Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-39682KEVexploit ×2 | 9.8 critical | 3.0% | linux, debian, linux_kernel, debian_linux, simatic_cn_4100_firmware | In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | 19 Oct |
| CVE-2026-94169exploit | 10.0 critical | 4.0% | no CPE yet | Improper Control of Generation of Code ('Code Injection') vulnerability in Theme-one The Grid the-grid allows Command Injection.This issue affects The Grid: from n/a through 2.8.1. | 16 Oct |
| CVE-2026-49468exploit ×2 | 9.5 critical | 3.0% | litellm | LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.84.0, a Host-header parsing flaw in the LiteLLM proxy could, under specific conditions, allow unauthenticated access to protected management routes. The auth layer derived the effective route from request.url.path in litellm/proxy/auth/auth_utils.py::get_request_route(), which Starlette reconstructs from the Host header. A crafted Host could therefore make the auth gate evaluate a different route from the one FastAPI dispatched. This vulnerability is fixed in 1.84.0. | 25 Oct |
| CVE-2026-53595exploit | 9.4 critical | 2.0% | no CPE yet | FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the public endpoint `POST /user-setup/{hash}/{invite_sent_at}` (`OpenController@userSetupSave`) selects the target account solely by its `invite_hash` column, then overwrites that account's email and password and logs in as it. No authentication, cookie, or prior session is required. After a user activates, FreeScout sets `invite_hash` to the empty string. On MySQL and MariaDB, `VARCHAR` equality ignores trailing spaces, so a single URL-encoded space (`%20`) matches the stored empty string and selects the lowest-id activated user. The expiry guard decrypts `invite_sent_at` with the target's password hash, but `Helper::decrypt` returns its raw input unchanged when decryption fails. A plaintext numeric value such as `9999999999` therefore passes the time-to-live check without any secret. The result is that an anonymous attacker sets the email and password of the lowest-id activated FreeScout account (a support agent, or an administrator if one was added by invitation) and authenticates as that account. Version 1.8.224 contains a fix. | 24 Oct |
| CVE-2026-42779exploit | 9.8 critical | 1.0% | apache, mina | The fix for CVE-2026-41635 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade. | Mon 26 Oct |
| CVE-2026-62183exploit | 9.8 critical | 1.0% | apache, syncope | Improper Privilege Management vulnerability in Apache Syncope. When: * the all-Java user workflow adapter is configured, or * the Flowable user workflow adapter is configured, bearing a BPMN definition not requiring admin approval for user self registration of self update requests the following scenario could happen. A REST API call can allow the user to grant themselves one or more of defined Roles, thus gaining their Entitlements and becoming in fact an administrator; the actual Entitlements gained depend on the Roles that are effectively defined on the specific Syncope deployment. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue. | 24 Oct |
| CVE-2026-59243exploit ×2 | 9.8 critical | 1.0% | apache, apache-airflow-providers-fab | The FAB auth manager's Azure AD OAuth login defaulted `verify_signature=False` when decoding the ID token, so an attacker able to present a forged or unsigned (`alg:none`) ID token to the OAuth callback could bypass authentication and log in as an arbitrary user, including one holding the Admin role (CWE-347). Deployments running the FAB auth manager with the Azure AD OAuth login path under its default configuration are affected; the Authentik path already defaulted to `True`. This issue affects `apache-airflow-providers-fab` before 3.7.3. Users are advised to upgrade to `apache-airflow-providers-fab` 3.7.3, which defaults `verify_signature=True`. | 23 Oct |
| CVE-2026-89633exploit | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | 21 Oct |
| CVE-2026-52924exploit | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | 19 Oct |
| CVE-2026-43501exploit ×2 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | 19 Oct |
| CVE-2026-31402exploit ×2 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. | 19 Oct |
| CVE-2026-71300exploit | 9.8 critical | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel Atmosphere Websocket component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first. | 12 Oct |
| CVE-2026-78329exploit | 9.8 critical | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel Undertow component. This issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. UndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(“websocket.*”). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself. | 12 Oct |
| CVE-2026-17566exploit | 9.4 critical | 1.0% | pgadmin, pgadmin_4 | pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor). The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing. This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18. | 23 Oct |
| CVE-2026-66906exploit | 9.1 critical | 1.0% | apache, camel | Relative path traversal vulnerability in Apache Camel Azure Storage Blob component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them. | 12 Oct |
| CVE-2026-114612exploit | 9.9 critical | 0.00% | no CPE yet | LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From 1.87.0 until 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2, the proxy reuses one cryptographic context for at-rest secrets and session tokens, allowing an authenticated internal user to have crafted metadata containing a forged administrator credential encrypted and returned by the API-key flow. Replaying that ciphertext as a bearer token causes the proxy to trust the forged proxy administrator identity, permitting administrative access and arbitrary commands through the MCP stdio endpoint. Versions 1.87.0 through 1.90.x require EXPERIMENTAL_UI_LOGIN to be enabled, while versions after 1.91.0 are exploitable in the default configuration. This issue was fixed in LiteLLM 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2. | Fri 30 Oct |
| CVE-2026-52782exploit | 9.9 critical | 0.00% | no CPE yet | OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, there is an IDOR through /projects/<A>/settings/project_storages/<A_ps_id> via PATCH parameter "storages_project_storage[project_folder_id]" leads to Access to Unauthorized Resources. A project-admin in one project can hijack the managed Nextcloud or OneDrive folder of another project on the same storage by writing the victim project's project_folder_id into the attacker's Storages::ProjectStorage row. The next managed-folder sync overwrites the ACL on the referenced folder with the attacker project's user list. This vulnerability is fixed in 17.3.3 and 17.4.1. | 25 Oct |
| CVE-2026-98432exploit ×35news ×4 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch. | 24 Oct |
| CVE-2026-52993exploit | 9.8 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations. | 19 Oct |
| CVE-2026-59891exploit | 9.6 critical | 0.00% | no CPE yet | sigstore-js provides JavaScript libraries for interacting with Sigstore services. Prior to 0.7.1, getRegistryCredentials() reads credentials from the Docker config file and selects an entry by checking whether any configured auth key contains the target registry string. Because this is a substring match rather than an exact host match, credentials configured for one registry can be selected for and transmitted to a different registry whose hostname has a substring relationship with a configured auth key. This issue is fixed in version 0.7.1. | 24 Oct |
| CVE-2026-17351exploit | 9.4 critical | 0.00% | pgadmin, pgadmin_4 | The fix for CVE-2026-12045 in pgAdmin 4 9.16 required the LLM-supplied query passed to the AI Assistant's execute_sql_query tool to parse, via sqlparse, as exactly one non-transaction-control statement before running it inside a BEGIN TRANSACTION READ ONLY wrapper. sqlparse's string-literal lexing can disagree with PostgreSQL's own parser: under standard_conforming_strings = on (PostgreSQL's default since 9.1), a backslash immediately before a quote is an ordinary character to PostgreSQL, but sqlparse treats it as escaping the quote. A payload such as SELECT '\';COMMIT;CREATE TABLE pwn(x int);SELECT 1 --' therefore parses as a single SELECT to sqlparse's validator, while PostgreSQL executes it as four statements: the smuggled COMMIT ends the wrapping read-only transaction, and the trailing ROLLBACK becomes a no-op. This reintroduces the same write/RCE bypass CVE-2026-12045 was meant to close, reachable via the same indirect prompt-injection delivery (an attacker plants the payload in any object the AI Assistant may read; the LLM emits it as a tool call). An initial candidate fix ran the query with psycopg's execute(..., prepare=True), intending to force PostgreSQL's own Parse step (extended query protocol) to reject multi-statement text regardless of sqlparse's classification. This candidate fix does not work as submitted: psycopg3's PrepareManager silently ignores the prepare argument whenever the connection's prepare_threshold is None, which is pgAdmin's default for every server connection (the per-server "Prepare threshold" field is blank unless an administrator explicitly sets it) -- psycopg3 falls back to the simple query protocol, the same multi-statement-capable path the bypass exploits, so the candidate fix closes nothing on any real-world default configuration. The corrected fix sets conn.prepare_threshold = 0 directly on the dedicated, single-use read-only connection the AI Assistant tool opens, structurally forcing the extended query protocol independent of any server-level configuration. Verified against a live PostgreSQL 18 instance: the payload executes successfully under the prepare_threshold=None (default) behavior, and is rejected with "cannot insert multiple commands into a prepared statement" once prepare_threshold=0 is set on that connection. This issue affects pgAdmin 4: from 9.13 before 9.17. | 23 Oct |
| CVE-2026-77812exploit | 9.4 critical | 0.00% | no CPE yet | DJI drones transmit DUML (DJI Universal Markup Language) protocol messages over BLE (Bluetooth Low Energy) without encryption. When a client attempts to connect to the drone over Wi-Fi, or when the drone is switched to QuickTransfer mode, the DJI Fly application exchanges DUML messages with the drone over BLE, including the Wi-Fi credentials. An attacker within BLE range can passively sniff this traffic and recover the credentials in cleartext, including the drone's Wi-Fi PSK, SSID, and trusted identifier UUID. Obtaining these credentials allows the attacker to join the drone's internal Wi-Fi network, interact with network services exposed by the drone, and decrypt Wi-Fi traffic exchanged between the drone and the legitimate user. * An attacker within BLE range recovers the Wi-Fi SSID and PSK in cleartext, and can then join the drone's network * The same capture also exposes the session UUID identifier, which is the only thing the drone uses to tell a trusted client from an unknown one, so the attacker can replay it and skip the physical confirmation of new connected devices. * The credentials do not change between sessions unless the operator manually resets the Wi-Fi settings, so one capture stays valid indefinitely * The attack is fully passive, with nothing transmitted and no connection made, so neither the operator nor the drone has any indication the session was observed * A BLE sniffer and presence during one normal DJI Fly connection are needed Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600. Remediation requires a firmware update from the vendor. There is no user-side mitigation that fully addresses the vulnerability without upgrading. | 15 Oct |
| CVE-2026-46316exploit | 9.3 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry vgic_its_invalidate_cache() walks the per-ITS translation cache with xa_for_each() and drops the cache's reference on each entry with vgic_put_irq(). It puts the iterated pointer, though, rather than the value returned by xa_erase(). The function is called from contexts that do not exclude one another: the ITS command handlers hold its_lock, the GITS_CTLR write path holds cmd_lock, and the path that clears EnableLPIs in a redistributor's GICR_CTLR holds neither. Two or more of them can drain the same cache concurrently, and if each one observes the same entry, erases it and then puts it, the single reference the cache holds on that entry is dropped more than once. The entry can then be freed while an ITE still maps it. xa_erase() is atomic and returns the previous entry, so put only the entry that this context actually removed. The cache reference is then dropped exactly once per entry even when the invalidations run concurrently, and the behavior is unchanged when only one context runs. | 19 Oct |
| CVE-2026-50627 | 9.1 critical | 5.0% | apache, cxf | The JwtAccessTokenValidator class in Apache CXF fails to validate the 'aud' (Audience) claims of incoming JWT access tokens. This allows a JWT issued for one Resource Server to be successfully replayed against a completely different Resource Server, leading to Token Confusion/Routing attacks. Users are recommended to upgrade to versions 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. | Mon 26 Oct |
| CVE-2021-46848 | 9.1 critical | 3.0% | gnu, fedoraproject, libtasn1, fedora, debian_linux | GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der. | 14 Oct |
| CVE-2024-52533 | 9.8 critical | 2.0% | gnome, debian, glib, debian_linux, active_iq_unified_manager | gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character. | 15 Oct |
| CVE-2026-42369 | 10.0 critical | 1.0% | no CPE yet | GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other security devices. It is a native application accessed locally, but it is also possible to enable remote access via the "WebCam Server" feature. Once enabled, it is possible to access to the management and monitoring feature via a regular Web interface. This webersever is another native application, compiled without ASLR, which makes exploitation much easier and more likely. Most of the features require authentication before being reachable and leverage a standard login page to grant access. However the `gvapi` endpoint uses its own authentication mechanism via an `HTTP Authorization` header. It supports both `Basic` authentication and the `Digest` modes of authentication. #### Stack-overflow via unbound copy of base64 decoded string The `b64decoder` string is sized dynamically, but it is then copied to the `Buffer` stack variable one character at the time at [0], and there's no bound-check. As such, if the decoded string is bigger than 256 characters (the size of the `Buffer` variable) then a stack overflow occurs. Because the data can be fully controlled by an attacker and lack of ASLR, this vulnerability can easily be exploited to gain full code execution as SYSTEM on the machine running the service. | Mon 26 Oct |
| CVE-2026-43997 | 10.0 critical | 1.0% | vm2_project, vm2 | vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.0, it is possible to obtain the host Object. There are various ways to use the host Object, to escape the sandbox, one example would be using HostObject.getOwnPropertySymbols to obtain Symbol(nodejs.util.inspect.custom). This vulnerability is fixed in 3.11.0. | Mon 26 Oct |
| CVE-2026-44182 | 10.0 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions prior to 3.3.0, the server interpolates untrusted environment variables (e.g., KERNEL_XXX) into Kubernetes manifests without YAML-aware escaping, enabling YAML injection attacks. Attackers can inject new fields, overwrite critical fields (e.g., duplicate securityContext keys, where the last one prevails), and inject document boundaries (--- for new documents, ... for end-of-document) to generate multiple resources, potentially creating arbitrary types, such as privileged pods. The Jinja2 template for the Kubernetes manifest contains several kernel_xxx variables, such as kernel_working_dir that are used when rendering the manifest and are all vectors for YAML injection. This issue has been fixed in version 3.3.0. | 24 Oct |
| CVE-2026-16326 | 10.0 critical | 1.0% | no CPE yet | In consul-mcp-server, versions 0.1.0 up to 0.1.3 did not properly isolate session state in stateless mode, which may allow one client's Consul authentication token to be used for subsequent requests from other clients. This vulnerability (CVE-2026-16326) is fixed in consul-mcp-server 0.1.4. | 24 Oct |
| CVE-2026-105944 | 10.0 critical | 1.0% | no CPE yet | Apache Pulsar Manager is a web console for administering Apache Pulsar clusters. It has its own user accounts and login, and it can be configured with an HTTP authentication credential, such as a token, that it uses to call the Pulsar admin API on behalf of its users. Pulsar Manager has the following security issues: - The operation for creating the initial administrator (superuser) account is available without authentication, and it remains available after the instance has been initialized. Anyone who can reach Pulsar Manager can create an additional administrator account at any time and log in with it. This issue affects versions 0.3.0 and later. - Requests to the Pulsar admin API that Pulsar Manager proxies to the configured Pulsar cluster are not subject to Pulsar Manager's authentication. Version 0.2.0 checks the caller's permissions for some of these requests, but not for all of them. An unauthenticated user can therefore use Pulsar Manager to send requests to the Pulsar admin API, which the cluster processes with the credential configured in Pulsar Manager. - The destination of a proxied request can be chosen by the requester, and Pulsar Manager attaches its configured Pulsar admin credential to the request. An unauthenticated user can make Pulsar Manager send this credential to a host of the user's choosing, and the credential can then be used directly against the Pulsar cluster. - In versions 0.3.0 and later, Pulsar Manager does not distinguish between privilege levels of its accounts. Every account, including one created through the first issue, effectively has full administrative privileges in Pulsar Manager. The impact depends on the version and the deployment. In versions 0.3.0 and later, any user who can reach Pulsar Manager over the network can take full control of Pulsar Manager. In all versions, when Pulsar Manager is configured with an HTTP authentication credential for a Pulsar cluster, any user who can reach Pulsar Manager can perform the Pulsar admin operations that this credential permits and can obtain the credential itself. When Pulsar Manager is configured with the token signing key of a Pulsar cluster, an administrator of Pulsar Manager can create tokens for the cluster. Apache Pulsar Manager is no longer maintained and is completely unsupported. The Apache Pulsar PMC has retired it. There are no supported versions, and no further releases, fixes or security updates will be made for any version. These issues will not be fixed. Using Pulsar Manager is not recommended. Users should stop using Pulsar Manager, remove existing deployments, and move to one of the alternatives described in the Administration UI documentation (https://pulsar.apache.org/docs/administration-ui). Users who have exposed Pulsar Manager configured with a Pulsar credential or token signing key should also consider replacing that credential or key. Until a deployment is removed, users should not expose Pulsar Manager to untrusted networks, and should restrict network access to it to trusted administrators. | 23 Oct |
| CVE-2026-74279 | 10.0 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: crypto: cavium/cpt - fix DMA cleanup using wrong loop index The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. | 16 Oct |
| CVE-2026-19656 | 9.9 critical | 1.0% | scada-lts | ScadaLTS 2.7.8.1 exposes a server-side method that lacks authorization checks, allowing any authenticated user (including one holding only low-privilege, read-only permissions) to execute arbitrary operating system commands on the host. Successful exploitation results in code execution in the context of the ScadaLTS server process (root), leading to full compromise of the underlying system. | 23 Oct |
| CVE-2026-85748 | 9.9 critical | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From 12.3.1 until 12.3.3 and 13.0.2, SYS_REFCURSOR handling is affected because cursor-array reallocation can leave stale references in routine contexts. A low-privileged attacker can open a large number of SYS_REFCURSORs and then fetch one to trigger a use-after-free that can enable remote code execution when combined with another vulnerability. This issue is fixed in versions 12.3.3 and 13.0.2. | 20 Oct |
| CVE-2025-68667 | 9.9 critical | 1.0% | no CPE yet | Conduit is a chat server powered by Matrix. A vulnerability that affects a number of Conduit-derived homeservers allows a remote, unauthenticated attacker to force the target server to cryptographically sign arbitrary membership events. Affected products include Conduit prior to version 0.10.10, continuwuity prior to version 0.5.0, Grapevine prior to commit `9a50c244`, and tuwunel prior to version 1.4.8. The flaw exists because the server fails to validate the origin of a signing request, provided the event's state_key is a valid user ID belonging to the target server. Attackers can forge "leave" events for any user on the target server. This forcibly removes users (including admins and bots) from rooms. This allows denial of service and/or the removal of technical protections for a room (including policy servers, if all users on the policy server are removed). Attackers can forge "invite" events from a victim user to themselves, provided they have an account on a server where there is an account that has the power level to send invites. This allows the attacker to join private or invite-only rooms accessible by the victim, exposing confidential conversation history and room state. Attackers can forge "ban" events from a victim user to any user below the victim user's power level, provided the victim has the power level to issue bans AND the target of the ban resides on the same server as the victim. This allows the attacker to ban anyone in a room who is on the same server as the vulnerable one, however cannot exploit this to ban users on other servers or the victim themself. Conduit fixes the issue in version 0.10.10. continuwuity fixes the issue in commits `7fa4fa98` and `b2bead67`, released in 0.5.0. tuwunel fixes the issue in commit `dc9314de1f8a6e040c5aa331fe52efbe62e6a2c3`, released in 1.4.8. Grapevine fixes the issue in commit `9a50c2448abba6e2b7d79c64243bb438b351616c`. As a workaround, block access to the `PUT /_matrix/federation/v2/invite/{roomId}/{eventId}` endpoint using your reverse proxy. | 19 Oct |
| CVE-2024-53177 | 9.8 critical | 1.0% | linux | In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) | Fri 30 Oct |
| CVE-2026-110879 | 9.8 critical | 1.0% | no CPE yet | jackson-databind validates the outer class of a class-name type ID but accepts attacker-selected classes inside its generic arguments, even when those classes violate the declared type or would be rejected as direct type IDs. This bypasses the generic-argument validation added for CVE-2026-54512 (GHSA-j3rv-43j4-c7qm), of which this is an incomplete fix. DatabindContext._resolveAndValidateGeneric() checks the outer class against the declared base type and then passes each argument from the type ID to _validateTypeParameter(), which validates the argument against the outer base type rather than enforcing its corresponding declared generic binding. It also invokes validators with arguments that have not passed the subtype check those validators expect. Under the default DefaultBaseTypeLimitingValidator this accepts an unrelated class inside a generic subtype even when the same class is rejected as a direct type ID. Where an allowIfBaseType(...) rule approves the outer type, Jackson substitutes LaissezFaireSubTypeValidator, so the configured validator no longer restricts the embedded arguments. The element type of a plain array type ID such as [Lpkg.Gadget; is likewise left unvalidated once the array's base type is approved. Affected paths include annotation-based class-name polymorphism with a default Jackson 3.x JsonMapper, configured default typing in both Jackson 2.x and 3.x, and integrations that expose that default typing. The default-validator case requires no application-authored validator: with @JsonTypeInfo(use = Id.CLASS), a direct gadget type ID is rejected as "Not a subtype", while a type ID naming a generic wrapper around the same gadget is accepted and deserialized, including attacker-supplied bean properties. Where class-name default typing permits Map, a property declared as Map<String,String> accepts HashMap<FileSystemXmlApplicationContext,String>; map-key discovery then passes the attacker-controlled JSON property name to the selected class's one-string constructor. With Spring on the classpath and attacker-controlled XML the application can load, that constructor loads the XML and invokes ProcessBuilder.start() under the application account, giving arbitrary command execution. This issue affects com.fasterxml.jackson.core:jackson-databind from 2.10.0 and tools.jackson.core:jackson-databind from 3.0.0. Releases before 2.10.0 are not affected, because PolymorphicTypeValidator was introduced in jackson-databind 2.10.0. | Wed 28 Oct |
| CVE-2026-58081 | 9.8 critical | 1.0% | freebsd | Several encoding modules, including HZ, UTF-7, VIQR, and ZW, did not properly check the size of the caller-supplied output buffer before writing converted characters. An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules. | Tue 27 Oct |
| CVE-2026-58082 | 9.8 critical | 1.0% | freebsd | The ISO-2022 encoding module used a stack buffer sized to MB_LEN_MAX (6 bytes) for intermediate character output. Some ISO-2022 variants can require up to 10 bytes per character, in which case conversions can trigger a stack buffer overflow of up to four bytes. An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules. | Tue 27 Oct |
| CVE-2026-41635 | 9.8 critical | 1.0% | apache, mina | Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade. | Mon 26 Oct |
| CVE-2026-63888 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. | Mon 26 Oct |
| CVE-2026-9711 | 9.8 critical | 1.0% | no CPE yet | The EventON - WordPress Virtual Event Calendar Plugin plugin for WordPress (full) is vulnerable to SQL Injection via the WordPress 'search' parameter in versions up to, and including, 5.0.11 due to insufficient escaping on the user supplied parameter and lack of preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database, granted the "Enable additional search queries" setting is enabled and at least one published event exists. | 25 Oct |
| CVE-2026-44180 | 9.8 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. Versions 2.0.0rc1 and above prior to 3.3.0 have a prohibited UID and GID feature that by default prevents launching kernels with UID or GID 0 (root), and this restriction can be bypassed using a specially crafted KERNEL_UID or KERNEL_GID value. This input validation vulnerability allows running Jupyter kernels as root, which can be dangerous as it allows more attack surface, and may lead to container escapes, compromising the worker node and all workloads running on it. Repeated exploitation can compromise all worker nodes, and thus the entire Kubernetes cluster. It is possible to specify volume mounts, so one vector for a container escape is to use a hostPath R/W volume mount, use this UID/GID bypass to run as root, and then gain code execution in the underlying worker node by creating a crontab entry in the mounted host file system. This issue has been fixed in version 3.0.0. | 24 Oct |
| CVE-2026-15982 | 9.8 critical | 1.0% | no CPE yet | The Aimogen Pro - All-in-One AI Content Writer, Editor, ChatBot & Automation Toolkit plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.8.4. This is due to due to a missing capability check on the 'aiomatic_call_google_ai_function' function. This makes it possible for unauthenticated attackers to leverage the 'aimogen_wp_god_mode' tool to clear function blacklists and execute arbitrary PHP functions, such as creating administrator accounts. | 24 Oct |
| CVE-2026-98959 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated--- | 24 Oct |
| CVE-2026-98548 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing. | 24 Oct |
| CVE-2026-68502 | 9.8 critical | 1.0% | no CPE yet | LazyOwn RedTeam/APT Framework is an AI-powered C2 and red-team operations framework. Prior to 0.2.154, LazyOwn's lazyc2.py registers an unauthenticated Socket.IO input event handler that dispatches data.get('value') to LazyOwnShell.one_cmd, reaching LazyOwnShell.do_cmd and subprocess.call(command, shell=True), allowing unauthenticated remote code execution in the C2 process. This issue is fixed in 0.2.154. | 23 Oct |
| CVE-2026-10025 | 9.8 critical | 1.0% | ibm, qradar_security_information_and_event_manager | IBM QRadar 7.6.0.0 through 7.6.0.1, and 7.5.0 through 7.5.0 UP 15 Interim Fix 005 has an XML External Entity (XXE) injection vulnerability. The vulnerability resides in the parseXmlPayload() function within the event processing pipeline ( q1labs_core.jar ). When at least one log source type is configured to use XML-format property autodetection, the system processes XML-formatted syslog events sent to port 514 (UDP/TCP) without authentication. | 23 Oct |
| CVE-2026-16770 | 9.8 critical | 1.0% | no CPE yet | PDF::WebKit versions through 1.2 for Perl allow argument injection into wkhtmltopdf via meta tags in the source document. For an HTML string or file source, the constructor collects every <meta name="pdf-webkit-KEY" content="VALUE"> element in the document head through _pdf_webkit_meta_tags and turns each one into a wkhtmltopdf command line option. KEY is normalized to an option name matching --[a-z0-9-]+ but is not checked against an allow list, VALUE is passed through unchanged as the argument that follows it, and a VALUE of "yes" emits the option as a bare flag. BUILD merges the meta derived options last, so they also override the module defaults and the options passed to new. Switches such as --enable-local-file-access and --cookie-jar are reachable this way. The renderer is executed with an argument list rather than a shell command, so this is argument injection and not shell injection. Any caller that renders untrusted HTML lets the document choose the renderer's options and override those set by the application, including options that read local files into the resulting PDF or write to a chosen path. A URL source is not scanned, and the scan is skipped when XML::LibXML, a recommended dependency, is not installed. | 23 Oct |
| CVE-2026-63887 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) | 22 Oct |
50 of 231 · Next
Download these 231 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.