Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-89778 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: isofs: fix out-of-bounds page array access on empty zisofs block zisofs_uncompress_block()'s empty-block fast path returns pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the decompression path which returns bytes produced relative to poffset. zisofs_fill_pages() uses that return to advance its page cursor, so when the zisofs block size is below PAGE_SIZE and a sub-page block leaves poffset partway into a page, a following empty block over-counts and advances pages[] one element past its end, after which "if (poffset && *pages)" reads pages[1] out of bounds. rock.c only rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a compressed file on such a mounted ISO9660 image. Return the byte count relative to poffset and zero only [poffset, PAGE_SIZE) of the first page, matching the decompression path. The page-aligned case (poffset == 0) is unaffected. BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290) Read of size 8 at addr ffff88800f5eac48 by task exploit/142 zisofs_read_folio (fs/isofs/compress.c:290) read_pages (mm/readahead.c:184) ... filemap_read (mm/filemap.c:2814) vfs_read (fs/read_write.c:574) __x64_sys_pread64 (fs/read_write.c:769) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address is located 0 bytes to the right of the allocated 8-byte region in the kmalloc-8 cache | 19 Oct |
| CVE-2026-80609 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: qede: fix out-of-bounds check for cqe->len_list[] Move index check before element access. | 16 Oct |
| CVE-2025-65570 | 9.8 critical | 1.0% | jsish | A type confusion in jsish 2.0 allows incorrect control flow during execution of the OP_NEXT opcode. When an “instanceof” expression uses an array element access as the left-hand operand inside a for-in loop, the instructions implementation leaves an additional array reference on the stack rather than consuming it during OP_INSTANCEOF. As a result, OP_NEXT interprets the array as an iterator object and reads the iterCmd function pointer from an invalid structure, potentially causing a crash or enabling code execution depending on heap layout. | 13 Oct |
| CVE-2026-33976 | 9.6 critical | 1.0% | streetwriters, notesnook_desktop, notesnook_mobile | Notesnook is a note-taking app. Prior to version 3.3.11 on Web/Desktop and 3.3.17 on Android/iOS, a stored XSS in the Web Clipper rendering flow can be escalated to remote code execution in the desktop app. The root cause is that the clipper preserves attacker-controlled attributes from the source page’s root element and stores them inside web-clip HTML. When the clip is later opened, Notesnook renders that HTML into a same-origin, unsandboxed iframe using `contentDocument.write(...)`. Event-handler attributes such as `onload`, `onclick`, or `onmouseover` execute in the Notesnook origin. In the desktop app, this becomes RCE because Electron is configured with `nodeIntegration: true` and `contextIsolation: false`. Version 3.3.11 Web/Desktop and 3.3.17 on Android/iOS patch the issue. | Mon 26 Oct |
| CVE-2026-115995 | 9.4 critical | 1.0% | no CPE yet | A security vulnerability has been detected in Unitree Robotics Unitree Go2 up to 1.1.11.4. The impacted element is the function set_volume of the file gpt_thread.py of the component chat_go. Such manipulation of the argument Value leads to os command injection. The attack can be launched remotely. Upgrading to version 1.1.11.5 is sufficient to resolve this issue. You should upgrade the affected component. The vendor confirmed early: "Submission 990502 corresponds to our internal ticket #474 (Go2 chat_go set_volume OS command injection, CWE-78)." | Mon 26 Oct |
| CVE-2026-113744 | 9.3 critical | 1.0% | no CPE yet | A security vulnerability has been detected in Tenda AC19 16.03.10.07. The impacted element is the function formSetFirewallCfg of the file /goform/SetFirewallCfg of the component httpd Web Management Service. Such manipulation of the argument firewallEn leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. | Wed 28 Oct |
| CVE-2026-44990 | 9.3 critical | 1.0% | no CPE yet | ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue. | Mon 26 Oct |
| CVE-2026-65048 | 9.3 critical | 1.0% | no CPE yet | Ninja Forms plugin for WordPress versions 3.10.4 through 3.14.9 contains an unauthenticated stored cross-site scripting vulnerability in the Repeatable Fieldset feature where parseSubmissionIndex() accepts arbitrary strings as submission indexes without numeric validation, and admin_form_element() interpolates the index directly into HTML without escaping. An unauthenticated attacker can submit a public form with a crafted repeater child key containing malicious script payloads, which execute in an administrator's browser when viewing submissions in the WordPress admin panel, enabling session-cookie theft, creation of administrator accounts, installation of malicious plugins, and arbitrary modification of site content. | Sat 24 Oct |
| CVE-2026-84731 | 9.3 critical | 1.0% | no CPE yet | An unauthenticated remote attacker can bypass authentication and gain full access to administrative API endpoints in Nutanix Prism Element by including a crafted internal management HTTP header. The vulnerability is caused by a misconfiguration in the application's authentication filters. Consequently, the server responds with a Set-Cookie header containing a valid JSESSIONID. This session cookie decodes to a JSON Web Token (JWT) granting maximum cluster administrative privileges. Successful exploitation allows the attacker to execute root-level commands on all Controller VMs (CVMs) in the cluster, leading to complete cluster destruction and unauthorized access to VM memory and virtual disks. | 16 Oct |
| CVE-2026-5388 | 9.3 critical | 1.0% | no CPE yet | justhtml before 1.15.0 contains multiple security issues in URL sanitization helpers (clean_url_value/clean_url_in_js_string), HTML serialization, Markdown passthrough (html_passthrough=True), and several custom sanitization-policy edge cases. Depending on configuration, an attacker can bypass sanitization to inject active HTML and JavaScript — for example via encoded javascript: URLs, backslash-based relative URLs resolved as remote hosts, markup-breaking programmatic element/attribute names or HTML comments, raw </textarea> reintroduction through Markdown passthrough, or preserved <style>/<meta http-equiv=refresh>/<base href> tags in custom policies. Most custom-policy issues do not affect the default sanitize=True configuration; they primarily affect helper APIs, programmatic DOM construction, html_passthrough=True, and custom policies/transform pipelines. | 12 Oct |
| CVE-2026-78167 | 9.3 critical | 1.0% | no CPE yet | A weakness has been identified in EFM ipTIME T16000M 14.20.2. The impacted element is the function httpcon_check_session_url of the component Session Validation Handler. This manipulation causes improper authentication. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | 12 Oct |
| CVE-2026-57073 | 9.1 critical | 1.0% | no CPE yet | HTML::Bare versions through 0.04 for Perl have an unbounded character lookahead. The parserc_parse function attempts to check for multicharacter strings such as "<![CDATA" or element terminators such as ">" without checking that the offsets are within the buffer. Truncated strings such as "<a/" can trigger an out-of-bounds read. Note that the latest version available on CPAN is version 0.02. Newer versions are available on the git repository. | Sat 24 Oct |
| CVE-2026-57074 | 9.1 critical | 1.0% | no CPE yet | XML::Bare versions through 0.53 for Perl have an unbounded character lookahead. The parserc_parse function attempts to check for multicharacter strings such as "<![CDATA" or element terminators such as ">" without checking that the offsets are within the buffer. Truncated strings such as "<a/" can trigger an out-of-bounds read. | Sat 24 Oct |
| CVE-2026-9390 | 9.1 critical | 1.0% | xml\, \ | XML::Sig versions before 0.71 for Perl allow XPath injection in ID lookup. verify() and _get_signed_xml() in lib/XML/Sig.pm build XPath expressions by concatenating the SignedInfo/Reference/@URI value read from the document being verified. The value is neither escaped nor checked against the NCName grammar that XML requires of an ID, so a URI containing a single quote closes the string literal in the generated expression and appends arbitrary XPath operators. A crafted URI can make the lookup match elements the reference does not name, or every element in the document, so which node is selected for digest verification is decided by the injected expression rather than by the reference. | 23 Oct |
| CVE-2026-72320 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_lookup: fix catchall element handling with inverted lookups nft_lookup_eval() decides whether a lookup matched (`found`) from the direct set lookup and priv->invert before falling back to the catchall element used by interval sets (e.g. nft_set_rbtree) for the open-ended default range. Since `found` is never recomputed after `ext` is replaced by the catchall lookup, inverted lookups (NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the catchall element, producing the wrong verdict. Fold the catchall lookup into `ext` before computing `found`, matching the order already used by nft_objref_map_eval(). | 21 Oct |
| CVE-2026-58016 | 9.1 critical | 1.0% | gnome, redhat, glib, enterprise_linux | A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a `node` element nested within other elements like `method`, `signal`, `property` or `arg`. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service. | 14 Oct |
| CVE-2026-118579 | 8.9 high | 1.0% | no CPE yet | A weakness has been identified in D-Link DIR-505 1.10B02. The impacted element is the function main of the file /secmark1524.cgi of the component Web Management CGI. This manipulation of the argument accu/pass/code/hash/cmds causes backdoor. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. | Wed 28 Oct |
| CVE-2026-113736 | 8.9 high | 1.0% | no CPE yet | A vulnerability has been found in D-Link DHP-W610AV 1.02EUb03. The impacted element is the function login_prepare_hnap of the file etc/defnodes/defaultvalue.xml of the component HNAP Login. The manipulation of the argument Password leads to empty password in configuration file. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | Wed 28 Oct |
| CVE-2026-7546 | 8.9 high | 1.0% | no CPE yet | A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. | Mon 26 Oct |
| CVE-2026-7719 | 8.9 high | 1.0% | no CPE yet | A security flaw has been discovered in Totolink WA300 5.2cu.7112_B20190227. The affected element is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument http_host results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. | Mon 26 Oct |
| CVE-2026-60026 | 8.9 high | 1.0% | no CPE yet | Joomla Extension - themexpert.com - Authenticated PHP code execution in Quix Page Builder < 6.2.1 - The Joomla extension Quix Page Builder Pro is vulnerable to an authenticated PHP code execution. Authenticated builder user (core.create/core.edit) could inject PHP tags in element content, that got executed via view-cache include(). Requires caching on (default). | Sat 24 Oct |
| CVE-2025-15045 | 8.9 high | 1.0% | tenda, wh450_firmware | A flaw has been found in Tenda WH450 1.0.0.18. The affected element is an unknown function of the file /goform/Natlimit of the component HTTP Request Handler. This manipulation of the argument page causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used. | 19 Oct |
| CVE-2025-15046 | 8.9 high | 1.0% | tenda, wh450_firmware | A vulnerability has been found in Tenda WH450 1.0.0.18. The impacted element is an unknown function of the file /goform/PPTPClient of the component HTTP Request Handler. Such manipulation of the argument netmsk leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | 19 Oct |
| CVE-2026-90162 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window. | 21 Oct |
| CVE-2022-42719 | 8.8 high | 1.0% | linux, fedoraproject, linux_kernel, fedora, debian_linux | A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code. | 14 Oct |
| CVE-2026-15484 | 8.7 high | 1.0% | no CPE yet | A vulnerability was detected in TRENDnet TEW-821DAP 1.12B01. The affected element is the function sub_41EC14 of the file /goform/tools_nslookup of the component ssi. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The vendor explains: "We are unable to confirm the existence of the vulnerabilities for (...) TEW-821DAP (v1.0R) as these items have been EOL. " This vulnerability only affects products that are no longer supported by the maintainer. | Sun 25 Oct |
| CVE-2026-60109 | 8.7 high | 1.0% | zeek | Zeek before 8.0.9 contains a null pointer dereference vulnerability in its Kerberos protocol analyzer that allows unauthenticated remote attackers to crash the sensor by sending a crafted KRB_ERROR message with error-code 25 (KDC_ERR_PREAUTH_REQUIRED) containing a PA-DATA element with padata-type 2, 3, 11, or 19. Attackers can exploit a parser and analyzer state mismatch where proc_padata() dereferences an uninitialized pa_data_element field selected by the wrong parsing arm, triggering a crash via a single UDP or TCP packet to port 88 without any credentials or prior authentication. | Fri 23 Oct |
| CVE-2026-60027 | 8.7 high | 1.0% | no CPE yet | Joomla Extension - themexpert.com - Unauthenticated path traversal / file read in Quix Page Builder < 6.2.1 - The Joomla extension Quix Page Builder Pro is vulnerable to a unauthenticated path traversal via form elements. Unauthenticated users frontend users are allowed traversal paths and read arbitrary files. Requires a published page with a Form element. | Fri 23 Oct |
| CVE-2026-112770 | 8.7 high | 1.0% | no CPE yet | Craft CMS 4.x before 4.18.8 and 5.x before 5.11.0 contains a remote code execution vulnerability in the Twig group filter, which invokes non-string arrow arguments as callables without the checkArrow guard used by other arrow-accepting filters. Authenticated control panel users can pass an array-callable such as FileHelper::writeToFile via element-select condition rules to write a webshell to the webroot and execute code as the web user. | 22 Oct |
| CVE-2026-112773 | 8.7 high | 1.0% | no CPE yet | Craft CMS from 5.0.0 before 5.11.0 contains a remote code execution vulnerability that allows authenticated Control Panel users to escape the Twig sandbox by passing uncleansed criteria to getNext, getPrev, or getOwners. Attackers can inject Yii "as" or "on" config keys to attach malicious event handlers that execute when the element query runs, achieving code execution as the web user. | 19 Oct |
| CVE-2026-75140 | 8.7 high | 1.0% | no CPE yet | jsoup through 1.23.2, fixed in commit 862ba2f, contains an uncontrolled resource consumption vulnerability in XmlTreeBuilder that allows remote attackers to exhaust JVM heap memory by supplying a deeply nested XML document with uniquely-namespaced elements. The builder copies the entire inherited namespace map on every start element, causing quadratic time and memory complexity, which attackers can exploit to trigger an OutOfMemoryError and terminate the application. | 18 Oct |
| CVE-2026-111279 | 8.7 high | 1.0% | no CPE yet | Dragonfly through 2.0.2 contains an unbounded memory allocation vulnerability that allows unauthenticated clients to exhaust memory by passing a negative COUNT to HRANDFIELD, ZRANDMEMBER or SRANDMEMBER. Attackers can send a single command against a one-element key with a huge negative COUNT to trigger the OOM killer, terminating the instance for all clients. | 16 Oct |
| CVE-2026-110385 | 8.7 high | 1.0% | no CPE yet | A remote code execution vulnerability in ONLYOFFICE Document Server versions before10.0.0 allows an authenticated attacker with a valid Inbox-compatible JWT to execute arbitrary operating system commands as the ds service account. The Document Builder API improperly processes user-controlled converter XML supplied through the optional third argument of builder.SaveFile(). By injecting a duplicate m_sFileTo element, an attacker can override the server-generated output path and write arbitrary content outside the designated job directory. This allows the attacker to overwrite the runtime.json configuration file, modify the Document Builder executable path and arguments, and execute arbitrary commands when a subsequent Document Builder job is processed. | 16 Oct |
| CVE-2026-78416 | 8.7 high | 1.0% | no CPE yet | Craft CMS versions from 4.0.0-RC1 before 4.18.2 and from 5.0.0-RC1 before 5.10.6 contain an authenticated remote code execution vulnerability in control panel element-search condition handling. A JSON cleanse bypass in condition.config allows Yii behavior/event configuration keys to be interpreted after decoding, enabling command execution as the PHP/web user. | 12 Oct |
| CVE-2026-50733 | 8.6 high | 1.0% | no CPE yet | Markdown Preview Enhanced before 0.8.28 parses WaveDrom diagrams by evaluating untrusted markdown content with eval(), allowing arbitrary JavaScript execution. The flaw affects every render path - the live preview (window.eval) and presentation mode plus HTML export (the bundled WaveDrom.ProcessAll()/eva() helpers) - and can also be triggered through a <script type="WaveDrom"> element injected via raw HTML in markdown. When a victim previews or exports a crafted markdown document, an attacker can execute arbitrary code, leading to arbitrary file write. Fixed in 0.8.28 by parsing with JSON5.parse() and sanitizing WaveDrom data scripts to inert strict JSON. | Mon 26 Oct |
| CVE-2026-78050 | 8.6 high | 1.0% | no CPE yet | A vulnerability was found in Comfast CF-N1-S 2.6.0.1. The affected element is the function sub_41AD7C of the file /cgi-bin/mbox-config?method=SET§ion=ntp_timezone of the component Web Management. The manipulation of the argument timestr/ntp_client_enabled results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. | 12 Oct |
| CVE-2026-54513 | 8.1 high | 1.0% | fasterxml, jackson-databind | jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.10.0 until 2.18.8, 2.21.4, and 3.1.4, BasicPolymorphicTypeValidator.Builder.allowIfSubTypeIsArray() allowlists any array type based only on clazz.isArray(), without validating the array's component (element) type against the configured allowlist. A PTV built with allowIfSubTypeIsArray() plus an explicit concrete-type allowlist therefore still permits EvilType[] even though EvilType is not allowlisted. When Jackson deserializes the elements and no per-element type IDs are present, it instantiates the component type directly with no further PTV check, bypassing the allowlist. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4. | Sun 25 Oct |
| CVE-2026-14637 | 7.8 high | 1.0% | no CPE yet | A security vulnerability has been detected in kirilkirkov Ecommerce-CodeIgniter-Bootstrap up to 13fd582aaf49aeab7438acc0fc3eb973a1f5e6a7. The affected element is the function getCartItems in the library application/libraries/ShoppingCart.php. The manipulation of the argument shopping_cart leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The identifier of the patch is 49b20f53de2b7ec34e920b11c863f1491d911a04. It is recommended to apply a patch to fix this issue. | Sun 25 Oct |
| CVE-2026-69923 | 7.8 high | 1.0% | microsoft, windows_11_24h2, windows_11_25h2, windows_11_26h1 | Uncontrolled search path element in Windows AI allows an authorized attacker to elevate privileges locally. | 16 Oct |
| CVE-2023-4004 | 7.8 high | 1.0% | linux, fedoraproject, linux_kernel, fedora, enterprise_linux | A use-after-free flaw was found in the Linux kernel's netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system. | 14 Oct |
| CVE-2026-44252 | 7.7 high | 1.0% | wazuh | Wazuh is a free and open source platform used for threat prevention, detection, and response. From 4.0.0 until 4.14.5, Wazuh Manager allows a low-privilege read-only API user with manager:read permission to retrieve the cluster key from the element in ossec.conf through GET /manager/configuration?raw=true. An attacker with network access to TCP port 1516 can use the disclosed Fernet key to impersonate a cluster worker and submit distributed API requests containing attacker-controlled rbac_permissions with rbac_mode set to black. Because the master trusts the worker-supplied authorization context, the attacker can create users, assign administrator roles, access credentials and API tokens, modify configuration, and execute actions across agents. This issue is fixed in version 4.14.5. | Tue 27 Oct |
| CVE-2026-17347 | 7.7 high | 1.0% | pgadmin, pgadmin_4 | The MASTER_PASSWORD_HOOK setting, introduced in pgAdmin 4 7.2, lets an administrator configure an external command that returns a per-user encryption key, with %u in the configured string replaced by the current user's name. The previous implementation substituted the username directly into the command string and executed the result with subprocess.Popen(..., shell=True). Because the username can originate from an external authentication source (OAuth/OIDC claims, Kerberos, webserver auth) rather than a value pgAdmin fully controls, a username containing shell metacharacters (';', '$()', backticks, pipes, '&&', newlines) allowed an authenticated user to execute arbitrary commands as the pgAdmin service account in any deployment where the configured hook string uses %u. Fix tokenises the trusted, administrator-configured hook string into an argument vector first (using shlex in POSIX-quoting mode, with backslash-escaping disabled so Windows-style paths are not mis-parsed), substitutes the untrusted username into the individual argv elements, and executes with shell=False. The username is therefore always confined to a single argv element; any shell metacharacters it contains are inert. Administrators whose MASTER_PASSWORD_HOOK previously relied on shell features (pipes, redirection, environment-variable expansion, globbing) within the hook string itself must move that logic into the invoked script, since it is no longer interpreted by a shell. This issue affects pgAdmin 4: from 7.2 before 9.17. | Fri 23 Oct |
| CVE-2026-19566 | 7.5 high | 1.0% | no CPE yet | Net::CIDR::Set versions before 0.23 for Perl allow memory exhaustion and malformed set ranges via unbounded IPv6 prefix lengths. The _encode method accepts any prefix length matching `(0|[1-9][0-9]*)` and passes it to _width2bits(), which builds the mask as `'1' x ($width + 8)`, one character per bit. The _inc() method then unpacks the packed mask into a Perl array of one scalar per byte, so the prefix length alone sets the allocation size: `::/100000000` builds a 100 MB string and a 12.5 million element array. The value being tested is parsed, not just the configured ranges: contains() builds a set from its argument, and _guess_coder() tries the IPv4 coder and then the IPv6 coder, so an IPv4-only set expands an oversized IPv6 prefix length before the mixed address width check rejects it. Any caller that passes untrusted input to contains() or add() can exhaust process memory. A prefix length above 128 is also stored as a range that does not match the requested block: 2001:db8::/129 stringifies back unchanged, contains() of its own base address returns false, and removing it from a set drops the base address while the set still prints as covering it. | 23 Oct |
| CVE-2026-48741 | 7.5 high | 1.0% | no CPE yet | libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, alternateArrayAccess in src/mms/iso_mms/server/mms_read_service.c does not validate an alternate-access sub-array range when numberOfElements is greater than zero. An out-of-range MmsValue_getElement call returns NULL, and the sub-array branch passes that value to MmsValue_isDeletable, causing a NULL pointer dereference. A remote MMS Read request can therefore crash servers whose data models contain arrays, while the single-element error path handles the same invalid index safely. This issue is fixed in version 1.6.2. | 21 Oct |
| CVE-2026-6016 | 7.4 high | 1.0% | tenda, ac9_firmware | A vulnerability was found in Tenda AC9 15.03.02.13. The affected element is the function decodePwd of the file /goform/WizardHandle of the component POST Request Handler. Performing a manipulation of the argument WANS results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. | Mon 26 Oct |
| CVE-2026-6137 | 7.4 high | 1.0% | tenda, f451_firmware | A vulnerability was detected in Tenda F451 1.0.0.7_cn_svn7958. The affected element is the function fromAdvSetWan of the file /goform/AdvSetWan. The manipulation of the argument wanmode/PPPOEPassword results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. | Mon 26 Oct |
| CVE-2026-6168 | 7.4 high | 1.0% | no CPE yet | A flaw has been found in TOTOLINK A7000R up to 9.1.0u.6115. The affected element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid5g causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. | Mon 26 Oct |
| CVE-2026-7099 | 7.4 high | 1.0% | tenda, f456_firmware | A vulnerability was detected in Tenda F456 1.0.0.5. The affected element is the function formQuickIndex of the file /goform/QuickIndex of the component httpd. Performing a manipulation of the argument mit_linktype results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. | Mon 26 Oct |
| CVE-2026-7100 | 7.4 high | 1.0% | tenda, f456_firmware | A flaw has been found in Tenda F456 1.0.0.5. The impacted element is the function fromNatlimitof of the file /goform/Natlimit of the component httpd. Executing a manipulation can lead to buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. | Mon 26 Oct |
| CVE-2026-7029 | 7.4 high | 1.0% | tenda, f456_firmware | A weakness has been identified in Tenda F456 1.0.0.5. The impacted element is the function fromaddressNat of the file /goform/addressNat. Executing a manipulation of the argument menufacturer/Go can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. | Mon 26 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.