Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-63077KEVexploit ×8 | 9.8 critical | 94.0% | jetbrains, teamcity | In JetBrains TeamCity before 2026.1.3, 2025.11.7 unauthenticated remote code execution was possible via the agent polling protocol | 24 Oct |
| CVE-2026-96652KEVexploit ×7 | 5.3 medium | 2.0% | plex, media_server | Plex Media Server before 1.43.3.10861 allows SSRF via '/player/timeline'. An attacker using any X-Plex-Token value can include a full URL in the 'protocol' parameter and force the Plex server to POST to the attacker's chosen destination. | 21 Oct |
| CVE-2026-7473KEVexploit | 6.9 medium | 1.0% | arista, eos | On affected platforms running Arista EOS where a tunnel decapsulation configuration—such as VXLAN (Virtual Extensible LAN), decap-groups, or a GRE (Generic Routing Encapsulation) tunnel interface—is present, the switch will incorrectly decapsulate and forward other unexpected tunneled packet with a destination IP matching its configured decapsulation IP. This occurs because the switch does not verify the tunnel protocol type, potentially leading to the unexpected processing of non-configured tunnel traffic. This issue has been reported as being exploited in the wild. | Sun 25 Oct |
| CVE-2013-4786exploit ×3 | 7.5 high | 98.0% | oracle, intel, fujitsu_m10_firmware, intelligent_platform_management_interface | The IPMI 2.0 specification supports RMCP+ Authenticated Key-Exchange Protocol (RAKP) authentication, which allows remote attackers to obtain password hashes and conduct offline password guessing attacks by obtaining the HMAC from a RAKP message 2 response from a BMC. | 9 Oct |
| CVE-2023-48795exploit ×5 | 5.9 medium | 94.0% | openbsd, putty, openssh, filezilla_client | The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in [email protected] and (if CBC is used) the [email protected] MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust. | 15 Oct |
| CVE-2011-3389exploit ×2 | 4.3 medium | 73.0% | google, microsoft, chrome, internet_explorer, firefox | The SSL protocol, as used in certain configurations in Microsoft Windows and Microsoft Internet Explorer, Mozilla Firefox, Google Chrome, Opera, and other products, encrypts data by using CBC mode with chained initialization vectors, which allows man-in-the-middle attackers to obtain plaintext HTTP headers via a blockwise chosen-boundary attack (BCBA) on an HTTPS session, in conjunction with JavaScript code that uses (1) the HTML5 WebSocket API, (2) the Java URLConnection API, or (3) the Silverlight WebClient API, aka a "BEAST" attack. | 9 Oct |
| CVE-2026-23918exploit ×16 | 8.8 high | 50.0% | apache, http_server | Double Free and possible RCE vulnerability in Apache HTTP Server with the HTTP/2 protocol. This issue affects Apache HTTP Server: 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue. | Mon 26 Oct |
| CVE-2024-3596exploit | 9.0 critical | 15.0% | freeradius, broadcom, brocade_sannav, fabric_operating_system | RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature. | 15 Oct |
| CVE-2026-33453exploit ×2 | 10.0 critical | 9.0% | apache, camel | Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component. Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec) The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy. Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all. As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process. The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration. Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0. Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue. | Mon 26 Oct |
| CVE-2023-3338exploit | 6.5 medium | 8.0% | linux, netapp, linux_kernel, active_iq_unified_manager, debian_linux | A null pointer dereference flaw was found in the Linux kernel's DECnet networking protocol. This issue could allow a remote user to crash the system. | 14 Oct |
| CVE-2024-5535exploit | 9.1 critical | 6.0% | no CPE yet | Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | 15 Oct |
| CVE-2026-61515exploit | 9.3 critical | 2.0% | no CPE yet | Puwell IP Camera firmware versions 2.x through 4.x contains an unauthenticated command injection vulnerability that allows remote attackers to execute arbitrary operating system commands by sending a crafted JSON payload to the DebugShell interface exposed on TCP port 34567. Attackers can exploit the lack of authentication and input sanitization in the binary protocol service to pass arbitrary commands directly to the underlying operating system, achieving root-level code execution and complete device compromise. | 23 Oct |
| CVE-2025-9784exploit | 7.5 high | 2.0% | redhat, build_of_apache_camel_for_spring_boot, fuse, jboss_enterprise_application_platform | A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). | 14 Oct |
| CVE-2026-6130exploit | 5.5 medium | 2.0% | no CPE yet | A flaw has been found in chatboxai chatbox up to 1.20.0. This impacts the function StdioClientTransport of the file src/main/mcp/ipc-stdio-transport.ts of the component Model Context Protocol Server Management System. Executing a manipulation of the argument args/env can lead to os command injection. The attack can be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | Mon 26 Oct |
| CVE-2026-118238exploit | unscored | 2.0% | tenda, w18e | The Tenda W18E web management server is vulnerable to OS command injection via the "diagnose" packet-capture feature due to improper validation of JSON fields. An authenticated user can inject shell metacharacters into the protocol or targetDevice fields, which are later concatenated into a tcpdump command and executed with root privileges. This vulnerability can be exploited without authentication if the device is in a factory-reset state. | Fri 30 Oct |
| CVE-2026-12940exploit | 9.8 critical | 1.0% | langflow | IBM Langflow OSS 1.0.0 through 1.10.1 are vulnerable to unauthenticated remote code execution via environment variable injection in the MCP (Model Context Protocol) stdio launcher. The vulnerability exists in src/lfx/src/lfx/base/mcp/util.py where the DANGEROUS_ENV_VARS blocklist fails to include SHELLOPTS , BASHOPTS , and PS4 environment variables. | 23 Oct |
| CVE-2026-57967exploit | 9.8 critical | 1.0% | apache, artemis | An unauthenticated remote attacker can craft a CORE protocol SESSION_REATTACH packet to steal an existing session and assume ongoing execution of the previously authenticated session. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue. | 9 Oct |
| CVE-2026-88900exploit | 8.8 high | 1.0% | no CPE yet | Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. | 20 Oct |
| CVE-2026-43865exploit | 8.1 high | 1.0% | apache, camel | Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component. The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. | Sun 25 Oct |
| CVE-2026-8023exploit | 7.5 high | 1.0% | zephyrproject, zephyr | Zephyr's HTTP server (subsys/net/lib/http) provides a static-filesystem resource type (HTTP_RESOURCE_TYPE_STATIC_FS, available when CONFIG_FILE_SYSTEM is enabled) that serves files from a configured root directory. Before this fix, both the HTTP/1 and HTTP/2 front-ends placed the raw, attacker-controlled request path into client->url_buffer (assembled in on_url() for HTTP/1 and copied verbatim from the :path pseudo-header for HTTP/2) without resolving ./.. segments. The static-FS handler then built the on-disk filename by directly concatenating the configured root with that raw URL (snprintk(fname, ..., "%s%s", static_fs_detail->fs_path, client->url_buffer) at http_server_http1.c:603 and http_server_http2.c:490) and opened it with fs_open(fname, FS_O_READ). Because the handler is reached via wildcard/leading-dir (fnmatch FNM_LEADING_DIR) or fallback resource matching, a request such as GET /<prefix>/../../<file> is dispatched to the handler and, after the underlying filesystem (e.g. LittleFS/FAT) resolves the .. segments, escapes the configured web root, letting an unauthenticated remote client read arbitrary readable files on the mounted volume (information disclosure). The HTTP server requires no TLS or authentication to reach this path. The fix adds http_server_remove_dot_segments(), which canonicalizes the path portion of the URL before resource lookup in both protocol handlers, neutralizing the traversal. Affects releases v4.0.0 through v4.4.0 for deployments that register a static-filesystem resource. | Sun 25 Oct |
| CVE-2026-85251exploit | 7.5 high | 1.0% | no CPE yet | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Two paths handed credentials to a redirect target, which is a host chosen by the remote server rather than by the route, once followRedirects=true. OAuth2ClientConfigurer registers its interceptor with addRequestInterceptorFirst, and HttpClient runs protocol-level request interceptors inside ProtocolExec, which sits below RedirectExec in the exec chain; the interceptor therefore ran again for every redirect hop and re-attached Authorization: Bearer to whatever host the Location header named. Separately, credentials were registered against an AuthScope matching any host, so basic and digest credentials were presented to a redirect target as well. A remote endpoint - or anyone who can influence its responses - could therefore collect the bearer token or the configured credentials simply by answering with a redirect to a host it controls. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Credentials are now sent only to the authority the endpoint was configured with, and are not re-attached when a redirect crosses to another host. For deployments that cannot upgrade immediately, set followRedirects=false on endpoints that carry credentials, and handle any redirect explicitly in the route so that the destination is chosen by the route rather than by the remote server. | 19 Oct |
| CVE-2025-13380exploit | 6.5 medium | 1.0% | no CPE yet | The AI Engine for WordPress: ChatGPT, GPT Content Generator plugin for WordPress is vulnerable to Arbitrary File Read in all versions up to, and including, 1.0.1. This is due to insufficient validation of user-supplied file paths in the 'lqdai_update_post' AJAX endpoint and the use of file_get_contents() with user-controlled URLs without protocol restrictions in the insert_image() function. This makes it possible for authenticated attackers, with Contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. | 18 Oct |
| CVE-2026-23003exploit | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 | 19 Oct |
| CVE-2025-64702exploit | 5.3 medium | 1.0% | quic-go_project, quic-go | quic-go is an implementation of the QUIC protocol in Go. Versions 0.56.0 and below are vulnerable to excessive memory allocation through quic-go's HTTP/3 client and server implementations by sending a QPACK-encoded HEADERS frame that decodes into a large header field section (many unique header names and/or large values). The implementation builds an http.Header (used on the http.Request and http.Response, respectively), while only enforcing limits on the size of the (QPACK-compressed) HEADERS frame, but not on the decoded header, leading to memory exhaustion. This issue is fixed in version 0.57.0. | 14 Oct |
| CVE-2026-46584exploit | 3.7 low | 1.0% | apache, camel | Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input. | Sun 25 Oct |
| CVE-2026-17351exploit | 9.4 critical | 0.00% | pgadmin, pgadmin_4 | The fix for CVE-2026-12045 in pgAdmin 4 9.16 required the LLM-supplied query passed to the AI Assistant's execute_sql_query tool to parse, via sqlparse, as exactly one non-transaction-control statement before running it inside a BEGIN TRANSACTION READ ONLY wrapper. sqlparse's string-literal lexing can disagree with PostgreSQL's own parser: under standard_conforming_strings = on (PostgreSQL's default since 9.1), a backslash immediately before a quote is an ordinary character to PostgreSQL, but sqlparse treats it as escaping the quote. A payload such as SELECT '\';COMMIT;CREATE TABLE pwn(x int);SELECT 1 --' therefore parses as a single SELECT to sqlparse's validator, while PostgreSQL executes it as four statements: the smuggled COMMIT ends the wrapping read-only transaction, and the trailing ROLLBACK becomes a no-op. This reintroduces the same write/RCE bypass CVE-2026-12045 was meant to close, reachable via the same indirect prompt-injection delivery (an attacker plants the payload in any object the AI Assistant may read; the LLM emits it as a tool call). An initial candidate fix ran the query with psycopg's execute(..., prepare=True), intending to force PostgreSQL's own Parse step (extended query protocol) to reject multi-statement text regardless of sqlparse's classification. This candidate fix does not work as submitted: psycopg3's PrepareManager silently ignores the prepare argument whenever the connection's prepare_threshold is None, which is pgAdmin's default for every server connection (the per-server "Prepare threshold" field is blank unless an administrator explicitly sets it) -- psycopg3 falls back to the simple query protocol, the same multi-statement-capable path the bypass exploits, so the candidate fix closes nothing on any real-world default configuration. The corrected fix sets conn.prepare_threshold = 0 directly on the dedicated, single-use read-only connection the AI Assistant tool opens, structurally forcing the extended query protocol independent of any server-level configuration. Verified against a live PostgreSQL 18 instance: the payload executes successfully under the prepare_threshold=None (default) behavior, and is rejected with "cannot insert multiple commands into a prepared statement" once prepare_threshold=0 is set on that connection. This issue affects pgAdmin 4: from 9.13 before 9.17. | 23 Oct |
| CVE-2026-77812exploit | 9.4 critical | 0.00% | no CPE yet | DJI drones transmit DUML (DJI Universal Markup Language) protocol messages over BLE (Bluetooth Low Energy) without encryption. When a client attempts to connect to the drone over Wi-Fi, or when the drone is switched to QuickTransfer mode, the DJI Fly application exchanges DUML messages with the drone over BLE, including the Wi-Fi credentials. An attacker within BLE range can passively sniff this traffic and recover the credentials in cleartext, including the drone's Wi-Fi PSK, SSID, and trusted identifier UUID. Obtaining these credentials allows the attacker to join the drone's internal Wi-Fi network, interact with network services exposed by the drone, and decrypt Wi-Fi traffic exchanged between the drone and the legitimate user. * An attacker within BLE range recovers the Wi-Fi SSID and PSK in cleartext, and can then join the drone's network * The same capture also exposes the session UUID identifier, which is the only thing the drone uses to tell a trusted client from an unknown one, so the attacker can replay it and skip the physical confirmation of new connected devices. * The credentials do not change between sessions unless the operator manually resets the Wi-Fi settings, so one capture stays valid indefinitely * The attack is fully passive, with nothing transmitted and no connection made, so neither the operator nor the drone has any indication the session was observed * A BLE sniffer and presence during one normal DJI Fly connection are needed Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600. Remediation requires a firmware update from the vendor. There is no user-side mitigation that fully addresses the vulnerability without upgrading. | 15 Oct |
| CVE-2026-42559exploit | 8.8 high | 0.00% | no CPE yet | RMCP is an official Rust SDK for the Model Context Protocol. Prior to version 1.4.0, the rmcp crate's Streamable HTTP server transport (crates/rmcp/src/transport/streamable_http_server/) did not validate the incoming Host header. This allowed a malicious public website, via a DNS rebinding attack, to send authenticated requests to an MCP server running on the victim's loopback or private-network interface. This vulnerability is fixed in 1.4.0. | Mon 26 Oct |
| CVE-2026-8069exploit | 8.5 high | 0.00% | acer, nitrosense, predatorsense | PredatorSense version 3.00.3136 to 3.00.3196 contain Local Privilege Escalation (LPE) vulnerability.The program exposes a Windows Named Pipe that uses a custom protocol to invoke internal functions. However, this Named Pipe is misconfigured, allowing any authenticated local user to execute arbitrary code with NT AUTHORITY\SYSTEM privileges and to delete arbitrary files with SYSTEM privileges. By leveraging this, an attacker can execute arbitrary code on the target system with elevated privileges. | Mon 26 Oct |
| CVE-2026-80344exploit | 8.2 high | 0.00% | no CPE yet | Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. | 19 Oct |
| CVE-2026-33980exploit | 8.1 high | 0.00% | pab1it0, azure_data_explorer_mcp_server | Azure Data Explorer MCP Server is a Model Context Protocol (MCP) server that enables AI assistants to execute KQL queries and explore Azure Data Explorer (ADX/Kusto) databases through standardized interfaces. Versions up to and including 0.1.1 contain KQL (Kusto Query Language) injection vulnerabilities in three MCP tool handlers: `get_table_schema`, `sample_table_data`, and `get_table_details`. The `table_name` parameter is interpolated directly into KQL queries via f-strings without any validation or sanitization, allowing an attacker (or a prompt-injected AI agent) to execute arbitrary KQL queries against the Azure Data Explorer cluster. Commit 0abe0ee55279e111281076393e5e966335fffd30 patches the issue. | Mon 26 Oct |
| CVE-2026-52910exploit ×2 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated--- | 19 Oct |
| CVE-2026-46275exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. | 19 Oct |
| CVE-2026-81000exploit ×4 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and when choosing how much packet data to keep linear. OVS can propagate an oversized headroom request from another port to TUN or TAP. When align is larger than the usable space in a one-page skb head, SKB_MAX_HEAD(align) underflows and the result becomes negative when stored in good_linear. That value later wraps when assigned to the size_t linear variable, and tun_alloc_skb() can place skb->data outside the allocated head. Bound the headroom stored by TUN to the one-page skb-head budget and the largest non-sentinel 16-bit skb header offset. Leave one linear byte for raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN. Also pull the raw-TUN protocol byte and the TAP Ethernet header before accessing them, so these checks remain safe for nonlinear skbs supplied by other allocation paths. | 19 Oct |
| CVE-2026-15469exploit | 7.7 high | 0.00% | no CPE yet | The use of hard-coded cryptographic key vulnerability has been identified in the mesh functionality of Deco XE75 v3, XE5300 v3.6 and WE10800 v3.6. A shared RSA-512 mesh group private key is present in the affected firmware and is used by the mesh protocol for node authentication. An attacker who obtains the firmware image and has local network access may be able to authenticate as a mesh node without possessing a device-specific credential. Successful exploitation may allow an unauthenticated adjacent attacker to impersonate a trusted mesh node and bypass mesh node authentication, which may permit unauthorized changes to device or mesh configuration, affecting confidentiality, integrity and availability. | 12 Oct |
| CVE-2025-63895exploit | 7.5 high | 0.00% | jxlindia, jxl_9_inch_car_android_double_din_player_firmware | An issue in the Bluetooth firmware of JXL 9 Inch Car Android Double Din Player Android v12.0 allows attackers to cause a Denial of Service (DoS) via sending a crafted Link Manager Protocol (LMP) packet. | Tue 27 Oct |
| CVE-2026-53587exploit | 7.5 high | 0.00% | no CPE yet | libgit2 is a portable C implementation of the Git core methods provided as a linkable library with a solid API, allowing to build Git functionality into your application. Prior to 1.8.6 and 1.9.5, libgit2 performs a fixed-size strncmp in set_data in src/libgit2/transports/smart_pkt.c without first verifying that the smart-protocol pkt-line capability buffer contains 14 bytes. A malicious Git server can make bytes after the pkt-line complete object-format=, causing format_str to advance beyond the pkt-line and the following memchr length calculation to underflow. The resulting heap out-of-bounds walk can crash a client during the first refs-advertisement packet over HTTP, HTTPS, SSH, or the Git protocol. This issue is fixed in versions 1.8.6 and 1.9.5. | Mon 26 Oct |
| CVE-2023-30367exploit | 7.5 high | 0.00% | mremoteng | Multi-Remote Next Generation Connection Manager (mRemoteNG) is free software that enables users to store and manage multi-protocol connection configurations to remotely connect to systems. mRemoteNG configuration files can be stored in an encrypted state on disk. mRemoteNG version <= v1.76.20 and <= 1.77.3-dev loads configuration files in plain text into memory (after decrypting them if necessary) at application start-up, even if no connection has been established yet. This allows attackers to access contents of configuration files in plain text through a memory dump and thus compromise user credentials when no custom password encryption key has been set. This also bypasses the connection configuration file encryption setting by dumping already decrypted configurations from memory. | 23 Oct |
| CVE-2026-58249exploit | 7.5 high | 0.00% | no CPE yet | SAP NetWeaver and SAP Web Dispatcher do not properly validate certain fields in specially crafted requests handled by an internal protocol component. An unauthenticated attacker could send a malicious request that triggers a memory-handling error, causing the affected process to crash. Successful exploitation can therefore result in a high impact on the availability of the affected application. There is no impact on the confidentiality or integrity of the application. | 15 Oct |
| CVE-2026-110912exploit ×3 | 7.1 high | 0.00% | no CPE yet | In DragonFly BSD through 6.4.2 before 4bb22ff, the ARP input handlers arpintr() and in_arpinput() (sys/netinet/if_ether.c) do not validate the hardware address length (ar_hln) and protocol address length (ar_pln) fields of incoming ARP packets. in_arpreply() then uses these attacker-controlled values as memcpy lengths when copying from kernel buffers that are only 6 and 4 bytes long, resulting in an out-of-bounds read of kernel heap and stack memory that is copied into the ARP reply sent back to the requester. An unauthenticated attacker on the adjacent network can use a single crafted ARP request to disclose up to roughly 250 bytes of each type of kernel memory, including kernel pointers. This is expected to be fixed in the 6.6 stable release when that is available. | 16 Oct |
| CVE-2026-85249exploit | 6.5 medium | 0.00% | no CPE yet | Improper Input Validation vulnerability in Apache Camel Tika component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Tika producer mapped every metadata key parsed out of the submitted document onto the Exchange as a header, with no filter applied. Document metadata is attacker-controlled content: the party that supplies the file chooses the metadata keys it carries. A crafted document could therefore set Exchange headers that the rest of the route depends on, including headers in the Camel namespace such as CamelFileName, which downstream components use to decide where content is written. The pattern is the same header-injection class as the consumer advisories published previously, reached here through parsed file content rather than through a protocol header. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Parsed document metadata is now filtered through a HeaderFilterStrategy before it is mapped onto the Exchange. A route that was reading a metadata-derived header the filter now blocks will see it missing. For deployments that cannot upgrade immediately, strip the Camel namespace after the Tika producer with removeHeaders("Camel*") before any component that acts on those headers. | 19 Oct |
| CVE-2026-85254exploit | 6.5 medium | 0.00% | no CPE yet | Improper Handling of Case Sensitivity vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The guard that prevents a request header being reflected into the response compared header names case sensitively, while HTTP header names are case insensitive. A caller could therefore defeat the suppression simply by varying the case of the header name. HTTP/2 makes the problem unconditional rather than optional: the protocol requires header names to be lowercase on the wire, so the comparison never matched and the suppression was inert for every request on an HTTP/2 connection. The consequence is that content the caller chose is echoed back in the response, which is the basis for response-splitting and cache-poisoning style attacks against whatever sits in front of the Camel endpoint. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Request header names are now compared case insensitively, so the suppression holds regardless of casing and works under HTTP/2. For deployments that cannot upgrade immediately, strip the headers in question in front of the Camel endpoint, or remove them from the response in the route rather than relying on the built-in suppression. | 19 Oct |
| CVE-2026-69243exploit | 6.3 medium | 0.00% | no CPE yet | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.2, the HTTP parsers were vulnerable to a request smuggling attack relating to WebSocket upgrades. If using the server-side component, an attacker may be able to execute a request smuggling vulnerability using an edge case in the WebSocket upgrade procedure. A WebSocket upgrade request with a body could cause the parser to switch protocols before the complete request body was received, leaving trailing bytes to be handled as upgraded-protocol or pipelined data rather than normal HTTP body data. This issue is fixed in version 3.14.2. | 23 Oct |
| CVE-2026-23398exploit ×2 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: icmp: fix NULL pointer dereference in icmp_tag_validation() icmp_tag_validation() unconditionally dereferences the result of rcu_dereference(inet_protos[proto]) without checking for NULL. The inet_protos[] array is sparse -- only about 15 of 256 protocol numbers have registered handlers. When ip_no_pmtu_disc is set to 3 (hardened PMTU mode) and the kernel receives an ICMP Fragmentation Needed error with a quoted inner IP header containing an unregistered protocol number, the NULL dereference causes a kernel panic in softirq context. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143) Call Trace: <IRQ> icmp_rcv (net/ipv4/icmp.c:1527) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207) ip_local_deliver_finish (net/ipv4/ip_input.c:242) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) __netif_receive_skb_one_core (net/core/dev.c:6164) process_backlog (net/core/dev.c:6628) handle_softirqs (kernel/softirq.c:561) </IRQ> Add a NULL check before accessing icmp_strict_tag_validation. If the protocol has no registered handler, return false since it cannot perform strict tag validation. | 15 Oct |
| CVE-2026-9794exploit | 5.3 medium | 0.00% | redhat, build_of_keycloak | A flaw was found in Keycloak. A remote, unauthenticated attacker can exploit this vulnerability by sending specially crafted SOAP requests to the SAML ECP (Security Assertion Markup Language Enhanced Client or Proxy) endpoint with varying client IDs. By observing distinct faultstrings in the responses, the attacker can determine the client's protocol type, leading to information disclosure. | Mon 26 Oct |
| CVE-2026-71554exploit | 5.3 medium | 0.00% | no CPE yet | h2 is a pure-Python implementation of a HTTP/2 protocol stack. Versions up to and including 4.4.0 accept request header blocks containing more than one Host header, and forward every Host header to the consuming application. Where the consumer downgrades HTTP/2 to HTTP/1.1, the resulting request carries two Host header lines, providing a request smuggling primitive. This issue is fixed in version 4.4.1. | 24 Oct |
| CVE-2024-28182 | 5.3 medium | 85.0% | nghttp2, debian, debian_linux, fedora | nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. | 15 Oct |
| CVE-2020-13943 | 4.3 medium | 53.0% | apache, debian, tomcat, debian_linux, instantis_enterprisetrack | If an HTTP/2 client connecting to Apache Tomcat 10.0.0-M1 to 10.0.0-M7, 9.0.0.M1 to 9.0.37 or 8.5.0 to 8.5.57 exceeded the agreed maximum number of concurrent streams for a connection (in violation of the HTTP/2 protocol), it was possible that a subsequent request made on that connection could contain HTTP headers - including HTTP/2 pseudo headers - from a previous request rather than the intended headers. This could lead to users seeing responses for unexpected resources. | 8 Oct |
| CVE-2021-21295 | 5.9 medium | 19.0% | netty, netapp, oncommand_api_services, oncommand_workflow_automation | Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty (io.netty:netty-codec-http2) before version 4.1.60.Final there is a vulnerability that enables request smuggling. If a Content-Length header is present in the original HTTP/2 request, the field is not validated by `Http2MultiplexHandler` as it is propagated up. This is fine as long as the request is not proxied through as HTTP/1.1. If the request comes in as an HTTP/2 stream, gets converted into the HTTP/1.1 domain objects (`HttpRequest`, `HttpContent`, etc.) via `Http2StreamFrameToHttpObjectCodec `and then sent up to the child channel's pipeline and proxied through a remote peer as HTTP/1.1 this may result in request smuggling. In a proxy case, users may assume the content-length is validated somehow, which is not the case. If the request is forwarded to a backend channel that is a HTTP/1.1 connection, the Content-Length now has meaning and needs to be checked. An attacker can smuggle requests inside the body as it gets downgraded from HTTP/2 to HTTP/1.1. For an example attack refer to the linked GitHub Advisory. Users are only affected if all of this is true: `HTTP2MultiplexCodec` or `Http2FrameCodec` is used, `Http2StreamFrameToHttpObjectCodec` is used to convert to HTTP/1.1 objects, and these HTTP/1.1 objects are forwarded to another remote peer. This has been patched in 4.1.60.Final As a workaround, the user can do the validation by themselves by implementing a custom `ChannelInboundHandler` that is put in the `ChannelPipeline` behind `Http2StreamFrameToHttpObjectCodec`. | 8 Oct |
| CVE-2019-5482 | 9.8 critical | 18.0% | haxx, fedoraproject, curl, fedora, leap | Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3. | 14 Oct |
50 of 841 · Next
Download these 841 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.