Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-89653 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode MDSMap export_targets entries are monitor controlled. check_new_map() uses each entry as a bit number in a fixed stack bitmap, so a rank outside the protocol namespace can make set_bit() write past the end of the array. Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not validate against possible_max_rank here because maps may legitimately reference ranks beyond a temporarily reduced max_mds. | 19 Oct |
| CVE-2026-80976 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headers and makes the inner packet the skb network header. The IPv6 control block still contains values collected while parsing the outer packet, including nhoff and extension-header flags. End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6 input path. An unprivileged user can reach End.DT6 from a user and net namespace by installing a local SID and injecting an outer packet with Hop-by-Hop and Destination Options headers followed by an SRH and a minimal inner IPv6 packet. The outer extension headers leave a large nhoff in IP6CB. After decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the inner packet and reads beyond the skb head. KASAN reports: BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu ip6_protocol_deliver_rcu+0x1118/0x1450 ip6_input_finish+0x11b/0x240 seg6_local_input_core+0xed/0x2e0 lwtunnel_input+0x1e9/0x4e0 ipv6_rthdr_rcv+0x525f/0x6c50 ip6_protocol_deliver_rcu+0xcb7/0x1450 Before clearing IP6CB for an inner IPv6 packet, save its incoming interface index and L3 slave state. Restore both after the clear and set nhoff to the inner IPv6 base-header nexthdr field. Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can replace skb_iif with the L3 master while IP6CB keeps the receiving interface. Preserve IP6SKB_L3SLAVE for the same reason. | 19 Oct |
| CVE-2025-68192 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixup Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 | 15 Oct |
| CVE-2025-10640 | 9.8 critical | 1.0% | no CPE yet | An unauthenticated attacker with access to TCP port 12306 of the WorkExaminer server can exploit missing server-side authentication checks to bypass the login prompt in the WorkExaminer Professional console to gain administrative access to the WorkExaminer server and therefore all sensitive monitoring data. This includes monitored screenshots and keystrokes of all users. The WorkExaminer Professional console is used for administrative access to the server. Before access to the console is granted administrators must login. Internally, a custom protocol is used to call a respective stored procedure on the MSSQL database. The return value of the call is not validated on the server-side. Instead it is only validated client-side which allows to bypass authentication. | 8 Oct |
| CVE-2025-66222 | 9.6 critical | 1.0% | thinkinai, deepchat | DeepChat is a smart assistant uses artificial intelligence. In 0.5.0 and earlier, there is a Stored Cross-Site Scripting (XSS) vulnerability in the Mermaid diagram renderer allows an attacker to execute arbitrary JavaScript within the application context. By leveraging the exposed Electron IPC bridge, this XSS can be escalated to Remote Code Execution (RCE) by registering and starting a malicious MCP (Model Context Protocol) server. | 18 Oct |
| CVE-2026-75143 | 9.3 critical | 1.0% | no CPE yet | FFmpeg before commit 1c10bcc contains a heap buffer overflow in the RIST protocol reader (libavformat/librist.c). librist_read() ignored its size argument and copied the full received payload length into the caller-provided destination buffer, overflowing it when the payload exceeds the destination size. This is reachable via the async:rist:// URL scheme, where the async wrapper supplies a smaller buffer than the received payload. A remote RIST sender can trigger the overflow by sending a packet whose payload exceeds the caller buffer size. | Tue 27 Oct |
| CVE-2026-35087 | 9.3 critical | 1.0% | no CPE yet | Slican telephone exchanges allow administrative protocol authentication bypass. An attacker can bypass the need to enter login credentials by executing the appropriate command. This issue was fixed in versions below: - NCP: version 1.24.0250 - IPx series: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. | Mon 26 Oct |
| CVE-2026-35090 | 9.3 critical | 1.0% | no CPE yet | In Slican telephone exchanges it is possible to manage the control panel remotely. An unauthenticated attacker can connect to the modem via a telephone with a specific caller ID. This allows them to bypass admin authentication and gain full access to the service protocol and configuration panel. This vulnerability is independent of the telephone exchanges configuration. If remote access is disabled, calling with this caller ID will temporarily enable it. This issue was fixed in versions below: - IPL-256: version 6.61.0040 - IPM-032: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. | Mon 26 Oct |
| CVE-2026-67531 | 9.3 critical | 1.0% | no CPE yet | FrontMCP is a TypeScript-first framework for the Model Context Protocol (MCP). Prior to 1.5.7, the sandboxed codecall:execute tool exposes live host Zod schema instances to the script via getTool(), and because Zod v4 defines _zod as a non-configurable, non-writable own property, the ECMAScript Proxy invariants force the security membrane to hand back the raw host object, letting a script reach _zod.constr.constructor (the host Function constructor) and execute arbitrary code in the server process. A single tools/call is sufficient to escape the sandbox and achieve remote code execution as the server user, exposing everything the process holds such as OAuth client secrets, JWT_SECRET, session keys, database credentials, and cloud instance metadata. Because the framework's DEFAULT_AUTH_OPTIONS is public mode, an unconfigured server serves this to unauthenticated callers, and on authenticated servers an indirect prompt injection in tool output or fetched content can trigger it without a human attackerThis issue is fixed in version 1.5.7. | 24 Oct |
| CVE-2026-61514 | 9.3 critical | 1.0% | no CPE yet | Puwell IP Camera firmware versions 2.x through 4.x contains an authentication bypass vulnerability that allows unauthenticated attackers to access device functions by sending protocol-conforming packets over TCP port 23456 without credentials. Attackers can exploit the unvalidated Session field in the proprietary control protocol header to access live video streams, control pan and tilt motors, activate audio functions, and remotely restart the device. | 23 Oct |
| CVE-2026-75854 | 9.3 critical | 1.0% | no CPE yet | ArcadeDB versions before 26.8.1 contain a missing authentication vulnerability in the Redis wire-protocol plugin that allows unauthenticated attackers to read, write, and delete data. Attackers can connect to the Redis port and execute arbitrary commands against any database on the server without providing credentials, bypassing all security gates. | 22 Oct |
| CVE-2026-75852 | 9.3 critical | 1.0% | no CPE yet | ArcadeDB versions before 26.8.1 fail to enforce SASL authentication on data commands in the MongoDB wire-protocol plugin. Unauthenticated attackers can issue insert, find, update, delete, and create commands against any database by connecting to port 27017 without credentials. | 22 Oct |
| CVE-2026-109439 | 9.3 critical | 1.0% | no CPE yet | Lantronix XPress-DR and XPress-DR-I (CoBos-family) firmware through 8.1.0.0 contains a missing authentication vulnerability that allows remote attackers to read and persistently overwrite device configuration by sending crafted frames to the unauthenticated UDP configuration protocol on port 30718. Attackers can send a type 0xF8 query to read live configuration data and a type 0xFD frame with exactly 0x78 body bytes to rewrite the device IP address and serial-channel forwarding records, causing changes to commit to EEPROM and persist across reboots. The XPress-DR product series reached end-of-life/end-of-support in February 2025. | 16 Oct |
| CVE-2026-101990 | 9.3 critical | 1.0% | no CPE yet | A Stack-based Buffer Overflow vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote configured BGP peer to cause an rpd crash, or on Junos OS remote code-execution, via sending a flow-spec update which is selected for re-advertisement. | 16 Oct |
| CVE-2026-101982 | 9.3 critical | 1.0% | no CPE yet | A Stack-based Buffer Overflow vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP/EVPN peer to cause root code execution on Junos OS or an rpd crash on Junos OS Evolved via protocol-valid route advertisements for an EVPN-VPWS service. | 16 Oct |
| CVE-2026-33796 | 9.3 critical | 1.0% | no CPE yet | A Stack-based Buffer Overflow vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured external BGP neighbor to execute arbitrary commands with root privileges via BMP route monitoring. | 15 Oct |
| CVE-2026-85424 | 9.3 critical | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 lacks authentication in the wire protocol, allowing unauthenticated clients to connect with full publish, subscribe, and database clear privileges. Attackers can bypass the compile-time protocol string check and connect with arbitrary client names to execute privileged operations including DB_CLEAR which resets all variables and clears client mail queues. | 14 Oct |
| CVE-2026-33789 | 9.2 critical | 1.0% | no CPE yet | A Stack-based Buffer Overflow vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated BGP peer to cause a denial of service and potential root-level command execution via crafted BGP route updates when the BGP Monitoring Protocol (BMP) is enabled. | 15 Oct |
| CVE-2026-41167 | 9.1 critical | 1.0% | no CPE yet | Jellystat is a free and open source Statistics App for Jellyfin. Prior to version 1.1.10, multiple API endpoints in Jellystat build SQL queries by interpolating unsanitized request-body fields directly into raw SQL strings. An authenticated user can inject arbitrary SQL via `POST /api/getUserDetails` and `POST /api/getLibrary`, enabling full read of any table in the database - including `app_config`, which stores the Jellystat admin credentials, the Jellyfin API key, and the Jellyfin host URL. Because the vulnerable call site dispatches via `node-postgres`'s simple query protocol (no parameter array is passed), stacked queries are allowed, which escalates the injection from data disclosure to arbitrary command execution on the PostgreSQL host via `COPY ... TO PROGRAM`. Under the role shipped by the project's `docker-compose.yml` (a PostgreSQL superuser), no additional privileges are required to reach the RCE primitive. Version 1.1.10 contains a fix. | Mon 26 Oct |
| CVE-2026-11373 | 9.1 critical | 1.0% | no CPE yet | Net::Statsite::Client versions through 1.1.0 for Perl allow metric injections. Net::Statsite::Client is a client for the statsite protocol, which is a variant of statsd. Newlines are not removed from metric names, allowing metric injections. Values are not sanitised for newlines or other protocol control characters such as colons or pipes, allowing metric injections. | 25 Oct |
| CVE-2026-53791 | 9.1 critical | 1.0% | samba, rsync | rsync daemon before 3.5.0 contains an IP address spoofing vulnerability that allows unauthenticated remote attackers to bypass IP-based access controls by sending a crafted PROXY protocol header with a forged source address. Attackers who can connect directly to the rsync daemon can inject a spoofed source IP in the PROXY protocol header to circumvent hosts allow/deny rules, gaining unauthorized access that would otherwise be blocked based on their real source address. | 24 Oct |
| CVE-2026-76404 | 9.1 critical | 1.0% | splunk, model_context_protocol_server | In Splunk MCP Server app versions below 1.2.1, a user who holds the "admin" Splunk role could execute arbitrary commands on the underlying operating system. The vulnerability is possible because of missing input validation in the app's credential management component, which deserializes stored data without checking whether the content is of the expected type. | 24 Oct |
| CVE-2026-48039 | 9.1 critical | 1.0% | no CPE yet | Meta Ads MCP is a Model Context Protocol (MCP) server that lets AI assistants run Meta Ads. Prior to version 1.0.109, `AuthInjectionMiddleware.dispatch()` at `http_auth_integration.py:272` unconditionally forwards unauthenticated Streamable HTTP requests to downstream MCP tool handlers without issuing a `401` response, allowing any network-reachable caller to invoke MCP tools without authentication. When no per-request credential is present, tool handlers fall back to the `META_ACCESS_TOKEN` environment variable, and when the downstream Meta Graph API call fails, `api.py:263–269` serialises the raw `httpx` request URL—including the operator's `access_token` as a query parameter—into the JSON-RPC response body, delivering the credential to the unauthenticated caller. Version 1.0.109 fixes the issue. | 23 Oct |
| CVE-2026-64450 | 9.1 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state. | 19 Oct |
| CVE-2026-71485 | 9.1 critical | 1.0% | no CPE yet | Centrifugo is an open-source scalable real-time messaging server. Prior to 6.9.0, Centrifugo copies the client-controlled protocol.ConnectRequest.headers map through OnClientConnecting in internal/client/handler.go, ConnectEvent.Headers, and SetEmulatedHeadersToContext. The requestHeaders path in internal/proxy/http.go, the requestMetadata path in internal/proxy/grpc.go, and the Consume path in internal/unigrpc/grpc.go can forward an allowlisted value as a trusted backend header or metadata value. A remote client can spoof a header such as x-trusted-user for connect, refresh, subscribe, publish, RPC, and related proxy calls when the backend relies on that header for authentication or authorization. The unidirectional gRPC transport has no transport-level HTTP header that can override the emulated value. This issue is fixed in version 6.9.0. | 18 Oct |
| CVE-2026-73601 | 9.0 critical | 1.0% | flowiseai, flowise | Flowise versions before 3.1.3 contain a remote code execution vulnerability in the Custom MCP node when CUSTOM_MCP_PROTOCOL is set to stdio, allowing authenticated users to execute arbitrary commands by manipulating environment variables and command arguments. Attackers can abuse PYTHONWARNINGS and BROWSER environment variables with python3, or leverage the root working directory with node to bypass validation and execute system commands. | 24 Oct |
| CVE-2025-64163 | 8.9 high | 1.0% | dataease | DataEase is an open source data visualization analysis tool. In versions 2.10.14 and below, the vendor added a blacklist to filter ldap:// and ldaps://. However, omission of protection for the dns:// protocol results in an SSRF vulnerability. This issue is fixed in version 2.10.15. | 19 Oct |
| CVE-2026-79878 | 8.8 high | 1.0% | no CPE yet | A command injection vulnerability in the AOS-8 command line interface accessed by the PAPI protocol could lead to unauthenticated remote code execution by an adjacent attacker sending specially crafted PAPI packets destined to the PAPI UDP port 8211. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. | Fri 30 Oct |
| CVE-2026-89009 | 8.8 high | 1.0% | wavlink technology, wn535m1, wn535m3 | WAVLINK WN535M1 and WN535M3 routers running firmware prior to M35M1_V250922 contain an unauthenticated arbitrary file write vulnerability that allows remote attackers to overwrite any file on the device by sending a crafted payload to the sync_server daemon on TCP port 13136. The daemon, which runs as root and requires no authentication, accepts a 100-byte filename field in its protocol header without path canonicalization, allowing attackers to supply an absolute path and write arbitrary content to overwrite startup scripts or credential stores to achieve persistent system compromise. | Thu 29 Oct |
| CVE-2026-44870 | 8.8 high | 1.0% | arubanetworks, arubaos, sd-wan | Command injection vulnerabilities exist in the command line interface (CLI) service accessed by the PAPI protocol of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system. | Mon 26 Oct |
| CVE-2026-44871 | 8.8 high | 1.0% | arubanetworks, arubaos, sd-wan | Command injection vulnerabilities exist in the command line interface (CLI) service accessed by the PAPI protocol of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system. | Mon 26 Oct |
| CVE-2026-46414 | 8.8 high | 1.0% | no CPE yet | Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO's WebSocket control plane trusts client-supplied identity and role fields in task messages. A client connection can register as a normal device, but later send a TASK message claiming client_type="constellation" and target_id=<victim-device-id>. The server trusts the role and target values from the wire message rather than enforcing the role registered for that WebSocket connection. As a result, any authenticated WebSocket client with the shared server token can spoof the higher-privilege constellation role and dispatch attacker-controlled tasks to another connected device. The same client registry also allows duplicate client_id registration, overwriting an existing live client's stored websocket, role, and task protocol. This is an authenticated WebSocket role/identity spoofing issue leading to peer task hijacking. | Mon 26 Oct |
| CVE-2026-46519 | 8.8 high | 1.0% | no CPE yet | mcp-server-kubernetes is a Model Context Protocol server for Kubernetes cluster management. Prior to version 3.6.0, mcp-server-kubernetes exposes three environment variables (ALLOW_ONLY_READONLY_TOOLS, ALLOW_ONLY_NON_DESTRUCTIVE_TOOLS, ALLOWED_TOOLS) documented as access controls for restricting which Kubernetes operations are available. These controls are enforced at the tool discovery layer (tools/list) but not at the execution layer (tools/call). Any client that knows a tool name can invoke it directly regardless of the configured restriction mode. The access control was effectively cosmetic. This issue has been patched in version 3.6.0. | Mon 26 Oct |
| CVE-2026-62785 | 8.8 high | 1.0% | microsoft, windows_10_1607, windows_10_1809, windows_10_21h2 | Heap-based buffer overflow in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to execute code over a network. | 24 Oct |
| CVE-2026-62795 | 8.8 high | 1.0% | microsoft, windows_10_1607, windows_10_1809, windows_10_21h2 | Use after free in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to execute code over a network. | 24 Oct |
| CVE-2025-64109 | 8.8 high | 1.0% | no CPE yet | Cursor is a code editor built for programming with AI. In versions and below, a vulnerability in the Cursor CLI Beta allowed an attacker to achieve remote code execution through the MCP (Model Context Protocol) server mechanism by uploading a malicious MCP configuration in .cursor/mcp.json file in a GitHub repository. Once a victim clones the project and opens it using Cursor CLI, the command to run the malicious MCP server is immediately executed without any warning, leading to potential code execution as soon as the command runs. This issue is fixed in version 2025.09.17-25b418f. | 19 Oct |
| CVE-2026-55191 | 8.7 high | 1.0% | freerdp | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients that negotiate RDPGFX AVC444 with an H.264 decoder backend calculate the intermediate YUV444 allocation size in libfreerdp/codec/h264.c with 32-bit multiplication in avc444_ensure_buffer. A malicious RDP server can supply surface dimensions for which piDstStride multiplied by padDstHeight wraps to a small nonzero value, causing winpr_aligned_recalloc to allocate an undersized buffer before YUV420CombineToYUV444 writes using the actual stride and rectangle dimensions. This can cause a client crash and may permit code execution through attacker-influenced heap corruption. This issue is fixed in version 3.27.0. | Mon 26 Oct |
| CVE-2026-55194 | 8.7 high | 1.0% | freerdp | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, rpc_client_recv_fragment in libfreerdp/core/gateway/rpc_client.c ensures the response reassembly stream capacity using only the server-declared alloc_hint rather than the actual StubLength about to be written. A malicious TS Gateway can send a PTYPE_RESPONSE with a small alloc_hint and a much larger frag_length, causing Stream_Write to copy attacker-controlled stub data beyond the 4096-byte pdu->s buffer. This can crash the client and may permit code execution through heap corruption. This issue is fixed in version 3.27.0. | Mon 26 Oct |
| CVE-2026-59803 | 8.7 high | 1.0% | no CPE yet | rpcx through 1.9.3, fixed in commit 047aec1, contains a denial-of-service vulnerability in protocol.Message.Decode (protocol/message.go). When a message has the compression flag set, the payload is gzip-decompressed via util.Unzip with no limit on the decompressed output size. The only built-in size guard, protocol.MaxMessageLength, is checked against the compressed on-the-wire frame length, not the decompressed size, so it provides no protection. Because decoding (and decompression) occurs in readRequest before authentication, a single unauthenticated connection can send a small (under 2 MB) gzip-compressed message that expands to gigabytes of heap allocation, leading to out-of-memory conditions and service unavailability. | 25 Oct |
| CVE-2026-59260 | 8.7 high | 1.0% | no CPE yet | OpenWrt luci-app-samba4 read ACL grants file.exec permission on /usr/sbin/smbd, allowing authenticated delegated users to execute the Samba daemon with caller-controlled command-line arguments. Attackers can pass arbitrary Samba global options such as message command to a root smbd process, triggering command execution when SMB protocol messages are processed. | 24 Oct |
| CVE-2026-11826 | 8.7 high | 1.0% | no CPE yet | OpenPLC_v3 contains a heap-based buffer overflow in the getData() function in webserver/core/modbus_master.cpp. getData() reads characters between two delimiters into a caller-supplied buffer with no size parameter and no bounds check. In parseConfig() the function is invoked with the 100-byte heap-allocated MB_device.dev_name field. An authenticated attacker with access to the OpenPLC web interface can send a crafted HTTP POST to the /modbus endpoint with an oversized device_name value; the value is persisted to mbconfig.cfg and parsed on load, overflowing dev_name and overwriting adjacent struct fields (protocol at offset 108, dev_address at offset 109, ip_port at offset 210). A 200-byte payload writes 100 bytes past the allocation. The result is heap corruption leading to runtime crash and denial of service of the PLC process control loop, with attacker-controlled overwrite of adjacent configuration fields. The upstream repository was archived on 2026-04-04 and no fix is expected; the vendor has confirmed the issue does not affect OpenPLC Runtime v4. | 24 Oct |
| CVE-2026-60109 | 8.7 high | 1.0% | zeek | Zeek before 8.0.9 contains a null pointer dereference vulnerability in its Kerberos protocol analyzer that allows unauthenticated remote attackers to crash the sensor by sending a crafted KRB_ERROR message with error-code 25 (KDC_ERR_PREAUTH_REQUIRED) containing a PA-DATA element with padata-type 2, 3, 11, or 19. Attackers can exploit a parser and analyzer state mismatch where proc_padata() dereferences an uninitialized pa_data_element field selected by the wrong parsing arm, triggering a crash via a single UDP or TCP packet to port 88 without any credentials or prior authentication. | 23 Oct |
| CVE-2026-75853 | 8.7 high | 1.0% | no CPE yet | ArcadeDB's Gremlin wire-protocol plugin (com.arcadedb:arcadedb-gremlin) in versions <= 26.7.3 enforces authentication (SASL PLAIN) but performs no authorization: it never checks database access permissions (canAccessToDatabase) and never binds the authenticated principal into the engine. As a result, any valid server credential — even one provisioned for zero or one unrelated database — can read, write, and drop data in any database on the server by selecting a target database via a traversal-source alias, completely bypassing the engine's per-type/read-only/UPDATE_SCHEMA ACLs. The issue is fixed in version 26.8.1. | 22 Oct |
| CVE-2026-102028 | 8.7 high | 1.0% | no CPE yet | A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause a denial of service when multiple UPDATEs occur over a single TCP session with 'bgp family l2vpn auto-discovery-only' configured. | 16 Oct |
| CVE-2026-101957 | 8.7 high | 1.0% | no CPE yet | An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause an rpd crash via an LLGR-stale route update readvertised to a configured non-LLGR peer group. | 15 Oct |
| CVE-2026-85443 | 8.7 high | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 contains a denial of service vulnerability in MOOSCommServer::ListenLoop() where the accept thread performs a blocking receive without timeout during the wire-protocol handshake. An attacker can open a TCP connection to the MOOSDB port and send no data, causing the accept thread to block indefinitely while holding the socket-list lock, preventing all subsequent client connections. | 14 Oct |
| CVE-2026-5367 | 8.6 high | 1.0% | no CPE yet | A flaw was found in OVN (Open Virtual Network). A remote attacker, by sending crafted DHCPv6 (Dynamic Host Configuration Protocol for IPv6) SOLICIT packets with an inflated Client ID length, could cause the ovn-controller to read beyond the bounds of a packet. This out-of-bounds read can lead to the disclosure of sensitive information stored in heap memory, which is then returned to the attacker's virtual machine port. | Mon 26 Oct |
| CVE-2026-20263 | 8.6 high | 1.0% | cisco, ios_xe | A vulnerability in the Blocks Extensible Exchange Protocol (BEEP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling when parsing a specific BEEP SOAP request. An attacker could exploit this vulnerability by sending a specific BEEP SOAP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. | 23 Oct |
| CVE-2026-80590 | 8.6 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged. | 19 Oct |
| CVE-2026-79882 | 8.3 high | 1.0% | no CPE yet | There is a command injection vulnerability in the PAPI protocol of AOS-10 that could lead to unauthenticated remote code execution by an adjacent attacker sending specially crafted packets. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. | Fri 30 Oct |
Download these 853 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.