `BaseSerialization.deserialize()` allowed unrestricted `import_string()` of attacker-controlled class paths when the Scheduler / API Server loaded a serialized DAG: a DAG author could embed a malicious trigger into a DAG to gain remote code execution on the API Server / Scheduler process, crossing the Airflow security boundary that DAG-author code must never execute in those processes. Users are advised to upgrade to `apache-airflow` 3.3.0 or later. As a defense-in-depth mitigation, deployments where DAG-author trust is limited can restrict the `[core] allowed_deserialization_classes` config to a narrow allowlist. | 25 Oct |
| CVE-2026-40887 | 9.1 critical | 2.0% | no CPE yet | Vendure is an open-source headless commerce platform. Starting in version 1.7.4 and prior to versions 2.3.4, 3.5.7, and 3.6.2, an unauthenticated SQL injection vulnerability exists in the Vendure Shop API. A user-controlled query string parameter is interpolated directly into a raw SQL expression without parameterization or validation, allowing an attacker to execute arbitrary SQL against the database. This affects all supported database backends (PostgreSQL, MySQL/MariaDB, SQLite). The Admin API is also affected, though exploitation there requires authentication. Versions 2.3.4, 3.5.7, and 3.6.2 contain a patch. For those who are unable to upgrade immediately, Vendure has made a hotfix available that uses `RequestContextService.getLanguageCode` to validate the `languageCode` input at the boundary. This blocks injection payloads before they can reach any query. The hotfix replaces the existing `getLanguageCode` method in `packages/core/src/service/helpers/request-context/request-context.service.ts`. Invalid values are silently dropped and the channel's default language is used instead. The patched versions additionally convert the vulnerable SQL interpolation to a parameterized query as defense in depth. | Mon 26 Oct |
| CVE-2026-65974 | 9.9 critical | 1.0% | no CPE yet | ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.111.0 and 16.22.0, limited authenticated users can cross a permission boundary in Frappe safe execution because frappe.render_template is exposed without forcing restrict_globals, allowing server-side template injection and remote code execution. This issue is fixed in versions 15.111.0 and 16.22.0. | 23 Oct |
| CVE-2026-42854 | 9.8 critical | 1.0% | espressif, arduino-esp32 | arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. Prior to 3.3.8, the WebServer multipart form parser in arduino-esp32 allocates a Variable Length Array (VLA) on the stack whose size is derived from an attacker-controlled HTTP header field (Content-Type: multipart/form-data; boundary=...) without enforcing any length limit. Sending a boundary string longer than ~8000 characters overflows the 8192-byte task stack of the loopTask, causing a crash and potential remote code execution. This vulnerability is fixed in 3.3.8. | Mon 26 Oct |
| CVE-2026-16350 | 9.8 critical | 1.0% | mozilla, firefox, thunderbird | Incorrect boundary conditions in the Audio/Video: cubeb component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | 24 Oct |
| CVE-2026-16357 | 9.8 critical | 1.0% | mozilla, firefox, thunderbird | Incorrect boundary conditions in the Graphics component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | 24 Oct |
| CVE-2026-16368 | 9.8 critical | 1.0% | mozilla, firefox, thunderbird | Incorrect boundary conditions in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | 24 Oct |
| CVE-2026-16389 | 9.8 critical | 1.0% | mozilla, firefox, thunderbird | Incorrect boundary conditions, integer overflow in the Libraries component in NSS. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | 24 Oct |
| CVE-2026-71289 | 9.8 critical | 1.0% | no CPE yet | The NASA-AMMOS Asynchronous Network Management System (ANMS) reference implementation's default docker-compose.yml publishes the amp-manager service's REST API directly to the host network interface (port 8089, e.g. ":8089/tcp") with cap_add: NET_ADMIN, NET_RAW, SYS_NICE, bypassing the CAM (Configuration and Access Manager) gateway that is otherwise the system's sole authentication boundary. | 23 Oct |
| CVE-2026-74752 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate cookie AUTH state before use When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids. | 21 Oct |
| CVE-2026-89689 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: don't free session slots that are still in use nfsd4_sequence() can free the very slot it is currently processing. When the session shrinker has reduced se_target_maxslots below se_fchannel.maxreqs, the shrink path checks three conditions before calling free_session_slots(): 1. se_target_maxslots < maxreqs (shrink was advertised) 2. slot->sl_generation == se_slot_gen (slot is up-to-date) 3. seq->maxslots <= se_target_maxslots (client acknowledges) However, seq->slotid is never checked against se_target_maxslots. A client using a slot in the range [se_target_maxslots, maxreqs) can satisfy all three conditions: its slot has the current generation (set by a prior SEQUENCE), and it sends sa_highest_slotid <= se_target_maxslots to acknowledge the reduction. free_session_slots() then kfrees every slot at index >= se_target_maxslots, including the caller's own slot. The function continues to write sl_seqid, sl_flags, sl_generation, and stores the dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry() copies up to maxresp_cached bytes of the compound reply into the freed sl_data[] array, corrupting whatever slab object now occupies that address. Additionally, a concurrent thread processing SEQUENCE on a different high-numbered slot can have its slot freed out from under it. NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is released, so any concurrent thread past SEQUENCE will have its slot marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE before freeing. Fix both problems by: 1. Checking that the current request's slotid is below the shrink boundary. 2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and deferring the shrink if any are active. | 19 Oct |
| CVE-2026-89611 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: validate non-resident attribute offsets ntfs_attr_update_meta() shifts the attribute name when converting between non-sparse and sparse attributes. Converting to sparse also adds the compressed_size field before the name and mapping pairs, requiring eight additional bytes in the attribute record. However, the validator does not check that name_offset is within safe boundaries for these operations or that the additional space is available. A malicious MFT record could set name_offset such that: 1. The name is positioned at the very end of a non-sparse attribute. Converting to sparse would shift the name forward by 8 bytes, writing beyond the attribute boundary. 2. The name overlaps with the mapping pairs, causing corruption during conversion. Add validation to ensure: - For named attributes, name_offset is within valid bounds - Name does not extend beyond the attribute or overlap with mapping pairs - For non-sparse, non-compressed attributes, eight bytes are available after mapping_pairs_offset for the compressed_size field The space check also covers unnamed attributes, for which name_offset = 0 is valid and no name range needs to be checked. | 19 Oct |
| CVE-2026-89610 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: verify run length exceeding volume boundary The mapping pairs decoder validates that the starting LCN is within the volume but does not check if the run extends beyond the volume boundary. A malformed NTFS image with a crafted mapping pairs array could cause the kernel to access memory beyond the volume boundary, potentially leading to memory corruption and privilege escalation. Add validation to ensure lcn + length stays within nr_clusters. | 19 Oct |
| CVE-2026-89533 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix offset arithmetic in read_chunk_range svc_rdma_read_chunk_range() walks a Read chunk's segment list to build a sub-range starting at byte offset and spanning length bytes for a Position-Zero or Call chunk. Two arithmetic defects in the per-segment loop produce wrong DMA lengths and a u32 underflow: pcl_for_each_segment(segment, chunk) { if (offset > segment->rs_length) { offset -= segment->rs_length; continue; } dummy.rs_handle = segment->rs_handle; dummy.rs_length = min_t(u32, length, segment->rs_length) - offset; dummy.rs_offset = segment->rs_offset + offset; First, the skip predicate uses '>' instead of '>='. When offset equals the segment's full rs_length, the segment is fully consumed and should be skipped, but the loop falls through into the body. The resulting dummy.rs_length is min_t(u32, length, rs_length) - rs_length, which underflows to a near-UINT_MAX u32 when length is smaller than rs_length, or is zero otherwise. Second, the length formula subtracts offset from the min_t() result rather than from segment->rs_length before the cap. For offset > 0 the segment's residual is rs_length - offset, not rs_length, so the cap must be applied to the residual. With the current bracketing, whenever length is smaller than rs_length - offset the per-segment length becomes length - offset instead of length, silently dropping offset bytes from the rebuilt chunk. Combined with the boundary case above it also enables the u32 underflow path, which propagates a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB kmalloc_array_node() in svc_rdma_get_rw_ctxt(). Additionally, svc_rdma_read_call_chunk() can invoke this function with length == 0 when the last Read chunk ends exactly at the end of the Call chunk. With the corrected >= predicate, every segment is skipped and the function returns the initial -EINVAL, rejecting a valid request. Return success immediately when length is zero. Also break out of the loop once length is fully consumed to avoid passing zero-length segments to svc_rdma_build_read_segment(). Fix by using '>=' so a fully-consumed segment is skipped, by moving '- offset' inside min_t() so the cap is applied to the segment's residual length, by returning success for zero-length requests, and by stopping iteration when the requested range has been consumed. | 19 Oct |
| CVE-2026-80561 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: fix multiple unsafe decodes in decode_locker() decode_locker() in cls_lock_client.c contains three unsafe decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_copy() at the locker_id_t name field has no preceding bounds check. With p == end after ceph_start_decoding() accepts struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past the validated buffer boundary. 2. *p += sizeof(struct ceph_timespec) after the locker_info_t header is an unchecked pointer advance. A malicious OSD can position p past end, causing all subsequent _safe checks to pass against a bogus boundary. 3. len = ceph_decode_32(p) has no preceding bounds check, and the immediately following *p += len is uncapped. A malicious OSD can send len=0xffffffff, advancing p gigabytes past end and escaping the decode window entirely. Fix all three by replacing bare operations with their safe variants: ceph_decode_copy -> ceph_decode_copy_safe *p += sizeof(...) -> ceph_decode_skip_n ceph_decode_32(p) -> ceph_decode_32_safe *p += len -> ceph_decode_skip_n A new label is added to return -EINVAL on any bounds violation. -EINVAL is appropriate here: the data received from the OSD is structurally malformed, which is an invalid argument to the decode contract regardless of whether the caller or the wire is at fault. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition) without any further privileges beyond OSD session establishment. [ idryomov: use ceph_decode_skip_string() to skip description, trim changelog ] | 16 Oct |
| CVE-2026-80557 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: fix OOB read in decode_watchers() via missing bounds check ceph_start_decoding() validates that struct_len bytes remain in the buffer after the encoding header, but accepts struct_len=0 as valid: ceph_decode_need(p, end, 0, bad) always passes. When a malicious or compromised OSD sends an obj_list_watch_response_t reply with struct_len=0, ceph_start_decoding() returns success with p == end, leaving zero bytes guaranteed for subsequent reads. The immediately following ceph_decode_32(p) in decode_watchers() has no preceding bounds check. With p == end this is a 4-byte read past the validated buffer boundary. The garbage value is then passed directly to kzalloc_objs() as the watcher count. The sibling function decode_watcher() already uses the safe variants (ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32) after its own ceph_start_decoding() call. decode_watchers() is the only site that uses the bare variant, confirming an oversight. Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end, *num_watchers, bad), consistent with the established pattern. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment (e.g. cloud) can trigger this against any kernel client that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges beyond OSD session establishment. [ idryomov: trim changelog ] | 16 Oct |
| CVE-2026-72129 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | 16 Oct |
| CVE-2025-68284 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds writes in handle_auth_session_key() The len field originates from untrusted network packets. Boundary checks have been added to prevent potential out-of-bounds writes when decrypting the connection secret or processing service tickets. [ idryomov: changelog ] | 15 Oct |
| CVE-2026-45311 | 9.6 critical | 1.0% | no CPE yet | CodeWhale is a DeepSeek + MiMo coding agent in terminal. From 0.3.0 to 0.8.23, the run_tests tool executes cargo test in the workspace with ApprovalRequirement::Auto, meaning it runs without any user approval prompt. cargo test compiles and executes arbitrary code: test binaries, build.rs build scripts, and proc macros. While auto-approving test execution is a deliberate design choice, it creates an inconsistency in the security boundary. However, in a malicious repository, test code can execute arbitrary shell commands, exfiltrate credentials, or establish persistence with zero approval. The attack is amplified by AGENTS.md (auto-loaded into the system prompt), which can instruct the model to run tests proactively at session start. This vulnerability is fixed in 0.8.23. | Mon 26 Oct |
| CVE-2026-70470 | 9.5 critical | 1.0% | flowiseai, flowise | Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, Flowise validatePythonCodeForDataFrame in packages/components/src/pythonCodeValidator.ts can be bypassed with Unicode homoglyph identifiers, allowing arbitrary Python execution inside Pyodide and full OS command execution on the Flowise host via Pyodide js module interop. The validator gates pyodide.runPythonAsync in packages/components/nodes/agents/CSVAgent/CSVAgent.ts and packages/components/nodes/agents/AirtableAgent/AirtableAgent.ts with an ASCII word-boundary blacklist. JavaScript regex word boundaries are ASCII-only, while Python 3 NFKC-normalizes identifiers at parse time, so homoglyph forms such as __cl𝐚ss__, __subcl𝐚sses__, __b𝐚se__, and __b𝐮iltins__ bypass the blacklist and are parsed as their ASCII equivalents. This issue is fixed in version 3.1.3. | 24 Oct |
| CVE-2026-40076 | 9.4 critical | 1.0% | openmrs | OpenMRS Core is an open source electronic medical record system platform. In versions 2.7.8 and earlier and versions 2.8.0 through 2.8.5, the module upload endpoint at POST `/openmrs/ws/rest/v1/module` is vulnerable to a Zip Slip path traversal attack. During automatic extraction of uploaded .omod archives in `WebModuleUtil.startModule()`, ZIP entries under web/module/ are checked only to see whether the full entry path starts with `..,` and the remaining path is then concatenated into the destination path without normalization or a boundary check. A crafted archive can therefore include entries such as `web/module/../../../../malicious.jsp` and cause files to be written outside the intended module directory. An authenticated attacker with module upload access can write arbitrary files to locations such as the web application root and achieve remote code execution by uploading a JSP file and then requesting it. The issue is compounded by the fact that the module.allow_web_admin runtime property is enforced in the legacy UI controller but not in the REST API upload path, so deployments relying on that property to block web-based module administration remain exposed through the REST endpoint. This issue has been fixed in versions after 2.7.8 in the 2.7.x line and in version 2.8.6 and later. | Mon 26 Oct |
| CVE-2026-73483 | 9.4 critical | 1.0% | flowiseai, flowise | Flowise (packages flowise and flowise-components) in versions <= 3.1.2 contain a sandbox escape in the vm2/@flowiseai/nodevm JavaScript sandbox. An authenticated user with access to the /api/v1/node-custom-function endpoint can escape the sandbox by supplying attacker-controlled executablePath and args parameters to puppeteer.launch(), which internally invokes child_process.spawn() outside the sandbox boundary. This allows execution of arbitrary OS commands as the Flowise process user (root in the official Docker image) and arbitrary host file disclosure via Chromium's file:// URL handling. In versions 3.0.8–3.1.2 exploitation requires ALLOW_BUILTIN_DEP=true; earlier versions are exploitable by default. Fixed in 3.1.3. | 24 Oct |
| CVE-2026-58370 | 9.2 critical | 1.0% | no CPE yet | Woodpecker before 3.15.0 matches the ApprovalAllowedUsers bypass list against pipeline.Author. For the GitLab forge driver, pipeline.Author is populated from the git commit author name (commit.author.name) carried in the webhook payload, which is attacker-controlled and not verified by GitLab. A user who can open a merge request from a fork can set the commit author name to match an entry in ApprovalAllowedUsers, causing needsApproval to return false so the pipeline runs without the required approval. This defeats the fork-approval security boundary and allows execution of attacker-controlled pipeline steps on a Woodpecker agent and exfiltration of CI secrets exposed to the run. Other built-in forge drivers (Gitea, Forgejo, GitHub, Bitbucket) derive pipeline.Author from the forge-validated sender/actor identity and are not affected. | 25 Oct |
| CVE-2026-16393 | 9.1 critical | 1.0% | mozilla, firefox, thunderbird | Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | 24 Oct |
| CVE-2026-98549 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition. | 24 Oct |
| CVE-2026-93228 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list. | 21 Oct |
| CVE-2026-73257 | 9.1 critical | 1.0% | cesanta, mongoose | Mongoose is an embedded web server and network library. Priro to version 7.22, a remote unauthenticated attacker can send an HTTP request containing both Content-Length and Transfer-Encoding: chunked. The cl_count and te_count checks in the mg_http_parse() and http_cb() paths in src/http.c accept both headers and prioritize chunked encoding, while a Content-Length-preferring reverse proxy can use a different request boundary. This CL.TE desynchronization can inject requests that access or modify resources in another user context. This issue is fixed in version 7.22. | 18 Oct |
| CVE-2026-81212 | 10.0 critical | 0.00% | no CPE yet | IBM DataStage on Cloud Pak for Data 5.4.0.0 allows an unauthenticated user to perform an arbitrary write into shared Redis under any tenant's key. This collapses the platform's credential-encryption boundary and lets an anonymous caller poison any tenant's cached flow parameters. | Wed 28 Oct |
| CVE-2026-44327 | 10.0 critical | 0.00% | free5gc | free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF mounts the nnef-oam route group without inbound OAuth2/bearer-token authorization. A network attacker who can reach NEF on the SBI can hit the OAM route with no Authorization header at all and the handler returns 200 OK. The current OAM handler is a stub that returns null, but the structural defect is route-group-scoped: the entire OAM route group has no inbound auth middleware, so every future OAM operation added to this group inherits the missing auth boundary by default. This vulnerability is fixed in 4.2.2. | 14 Oct |
| CVE-2026-8091 | 9.8 critical | 0.00% | mozilla, firefox, thunderbird | Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150, Thunderbird 150, Firefox ESR 140.10.1, Thunderbird 140.10.1, and Firefox ESR 115.35.2. | 26 Oct |
| CVE-2026-41157 | 9.8 critical | 0.00% | no CPE yet | A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger an out-of-bound write in the GPU user-space driver, leading to memory corruption and possible browser/GPU process crash. The software computes a required memory size from untrusted input, but integer overflow can produce a value smaller than needed. Subsequent write operations may then occur past the intended memory boundary, corrupting adjacent memory and causing process instability or termination. | 25 Oct |
| CVE-2026-46325 | 9.8 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE The current implementation incorrectly handles memory regions (MRs) with page sizes different from the system PAGE_SIZE. The core issue is that rxe_set_page() is called with mr->page_size step increments, but the page_list stores individual struct page pointers, each representing PAGE_SIZE of memory. ib_sg_to_page() has ensured that when i>=1 either a) SG[i-1].dma_end and SG[i].dma_addr are contiguous or b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned. This leads to incorrect iova-to-va conversion in scenarios: 1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K): ibmr->iova = 0x181800 sg[0]: dma_addr=0x181800, len=0x800 sg[1]: dma_addr=0x173000, len=0x1000 Access iova = 0x181800 + 0x810 = 0x182010 Expected VA: 0x173010 (second SG, offset 0x10) Before fix: - index = (0x182010 >> 12) - (0x181800 >> 12) = 1 - page_offset = 0x182010 & 0xFFF = 0x10 - xarray[1] stores system page base 0x170000 - Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong) 2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K): ibmr->iova = 0x18f800 sg[0]: dma_addr=0x18f800, len=0x800 sg[1]: dma_addr=0x170000, len=0x1000 Access iova = 0x18f800 + 0x810 = 0x190010 Expected VA: 0x170010 (second SG, offset 0x10) Before fix: - index = (0x190010 >> 16) - (0x18f800 >> 16) = 1 - page_offset = 0x190010 & 0xFFFF = 0x10 - xarray[1] stores system page for dma_addr 0x170000 - Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong) Yi Zhang reported a kernel panic[1] years ago related to this defect. Solution: 1. Replace xarray with pre-allocated rxe_mr_page array for sequential indexing (all MR page indices are contiguous) 2. Each rxe_mr_page stores both struct page* and offset within the system page 3. Handle MR page_size != PAGE_SIZE relationships: - page_size > PAGE_SIZE: Split MR pages into multiple system pages - page_size <= PAGE_SIZE: Store offset within system page 4. Add boundary checks and compatibility validation This ensures correct iova-to-va conversion regardless of MR page size and system PAGE_SIZE relationship, while improving performance through array-based sequential access. Tests on 4K and 64K PAGE_SIZE hosts: - rdma-core/pytests $ ./build/bin/run_tests.py --dev eth0_rxe - blktest: $ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd [1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ | 21 Oct |
| CVE-2026-74723 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | 21 Oct |
| CVE-2026-64232 | 9.8 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting. | 19 Oct |
| CVE-2026-68082 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] | 19 Oct |
| CVE-2026-89550 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: svcauth_gss: enforce krb5 token minimum length svcauth_gss_unwrap_priv() validates only an upper bound on the wire-supplied opaque length before handing the buffer to gss_unwrap(): if (len > xdr_stream_remaining(xdr)) goto unwrap_failed; offset = xdr_stream_pos(xdr); ... maj_stat = gss_unwrap(ctx, offset, offset + len, buf); The wire value `len` flows unchanged as the upper bound into the krb5 unwrap path, so a len in [0, 16] passes this check and is handed to gss_unwrap(). For a krb5 v2 context that lands in gss_krb5_unwrap_v2(), which reads the 16-byte RFC 4121 token header fields at ptr+4 and ptr+6 and then calls rotate_left() before any integrity check. With a sub-header length the header reads run past the token, and _rotate_left()'s `shift %= buf->len` path can divide by zero when buf->len has been driven to zero by the truncated token. A header-only token (len == 16) is equally invalid: with a non-zero RRC field and the opaque blob ending at the XDR buffer boundary, rotate_left() builds a zero-length subbuffer, reaching the same division. Reject the token at the server entry point before it reaches the krb5 unwrap core. A valid sealed RFC 4121 token must contain the 16-byte header plus at least some encrypted payload. Fix by adding a minimum-length check immediately after the existing upper-bound check: if (len <= GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; | 19 Oct |
| CVE-2025-13021 | 9.8 critical | 0.00% | mozilla, firefox | Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 145 and Thunderbird 145. | 18 Oct |
| CVE-2025-13022 | 9.8 critical | 0.00% | mozilla, firefox | Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 145 and Thunderbird 145. | 18 Oct |
| CVE-2025-13023 | 9.8 critical | 0.00% | mozilla, firefox | Sandbox escape due to incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 145 and Thunderbird 145. | 18 Oct |
| CVE-2025-13026 | 9.8 critical | 0.00% | mozilla, firefox | Sandbox escape due to incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 145 and Thunderbird 145. | 18 Oct |
50 of 70 · Next
Download these 70 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.