Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-41571 | 9.4 critical | 0.00% | no CPE yet | Note Mark is an open-source note-taking application. In version 0.19.2, IsPasswordMatch in backend/db/models.go falls back to a hard-coded bcrypt("null") placeholder whenever a user has no stored password. OIDC-registered users are created with an empty password, so anyone who submits password: "null" to the internal login endpoint receives a valid session for that user. The bypass is unauthenticated and requires no user interaction. This issue has been patched in version 0.19.3. | Mon 26 Oct |
| CVE-2026-77055 | 9.3 critical | 0.00% | no CPE yet | boneIO black_debian_images gives the boneio service account excessive privileges, including full passwordless sudo access and membership in the docker group. A local attacker who compromises the boneio user can use these privileges to escalate to root. This issue was fixed in version 1.6.0: the image removes the sudoers rule and the docker group membership when it is sealed, and devices already in the field have both removed by migrations shipped with boneio 1.6.0 and applied on first start after the upgrade. Privileged operations now go through helpers that accept only a fixed set of commands, with migrations verified against Ed25519 signatures. | Mon 26 Oct |
| CVE-2026-56073 | 9.3 critical | 0.00% | no CPE yet | Cap-go before 12.128.2 contains an authentication bypass vulnerability in OTP verification that allows attackers to bypass email verification by modifying server responses. Attackers can intercept OTP verification requests and manipulate HTTP responses to falsely mark verification successful, enabling unauthorized 2FA enablement and account takeover. | Sun 25 Oct |
| CVE-2026-56081 | 9.3 critical | 0.00% | no CPE yet | Cap-go before 12.128.2 contains an authentication logic flaw that lets an attacker register and control an account bound to a victim's email address before that email is verified. By enabling two-factor authentication on the pre-registered account, the attacker gains control over the account claimed under the victim's identity, allowing them to read and modify its state and enforce organization-level policies, while the legitimate user is denied access to the account tied to their own email. | Sun 25 Oct |
| CVE-2026-75926 | 9.3 critical | 0.00% | gohugo, hugo | Hugo 0.161.0 placed the Node asset pipelines behind the Node.js permission model so that code running through PostCSS, Babel, or TailwindCSS could not reach the file system outside the project directory. Hugo 0.162.0 added tailwindcss to the AllowChildProcess default in config/security/securityConfig.go, which makes nodePermissionArgs in common/hexec/exec.go append --allow-child-process whenever the tool being launched is named tailwindcss. TailwindCSS loads the site's tailwind.config.js through require at startup, so top-level code in that file executes inside the permitted Node process and can call child_process to spawn a shell. The spawned process is not a Node process and inherits none of the permission flags, so it runs with the full privileges of the account performing the build. Building a site whose theme, module, or starter template supplies the Tailwind configuration therefore yields arbitrary command execution rather than the confined file access the permission model was introduced to enforce. Hugo 0.165.0 removes tailwindcss from the default security.exec.allow list, so the tool is no longer launched under the default configuration. | 22 Oct |
| CVE-2026-102503 | 9.3 critical | 0.00% | no CPE yet | Missing Authentication for Critical Function (CWE-306) and Missing Authorization (CWE-862) in the /libp2p-http ingress server (StartIngressServer in cmd/sam-node/node.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.2 allow an unauthenticated remote libp2p peer to bypass Biscuit capability policy enforcement and invoke arbitrary registered backend services (including command/stdio-backed MCP servers, A2A, and inference endpoints). While the MCP protocol stream handler enforces WithBiscuitAuth and Authorize checks, the parallel /libp2p-http ingress routes requests directly to backend service handlers without verifying a Biscuit token or mesh enrollment. Users should upgrade to version 0.1.0-alpha.3 or later. | 19 Oct |
| CVE-2026-76835 | 9.3 critical | 0.00% | no CPE yet | OAuth2 Proxy honours a client-supplied X-Forwarded-Uri header when deciding whether a request may skip authentication, because the guard added for CVE-2026-40575 is inert in the default reverse-proxy configuration. GetRequestURI in pkg/requests/util/util.go prefers that header over the real request URI whenever CanTrustForwardedHeaders returns true, and isAllowedPath in oauthproxy.go matches the skip_auth_routes and skip_auth_regex allow list against the resulting path. CanTrustForwardedHeaders in pkg/apis/middleware/scope.go grants that trust when the caller's address is in the trusted proxy set, and buildTrustedProxyNetSet falls back to defaultTrustedProxyIPs, which is 0.0.0.0/0 and ::/0, whenever reverse proxy mode is enabled without trusted_proxy_ip configured. Every client is therefore treated as a trusted proxy. An unauthenticated attacker can request a protected upstream path while setting X-Forwarded-Uri to a value matching an allow-listed route, so the skip-auth decision is made against the spoofed value while the upstream receives the protected path unchanged. | 13 Oct |
| CVE-2026-114493 | 9.2 critical | 0.00% | no CPE yet | LocalAI v4.6.0 through v4.11.0 contains a server-side request forgery vulnerability in core/gallery/gallery.go that validates only the initial gallery config URL. Attackers can submit a config URL through POST /models/apply that redirects to internal or cloud metadata addresses, receiving those internal responses as gallery content. | 22 Oct |
| CVE-2026-102748 | 9.2 critical | 0.00% | no CPE yet | Dgraph is an open source distributed GraphQL database. Prior to 25.4.0, Dgraph Zero registers administrative HTTP routes on port 6080 without authentication when the administrative interface is enabled. The /removeNode route accepts attacker-controlled id and group values and passes them to Server.RemoveNode, where group 0 can trigger ProposePeerRemoval. A remote unauthenticated attacker who can reach the Zero HTTP port can read topology through /state, allocate identifiers through /assign, access the exposed /moveTablet administrative route, or remove membership through /removeNode, disrupting the Zero control plane and destabilizing Alpha nodes that depend on Zero. The route registration occurs in dgraph/cmd/zero/run.go, and the demonstrated membership-removal path reaches Server.RemoveNode and ProposePeerRemoval. This issue is fixed in version 25.4.0. | 15 Oct |
| CVE-2026-108549 | 9.2 critical | 0.00% | no CPE yet | cc-connect through 1.5.0 contains a missing authentication vulnerability in the MAX platform adapter webhook mode in platform/max/max.go that accepts unauthenticated updates when no webhook_secret is configured. Remote attackers reaching the webhook listener on port 8080 can forge updates with an allowed or admin user_id to run privileged commands like /shell on the host. | 13 Oct |
| CVE-2026-118264 | 9.1 critical | 0.00% | no CPE yet | Echo is a Go web framework. From 4.0.0 until 4.16.1 and 5.4.1, Echo's Proxy middleware selects a raw tunnel from a client WebSocket upgrade request before verifying that the configured upstream accepted the upgrade. If the upstream rejects the upgrade with an ordinary keep-alive response, later HTTP requests on the connection are sent directly to that upstream without passing through Echo's router or route-specific middleware. This can bypass authentication or authorization enforced only by Echo routes, but requires an accessible proxy route, a cooperating rejected-upgrade response, and a target without independent upstream authorization. This issue is fixed in 4.16.1 and 5.4.1. | Wed 28 Oct |
| CVE-2026-105216 | 9.1 critical | 0.00% | micro, go-micro | go-micro before 6.0.0 contains an improper certificate validation vulnerability that allows network attackers to impersonate services because the shared TLS helper sets InsecureSkipVerify to true by default. Man-in-the-middle attackers can present any certificate to intercept or modify gRPC transport, HTTP and RabbitMQ broker, and Consul or etcd registry traffic, including authentication tokens and credentials. | Tue 27 Oct |
| CVE-2026-34177 | 9.1 critical | 0.00% | canonical, lxd | Canonical LXD versions 4.12 through 6.7 contain an incomplete denylist in isVMLowLevelOptionForbidden (lxd/project/limits/permissions.go), which omits raw.apparmor and raw.qemu.conf from the set of keys blocked under the restricted.virtual-machines.lowlevel=block project restriction. A remote attacker with can_edit permission on a VM instance in a restricted project can inject an AppArmor rule and a QEMU chardev configuration that bridges the LXD Unix socket into the guest VM, enabling privilege escalation to LXD cluster administrator and subsequently to host root. | Mon 26 Oct |
| CVE-2026-34179 | 9.1 critical | 0.00% | canonical, lxd | In Canonical LXD versions 4.12 through 6.7, the doCertificateUpdate function in lxd/certificates.go does not validate the Type field when handling PUT/PATCH requests to /1.0/certificates/{fingerprint} for restricted TLS certificate users, allowing a remote authenticated attacker to escalate privileges to cluster admin. | Mon 26 Oct |
| CVE-2026-40903 | 9.1 critical | 0.00% | goshs | goshs is a SimpleHTTPServer written in Go. Prior to 2.0.0-beta.6, goshs has an ArtiPACKED vulnerability. ArtiPACKED can lead to leakage of the GITHUB_TOKEN through workflow artifacts, even though the token is not present in the repository source code. This vulnerability is fixed in 2.0.0-beta.6. | Mon 26 Oct |
| CVE-2026-73501 | 9.1 critical | 0.00% | no CPE yet | kin-openapi is a Go project for handling OpenAPI files. Prior to 0.144.0, ValidationHandler.Load() in openapi3filter/validation_handler.go silently replaces a nil AuthenticationFunc with NoopAuthenticationFunc, which returns nil without checking credentials. This substitution causes every OpenAPI security requirement to be satisfied for unauthenticated requests when an application relies on ValidationHandler as its enforcement middleware. The no-op callback prevents the fail-closed ErrAuthenticationServiceMissing path from being reached and forwards the request to protected handlers that may require an API key, OAuth token, or another security scheme. This issue is fixed in version 0.144.0. | Sat 24 Oct |
| CVE-2026-62325 | 9.1 critical | 0.00% | no CPE yet | goshs is a feature-rich single-binary file server for red teamers and developers. From 2.1.3 until 2.1.4, the sftpserver/sftpserver.go password handler used Username != "" && Password != "", so running goshs with -b 'admin:' -sftp and no -fkf left both SFTP authentication handlers unset and allowed unauthenticated file access. This issue is fixed in version 2.1.4. | Fri 23 Oct |
| CVE-2026-64863 | 9.1 critical | 0.00% | no CPE yet | goshs is a feature-rich single-binary file server for red teamers and developers. Prior to 2.1.4, the httpserver/server.go wdGuard handled WebDAV MOVE as a write-only method and did not enforce --no-delete, allowing WebDAV clients to delete or overwrite files via MOVE with Overwrite: T. This issue is fixed in version 2.1.4. | Fri 23 Oct |
| CVE-2026-108267 | 9.1 critical | 0.00% | no CPE yet | Privasys Go is a maintained fork of the Go programming language that adds RA-TLS support to crypto/tls. Prior to privasys-v0.5.1-go1.26.5, challenge-mode RA-TLS certificates bound quote ReportData to the certificate public key and client nonce but not to the active TLS session. An attacker who obtained an enclave TLS private key could relay a genuine quote onto another connection, causing a relying party to accept a handshake terminated by the attacker as an attested enclave connection. This issue is fixed in privasys-v0.5.1-go1.26.5. | 16 Oct |
| CVE-2026-108269 | 9.1 critical | 0.00% | no CPE yet | Remote Attestation TLS Clients provides multi-language utilities for verifying attested TLS connections. Prior to 0.5.0, the Rust and Go RA-TLS challenge verifiers accepted quote ReportData that was bound to the certificate public key and client nonce but not to the active TLS session before permitting application traffic. An attacker who obtained an enclave TLS private key could relay a genuine quote onto another connection, causing the clients to accept an attacker-terminated connection as the attested enclave. This issue is fixed in 0.5.0. | 16 Oct |
| CVE-2026-12681 | 8.9 high | 0.00% | no CPE yet | Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Google go-attestation. parseEfiSignatureList() does not advance the buffer past vendor bytes before reading entries. For hashSHA256SigGUID lists, this allows attacker-controlled vendor header bytes to be appended to the trusted SHA256 hash list. A crafted TPM event log could inject arbitrary SHA256 hashes into the verifier's trusted measurement database, enabling a remote attestation verifier to accept a compromised boot state. This issue affects go-attestation: through 0.6.0. | Sun 25 Oct |
| CVE-2026-40611 | 8.8 high | 0.00% | no CPE yet | Let's Encrypt client and ACME library written in Go (Lego). Prior to 4.34.0, the webroot HTTP-01 challenge provider in lego is vulnerable to arbitrary file write and deletion via path traversal. A malicious ACME server can supply a crafted challenge token containing ../ sequences, causing lego to write attacker-influenced content to any path writable by the lego process. This vulnerability is fixed in 4.34.0. | Mon 26 Oct |
| CVE-2026-103090 | 8.8 high | 0.00% | no CPE yet | Missing Authentication for Critical Function (CWE-306) and Insufficiently Protected Credentials (CWE-522) in the control plane enrollment status handler (HandleEnrollStatus at GET /enroll/status in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow an unauthenticated remote attacker to retrieve an approved bootstrap-enrolled peer's signed Biscuit identity token by supplying a peer_id obtainable from the unauthenticated GET /info endpoint. A related flaw in POST /enroll allowed any bootstrap-token holder to re-fetch another peer's credential. An attacker can replay the disclosed Biscuit token as a bearer credential on /policies to read mesh authorization policies and on /routers/lease to overwrite advertised router multiaddrs. Users should upgrade to version 0.1.0-alpha.9 or later, which requires cryptographic proof of possession of the enrollment private key on credential-releasing endpoints, enforces rate limiting, and validates router lease addresses. | 22 Oct |
| CVE-2026-104795 | 8.8 high | 0.00% | no CPE yet | The insights-runtime-extractor runs as a privileged DaemonSet (`hostPID: true`) that scans container processes for runtime fingerprinting. When scanning a container, the coordinator: 1. **fork()s** a child process 2. **setns()** into the target container's PID and mount namespaces 3. **fchdir()** back to an orphaned FD pointing at the extractor's own root filesystem (where `/crio.sock` is hostPath-mounted) 4. Calls **only `seteuid(target_uid)`** — changing the effective UID but leaving the **real UID and saved-set-UID at 0** and **retaining the permitted capability set** 5. The `check_no_privileged_perms()` guard inspects only the Effective capability set (so it passes), and is **skipped entirely when the target runs as uid 0** 6. The `VersionExecutable` fingerprint invokes `fpr_kind_executable` with `process.command_line[0]` — the target's argv[0], read from `/proc/<pid>/cmdline` and **fully controlled by the workload** 7. `fpr_kind_executable` calls `exec.Command(executable, "--version").Output()` — executing the **workload's own binary** inside the workload's mount namespace while **ruid=0 in the host user namespace** The executed process can call `setuid(0)` to restore full root with `CAP_SYS_ADMIN`, and inherits the orphaned cwd which resolves into the extractor container's filesystem containing the host CRI-O socket. ## Affected Code ### 1. Insufficient privilege drop (Rust — extractor coordinator) **File:** `extractor/src/insights_runtime_extractor.rs` ```rust // Lines 139-146 — seteuid-only drop, guard skipped for root containers join_process_namespaces(process.pid)?; change_dir(current_dir); switch_user(*process.uid)?; if *process.uid != 0 { perms::check_no_privileged_perms() .expect("Must not have privileged permissions to run fingerprints"); } fingerprint::run_fingerprints(&config, out_dir, &process); ``` ```rust // Lines 182-185 — only effective UID changed; ruid/suid stay 0 fn switch_user(uid: u32) -> Result<(), ScannerError> { debug!("... Becoming user: {uid}"); seteuid(uid.into()).map_err(|e| ScannerError::Errno(e)) } ``` ### 2. Execution of untrusted binary (Go — fingerprint) **File:** `fingerprints/pkg/utils/file.go` ```go // Lines 75-80 — executes a path taken verbatim from workload's argv[0] func GetExecutableVersionOutput(executable string) (string, error) { out, err := exec.Command(executable, "--version").Output() if err != nil { return "", err } return string(out), nil } ``` ### 3. Workload-controlled path forwarded (Rust — version_executable) **File:** `version_executable.rs` ```rust // Lines 29-34 — workload-controlled command_line[0] forwarded to fingerprint return Some(vec![ fpr_kind_executable, out_dir.to_string(), String::from(&process.command_line[0]), String::from(&version_executable.runtime_kind_name), ]); ``` ## Attack Pattern **Attacker:** Any tenant able to schedule a pod (unprivileged, any namespace) **Victim:** The node running the insights-runtime-extractor DaemonSet **Trigger:** Automatic — the DaemonSet scans all container processes on the node **Attack sequence:** 1. Attacker creates a pod whose process name matches a configured versioned-executable pattern (`node`, `python`, `python3`, `MainThread`, or contains `java`) 2. The pod's main binary (at the path matching argv[0]) is a malicious executable that calls `setuid(0)` to restore root 3. When the insights operator triggers a scan, the DaemonSet forks, enters the attacker's mount namespace, and executes the attacker's binary with ruid=0 4. The attacker's code regains full root with `CAP_SYS_ADMIN` in the host user namespace 5. The inherited cwd contains the host CRI-O socket → full node compromise | 20 Oct |
| CVE-2026-96627 | 8.8 high | 0.00% | no CPE yet | Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to 2.6.0, UpdateUser in backend/api/handlers/users.go sets PasswordHash for any target without comparing caller and target privilege. A holder of delegated users:update permission can submit a password change for the global administrator, replace the administrator password, and authenticate as that account, resulting in complete global administrator account takeover. This issue is fixed in version 2.6.0. | 19 Oct |
| CVE-2026-74691 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Tear down DMA paths before stopping the rings tbnet_tear_down() stops both rings and frees their frame buffers before calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's descriptor base and tbnet_free_buffers() unmaps and frees the pages the frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's 'pending' bit, anything still in flight has nowhere to drain to. The teardown sequence has been in this order since the driver was added. The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable DMA paths only after rings are enabled") moved the path enable to the end of tbnet_connected_work() and documented why: /* Both logins successful so enable the rings, high-speed DMA * paths and start the network device queue. * * Note we enable the DMA paths last to make sure we have primed * the Rx ring before any incoming packets are allowed to * arrive. */ Teardown was never updated to match, so the rings and the paths now come down in the same order they go up instead of in reverse. On an ASMedia ASM4242 host router the 'pending' bit then never clears: every teardown burns the full 500 ms timeout and __tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to 5 s does not help, so the hop is not slow to drain, it never drains at all. The failure is invisible above the thunderbolt core. __tb_path_deactivate_hops() is void and only calls tb_port_warn(); tb_path_deactivate(), tb_tunnel_deactivate() and __tb_disconnect_xdomain_paths() are void as well, and tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So tb_xdomain_disable_paths() reports success and the netdev_warn() below it never fires. Repeated teardowns eventually take the XDomain control channel down, after which the peer node is gone and only a power cycle brings the controller back. Deactivating the paths first fixes it. Measured with kretprobes on a stock v6.17 tree with no other patches applied, on a link that was up and had just carried traffic: before: __tb_path_deactivate_hop() returns 0 for the first hop, then -ETIMEDOUT for the second 500335 us later after: 0 for both, 525 us apart Alternating the two orderings ABBA over three load levels, four teardowns per arm: every teardown failed before the change (21 of 21 that ran), none failed after (0 of 24). The before arms ran short because the link died partway through. The same split shows up when the interface is enslaved to a bond instead of just brought down, which is how I ran into this in the first place. Throughput and latency after the change are unchanged. Hosts whose routers drain the hop despite the stale descriptor base see no functional difference, since the paths end up deactivated either way. | 14 Oct |
| CVE-2026-84317 | 8.8 high | 0.00% | no CPE yet | Nginx UI is a web user interface for the Nginx web server. Prior to 2.4.1, internal/config/validation.go (ValidateConfigFile) is a security control that blocks dangerous nginx directives — js_*, perl_*, load_module of the njs/perl modules, and user root. It is enforced on three of the four config-write paths: api/config/add.go, api/config/modify.go, and mcp/config/config_modify.go. The fourth path — the MCP tool nginx_config_add (mcp/config/config_add.go) — does NOT call it: it writes the caller-supplied content straight to disk and reloads nginx. An authenticated MCP caller (or an MCP agent induced via prompt injection) can therefore inject exactly the directives the control is meant to block, leading to nginx code execution on deployments where the njs/perl module is available (e.g. the official Docker image). This issue is fixed in version 2.4.1. | 13 Oct |
| CVE-2026-119028 | 8.7 high | — | oapi-codegen | oapi-codegen 2.0.0 before 2.8.1 contains a code injection vulnerability that allows attackers to inject Go code by supplying non-literal enum entries in integer, number, or boolean schemas. Attackers controlling an OpenAPI document can craft an enum entry that closes the const block in constants.tmpl and injects a func init(), executing code when the generated package is built and imported. | 22 h ago |
| CVE-2026-40876 | 8.7 high | 0.00% | goshs | goshs is a SimpleHTTPServer written in Go. Prior to 2.0.0-beta.6, goshs contains an SFTP root escape caused by prefix-based path validation. An authenticated SFTP user can read from and write to filesystem paths outside the configured SFTP root, which breaks the intended jail boundary and can expose or modify unrelated server files. The SFTP subsystem routes requests through sftpserver/sftpserver.go into DefaultHandler.GetHandler() in sftpserver/handler.go, which forwards file operations into readFile, writeFile, listFile, and cmdFile. All of those sinks rely on sanitizePath() in sftpserver/helper.go. helper.go uses a raw string-prefix comparison, not a directory-boundary check. Because of that, if the configured root is /tmp/goshsroot, then a sibling path such as /tmp/goshsroot_evil/secret.txt incorrectly passes validation since it starts with the same byte prefix. This vulnerability is fixed in 2.0.0-beta.6. | Mon 26 Oct |
| CVE-2026-56082 | 8.7 high | 0.00% | no CPE yet | Capgo (Cap-go/capgo) before 12.128.2 contains an improper access control vulnerability in the SECURITY DEFINER PostgREST RPC function public.record_build_time, which is granted to the anon role and callable with only the public Supabase publishable (sb_publishable_*) anon key. An unauthenticated attacker can insert rows into public.build_logs for arbitrary organizations and, because the function uses ON CONFLICT (build_id, org_id) DO UPDATE, can overwrite existing usage/billing records by reusing the same build_id for a target org. This enables cross-tenant tampering of billing build logs and financial-impact denial of service by inflating billable build time. | Sun 25 Oct |
| CVE-2026-56248 | 8.7 high | 0.00% | no CPE yet | Cap-go capgo (capgo-backend) before 12.128.12 contains an unauthenticated denial-of-service vulnerability arising from the audit_logs table's Row-Level Security (RLS) policy when accessed via the Supabase PostgREST API. Because the PostgreSQL query planner executes costly logic before RLS rejection, unfiltered queries to the public.audit_logs endpoint using the public anon key consistently trigger statement timeouts (PostgREST error 57014). Under concurrency, this exhausts database resources and causes cascading HTTP 500 failures on unrelated endpoints (e.g. /orgs), resulting in an application-layer denial of service. | Sun 25 Oct |
| CVE-2026-56115 | 8.7 high | 0.00% | bootimus | Bootimus through 0.1.70 contains a broken access control vulnerability that allows authenticated low-privileged users to perform administrative actions by exploiting missing role enforcement in the JWTMiddleware function in internal/auth/auth.go, which validates JWT tokens and account status but fails to inspect the is_admin flag. Attackers can send requests to any endpoint under the /api/users path to create new administrator accounts or reset administrator passwords, thereby gaining full control of the server and the ability to modify boot menus and installation scripts served to PXE clients. | Sun 25 Oct |
| CVE-2026-58165 | 8.7 high | 0.00% | no CPE yet | OpenZiti through 2.0.0, fixed in commit 3027fdf, contains a privilege escalation vulnerability that allows authenticated non-admin identities with fine-grained enrollment management permissions to create enrollments for any identity, including the default administrator, because the ApplyCreate function in controller/model/enrollment_manager.go verifies only that the target identity exists without performing authorization checks binding the caller to the target identity. Attackers can redeem the resulting one-time token through the unauthenticated client API enrollment endpoint to obtain a client certificate authenticating as the targeted admin identity, yielding full administrative control of the controller and the zero-trust overlay it manages. | Sun 25 Oct |
| CVE-2026-56226 | 8.7 high | 0.00% | no CPE yet | Capgo (Cap-go/capgo) before 12.128.2 exposes the Supabase PostgREST RPC function public.get_orgs_v6(userid uuid), which is SECURITY DEFINER and granted to the anon role, allowing unauthenticated access. Because the function accepts a caller-supplied user UUID without verifying it matches the authenticated user, an attacker using only the public publishable API key can query POST /rest/v1/rpc/get_orgs_v6 with an arbitrary user UUID to retrieve that user's organization membership, roles, subscription/trial metadata, and management_email (PII). | Sun 25 Oct |
| CVE-2026-56339 | 8.7 high | 0.00% | no CPE yet | Capgo (Cap-go/capgo) before 12.128.2 contains an information disclosure vulnerability in the Supabase PostgREST SECURITY DEFINER RPC function public.rescind_invitation that allows unauthenticated attackers to enumerate organization existence. The function returns distinct error messages (NO_ORG vs NO_RIGHTS) when called with only a publishable API key, enabling attackers to discover valid organization IDs and increase the attack surface for targeted phishing or social engineering campaigns. | Sat 24 Oct |
| CVE-2026-44174 | 8.7 high | 0.00% | no CPE yet | Kirby is an open-source content management system. Prior to 4.9.1 and 5.4.1, Kirby did not validate the model attributes that were used in its collection queries, allowing attackers to include arbitrary model methods in their queries. This includes methods with sensitive data such as password() (disclosing the password hash) or root() (disclosing the absolute filesystem path on the server) as well as methods that perform impactful actions such as loginPasswordless() (causing a privilege escalation to another user) or delete() (deleting all queried models in one go if the authenticated user has appropriate permissions). This issue has been fixed in versions 4.9.1 and 5.4.1. | Sat 24 Oct |
| CVE-2026-73500 | 8.7 high | 0.00% | no CPE yet | etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a network attacker who can reach an etcd TLS listener can open many TCP connections and never send a ClientHello. In client/pkg/transport/listener_tls.go, each connection handled by tlsListener.acceptLoop spawns a goroutine that blocks indefinitely inside tls.Conn.Handshake() and remains tracked in the pending map. Unbounded goroutine and map growth can exhaust memory in the etcd process, causing loss of availability for the cluster and, when etcd backs Kubernetes, the control plane. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. | Sat 24 Oct |
| CVE-2026-47722 | 8.7 high | 0.00% | no CPE yet | nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.2, `internal/configgen/generator.go:86,108,119` interpolates the operator-supplied `ListenHost` and `TunDevice` fields raw into a `text/template` that produces the agent's `config.yml`. `internal/web/advanced.go:20-35` accepts both with only `strings.TrimSpace` — no character or shape validation. Version 0.3.2 fixes the issue. | Sat 24 Oct |
| CVE-2026-74904 | 8.7 high | 0.00% | no CPE yet | SiYuan before v3.7.4 is missing authorization checks in 17 block metadata/content endpoints in kernel/api/block.go (including getRefText, checkBlockExist, and getBlockBreadcrumb). These handlers are gated only by basic authentication (model.CheckAuth) and lack publish-access filtering, allowing anonymous publish-mode readers to disclose private block content-derived text, structural metadata, and existence information for arbitrary block IDs across the workspace. | 22 Oct |
| CVE-2026-105299 | 8.7 high | 0.00% | no CPE yet | Summary Before version 0.9.0, the HTTP/1 upstream path in pingora-proxy passed the downstream request through upstream_request_filter and wrote it to the upstream without removing the client's Connection header, other hop-by-hop headers, or the headers Connection nominated, although RFC 9110 Section 7.6.1 requires intermediaries to remove them. The HTTP/2 upstream path already removed Connection and related HTTP/1-specific headers. A client could therefore nominate a header that the application adds in upstream_request_filter (for example, Connection: keep-alive, X-Forwarded-For). A downstream HTTP/1 intermediary that honors Connection would then strip the Pingora-added header before it reached the origin. Impact Specifically affects chained deployments where an HTTP/1 intermediary between Pingora and the origin processes Connection nominations (for example, Go's net/http/httputil.ReverseProxy) and the origin trusts headers added by that intermediary (for example, X-Forwarded-For for IP-based authorization). A remote, unauthenticated attacker can have those headers removed, potentially bypassing authorization. The reporter demonstrated access to an IP-restricted endpoint using X-Forwarded-For for IP validation on the origin. This is the same class of issue as CVE-2022-31813 in Apache HTTP Server. Note that Cloudflare CDN customers were unaffected, as no such chained deployment as described above exists with internal Pingora services, and Connection headers are sanitized before arriving at Pingora gateways. Mitigation: * Upgrade to pingora 0.9.0 or later. By default, Pingora now removes hop-by-hop and Connection-nominated headers from upstream requests, and rejects requests whose Connection header nominates Host, X-Forwarded-For, X-Forwarded-Host, X-Forwarded-Proto, or a pseudo-header. This is controlled by PeerOptions::http_upstream_request_policy (HttpUpstreamRequestPolicy). Fix commits: https://github.com/cloudflare/pingora/commit/28c18e6b6b04dd0bd937234e5950049e6d74cded , https://github.com/cloudflare/pingora/commit/ca23f1668eca8e78be7ba62ef0edbd458b40eeee * Do not use HttpUpstreamRequestPolicy::preserve() if the origin relies on headers added by Pingora; it restores the old passthrough behavior. * If you cannot upgrade: in upstream_request_filter, remove the Connection header and every header it nominates before adding trusted headers. | 20 Oct |
| CVE-2026-77935 | 8.7 high | 0.00% | no CPE yet | Coze Studio through 0.5.1 contains an insecure direct object reference vulnerability in workflow.go that allows authenticated users to access other spaces' workflows by supplying foreign workflowIDs. Attackers can pair their own spaceID with another tenant's workflowID in save, update_meta, batch_delete, canvas, test_run and nodeDebug routes to read, run, overwrite or delete workflows. | 20 Oct |
| CVE-2026-107211 | 8.7 high | 0.00% | excelize | Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.8.1 to 2.11.0, separately parsed pivot-table field indices are used to index the pivot-cache field-name slice without bounds checks. extractPivotTableFields uses getPivotCacheFieldsName output while processing GetPivotTables and trusts the dataField fld attribute as an index. When a crafted workbook supplies a pivot-field count mismatch or an out-of-range dataField fld value before GetPivotTables is called, the unchecked index causes a Go slice-bounds panic that escapes the library, allowing an attacker to crash the process or request worker. No fixed version is available as of this review. | 13 Oct |
| CVE-2026-107213 | 8.7 high | 0.00% | excelize | Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.9.0 to 2.11.0, GetSlicers checks for ExtLst but dereferences ws.Drawing without checking whether the independently optional drawing element exists. File.GetSlicers reads ws.Drawing.RID after seeing a worksheet extLst element even when the independently optional worksheet drawing element is absent. When a crafted worksheet contains an extLst element without a drawing element and the application calls GetSlicers, the nil ws.Drawing pointer is dereferenced while resolving the drawing relationship, allowing an attacker to panic and terminate an unprotected process. No fixed version is available as of this review. | 13 Oct |
| CVE-2026-76847 | 8.7 high | 0.00% | no CPE yet | act starts an HTTP Artifacts V4 backend whenever a workflow uses actions/upload-artifact@v4 or actions/download-artifact@v4. The control-plane RPCs of that backend, including CreateArtifact, GetSignedArtifactURL, ListArtifacts, FinalizeArtifact and DeleteArtifact, accept a caller-supplied workflow_run_backend_id and never check that it belongs to the requester: validateRunIDV4 in pkg/artifacts/artifacts_v4.go parses the value and returns it with the comparison against the requesting task's run ID left commented out. The signed URLs the backend issues are authenticated by an HMAC whose key is hardcoded to the four bytes 0xba 0xdb 0xee 0xf0, identical in every build, computed over a concatenation of endpoint, expiry, artifact name and task ID with no length prefix or delimiter, so signatures are both forgeable and ambiguous between differing artifact name and task ID pairs. The --artifact-server-addr flag defaults to the host's outbound address rather than loopback, leaving the backend reachable from the surrounding network. Any client that can reach it may read, overwrite or delete the artifacts of a concurrently running job with no credentials, exposing build outputs such as secrets and deployment credentials and permitting their replacement before the owning job consumes them. | 12 Oct |
| CVE-2026-11401 | 8.6 high | 0.00% | no CPE yet | An untrusted search path issue in the GlobalDatabasePlugin in the AWS Advanced Go Wrapper for Amazon Aurora PostgreSQL will allow a remote authenticated low-privilege actor to escalate privileges to those of another Amazon RDS user, including rds_superuser, via a crafted function created by the actor that runs when that user connects to the cluster through the affected wrapper. To remediate this issue, users should upgrade to the AWS Advanced Go Wrapper release 2026-05-26 | Mon 26 Oct |
| CVE-2026-63637 | 8.6 high | 0.00% | no CPE yet | Dgraph is an open source distributed GraphQL database. Prior to 25.3.8, maybeQuoteArg in graphql/resolve/query_rewriter.go passes regexp filter strings into generated DQL without quoting or validating the /pattern/flags form, allowing crafted GraphQL query or mutation filters to inject DQL operators, disclose unintended nodes, or expand modification and deletion targets. This issue is fixed in version 25.3.8. | Sat 24 Oct |
| CVE-2026-111639 | 8.6 high | 0.00% | no CPE yet | bbs-go through 4.4.6 contains an authentication bypass vulnerability in the /api/login/google_one_tap endpoint that allows remote attackers to log in as other users by submitting Google ID tokens issued to any OAuth client. Attackers operating their own Google OAuth client can capture a victim's Google-signed ID token and replay it, since the aud claim is never checked, to obtain an authenticated session as the victim's Google-linked account. | 21 Oct |
| CVE-2026-96626 | 8.5 high | 0.00% | no CPE yet | Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to 2.5.0, UpdateRegistry and TestRegistry in backend/api/services/container_registry_service.go allow the registry URL to change while preserving the stored encrypted token. When a holder of registries:update and registries:test repoints a generic registry URL without supplying a replacement token, TestRegistry decrypts the preserved token and RegistryLogin sends it to the attacker-controlled host because normalizeRegistryServerAddressInternal does not restrict the destination. This exposes the stored container-registry PAT or password and can enable image access or tampering. This issue is fixed in version 2.5.0. | Wed 28 Oct |
| CVE-2026-59185 | 8.5 high | 0.00% | no CPE yet | identrail is a machine identity security platform for AWS, GitHub/OIDC, and Kubernetes. Prior to 1.0.2, the default-on `POST /v1/workspaces/:workspace_id/projects/:project_id/github/connect/complete` endpoint in `internal/api/router.go` accepts `installation_id` from the request body or `X-GitHub-Installation-ID` header without verifying the installation belongs to the caller's workspace. `CompleteGitHubConnection` in `internal/api/github_connect.go` rigorously binds `state` to the caller's tenant, workspace, and project, but checks only that the installation ID is positive before persisting it as the caller's connection. `ListInstallationRepositories` in `internal/connectors/github/repositories.go` invokes token creation through `internal/connectors/github/app.go` and `POST /app/installations/{installationId}/access_tokens`, using the application's JWT. An authenticated tenant who starts a legitimate connection can supply another customer's non-secret installation ID to read the victim organization's private repository inventory, content, and metadata or drive posture scans, provided identrail's GitHub App is installed there. The default-off V2 `CompleteGitHubConnector` path shares the installation-ownership gap and additionally matches pending `state` without rechecking caller scope. This issue is fixed in version 1.0.2. | Wed 28 Oct |
| CVE-2026-51583 | 8.5 high | 0.00% | no CPE yet | An issue in usememos through v0.30.0 allows a remote authenticated attacker to perform Server-Side Request Forgery (SSRF) via the Webhook validation mechanism in internal/webhook/validate.go, by setting a webhook target to an internal address. | Sat 24 Oct |
Download these 633 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.