Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-20182KEVexploit ×4 | 10.0 critical | 92.0% | cisco, catalyst_sd-wan_manager, sd-wan_vbond_orchestrator, sd-wan_vsmart_controller | May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks. A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. | Mon 26 Oct |
| CVE-2025-59934exploit | 9.4 critical | 9.0% | no CPE yet | Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. | 19 Oct |
| CVE-2026-53753exploit ×2 | 10.0 critical | 3.0% | kidocode, crawl4ai | Crawl4AI is an open-source LLM friendly web crawler & scraper. Prior to 0.8.7, the _safe_eval_expression() function in the computed fields feature uses an AST validator that only blocks attributes starting with underscore. Python generator and frame object attributes (gi_frame, f_back, f_builtins) do NOT start with underscore, enabling a complete sandbox escape to achieve arbitrary code execution. The attack requires no authentication (JWT disabled by default) and is triggered via POST /crawl with a crafted extraction schema. This vulnerability is fixed in 0.8.7. | Sun 25 Oct |
| CVE-2019-10219exploit ×2 | 6.1 medium | 2.0% | redhat, netapp, hibernate_validator, fuse, jboss_data_grid | A vulnerability was found in Hibernate-Validator. The SafeHtml validator annotation fails to properly sanitize payloads consisting of potentially malicious code in HTML comments and instructions. This vulnerability can result in an XSS attack. | 8 Oct |
| CVE-2025-12758exploit | 7.7 high | 1.0% | validator_project, validator | Versions of the package validator before 13.15.22 are vulnerable to Incomplete Filtering of One or More Instances of Special Elements in the isLength() function that does not take into account Unicode variation selectors (\uFE0F, \uFE0E) appearing in a sequence which lead to improper string length calculation. This can lead to an application using isLength for input validation accepting strings significantly longer than intended, resulting in issues like data truncation in databases, buffer overflows in other system components, or denial-of-service. | 19 Oct |
| CVE-2026-17351exploit | 9.4 critical | 0.00% | pgadmin, pgadmin_4 | The fix for CVE-2026-12045 in pgAdmin 4 9.16 required the LLM-supplied query passed to the AI Assistant's execute_sql_query tool to parse, via sqlparse, as exactly one non-transaction-control statement before running it inside a BEGIN TRANSACTION READ ONLY wrapper. sqlparse's string-literal lexing can disagree with PostgreSQL's own parser: under standard_conforming_strings = on (PostgreSQL's default since 9.1), a backslash immediately before a quote is an ordinary character to PostgreSQL, but sqlparse treats it as escaping the quote. A payload such as SELECT '\';COMMIT;CREATE TABLE pwn(x int);SELECT 1 --' therefore parses as a single SELECT to sqlparse's validator, while PostgreSQL executes it as four statements: the smuggled COMMIT ends the wrapping read-only transaction, and the trailing ROLLBACK becomes a no-op. This reintroduces the same write/RCE bypass CVE-2026-12045 was meant to close, reachable via the same indirect prompt-injection delivery (an attacker plants the payload in any object the AI Assistant may read; the LLM emits it as a tool call). An initial candidate fix ran the query with psycopg's execute(..., prepare=True), intending to force PostgreSQL's own Parse step (extended query protocol) to reject multi-statement text regardless of sqlparse's classification. This candidate fix does not work as submitted: psycopg3's PrepareManager silently ignores the prepare argument whenever the connection's prepare_threshold is None, which is pgAdmin's default for every server connection (the per-server "Prepare threshold" field is blank unless an administrator explicitly sets it) -- psycopg3 falls back to the simple query protocol, the same multi-statement-capable path the bypass exploits, so the candidate fix closes nothing on any real-world default configuration. The corrected fix sets conn.prepare_threshold = 0 directly on the dedicated, single-use read-only connection the AI Assistant tool opens, structurally forcing the extended query protocol independent of any server-level configuration. Verified against a live PostgreSQL 18 instance: the payload executes successfully under the prepare_threshold=None (default) behavior, and is rejected with "cannot insert multiple commands into a prepared statement" once prepare_threshold=0 is set on that connection. This issue affects pgAdmin 4: from 9.13 before 9.17. | Fri 23 Oct |
| CVE-2026-75898exploit | 8.4 high | 0.00% | no CPE yet | RAGFlow before 0.26.3 contains a server-side request forgery vulnerability in the agent workflow "Invoke" component (agent/component/invoke.py). The component builds an outbound request URL from canvas configuration and runtime template variables and passes it to requests.get, requests.post, or requests.put without calling the shared assert_url_is_safe validator or pinning the resolved address, unlike the crawler, SearXNG, file-upload, and RSS fetch paths. A user who can create or trigger an agent can direct the server to fetch loopback, link-local, and RFC 1918 destinations, including cloud instance metadata endpoints and services co-located on the deployment network, and the response body is returned as the component output. Where an agent is configured to interpolate the chat query into the Invoke URL, the destination is chosen by whoever can send that query. | 22 Oct |
| CVE-2016-1182 | 8.2 high | 26.0% | apache, struts | ActionServlet.java in Apache Struts 1 1.x through 1.3.10 does not properly restrict the Validator configuration, which allows remote attackers to conduct cross-site scripting (XSS) attacks or cause a denial of service via crafted input, a related issue to CVE-2015-0899. | 15 Oct |
| CVE-2026-110879 | 9.8 critical | 1.0% | no CPE yet | jackson-databind validates the outer class of a class-name type ID but accepts attacker-selected classes inside its generic arguments, even when those classes violate the declared type or would be rejected as direct type IDs. This bypasses the generic-argument validation added for CVE-2026-54512 (GHSA-j3rv-43j4-c7qm), of which this is an incomplete fix. DatabindContext._resolveAndValidateGeneric() checks the outer class against the declared base type and then passes each argument from the type ID to _validateTypeParameter(), which validates the argument against the outer base type rather than enforcing its corresponding declared generic binding. It also invokes validators with arguments that have not passed the subtype check those validators expect. Under the default DefaultBaseTypeLimitingValidator this accepts an unrelated class inside a generic subtype even when the same class is rejected as a direct type ID. Where an allowIfBaseType(...) rule approves the outer type, Jackson substitutes LaissezFaireSubTypeValidator, so the configured validator no longer restricts the embedded arguments. The element type of a plain array type ID such as [Lpkg.Gadget; is likewise left unvalidated once the array's base type is approved. Affected paths include annotation-based class-name polymorphism with a default Jackson 3.x JsonMapper, configured default typing in both Jackson 2.x and 3.x, and integrations that expose that default typing. The default-validator case requires no application-authored validator: with @JsonTypeInfo(use = Id.CLASS), a direct gadget type ID is rejected as "Not a subtype", while a type ID naming a generic wrapper around the same gadget is accepted and deserialized, including attacker-supplied bean properties. Where class-name default typing permits Map, a property declared as Map<String,String> accepts HashMap<FileSystemXmlApplicationContext,String>; map-key discovery then passes the attacker-controlled JSON property name to the selected class's one-string constructor. With Spring on the classpath and attacker-controlled XML the application can load, that constructor loads the XML and invokes ProcessBuilder.start() under the application account, giving arbitrary command execution. This issue affects com.fasterxml.jackson.core:jackson-databind from 2.10.0 and tools.jackson.core:jackson-databind from 3.0.0. Releases before 2.10.0 are not affected, because PolymorphicTypeValidator was introduced in jackson-databind 2.10.0. | Wed 28 Oct |
| CVE-2026-59144 | 9.8 critical | 1.0% | no CPE yet | Data::RingBuffer::Shared versions before 0.04 for Perl allow a stack buffer overflow via an unvalidated elem_size in ring_read_seq. The attach-time validator ring_validate_header checks the capacity-overflow and total_size consistency of the header but never caps elem_size against the destination size. ring_read_seq does memcpy(out, ring_slot(h, seq), elem_size) with elem_size read raw from the mmap'd segment, copying into a fixed 8-byte destination scalar. An elem_size larger than 8 bytes writes past the destination. A local peer that can write the backing file can leave the header valid while setting a large elem_size, so the next read copies a file-controlled length into the fixed 8-byte stack buffer, corrupting adjacent stack frames. | Sat 24 Oct |
| CVE-2026-59147 | 9.8 critical | 1.0% | no CPE yet | Data::DisjointSet::Shared versions before 0.02 for Perl allow out-of-bounds reads and writes via an unvalidated parent index in dsu_find. The attach-time validator dsu_validate_header checks the header scalars and region layout against the file size, but does not validate the array contents it then trusts. dsu_find walks and path-compresses parent[x] with x a raw file-stored index never bounded against the node count, so both the read and the compression write-back land out of bounds. A local peer that can write the backing file can leave the header valid while poisoning the parent array, so the next find or union both reads and writes through an out-of-bounds parent index, corrupting memory or crashing the process. | Sat 24 Oct |
| CVE-2026-89492 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate directory-index entry counts when reading metadata ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted. Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array. de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image. Found by 0sec automated security-research tooling (https://0sec.ai). | 21 Oct |
| CVE-2026-89611 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: validate non-resident attribute offsets ntfs_attr_update_meta() shifts the attribute name when converting between non-sparse and sparse attributes. Converting to sparse also adds the compressed_size field before the name and mapping pairs, requiring eight additional bytes in the attribute record. However, the validator does not check that name_offset is within safe boundaries for these operations or that the additional space is available. A malicious MFT record could set name_offset such that: 1. The name is positioned at the very end of a non-sparse attribute. Converting to sparse would shift the name forward by 8 bytes, writing beyond the attribute boundary. 2. The name overlaps with the mapping pairs, causing corruption during conversion. Add validation to ensure: - For named attributes, name_offset is within valid bounds - Name does not extend beyond the attribute or overlap with mapping pairs - For non-sparse, non-compressed attributes, eight bytes are available after mapping_pairs_offset for the compressed_size field The space check also covers unnamed attributes, for which name_offset = 0 is valid and no name range needs to be checked. | 19 Oct |
| CVE-2026-70470 | 9.5 critical | 1.0% | flowiseai, flowise | Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, Flowise validatePythonCodeForDataFrame in packages/components/src/pythonCodeValidator.ts can be bypassed with Unicode homoglyph identifiers, allowing arbitrary Python execution inside Pyodide and full OS command execution on the Flowise host via Pyodide js module interop. The validator gates pyodide.runPythonAsync in packages/components/nodes/agents/CSVAgent/CSVAgent.ts and packages/components/nodes/agents/AirtableAgent/AirtableAgent.ts with an ASCII word-boundary blacklist. JavaScript regex word boundaries are ASCII-only, while Python 3 NFKC-normalizes identifiers at parse time, so homoglyph forms such as __cl𝐚ss__, __subcl𝐚sses__, __b𝐚se__, and __b𝐮iltins__ bypass the blacklist and are parsed as their ASCII equivalents. This issue is fixed in version 3.1.3. | Sat 24 Oct |
| CVE-2026-70477 | 9.5 critical | 1.0% | flowiseai, flowise | Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, a prompt injection sent to a chatflow using a CSV Agent node can cause the LLM to respond with a malicious Python script that bypasses the blocklist validator and executes in an unsandboxed Pyodide environment. The specific flaw exists within the run method of the CSV_Agents class, where untrusted data is used to construct an LLM prompt and the resulting pythonCode is validated by validatePythonCodeForDataFrame before execution. An attacker can leverage this to execute arbitrary code in the context of the service account. This issue is fixed in 3.1.3. | Sat 24 Oct |
| CVE-2026-69264 | 9.4 critical | 1.0% | flowiseai, flowise | Prior to 3.1.3, Flowise CSVAgent interpolates an attacker-controlled segment of the csvFile data URI directly into a Python source-code template that is then executed by Pyodide. Because Pyodide is loaded with the default js bridge to globalThis, which on Node.js exposes eval and dynamic import, the attacker can break out of the Python string literal, hand a JavaScript string to js.eval, dynamically import Node built-in modules such as fs and child_process, and execute arbitrary file I/O or OS commands as the Flowise process. The two validator paths around this code, validatePythonCodeForDataFrame and validateCustomReadCSVFunction, are never applied to the bootstrap template. A workspace user with chatflows:create or agentflows/chatflows update permission can plant a CSV Agent node with a crafted csvFile; once the chatflow is exposed via POST /api/v1/prediction/:id, any unauthenticated request triggers host remote code execution. This issue is fixed in version 3.1.3. | Sat 24 Oct |
| CVE-2026-33557 | 9.1 critical | 1.0% | apache, kafka | A possible security vulnerability has been identified in Apache Kafka. By default, the broker property `sasl.oauthbearer.jwt.validator.class` is set to `org.apache.kafka.common.security.oauthbearer.DefaultJwtValidator`. It accepts any JWT token without validating its signature, issuer, or audience. An attacker can generate a JWT token from any issuer with the `preferred_username` set to any user, and the broker will accept it. We advise the Kafka users using kafka v4.1.0 or v4.1.1 to set the config `sasl.oauthbearer.jwt.validator.class` to `org.apache.kafka.common.security.oauthbearer.BrokerJwtValidator` explicitly to avoid this vulnerability. Since Kafka v4.1.2 and v4.2.0 and later, the issue is fixed and will correctly validate the JWT token. | Mon 26 Oct |
| CVE-2026-59139 | 9.1 critical | 1.0% | no CPE yet | Data::ReqRep::Shared versions before 0.05 for Perl allow an out-of-bounds read via an unvalidated arena offset and length in reqrep_recv_locked. The attach-time validator reqrep_validate_header checks the header scalars and region layout against the file size, but does not validate the array contents it then trusts. reqrep_recv_locked does memcpy(copy_buf, req_arena + arena_off, len) with arena_off and len read raw from the mmap'd segment and never bounded against the arena capacity (req_arena_cap). A local peer that can write the backing file can leave the header valid while poisoning a request slot's offset and length, so receiving the request copies a file-controlled offset and length out of the arena, reading adjacent memory or crashing the process. | Sat 24 Oct |
| CVE-2026-59140 | 9.1 critical | 1.0% | no CPE yet | Data::SortedSet::Shared versions before 0.03 for Perl allow an out-of-bounds read via unvalidated node indices in the rank and min/max query paths. The attach-time validator ss_validate_header bounds only the root index against the node pool (node_capacity). The order-statistics and min/max queries then follow children[], leftmost and rightmost node indices read raw from the mmap'd segment without bounding them against node_capacity. A full structural check (ss_validate_tree) exists but runs only via an explicit validate method, not on attach. A local peer that can write the backing file can leave the header valid while poisoning the tree links, so the next rank, min or max query dereferences an out-of-bounds node index, reading adjacent memory or crashing the process. | Sat 24 Oct |
| CVE-2026-59141 | 9.1 critical | 1.0% | no CPE yet | Data::RadixTree::Shared versions before 0.02 for Perl allow an out-of-bounds read via unvalidated node and arena indices in rdx_find_locked. The attach-time validator rdx_validate_header checks the header scalars and region layout against the file size, but does not validate the node records it then trusts. rdx_find_locked indexes nodes[cur].children[k] and reads each node's label_off and label_len raw from the mmap'd segment, none bounded against the node count or the arena size. A local peer that can write the backing file can leave the header valid while poisoning the node records, so a lookup dereferences an out-of-bounds node or arena index, reading adjacent memory or crashing the process. | Sat 24 Oct |
| CVE-2026-59142 | 9.1 critical | 1.0% | no CPE yet | Data::HashMap::Shared versions before 0.14 for Perl allow an out-of-bounds read via an unvalidated arena offset and length in shm_str_copy. The attach-time validator shm_validate_header checks the header scalars and region layout against the file size, but does not validate the array contents it then trusts. shm_str_copy does memcpy(dst, arena + off, len) with off and len read raw from the mmap'd segment and unbounded, on the each, keys, values, pop, shift, take, swap, drain and cursor paths. The get path bounds off and len separately and is not affected. A local peer that can write the backing file can leave the header valid while poisoning a record's offset and length, so iterating or draining the map copies a file-controlled offset and length out of the arena, reading adjacent memory or crashing the process. | Sat 24 Oct |
| CVE-2026-59145 | 9.1 critical | 1.0% | no CPE yet | Data::Intern::Shared versions before 0.02 for Perl allow an out-of-bounds read via unvalidated slot, reverse and arena indices in si_idx_find. The attach-time validator si_validate_header is thorough about the header and layout (magic, version, section offsets, total_size, count and arena_used) but does not validate the three arrays it then trusts. Every lookup in si_idx_find walks a triple indirection read straight from the mmap'd segment, arena[reverse[slots[i].id]], with no bound on slots[i].id against count, on the reverse[id] arena offset against arena_used, or on the arena record's length prefix. A local peer that can write the backing file can leave the header valid while poisoning a slot id, a reverse offset or an arena length prefix, so an id_of, intern or string lookup dereferences the chain out of bounds; because string() returns a file-controlled length of bytes from the arena, adjacent process memory can be disclosed. | Sat 24 Oct |
| CVE-2026-53431 | 9.1 critical | 1.0% | no CPE yet | Authentication Bypass by Capture-replay vulnerability in malach-it Boruta allows an attacker who has obtained a previously valid JWT client assertion to authenticate as the issuing OAuth client after the assertion has expired. Boruta accepts JWT-based client authentication (client_secret_jwt and private_key_jwt token endpoint authentication methods) but never enforces that the assertion's exp claim is in the future. The pre-check helper Boruta.Oauth.Request.Base.check_expiration/1 in lib/boruta/oauth/request/base.ex only verifies that an exp claim is present (it pattern-matches on the existence of the key and returns success), and the Joken token configuration used for signature verification, Boruta.Oauth.Authorization.Client.Token.token_config/0 in lib/boruta/oauth/authorization/client.ex, returns an empty map, so Joken's default exp claim validator is not engaged either. Any attacker who obtains a validly-signed client assertion (for example through logs, reverse proxies, browser tooling, or other observability surfaces) can replay it indefinitely to authenticate as the client and obtain access tokens with that client's privileges. This issue affects boruta: from 2.3.0 before 2.3.7. | Fri 23 Oct |
| CVE-2026-73486 | 9.0 critical | 1.0% | flowiseai, flowise | Flowise before 3.1.3 contains a code injection vulnerability in the CSV Agent node's customReadCSV parameter that allows authenticated attackers to execute arbitrary Python code. The validator uses a static regex blocklist that can be bypassed through obfuscation techniques, enabling attackers to execute code in the unsandboxed pyodide environment with full system access. | Sat 24 Oct |
| CVE-2026-73487 | 9.0 critical | 1.0% | flowiseai, flowise | Flowise before 3.1.3 contains a regex-based Python code validator bypass in CSV and Airtable Agent nodes that allows unauthenticated attackers to inject malicious code via prompt injection. Attackers can exploit unblocked pandas functions like pd.read_json() to exfiltrate datasets, perform SSRF against internal services, or achieve code execution through the unauthenticated prediction API. | Sat 24 Oct |
| CVE-2026-89493 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate rl_used against rl_count in refcount block validator ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array with: for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) { rec = &rb->rf_records.rl_recs[i]; ... rl_recs[] lives in a single metadata block (4096 bytes on the common configuration), so its real capacity is fixed by ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the 16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly off disk by ocfs2_validate_refcount_block() and are never checked against that capacity, nor against each other, before any refcount/reflink/CoW operation walks the array. A crafted (or corrupted) refcount block with rl_used == 0xffff makes the loop above walk far past the end of the block, dereferencing rl_recs[i] for i up to 65534. The resulting index is then handed to the sibling ocfs2_insert_refcount_rec(), whose insert-shift does: if (index < le16_to_cpu(rf_list->rl_used)) memmove(&rf_list->rl_recs[index + 1], &rf_list->rl_recs[index], (le16_to_cpu(rf_list->rl_used) - index) * sizeof(struct ocfs2_refcount_rec)); i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an offset already past the block. This is reachable from an ordinary reflink (FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent whose cpos sorts past every real record in the leaf forces the lookup to run off the end instead of returning early on a match. The attacker model is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a raw write to the block device backing an already-mounted ocfs2 filesystem. ocfs2_validate_refcount_block() already validates the block's ECC, signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used against the block's actual on-disk capacity. This is the same class of gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes for the sibling extent-list header, which checks both the record capacity and the "used" bound before any code walks h_list.l_recs[]: if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) { rc = ocfs2_error(...); goto bail; } if (le16_to_cpu(eb->h_list.l_next_free_rec) > le16_to_cpu(eb->h_list.l_count)) { rc = ocfs2_error(...); goto bail; } Add the equivalent pair of checks to ocfs2_validate_refcount_block(): reject a refcount block whose rl_count does not match the fixed per-block capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used > rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set, because in that case the same union bytes hold an ocfs2_extent_list (rf_list), not the refcount record list (rf_records) -- that layout is already validated separately by ocfs2_validate_extent_block() when the referenced extent block is read. This mirrors the existing "!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or rf_list is the live member of the union. With this in place, a forged rl_used/rl_count is caught at block validation time (ocfs2_error()), consistent with every other corruption check in this function, instead of driving an out-of-bounds read in ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove() in ocfs2_insert_refcount_rec(). Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build: replaying the same reflink (FICLONE) reliably hit a KASAN report in __ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch, and triggers no report once ocfs2_validate_refcount_block() rejects the forged rl_used/rl_count. | 19 Oct |
| CVE-2026-62677 | 8.8 high | 1.0% | no CPE yet | Omnigent is an open-source AI agent framework and meta-harness for orchestrating coding agents. Prior to 0.3.0, an authenticated user can upload a session-scoped agent bundle with an absolute or traversal-containing os_env.cwd value because omnigent/spec/parser.py stores the value verbatim and omnigent/spec/validator.py does not constrain it. On a runner where OMNIGENT_RUNNER_WORKSPACE is unset, omnigent/runner/resource_registry.py preserves the attacker-controlled path and omnigent/inner/os_env.py uses the resolved path as the environment root and copytree source. The _assert_within_cwd check then treats that attacker-selected root as trusted, allowing sys_os_read, write, edit, and shell tools to access runner files and environment secrets outside the intended workspace. This issue is fixed in version 0.3.0. | 14 Oct |
| CVE-2026-76221 | 8.7 high | 1.0% | gitpython_project, gitpython | GitPython before 3.1.58 contains a config-name injection vulnerability in the option-name validator that allows attackers to forge arbitrary git-config directives by injecting equals signs, hash symbols, and whitespace into option names. Attackers can inject malicious option names like 'sshCommand = touch /tmp/RCE #' to execute arbitrary commands via core.sshCommand or core.hooksPath on the next git operation. | Sat 24 Oct |
| CVE-2026-58390 | 8.0 high | 1.0% | no CPE yet | OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the OpenVPN connection-status dashboard widget in src/opnsense/www/js/widgets/OpenVPNClients.js and the connection-status view place a client common_name into data-common-name attributes without quote-safe encoding. Exploitation requires an OpenVPN server configured with username-as-common-name and RADIUS or LDAP authentication, plus the ability to provision or self-register a valid backend username containing a double quote; deployments where the same administrator controls both the identity backend and firewall do not cross a separate trust boundary. An authenticated client using that username can close the attribute and add an event handler, while the local user database is not affected because its username validator rejects quotes. Script executes in an administrator's session when the administrator opens the dashboard or connection-status page and the injected event is triggered; the demonstrated payload used pointer movement over the client row rather than unconditional page-load execution. The advisory demonstrates that the script can read config.xml, invoke privileged APIs, reset the root password, and obtain root command execution. This issue is fixed in version 26.1.11. | 20 Oct |
| CVE-2026-59887 | 7.5 high | 1.0% | markdown-it, linkify-it | linkify-it is a links recognition library with full Unicode support. Prior to 5.0.2, the mailto: schema validator used by .test() and .match() can be invoked at every mailto: occurrence and scan the remaining input through src_email_name in lib/re.mjs, causing O(n^2) CPU consumption on crafted user text. This issue is fixed in version 5.0.2. | Sun 25 Oct |
| CVE-2026-49485 | 7.5 high | 1.0% | no CPE yet | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.9 and 6.9.4.2, all implementations of FHIRPathEngine accept arbitrary FHIRPath expressions and evaluate them without input validation, and the FHIRPath functions matches(), matchesFull(), and replaceMatches() pass user-controlled regular expressions to Java's Pattern.compile() and String.replaceAll() through an incomplete timeout utility. An attacker can send a resource containing an evil regex pattern that causes catastrophic backtracking, exhausting CPU resources and causing denial of service in the FHIR Validator HTTP endpoint and affected org.hl7.fhir.* modules. This issue is fixed in versions 6.9.9 and 6.9.4.2. | Sat 24 Oct |
| CVE-2026-11605 | 7.5 high | 1.0% | no CPE yet | The issue is a resource exhaustion vulnerability associated with DNSSEC validation. BIND always validates all RRSIG records in an answer, even if they are not strictly needed. A query to an authoritative server/zone which returns many valid but superfluous RRSIG records causes the validator to waste disproportionate CPU time. This issue affects BIND 9 versions 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, and 9.20.9-S1 through 9.20.24-S1. | Sat 24 Oct |
| CVE-2026-54080 | 6.9 medium | 1.0% | no CPE yet | veraPDF PDF parser is a PDF parser for veraPDF. Prior to 1.30.2 and 1.31.23, veraPDF-parser contains a denial-of-service vulnerability in veraPDF-parser/src/main/java/org/verapdf/pd/font/cmap/CMapParser.java and veraPDF-parser/src/main/java/org/verapdf/parser/postscript/PSOperator.java, where a crafted Type 0 font /Encoding or /ToUnicode CMap stream can execute unbounded PostScript array allocation or a zero-increment for loop and exhaust validator memory or CPU. This issue is fixed in versions 1.30.2 and 1.31.23. | Fri 23 Oct |
| CVE-2026-54081 | 6.9 medium | 1.0% | no CPE yet | veraPDF PDF parser is a PDF parser for veraPDF. Prior to 1.30.2 and 1.31.23, veraPDF-parser contains a denial-of-service vulnerability in veraPDF-parser/src/main/java/org/verapdf/pd/font/type1/Type1FontProgram.java and veraPDF-parser/src/main/java/org/verapdf/parser/postscript/PSOperator.java, where a crafted Type 1 font /FontDescriptor /FontFile program can execute unbounded PostScript array allocation, a zero-increment for loop, or self-recursive toExecute user dictionary lookups and exhaust validator memory, CPU, or stack. This issue is fixed in versions 1.30.2 and 1.31.23. | Fri 23 Oct |
| CVE-2026-48038 | 5.3 medium | 1.0% | no CPE yet | joi is a schema description language and data validator for JavaScript. Prior to 17.13.4 and 18.2.1, denial of service is possible via an untrapped exception in services validating user-supplied JSON or object input with recursive link() schemas. When validate() is called without try/catch in a request handler, deeply nested input can trigger an unhandled RangeError and potentially crash the process; lower-impact paths using validateAsync() or try/catch produce a RangeError instead of a structured ValidationError. This issue is fixed in versions 17.13.4 and 18.2.1. | Sat 24 Oct |
| CVE-2026-18675 | 5.3 medium | 1.0% | no CPE yet | The dataplane token validator in kuma-cp performs an unchecked Go type assertion on the JWT kid header. A token whose kid is a JSON number decodes as a float64 and triggers a runtime panic before any signature, claims, or authorization check runs. The panic terminates the entire kuma-cp process, HTTP API, the health and readiness endpoints, and xDS. Unauthenticated access to the dataplane gRPC server can trigger the crash with a malformed token A single request is a transient interruption; sustaining an outage requires repeated requests. | Fri 23 Oct |
| CVE-2026-33471 | 9.6 critical | 0.00% | nimiq, nimiq_proof-of-stake | nimiq-block contains block primitives to be used in Nimiq's Rust implementation. `SkipBlockProof::verify` computes its quorum check using `BitSet.len()`, then iterates `BitSet` indices and casts each `usize` index to `u16` (`slot as u16`) for slot lookup. Prior to version 1.3.0, if an attacker can get a `SkipBlockProof` verified where `MultiSignature.signers` contains out-of-range indices spaced by 65536, these indices inflate `len()` but collide onto the same in-range `u16` slot during aggregation. This makes it possible for a malicious validator with far fewer than `2f+1` real signer slots to pass skip block proof verification by multiplying a single BLS signature by the same factor. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. | Mon 26 Oct |
| CVE-2026-65583 | 9.1 critical | 0.00% | apache, cxf | Apache CXF’s OIDC relying-party token validation could accept self-issued ID tokens without enforcing required claim checks (issuer/subject/audience/time and sub_jwk binding), enabling authentication bypass with crafted tokens. However, note that self-issued ID tokens are not accepted by default in the validator. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fixes this issue. | Sat 24 Oct |
| CVE-2026-31709 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. | 19 Oct |
| CVE-2026-19570 | 8.8 high | 0.00% | no CPE yet | The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets. The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_BT_BAP_BROADCAST_SINK depends on CONFIG_BT_BAP_SCAN_DELEGATOR, so the path is active in every broadcast-sink build once the device is periodic-advertising-synced. An attacker in radio range who operates a broadcast source the device syncs to — or who impersonates the advertiser address and SID of one already in use, periodic advertising data being unauthenticated — can change the BASE at will; each new BASE is re-parsed. A crafted BASE therefore writes attacker-chosen bytes past the end of a fixed static object in .bss: up to roughly 236 bytes for an oversized metadata LTV, plus whole struct bt_bap_bass_subgroup records for each subgroup beyond CONFIG_BT_BAP_BASS_MAX_SUBGROUPS. This is memory corruption of adjacent Bluetooth-audio state reachable with no pairing, bonding or GATT connection, with a potential for remote code execution in the Bluetooth RX thread; in addition, the unvalidated metadata_len is forwarded to bt_bap_scan_delegator_mod_src(), which neither clamps it nor rejects it, leading to a further copy into the receive state and to out-of-bounds memory being disclosed in the BASS receive-state notification sent to a connected Broadcast Assistant. The fix rejects a BASE carrying more subgroups than the receive state can hold (discarding the update entirely) and omits metadata that does not fit rather than copying it, and additionally honours the previously-ignored error return of the subgroup decode pass. | 9 Oct |
| CVE-2026-63571 | 8.7 high | 0.00% | bouncycastle, bc-csharp | Improper verification of cryptographic signature in the attribute certificate path validator (PkixAttrCertPathValidator, also used by PkixAttrCertPathBuilder) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows a remote attacker to have a forged X.509 attribute certificate accepted as valid, and so obtain whatever roles or privileges an application grants on the strength of its attributes, via an attribute certificate that names a trusted attribute authority as its issuer but was not signed by it, because the RFC 3281 validation steps check the holder and issuer certification paths, validity period, extensions and revocation status but never verify the attribute certificate's signature with the issuer's public key. Only applications that use these classes to validate attribute certificates are affected. | Wed 28 Oct |
| CVE-2026-116811 | 8.7 high | 0.00% | no CPE yet | OpenPanel before 3.0.0 contains a sandbox escape vulnerability in the js-runtime validator that allows a project member to bypass the AST allowlist by aliasing the Function constructor. Attackers with write access can read payload.constructor.constructor into a local and call it to run arbitrary code in the worker process. | Tue 27 Oct |
| CVE-2026-68494 | 8.7 high | 0.00% | no CPE yet | The fix released in jackson-core 2.18.6 and 2.21.1 for CVE-2026-18401 (GHSA-72hv-8253-57qq, number length constraint bypass in the non-blocking parser) is incomplete. This record covers the remaining bypass. The earlier fix wired validateIntegerLength() into a new _setIntLength() helper and invoked it wherever the integer portion of a number is decided: a terminator byte arrives, a '.' or 'e'/'E' is seen, or input ends inside a fully buffered value. It was not invoked on the attacker-relevant path where the parser runs out of input while still inside the MINOR_NUMBER_INTEGER_DIGITS minor state and returns NOT_AVAILABLE to the caller. As a result, an attacker who streams JSON to a non-blocking parser in many small chunks, without ever sending a terminator byte, keeps the parser inside MINOR_NUMBER_INTEGER_DIGITS indefinitely. _textBuffer.expandCurrentSegment() grows the accumulator on every chunk while validateIntegerLength() is never called. The accumulator is bounded only by maxStringLength (20 MiB by default) rather than by maxNumberLength (1000 by default), an amplification of roughly 20,000x over the documented limit. Because Java char values occupy two bytes, a single connection can be driven to approximately 40 MiB of heap before the validator finally fires when the value completes. The equivalent fraction-path code is correct: _finishFloatFraction() calls _setFractLength() before its NOT_AVAILABLE return. The missing call affects the integer-digit paths in _startPositiveNumber(), _startNegativeNumber() and _finishNumberIntegralPart() in NonBlockingUtf8JsonParserBase. Impact: reactive frameworks such as Spring WebFlux/Reactor, Quarkus, Helidon and Vert.x feed inbound HTTP or gRPC bytes to the async parser as they arrive, which is precisely the chunked-feed shape required. Operators who set StreamReadConstraints.maxNumberLength expecting it to cap memory per number value do not get that guarantee; memory accumulates per concurrent connection and attacker-controlled concurrency can exhaust the JVM heap. The synchronous parsers (UTF8StreamJsonParser, ReaderBasedJsonParser) and the async parser operating on complete input are not affected. Exploitation requires only the ability to stream data to a parsing endpoint; no privileges or user interaction are needed. This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.7, and from 2.19.0 through 2.21.3, and tools.jackson.core:jackson-core from 3.0.0 through 3.1.3. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-r7wm-3cxj-wff9 states the affected 2.x range without a lower bound. The 2.22.x and 3.2.x release lines are not affected: those branches were created after the fix commit landed on 2026-05-21 and therefore contain it from their initial releases (2.22.0, tagged 2026-06-03, and 3.2.0, tagged 2026-06-08). | Fri 23 Oct |
| CVE-2026-96890 | 8.7 high | 0.00% | github, enterprise_server | A Server-Side Request Forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed a repository contributor to cause the appliance to issue requests to attacker-controlled internal hosts, which could be chained to achieve remote code execution on the appliance. The secret scanning validator for GCP service account credentials trusted the token endpoint embedded in a committed credential and issued a request to it without restricting the destination. Exploitation required an authenticated user with permission to push to a repository on an instance with GitHub Advanced Security and secret scanning validity checks enabled, a non-default configuration. This vulnerability affected GitHub Enterprise Server 3.20, 3.21, and 3.22 and was fixed in versions 3.20.9, 3.21.7, and 3.22.2. This vulnerability was reported through the GitHub Bug Bounty program. | 9 Oct |
| CVE-2026-82861 | 8.7 high | 0.00% | no CPE yet | @hulumi/policies versions before 1.3.2 contain a parent spoof bypass vulnerability that allows attackers to submit spoofed SecureBucket parent evidence during policy evaluation. Attackers can bypass security policy checks by providing falsified evidence, causing the validator to miss unsafe bucket configurations. | 8 Oct |
| CVE-2026-74041 | 8.6 high | 0.00% | no CPE yet | Wazuh 4.14.3 before 4.14.8 and 4.10.4 contains a case-sensitivity mismatch between the ossec.conf validator and wazuh-logcollector that bypasses remote-command validation. Authenticated users with manager:update_config can inject an uppercase LOG_FORMAT command localfile that the collector runs as root on reload. | Mon 26 Oct |
| CVE-2026-100680 | 8.6 high | 0.00% | no CPE yet | Budibase versions before 3.45.0 fail to disable external JSON reference resolution in the OpenAPI/Swagger import validator, allowing authenticated builders to read arbitrary local files. Attackers with builder access can embed file:// references in OpenAPI specifications submitted to the import endpoint to exfiltrate sensitive files including environment variables containing JWT secrets, API keys, and database credentials. | 8 Oct |
| CVE-2026-42449 | 8.5 high | 0.00% | n8n-mcp | n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. In versions 2.47.4 through 2.47.13, the SDK embedder path (N8NDocumentationMCPServer constructor, getN8nApiClient(), and validateInstanceContext()), the synchronous URL validator in SSRFProtection.validateUrlSync() had no IPv6 checks. IPv4-mapped IPv6 addresses such as http://[::ffff:169.254.169.254] bypassed the cloud-metadata, localhost, and private-IP range checks. An attacker able to supply an n8nApiUrl value could cause the server to issue HTTP requests to cloud metadata endpoints, RFC1918 private networks, or localhost services. Response bodies are returned to the caller (non-blind SSRF), and the n8nApiKey is forwarded in the x-n8n-api-key header to the attacker-controlled target. Projects with deployments embedding n8n-mcp as an SDK using N8NDocumentationMCPServer or N8NMCPEngine with user-supplied InstanceContext are affected. The first-party HTTP server deployment was not primarily affected — it has a second async validator (validateWebhookUrl) that catches IPv6 addresses. This issue has been fixed in version 2.47.14. If users are unable to upgrade immediately as a workaround they can validate URLs before passing to the SDK, restrict egress at the network layer, and reject user-controlled n8nApiUrl values. | Mon 26 Oct |
| CVE-2026-68558 | 8.5 high | 0.00% | no CPE yet | Wekan is open source kanban built with Meteor. From 8.36 until 9.74, the outgoing webhook Integration URL validator in models/integrations.js checked only the literal URL.hostname against regular expressions, so DNS names such as 169-254-169-254.nip.io passed that first-line check. The delivery path's fetchSafe guard already blocked the reported IPv4 destination, but its separate IPv4-only resolver and duplicated blocklist created inconsistent all-address-family enforcement and drift risk between input-time and connection-time validation. Version 9.74 makes server/lib/ssrfGuard.js resolve all addresses with `dns.lookup({ all: true })`, validate every result through the shared isIpBlocked logic, pin the connection, and block redirects. This issue is fixed in version 9.74. | Mon 26 Oct |
| CVE-2026-118669 | 8.4 high | — | no CPE yet | OAuthLib is an implementation of the OAuth request-signing logic for Python 3.6+. Prior to 4.0.0, the client_credentials and Resource Owner Password Credentials token grant handlers can authenticate request.client as one confidential client while retaining an attacker-supplied request.client_id for validate_grant_type and validate_scopes. A lower-privilege authenticated client can therefore cause grant and scope authorization to use another client's identity when an application validator relies on the documented client_id argument, potentially issuing tokens with unauthorized grants or scopes. Validators that authorize exclusively from request.client may not be affected. This issue is fixed in version 4.0.0. | Wed 28 Oct |
50 of 113 · Next
Download these 113 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.