Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-111045 | 7.5 high | 0.00% | no CPE yet | CLI Bridge provides filesystem access within a workspace root. Prior to 0.0.2, a dangling symlink pointing outside the workspace root bypasses resolveSafePath when fs.realpathSync throws ENOENT for a nonexistent target. The fallback resolves only the parent directory and returns the symlink path as safe, so write_file follows the link and can write arbitrary files outside the workspace root. This issue is fixed in version 0.0.2. | 19 Oct |
| CVE-2026-83535 | 7.4 high | 0.00% | no CPE yet | A flaw was found in openstack-network-exporter. When an operator configures user authentication but omits or misconfigures Transport Layer Security (TLS), the basic authentication mechanism is silently bypassed. This fail-open design allows an adjacent network attacker to access sensitive Open vSwitch (OVS) and Open Virtual Network (OVN) dataplane metrics without credentials. Consequently, an attacker can enumerate bridge names, port counters, OVN controller state, and host topology, leading to information disclosure. | 15 Oct |
| CVE-2026-0237 | 7.3 high | 0.00% | paloaltonetworks, prisma_browser | An improper protection of alternate path vulnerability in Palo Alto Networks Prisma® Browser on macOS fails to properly restrict access to an internal automation bridge. This allows a locally authenticated non-admin user to leverage an exposed communication channel to send unauthorized commands to the browser, bypassing security controls. | Mon 26 Oct |
| CVE-2026-80664 | 7.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"), so this patch is no longer critical. Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra family check is a good idea in any case. ] | 16 Oct |
| CVE-2026-72416 | 7.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_compat: ebtables emulation must reject non-bridge targets xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so on. ebtables targets return incompatible verdicts: EBT_ACCEPT, EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC. ebtables doesn't permit this since 11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets") but that commit missed the nft_compat layer. | 16 Oct |
| CVE-2026-54702 | 7.3 high | 0.00% | no CPE yet | Markdown Preview Enhanced is a Markdown preview extension for Visual Studio Code. Prior to 0.8.30, the webview message handler in src/preview-provider.ts accepts an attacker-controlled command value and attacker-controlled args, constructs a command in the _crossnote namespace, and invokes vscode.commands.executeCommand without an allowlist or type validation. JavaScript already executing in the preview webview can use this bridge to invoke privileged extension commands, including file modification, code-chunk execution, export-tool execution, and arbitrary URL opening, with attacker-selected arguments. Exploitation requires a separate webview JavaScript execution path, such as the independently tracked .crossnote/head.html injection, but no further authorization check protects the extension-host command boundary. This issue is fixed in version 0.8.30. | 16 Oct |
| CVE-2026-46555 | 7.1 high | 0.00% | verygoodplugins, whatsapp_mcp_server | WhatsApp MCP Server is a Model Context Protocol (MCP) server for WhatsApp, enabling Claude to read and send WhatsApp messages. Prior to version 0.2.1, the `whatsapp-bridge` HTTP API listens on `127.0.0.1:8080` without authentication and without Host header validation, and the `/api/send` endpoint accepts an absolute `media_path` parameter without confining it to a safe directory. Combined, these issues allow any local process running as the same user as the bridge to send WhatsApp messages from the paired account without authorization; the same caller to read arbitrary files readable by the user (e.g. SSH private keys, browser session data, source code, dotfiles) and exfiltrate them as WhatsApp document attachments; and/or a remote attacker to trigger the same operations via DNS rebinding from a webpage the user visits, since no Host header validation is performed. In MCP environments, "local caller" extends beyond processes the user explicitly launched — sibling MCP servers, IDE extensions, and tool-triggered flows running in the user's session can act as the effective caller. This issue is fixed in whatsapp-mcp v0.2.1 and corresponding Docker images / release artifacts. Users should upgrade immediately. The fix introduces bearer token authentication on the bridge HTTP API (configured via environment variable, required on all requests, validated with constant-time comparison); host header allow-list validation to prevent DNS rebinding; and confinement of `media_path` to a configured directory, with rejection of absolute paths outside the root and path traversal sequences. This is a breaking change for clients of the bridge API. For users who cannot immediately upgrade: Stop the bridge, or block loopback access to port 8080, when the bridge is not actively in use; avoid running the bridge alongside untrusted MCP servers, browser extensions, or other untrusted local processes; avoid browsing untrusted sites while the bridge is running (DNS rebinding mitigation); and/or run the bridge under a dedicated user account or in a sandbox/container with no access to sensitive files. | Sat 24 Oct |
| CVE-2026-64411 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy. | 19 Oct |
| CVE-2024-50035 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ppp: fix ppp_async_encode() illegal access syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 | 15 Oct |
| CVE-2026-109441 | 6.9 medium | 0.00% | no CPE yet | LangAlpha through 2026.09.07 contains an improper isolation vulnerability that places all tenants' sandbox containers on Docker's shared default bridge network with inter-container communication enabled. Authenticated users with code execution in their own sandbox can connect directly to other tenants' containers, bypassing require_workspace_owner checks to read files such as vault secrets from exposed servers. | 20 Oct |
| CVE-2026-13318 | 6.4 medium | 0.00% | kubevirt, redhat, openshift_virtualization | A server-side request forgery (SSRF) flaw was found in KubeVirt's virt-api port-forward handler. When processing a port-forward request to a VirtualMachineInstance (VMI), virt-api reads the target IP from vmi.Status.Interfaces[0].IP and passes it directly to net.Dial() without validation. For VMIs using non-masquerade network bindings (bridge or secondary-only), this IP is reported by the QEMU guest agent running inside the VM and is fully controllable by the VM owner. An attacker with kubevirt.io:edit permissions can create a VM with a modified guest agent that reports an arbitrary IP address, then request port-forward to establish a bidirectional TCP tunnel from virt-api's cluster-internal network position to any routable destination, bypassing NetworkPolicy isolation. | Sun 25 Oct |
| CVE-2026-64650 | 6.3 medium | 0.00% | no CPE yet | The `@ai-sdk/harness-opencode` tool is an HarnessV1 adapter backed by @openai/codex-sdk, which drives the codex command line interface. Prior to version 1.0.29, the tool relay authorizes requests from any process whose command line contains an allowed helper script path (the Codex CLI shim). This allows untrusted code executing in the sandbox to invoke arbitrary host-exposed tools, including secret lookups, deployment operations, and cloud API calls without a corresponding model-authorized tool-call event. Exploitation requires a Linux environment (the vulnerable fallback checks `process.platform === 'linux'` and reads `/proc`); an active harness session with one or more host-provided tools; and untrusted code executing in the sandbox (e.g. a malicious dependency, build script, or lifecycle hook) The fix in version 1.0.29 removes the process-path authorization fallback entirely. Relay requests are now only accepted after exact, short-lived, one-time authorization matching the tool name and input from a bridge-observed model event. Some workarounds are available. Do not run the Codex harness on untrusted repositories or with untrusted dependencies, and/or limit host-exposed tools to non-sensitive operations when working with untrusted code. | Sat 24 Oct |
| CVE-2026-64651 | 6.3 medium | 0.00% | no CPE yet | The `@ai-sdk/harness-opencode` tool connects HarnessAgent to OpenCode through a sandboxed bridge. Prior to version 1.0.28, the tool relay authorizes requests from any process whose command line contains an allowed helper script path (`host-tool-mcp.mjs`). This allows untrusted code executing in the sandbox to invoke arbitrary host-exposed tools including secret lookups, deployment operations, and cloud API calls without a corresponding model-authorized tool-call event. Exploitation requires a Linux environment (the vulnerable fallback checks `process.platform === 'linux'` and reads `/proc`); an active harness session with one or more host-provided tools; and untrusted code executing in the sandbox (e.g. a malicious dependency, build script, or lifecycle hook) The fix in version 1.0.28 removes the process-path authorization fallback entirely. Relay requests are now only accepted after exact, short-lived, one-time authorization matching the tool name and input from a bridge-observed model event. Some workarounds are available. Do not run the OpenCode harness on untrusted repositories or with untrusted dependencies, and/or limit host-exposed tools to non-sensitive operations when working with untrusted code. | Sat 24 Oct |
| CVE-2026-54785 | 6.2 medium | 0.00% | no CPE yet | gemini-bridge is a lightweight MCP server bridging AI agents to Google's Gemini AI via the official CLI. From 1.0.0 until 1.3.1, consult_gemini_with_files in inline mode read any file path supplied in the files argument without confining it to the working directory, then forwarded the contents to the Gemini CLI. Because the caller also controls query, the file contents are echoed back through the Gemini round-trip (and sent to Google), making this an arbitrary local file read. This issue is fixed in version 1.3.1. | Fri 23 Oct |
| CVE-2026-45404 | 5.9 medium | 0.00% | no CPE yet | OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0. | 12 Oct |
| CVE-2026-54703 | 5.8 medium | 0.00% | no CPE yet | Markdown Preview Enhanced is a Markdown preview extension for Visual Studio Code. Prior to 0.8.30, the _crossnote.updateMarkdown command in Markdown Preview Enhanced accepts an arbitrary URI and attacker-controlled content, then passes them to vscode.workspace.fs.writeFile without validating that the target is the Markdown file represented by the current preview. JavaScript already executing in the preview webview can invoke this command through the extension message bridge and write any file permitted by the VS Code user's operating-system privileges, including user configuration, startup, source, and build files. This file-write vulnerability requires a separate webview JavaScript execution path, such as the independently tracked head.html injection and blind command-dispatch weaknesses. This issue is fixed in version 0.8.30. | 16 Oct |
| CVE-2023-22231 | 5.5 medium | 0.00% | adobe, bridge | Adobe Bridge versions 12.0.3 (and earlier) and 13.0.1 (and earlier) are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | 16 h ago |
| CVE-2026-7386 | 5.5 medium | 0.00% | no CPE yet | A flaw has been found in fatbobman mail-mcp-bridge up to 1.3.3. Affected is an unknown function of the file src/mail_mcp_server.py. Executing a manipulation of the argument message_ids can lead to path traversal. The attack can be executed remotely. The exploit has been published and may be used. Upgrading to version 1.3.4 is able to address this issue. This patch is called 638b162b26532e32fa8d8047f638537dbdfe197a. Upgrading the affected component is recommended. | Mon 26 Oct |
| CVE-2026-53220 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: revalidate bridge ports ebt_redirect_tg() dereferences br_port_get_rcu() return without a NULL check, causing a kernel panic when the bridge port has been removed between the original hook invocation and an NFQUEUE reinject. A mere NULL check isn't sufficient, however. As sashiko review points out userspace can not only remove the port from the bridge, it could also place the device in a different virtual device, e.g. macvlan. If this happens, we must drop the packet, there is no way for us to reinject it into the bridge path. Switch to _upper API, we don't need the bridge port structure. Also, this fix keeps another bug intact: Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER too aggressive, which prevents certain logging features when queueing in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old CONFIG_BRIDGE_NETFILTER cruft is off. Fixes tag is a common ancestor, this was always broken. | 21 Oct |
| CVE-2025-39851 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD when refreshing an FDB entry with a nexthop object VXLAN FDB entries can point to either a remote destination or an FDB nexthop group. The latter is usually used in EVPN deployments where learning is disabled. However, when learning is enabled, an incoming packet might try to refresh an FDB entry that points to an FDB nexthop group and therefore does not have a remote. Such packets should be dropped, but they are only dropped after dereferencing the non-existent remote, resulting in a NPD [1] which can be reproduced using [2]. Fix by dropping such packets earlier. Remove the misleading comment from first_remote_rcu(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_snoop+0x98/0x1e0 [...] Call Trace: <TASK> vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q | 21 Oct |
| CVE-2025-39850 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objects When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 | 21 Oct |
| CVE-2025-39773 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix soft lockup in br_multicast_query_expired() When set multicast_query_interval to a large value, the local variable 'time' in br_multicast_send_query() may overflow. If the time is smaller than jiffies, the timer will expire immediately, and then call mod_timer() again, which creates a loop and may trigger the following soft lockup issue. watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66] CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none) Call Trace: <IRQ> __netdev_alloc_skb+0x2e/0x3a0 br_ip6_multicast_alloc_query+0x212/0x1b70 __br_multicast_send_query+0x376/0xac0 br_multicast_send_query+0x299/0x510 br_multicast_query_expired.constprop.0+0x16d/0x1b0 call_timer_fn+0x3b/0x2a0 __run_timers+0x619/0x950 run_timer_softirq+0x11c/0x220 handle_softirqs+0x18e/0x560 __irq_exit_rcu+0x158/0x1a0 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> This issue can be reproduced with: ip link add br0 type bridge echo 1 > /sys/class/net/br0/bridge/multicast_querier echo 0xffffffffffffffff > /sys/class/net/br0/bridge/multicast_query_interval ip link set dev br0 up The multicast_startup_query_interval can also cause this issue. Similar to the commit 99b40610956a ("net: bridge: mcast: add and enforce query interval minimum"), add check for the query interval maximum to fix this issue. | 19 Oct |
| CVE-2025-39703 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: net, hsr: reject HSR frame if skb can't hold tag Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR fr ---truncated--- | 19 Oct |
| CVE-2025-39894 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm When send a broadcast packet to a tap device, which was added to a bridge, br_nf_local_in() is called to confirm the conntrack. If another conntrack with the same hash value is added to the hash table, which can be triggered by a normal packet to a non-bridge device, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200 CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary) RIP: 0010:br_nf_local_in+0x168/0x200 Call Trace: <TASK> nf_hook_slow+0x3e/0xf0 br_pass_frame_up+0x103/0x180 br_handle_frame_finish+0x2de/0x5b0 br_nf_hook_thresh+0xc0/0x120 br_nf_pre_routing_finish+0x168/0x3a0 br_nf_pre_routing+0x237/0x5e0 br_handle_frame+0x1ec/0x3c0 __netif_receive_skb_core+0x225/0x1210 __netif_receive_skb_one_core+0x37/0xa0 netif_receive_skb+0x36/0x160 tun_get_user+0xa54/0x10c0 tun_chr_write_iter+0x65/0xb0 vfs_write+0x305/0x410 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- To solve the hash conflict, nf_ct_resolve_clash() try to merge the conntracks, and update skb->_nfct. However, br_nf_local_in() still use the old ct from local variable 'nfct' after confirm(), which leads to this warning. If confirm() does not insert the conntrack entry and return NF_DROP, the warning may also occur. There is no need to reserve the WARN_ON_ONCE, just remove it. | 19 Oct |
| CVE-2025-39769 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix lockdep warning during rmmod The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] | 19 Oct |
| CVE-2025-39934 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference. | 19 Oct |
| CVE-2025-21970 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Bridge, fix the crash caused by LAG state check When removing LAG device from bridge, NETDEV_CHANGEUPPER event is triggered. Driver finds the lower devices (PFs) to flush all the offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns false if one of PF is unloaded. In such case, mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of the alive PF, and the flush is skipped. Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be ignored in this case because the upper interface for bond is deleted, and the entry will never be aged because lastuse is never updated. To make things worse, as the entry is alive, mlx5 bridge workqueue keeps sending that event, which is then handled by kernel bridge notifier. It causes the following crash when accessing the passed bond netdev which is already destroyed. To fix this issue, remove such checks. LAG state is already checked in commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding bond to bridge"), driver still need to skip offload if LAG becomes invalid state after initialization. Oops: stack segment: 0000 [#1] SMP CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G OE 6.11.0_mlnx #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core] RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge] Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? die+0x38/0x60 ? do_trap+0x10b/0x120 ? do_error_trap+0x64/0xa0 ? exc_stack_segment+0x33/0x50 ? asm_exc_stack_segment+0x22/0x30 ? br_switchdev_event+0x2c/0x110 [bridge] ? sched_balance_newidle.isra.149+0x248/0x390 notifier_call_chain+0x4b/0xa0 atomic_notifier_call_chain+0x16/0x20 mlx5_esw_bridge_update+0xec/0x170 [mlx5_core] mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core] process_scheduled_works+0x81/0x390 worker_thread+0x106/0x250 ? bh_worker+0x110/0x110 kthread+0xb7/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK> | 15 Oct |
| CVE-2025-21890 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) | 15 Oct |
| CVE-2022-49092 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix route with nexthop object delete warning FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f2455 ---truncated--- | 15 Oct |
| CVE-2026-53325 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. | 15 Oct |
| CVE-2026-46092 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | 15 Oct |
| CVE-2026-46086 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | 15 Oct |
| CVE-2026-31752 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | 15 Oct |
| CVE-2026-31424 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: <TASK> nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) </TASK> Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations. | 15 Oct |
| CVE-2026-23381 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: <IRQ> ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled. | 15 Oct |
| CVE-2025-22111 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | 15 Oct |
| CVE-2024-58071 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: team: prevent adding a device which is already a team device lower Prevent adding a device which is already a team device lower, e.g. adding veth0 if vlan1 was already added and veth0 is a lower of vlan1. This is not useful in practice and can lead to recursive locking: $ ip link add veth0 type veth peer name veth1 $ ip link set veth0 up $ ip link set veth1 up $ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1 $ ip link add team0 type team $ ip link set veth0.1 down $ ip link set veth0.1 master team0 team0: Port device veth0.1 added $ ip link set veth0 down $ ip link set veth0 master team0 ============================================ WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted -------------------------------------------- ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(team->team_lock_key); lock(team->team_lock_key); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/7684: stack backtrace: CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_deadlock_bug.cold (kernel/locking/lockdep.c:3040) __lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226) ? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548) lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2)) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? lock_acquire (kernel/locking/lockdep.c:5822) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) __mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? fib_sync_up (net/ipv4/fib_semantics.c:2167) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) __dev_notify_flags (net/core/dev.c:8993) ? __dev_change_flags (net/core/dev.c:8975) dev_change_flags (net/core/dev.c:9027) vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470) ? br_device_event (net/bridge/br.c:143) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) dev_open (net/core/dev.c:1519 net/core/dev.c:1505) team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977) ? __pfx_team_add_slave (drivers/net/team/team_core.c:1972) do_set_master (net/core/rtnetlink.c:2917) do_setlink.isra.0 (net/core/rtnetlink.c:3117) | 15 Oct |
| CVE-2024-46750 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock() One of the true positives that the cfg_access_lock lockdep effort identified is this sequence: WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: <TASK> ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120 Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself. For the same motivation as adding: bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge); to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock(). [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/[email protected]] | 15 Oct |
| CVE-2024-27004 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux, fedora | In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be ---truncated--- | 15 Oct |
| CVE-2024-26855 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink() The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. | 15 Oct |
| CVE-2026-100126 | 5.5 medium | 0.00% | no CPE yet | Bridge is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | 14 Oct |
| CVE-2026-108897 | 5.5 medium | 0.00% | no CPE yet | A security vulnerability has been detected in Smart Media4U Technology SHAREit App 6.27.38_ww on Android. The impacted element is the function syncInvoke of the component WebView JS Bridge. The manipulation leads to exposed dangerous routine. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 13 Oct |
| CVE-2026-63988 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | 8 Oct |
| CVE-2026-63989 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port and NHID: Only require RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the three STP related attributes that require it. This is consistent with the multicast attributes where each attribute acquires the multicast lock instead of having one critical section for all relevant attributes. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 2 locks held by bridge/356: #0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002) #1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) br_setport (net/bridge/br_netlink.c:1000) br_setlink (net/bridge/br_netlink.c:1118) rtnl_bridge_setlink (net/core/rtnetlink.c:5572) rtnetlink_rcv_msg (net/core/rtnetlink.c:7005) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | 8 Oct |
| CVE-2025-54278 | 5.5 medium | 0.00% | adobe, bridge | Bridge versions 14.1.8, 15.1.1 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could lead to memory exposure. An attacker could leverage this vulnerability to disclose sensitive information stored in memory. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | 8 Oct |
| CVE-2026-1636 | 5.4 medium | 0.00% | lenovo, service_bridge | A potential DLL hijacking vulnerability was reported in Lenovo Service Bridge that, under certain conditions, could allow a local authenticated user to execute code with elevated privileges. | Mon 26 Oct |
| CVE-2025-11166 | 5.4 medium | 0.00% | no CPE yet | The WP Go Maps (formerly WP Google Maps) plugin for WordPress is vulnerable to Cross-Site Request Forgery (CSRF) in all versions up to, and including, 9.0.46. This is due to the plugin exposing state-changing REST actions through an AJAX bridge without proper CSRF token validation, and having destructive logic reachable via GET requests with no permission_callback. This makes it possible for unauthenticated attackers to force logged-in administrators to create, update, or delete markers and geometry features via CSRF attacks, and allows anonymous users to trigger mass deletion of markers via unsafe GET requests. | 8 Oct |
| CVE-2026-113669 | 5.3 medium | 0.00% | no CPE yet | ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0 of ApostropheCMS and 1.6.1 of passport-bridge, cross-host or cross-locale session migration places a single-use bearer session token in a redirect URL. A client that obtains and redeems a still-valid, unconsumed token before its first use can adopt the associated session, including through the passport-bridge cross-locale flow. This issue is fixed in ApostropheCMS 4.33.0 and passport-bridge 1.6.1. | Fri 23 Oct |
| CVE-2026-59323 | 5.3 medium | 0.00% | no CPE yet | An application using Micrometer Tracing with W3C baggage propagation in the Brave bridge is vulnerable to denial of service (DoS) due to unbounded object allocation when extracting incoming baggage headers. Micrometer Tracing 1.7.0 Micrometer Tracing 1.6.0 - 1.6.6 Micrometer Tracing 1.5.0 - 1.5.12 Micrometer Tracing 1.4.13 and earlier | 16 Oct |
| CVE-2026-45243 | 5.3 medium | 0.00% | steipete, summarize | Summarize prior to 0.15.1 contains a missing authorization vulnerability in the content script window.postMessage bridge that allows malicious pages to perform unauthorized operations on automation artifacts. Attackers can simulate runtime messages with spoofed sender identifiers to list, read, create, overwrite, or delete automation artifacts scoped to the affected tab without proper authorization checks. | 14 Oct |
Download these 185 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.