Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-56416 | 4.8 medium | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound up to and including version 1.25.1, when the validator builds the canonical RDATA form for an RRSIG-covered PX/RP/MINFO/SOA RRset, it computes the address of the second embedded domain name as 'datstart + dname_valid(datstart, ...)' and passes it straight to 'query_dname_tolower()' without checking that a second name is actually present in the RDATA. The wire-format parser accepts multi-dname RRs whose RDATA ends after the first name, so an attacker who runs a DNSSEC-signed authoritative server can deliver a record with an absent second domain name (e.g. SOA record) and cause 'query_dname_tolower()' to walk label-by-label through stale bytes in the per-worker 'env->scratch_buffer', past the end of that heap allocation if 'msg-buffer-size' has been lowered from the default. This leads to heap buffer overflow and on a release build the outcome relies heavily on the contents of the buffer tail and the adjacent heap chunk. | Sat 24 Oct |
| CVE-2026-49820 | 4.7 medium | 0.00% | no CPE yet | Probo is a self-hostable governance, risk, and compliance (GRC) platform built for engineering and security teams. Probo's `saferedirect` package validates redirect URLs used across authentication flows (OIDC, SAML, session transfer, OAuth connectors, and trust-center magic links). Prior to version 0.19.3.1, the validator only inspected the second character of relative paths, so a URL like `/../\evil.com` passed validation because the second character is `.`. Go's `http.Redirect` normalizes this path to `/\evil.com` before setting the `Location` header. Browsers can interpret the backslash as a host separator and redirect the user to an external domain (`https://evil.com`), bypassing the intended same-origin restriction. This enables open-redirect phishing: an attacker can craft a `continue` parameter (or embed a malicious URL in a session-transfer token) that appears to originate from a trusted Probo domain but redirects victims elsewhere. This is fixed in `go.probo.inc/probo` 0.193.1 by normalizing relative paths with `path.Clean` before validation, rejecting backslashes (including percent-encoded `%5c`) anywhere in the path, and re-checking the normalized result for protocol-relative and backslash prefixes. Self-hosted deployments should upgrade to probod v0.194.1 or later. SaaS deployments on getprobo.com are patched. No practical workaround is available for self-hosted installations. | Sat 24 Oct |
| CVE-2026-7007 | 4.6 medium | 0.00% | zephyrproject, zephyr | The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization. During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence. An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor. The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs. | Sat 24 Oct |
| CVE-2026-35501 | 3.7 low | 0.00% | no CPE yet | When NLnet Labs Unbound 1.0.1 up to and including version 1.26.1 is configured with both a root trust anchor and an additional 'trust-anchor:' for an island-of-security zone whose parent is provably insecure under the root chain, a malicious actor with a forged NSEC reply with the SOA bit cleared can trick Unbound to treat the configured trust island as insecure. This happens because the DNSSEC validator in Unbound accepts and caches the NSEC insecure response bypassing the RRSIG validation that the validator was supposed to do. The acceptance of the NSEC record at the trust anchor apex was allowed due to and old fix for type DS and NSEC queries from clients when trust anchor for that name existed. | 11 h ago |
| CVE-2026-119125 | 2.3 low | — | parse-community, parse-server | Parse Server before 8.6.107 and 9.0.0 before 9.10.5-alpha.8 returns the stored value of a field reverted by a beforeSave trigger in object update responses, even to clients without read access to that object or field. An authenticated client able to update an object whose beforeSave trigger reverts a field, via revert() or a constant: true validator, can read protected values, including its own account's raw MFA authData when protectedFieldsTriggerExempt is enabled. | 13 h ago |
| CVE-2026-108821 | 2.1 low | 0.00% | no CPE yet | A security vulnerability has been detected in Tencent WeKnora up to 0.8.1. Impacted is the function validateSubquery of the file internal/utils/inject.go of the component SQL Validator. The manipulation leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.8.2 is recommended to address this issue. The identifier of the patch is d7ccd5ba517cc3968e6d5000a2ab0f4b51ef1dda. It is recommended to upgrade the affected component. | 13 Oct |
| CVE-2026-15528 | 1.9 low | 0.00% | no CPE yet | A vulnerability was found in lamaalrajih kicad-mcp up to 3.3.1. This issue affects some unknown processing of the file kicad_mcp/utils/path_validator.py. Performing a manipulation of the argument project_path/schematic_path results in protection mechanism failure. Attacking locally is a requirement. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. | Sat 24 Oct |
| CVE-2023-54404 | unscored | 0.00% | no CPE yet | This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. The described memory use only grows in proportion to input already allocated by JSON.parse before Zod runs, is reachable only without an application request-size limit, and reflects expected validator behavior rather than a defect in Zod. | Wed 28 Oct |
| CVE-2026-110985 | unscored | 0.00% | no CPE yet | A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set. Impact: A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all. Mitigation (all affected versions, no upgrade required): Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class. Resolution: From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). | Wed 28 Oct |
| CVE-2026-110952 | unscored | 0.00% | no CPE yet | A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured: - The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it. - An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is still rejected when no expected audience is configured.) Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0). Impact: The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the signature is validated and only the issuer/audience checks are not enforced by default. Mitigation (all affected versions, no upgrade required): Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0. Resolution: - From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. | Wed 28 Oct |
| CVE-2026-86147 | unscored | 0.00% | no CPE yet | External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time. Root Cause: 1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory. 2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time. Affected Scenarios: Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3523 Note: After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner. | Mon 26 Oct |
| CVE-2026-98702 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read. | 19 Oct |
| CVE-2026-89776 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: enforce exact length of GROUP/GROUP6 attributes The VXLAN VNI filter entry policy declares the GROUP/GROUP6 address attributes as NLA_BINARY with only a maximum length, so validate_nla() accepts a payload shorter than the address. The GROUP consumer reads it with nla_get_in_addr(), an unconditional 4-byte load, so a short attribute over-reads up to 3 bytes of uninitialised slab data, which are stored into remote_ip and echoed back via RTM_GETTUNNEL, disclosing kernel memory. Switch both entries to NLA_POLICY_EXACT_LEN() so the validator rejects any GROUP/GROUP6 that is not exactly 4 / 16 bytes; a valid address is always sent at full width. | 19 Oct |
113 of 113 · Previous
Download these 113 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.