Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-68398exploit | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path: l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv() -> ppp_input(&po->chan) It runs under rcu_read_lock() holding only an l2tp_session reference and takes NO reference on the internal PPP channel (struct channel, chan->ppp) that ppp_input() dereferences. The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel are RCU-safe. But the internal struct channel is a separate allocation that ppp_release_channel() frees with a plain kfree(): close(data socket) -> pppol2tp_release() -> pppox_unbind_sock() -> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch) For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit (no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips both ppp_disconnect_channel()'s synchronize_net() and ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace period. rcu_read_lock() in pppol2tp_recv() does not protect against a plain kfree(), so an in-flight ppp_input() on one CPU can dereference the channel just freed by close() on another CPU. The bug is reachable by an unprivileged user. Defer the channel free to an RCU callback via call_rcu() so the grace period fences any in-flight ppp_input(). The disconnect and unbridge teardown paths already fence with synchronize_net()/synchronize_rcu(); call_rcu() does the same here without stalling the close() path. | 19 Oct |
| CVE-2026-68138exploit ×3 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: serialize qdisc_rtab_list against concurrent get/put qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no lock. This was only safe because every caller historically held the RTNL mutex, which serialized all rate-table lookups, inserts and frees. That invariant no longer holds. cls_flower sets TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() -> tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each adding a flower filter with a police action carrying the same rate, then race on qdisc_rtab_list and on the non-atomic refcnt, leading to a use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table. qdisc_rtab_list is a single global (not per-netns), so the corrupted object is shared system-wide. BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160 qdisc_put_rtab+0x12f/0x160 tcf_police_init+0xda9/0x1590 tcf_action_init_1+0x460/0x6b0 tcf_action_init+0x439/0xa40 tcf_exts_validate_ex+0x42d/0x550 fl_change+0xddd/0x7da0 tc_new_tfilter+0xaa7/0x2420 rtnetlink_rcv_msg+0x95e/0xe90 which belongs to the cache kmalloc-2k of size 2048 Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The (sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before taking the lock; if a concurrent inserter added an identical table in the meantime the freshly allocated one is freed under the lock, so no duplicate is leaked. qdisc_put_rtab() now decrements the refcount and unlinks under the same lock. | 19 Oct |
| CVE-2026-68121exploit ×3 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset after device header creation. pskb_expand_head() updates that offset when it relocates the head. | 19 Oct |
| CVE-2026-64563exploit | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: rhashtable: clear stale iter->p on table restart rhashtable_walk_start_check() has two restart paths when resuming a walk. When iter->walker.tbl is valid, it re-validates iter->p against the table and sets iter->p = NULL if the object is gone. When iter->walker.tbl is NULL (table was freed during resize), it resets slot and skip but forgets to clear iter->p. rhashtable_walk_next() then dereferences the stale iter->p, reading freed memory. This is a use-after-free. Any caller that does multi-fragment rhashtable walks across walk_stop/walk_start boundaries is affected. Concrete cases include netlink_diag (__netlink_diag_dump in net/netlink/diag.c) and TIPC (tipc_nl_sk_walk in net/tipc/socket.c). Crash stack (netlink_diag): BUG: KASAN: slab-use-after-free in rhashtable_walk_next+0x365/0x3c0 Read of size 8 at addr ffff88801a9d2438 (freed kmalloc-2k, offset 1080) Call Trace: rhashtable_walk_next+0x365/0x3c0 (lib/rhashtable.c:1016) __netlink_diag_dump+0x160/0x760 (net/netlink/diag.c:122) netlink_diag_dump+0xc2/0x240 netlink_dump+0x5bc/0x1270 netlink_recvmsg+0x7a3/0x980 sock_recvmsg+0x1bc/0x200 __sys_recvfrom+0x1d4/0x2c0 | 19 Oct |
| CVE-2026-64531exploit ×4 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject oversized nested action attrs Open vSwitch stores generated flow actions as nlattrs, whose nla_len field is u16. Commit a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") allowed the total sw_flow_actions stream to grow beyond 64 KiB, which is valid, but also removed the last guard preventing a generated nested action attribute from exceeding U16_MAX. An oversized generated container can thus be closed with a truncated nla_len. A later dump or teardown then walks a structurally different stream than the one that was validated. In particular, an oversized nested CLONE/CT action may cause subsequent bytes in the generated stream to be interpreted as independent actions. Keep the larger total-action-stream behavior, but make nested action close reject generated containers that do not fit in nla_len, and return the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse construction order before discarding failed wrappers, so resources copied into the rejected tails are released before the wrappers are removed. Most failed outer wrappers are discarded by truncating actions_len after child resources have been released. CHECK_PKT_LEN also trims its parent after branch resources are gone. SET/TUNNEL close failures unwind their known tun_dst ownership directly, and SET_TO_MASKED has no external ownership and truncates on close failure. | 19 Oct |
| CVE-2026-52943exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put(). | 19 Oct |
| CVE-2026-52923exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. | 19 Oct |
| CVE-2026-52910exploit ×2 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated--- | 19 Oct |
| CVE-2026-46275exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. | 19 Oct |
| CVE-2026-43494exploit ×7 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user(). | 19 Oct |
| CVE-2026-43074exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: eventpoll: defer struct eventpoll free to RCU grace period In certain situations, ep_free() in eventpoll.c will kfree the epi->ep eventpoll struct while it still being used by another concurrent thread. Defer the kfree() to an RCU callback to prevent UAF. | 19 Oct |
| CVE-2026-31525exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs(). | 19 Oct |
| CVE-2026-23415exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: futex: Fix UaF between futex_key_to_node_opt() and vma_replace_policy() During futex_key_to_node_opt() execution, vma->vm_policy is read under speculative mmap lock and RCU. Concurrently, mbind() may call vma_replace_policy() which frees the old mempolicy immediately via kmem_cache_free(). This creates a race where __futex_key_to_node() dereferences a freed mempolicy pointer, causing a use-after-free read of mpol->mode. [ 151.412631] BUG: KASAN: slab-use-after-free in __futex_key_to_node (kernel/futex/core.c:349) [ 151.414046] Read of size 2 at addr ffff888001c49634 by task e/87 [ 151.415969] Call Trace: [ 151.416732] __asan_load2 (mm/kasan/generic.c:271) [ 151.416777] __futex_key_to_node (kernel/futex/core.c:349) [ 151.416822] get_futex_key (kernel/futex/core.c:374 kernel/futex/core.c:386 kernel/futex/core.c:593) Fix by adding rcu to __mpol_put(). | 19 Oct |
| CVE-2026-23001exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/[email protected]/T/#u | 19 Oct |
| CVE-2026-98260exploit ×17 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: exec: Cleanup POSIX timers right after de_thread() A per-thread CPU timer holds a reference to the PID of the thread it is attached to and, while it is armed, its node is queued in that thread's posix_cputimers. The task is looked up by that PID. When a non-leader thread exec()s, de_thread() changes which task owns that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL, but the node is still queued on tsk, which is alive. timer_lock_sighand() takes a failed lookup to mean that the node is already dequeued, so it has nothing to undo. begin_new_exec() calls posix_cpu_timers_exit(me) right after exec_task_namespaces() and that removes the leftover node, so the state normally stays invisible. But bprm->point_of_no_return is set before de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or exec_task_namespaces() fails, the task dies before it gets there. exit_itimers() then frees the k_itimer while its node is still queued, and reaping tsk later erases that freed node from the rbtree. In short: the non-leader thread B the parent timer_create(CLOCK_THREAD_CPUTIME_ID) timer_settime() arm_timer() // the node is queued on B execve() de_thread(B) exchange_tids(B, leader) // B's PID now belongs to the leader release_task(leader) __exit_signal(leader) posix_cpu_timers_exit(leader) // cleans leader's queue, not B's __unhash_process(leader) // that PID has no task anymore exec_mmap() mmap_read_lock_killable(old_mm) kill(B, SIGKILL) // -EINTR get_signal() do_exit() exit_itimers() posix_timer_delete() posix_cpu_timer_del() posix_timer_unhash_and_free() // freed while still queued wait4() release_task(B) posix_cpu_timers_exit(B) cleanup_timerqueue() timerqueue_del() // use-after-free Move the POSIX timer cleanup right after de_thread() before any of the later failure conditions brings the task into do_exit(). [ tglx: Move the cleanup right after de_thread() ] | 19 Oct |
| CVE-2026-98256exploit ×2 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: signal: Prevent exec() race Hyunwoo debugged the following KASAN UAF splat: BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0 Write of size 8 at addr ffff888007ed80c8 by task poc/79 ... Call Trace: __send_signal_locked+0xb27/0xba0 do_send_sig_info+0xa7/0x160 do_send_specific+0x76/0xa0 __x64_sys_tgkill+0x193/0x270 ... Allocated by task 80: do_timer_create+0x1a4/0x1030 __x64_sys_timer_create+0x145/0x190 ... Freed by task 12: kmem_cache_free_bulk+0x1f8/0x4a0 kvfree_rcu_bulk+0x14f/0x1c0 kfree_rcu_work+0x128/0x1a0 ... Last potentially related work creation: kvfree_call_rcu+0x39/0x390 __flush_itimer_signals+0x211/0x320 flush_itimer_signals+0x47/0x90 begin_new_exec+0xa6b/0x28c0 It turned out that this happens with a non-leader exec() as Hyunwoo explained: de_thread() calls exchange_tids() before release_task(leader), so the struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid now points to the thread which called execve(). pid_task() returns that thread and lock_task_sighand() on it succeeds. If the timer signal is blocked, its sigqueue stays queued on the leader's task::pending. The next expiry of that timer can then run while release_task() flushes the queue. posixtimer_send_sigqueue() checks whether the sigqueue is already queued with a plain list_empty(), which only reads list_head::next. list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next before list_head::prev, so the check can pass in between. list_add_tail() queues the entry on the task::pending of the live thread, and the list_head::prev store from the flush then overwrites the list_head::prev link that list_add_tail() has just set. __flush_itimer_signals() does not undo that either. With list_head::prev pointing at the entry itself, its list_del_init() only stores the same values again, so the entry is not removed from the list. It is still there after the last reference is dropped and the timer is freed by RCU, and the list_add_tail() of a later tgkill() follows that list_head::prev into the freed timer. This problem surfaced with the recent commit which moved the sigqueue flush out of the sighand lock held region. Hyonwoo proposed to fix this by using list_del_init_careful(), but that just papers over the problem. After some disucssions and various attempts to solve it, Eric pointed out that there is no reason to flush task::pending late in release_task() and it should be done in exit_signals() already. As nothing can collect and deliver signals which are queued in a dying task's pending queue, there is no reason to delay it further. But it has to be ensured that no signals can be queued into it after that point. exit_signals() sets PF_EXITING in task::flags, which can be used as an indicator for this. Cure it by: - Preventing signal queueing for task private signals (PIDTYPE_PID) when the task has PF_EXITING set in __send_signal_locked() and in posixtimer_send_sigqueue(). - Protecting the unlocked setting of PF_EXITING in exit_signals() for the task group empty and the group exit case with sighand lock - Flushing task::pending signals right there. Optimize that by moving the whole pending list to an on-stack list head under sighand lock and free the signals without the lock held. There has been quite some discussion about the lockless flush and the non-leader exec case on weakly ordered systems. The problem is that a third party which tries to send a posix timer signal relies on the PID lookup to find the target task and that lookup might result in the new leader when the signal was originaly directed to the old leader. In case that the signal was queued on the old leader then the lockless flush raised a concern over the following situation: old_leader new_leader third party A: flush_list() // list_del_in ---truncated--- | 19 Oct |
| CVE-2026-97941exploit | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely. | 19 Oct |
| CVE-2026-89754exploit | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix stale walk->action escaping walk_pmd_range() If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none() check is retried. The PMD entry may be cleared at the point of retry. In this case, if walk->ops->install_pte is not specified, the code continues to the next PMD entry in the range without resetting walk->action to ACTION_SUBTREE. This leaves walk->action erroneously set to ACTION_AGAIN, which is incorrect. This was incorrect but not problematic up until commit 3b89863c3fa4 ("mm/pagewalk: fix race between concurrent split and refault") which updated walk_pud_range() to check for walk->action == ACTION_AGAIN upon walk_pmd_range()'s return, causing the PUD walk to be retried. In this case this results in duplicate walk callbacks being invoked, which is erroneous and will break any caller that is not idempotent with respect to this (and waste time for those which are). The result is an out-of-bounds write, triggered by a local fuzzer: [ 2.272695] ================================================================== [ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_range+0x14f/0x190 [ 2.274302] Write of size 1 at addr ffff888008d9b000 by task poc/106 [ 2.274966] [ 2.275154] CPU: 0 UID: 1000 PID: 106 Comm: poc Not tainted 7.2.0-rc6-00429-ga7c7074b58d2 #55 PREEMPT(lazy) [ 2.275159] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.275164] Call Trace: [ 2.275170] <TASK> [ 2.275172] dump_stack_lvl+0x53/0x70 [ 2.275200] print_report+0xd0/0x630 [ 2.275210] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.275219] ? irqentry_exit+0xd2/0x670 [ 2.275224] ? irqentry_exit+0xd2/0x670 [ 2.275226] ? __virt_addr_valid+0xef/0x1a0 [ 2.275239] ? __mincore_unmapped_range+0x14f/0x190 [ 2.275242] kasan_report+0xce/0x100 [ 2.275245] ? __mincore_unmapped_range+0x14f/0x190 [ 2.275248] __mincore_unmapped_range+0x14f/0x190 [ 2.275252] mincore_unmapped_range+0x45/0x70 [ 2.275254] walk_pgd_range+0xafc/0xfc0 [ 2.275261] ? __pfx_walk_pgd_range+0x10/0x10 [ 2.275264] ? __update_load_avg_se+0x3d1/0x670 [ 2.275275] __walk_page_range+0xc0/0x310 [ 2.275278] ? __pfx_find_vma+0x10/0x10 [ 2.275281] ? finish_task_switch.isra.0+0x16d/0x4f0 [ 2.275290] walk_page_range_mm_unsafe+0x26f/0x3a0 [ 2.275293] ? __pfx_mtree_load+0x10/0x10 [ 2.275298] ? __pfx_walk_page_range_mm_unsafe+0x10/0x10 [ 2.275302] ? __free_frozen_pages+0x54d/0x7e0 [ 2.275308] __do_sys_mincore+0x132/0x380 [ 2.275311] do_syscall_64+0xf9/0x540 [ 2.275316] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2.275322] RIP: 0033:0x422ccd [ 2.275326] Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 2.275329] RSP: 002b:00007fffffffec18 EFLAGS: 00000287 ORIG_RAX: 000000000000001b [ 2.275337] RAX: ffffffffffffffda RBX: 0000000000000066 RCX: 0000000000422ccd [ 2.275339] RDX: 00000000004d0940 RSI: 0000000001000000 RDI: 00007ffff4000000 [ 2.275340] RBP: 00000000004d0940 R08: 0000000000000100 R09: 0000000000000100 [ 2.275342] R10: 0000000000000100 R11: 0000000000000287 R12: 20c49ba5e353f7cf [ 2.275343] R13: 00000000004990d3 R14: 0000000000000000 R15: 0000000000000001 [ 2.275346] </TASK> [ 2.275347] [ 2.296904] The buggy address belongs to the object at ffff888008d9b000 [ 2.296904] which belongs to the cache sigqueue of size 80 [ 2.298151] The buggy address is located 0 bytes inside of [ 2.298151] allocated 80-byte region [ffff888008d9b000, ffff888008d9b050) [ 2.299408] [ 2.299601] The buggy address belongs to the physical page: [ 2.300191] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8d9b ---truncated--- | 19 Oct |
| CVE-2026-81000exploit ×3 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and when choosing how much packet data to keep linear. OVS can propagate an oversized headroom request from another port to TUN or TAP. When align is larger than the usable space in a one-page skb head, SKB_MAX_HEAD(align) underflows and the result becomes negative when stored in good_linear. That value later wraps when assigned to the size_t linear variable, and tun_alloc_skb() can place skb->data outside the allocated head. Bound the headroom stored by TUN to the one-page skb-head budget and the largest non-sentinel 16-bit skb header offset. Leave one linear byte for raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN. Also pull the raw-TUN protocol byte and the TAP Ethernet header before accessing them, so these checks remain safe for nonlinear skbs supplied by other allocation paths. | 19 Oct |
| CVE-2026-72018exploit | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL. | 16 Oct |
| CVE-2025-40271exploit ×3 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fs/proc: fix uaf in proc_readdir_de() Pde is erased from subdir rbtree through rb_erase(), but not set the node to EMPTY, which may result in uaf access. We should use RB_CLEAR_NODE() set the erased node to EMPTY, then pde_subdir_next() will return NULL to avoid uaf access. We found an uaf issue while using stress-ng testing, need to run testcase getdent and tun in the same time. The steps of the issue is as follows: 1) use getdent to traverse dir /proc/pid/net/dev_snmp6/, and current pde is tun3; 2) in the [time windows] unregister netdevice tun3 and tun2, and erase them from rbtree. erase tun3 first, and then erase tun2. the pde(tun2) will be released to slab; 3) continue to getdent process, then pde_subdir_next() will return pde(tun2) which is released, it will case uaf access. CPU 0 | CPU 1 ------------------------------------------------------------------------- traverse dir /proc/pid/net/dev_snmp6/ | unregister_netdevice(tun->dev) //tun3 tun2 sys_getdents64() | iterate_dir() | proc_readdir() | proc_readdir_de() | snmp6_unregister_dev() pde_get(de); | proc_remove() read_unlock(&proc_subdir_lock); | remove_proc_subtree() | write_lock(&proc_subdir_lock); [time window] | rb_erase(&root->subdir_node, &parent->subdir); | write_unlock(&proc_subdir_lock); read_lock(&proc_subdir_lock); | next = pde_subdir_next(de); | pde_put(de); | de = next; //UAF | rbtree of dev_snmp6 | pde(tun3) / \ NULL pde(tun2) | 15 Oct |
| CVE-2026-53264exploit ×2 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: use RCU with deferred freeing for action lifecycle When NEWTFILTER and DELFILTER are run concurrently it is possible to create a race with an associated action. Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory This patch fixes the race condition between NEWTFILTER and DELFILTER by adding struct rcu_head to tc_action used in the deferral and introducing a call_rcu() in the delete path to defer the final kfree(). Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") but also modernization/simplification to directly use kfree_rcu(). Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace period After CPU1 calls idr_remove(), the object is no longer reachable through the IDR. CPU0's subsequent idr_find() will return NULL, and even if it still held a stale pointer, the immediate kfree() is now deferred until after the RCU grace period, so no UAF can occur. | 15 Oct |
| CVE-2026-23010exploit | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix use-after-free in inet6_addr_del(). syzbot reported use-after-free of inet6_ifaddr in inet6_addr_del(). [0] The cited commit accidentally moved ipv6_del_addr() for mngtmpaddr before reading its ifp->flags for temporary addresses in inet6_addr_del(). Let's move ipv6_del_addr() down to fix the UAF. [0]: BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593 CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181 inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f164cf8f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749 RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003 RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288 </TASK> Allocated by task 9593: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120 inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050 addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160 inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6099: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free_freelist_hook mm/slub.c:2569 [inline] slab_free_bulk mm/slub.c:6696 [inline] kmem_cache_free_bulk mm/slub.c:7383 [inline] kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362 kfree_bulk include/linux/slab.h:830 [inline] kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523 kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline] kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801 process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257 process_scheduled_works kernel/workqu ---truncated--- | 15 Oct |
| CVE-2023-52927exploit ×2 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: allow exp not to be removed in nf_ct_find_expectation Currently nf_conntrack_in() calling nf_ct_find_expectation() will remove the exp from the hash table. However, in some scenario, we expect the exp not to be removed when the created ct will not be confirmed, like in OVS and TC conntrack in the following patches. This patch allows exp not to be removed by setting IPS_CONFIRMED in the status of the tmpl. | 15 Oct |
| CVE-2023-3609exploit | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | A use-after-free vulnerability in the Linux kernel's net/sched: cls_u32 component can be exploited to achieve local privilege escalation. If tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability. We recommend upgrading past commit 04c55383fa5689357bcdd2c8036725a55ed632bc. | 14 Oct |
| CVE-2020-1712exploit | 7.8 high | 0.00% | systemd_project, redhat, systemd, ceph_storage, discovery | A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages. | 14 Oct |
| CVE-2026-92162exploit | 7.2 high | 0.00% | no CPE yet | Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. Prior to version 1.18.1, on systems where at least one OCI remote is configured (most common on Fedora systems), a malicious local user in an active local session could use a crafted architecture name to trick the `flatpak-system-helper` process into creating a root-owned directory tree with contents determined by the OCI remote, plus a root-owned `lock` file and `icons` directory, outside the intended root directory. If this vulnerability is combined with other vulnerabilities also fixed in 1.18.1, the combination can lead to local root privilege escalation. This particular vulnerability is not believed to be exploitable if there are no OCI remotes configured (common on non-Fedora systems). Version 1.18.1 patches the issue. | 20 Oct |
| CVE-2026-53361exploit | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc(). | 19 Oct |
| CVE-2026-98180exploit | 7.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer and struct msm_gem_vm embed a struct drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then free the containing object with plain kfree(). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace (the submit out-fence, or a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded scheduler after the ring/VM is freed, so a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing objects with kfree_rcu() instead of kfree(). Patchwork: https://patchwork.freedesktop.org/patch/750234/ | 19 Oct |
| CVE-2025-38502exploit | 7.1 high | 0.00% | linux, debian, linux_kernel, debian_linux, simatic_cn_4100_firmware | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps. | 15 Oct |
| CVE-2026-46243exploit ×5 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. | 15 Oct |
| CVE-2025-34324exploit | 7.0 high | 0.00% | infocert, gosign | GoSign Desktop versions 2.4.0 and earlier use an unsigned update manifest for distributing application updates. The manifest contains package URLs and SHA-256 hashes but is not digitally signed, so its authenticity relies solely on the underlying TLS channel. In affected versions, TLS certificate validation can be disabled when a proxy is configured, allowing an attacker who can intercept network traffic to supply a malicious update manifest and corresponding package with a matching hash. This can cause the client to download and install a tampered update, resulting in arbitrary code execution with the privileges of the GoSign Desktop user on Windows and macOS, or with elevated privileges on some Linux deployments. A local attacker who can modify proxy settings may also abuse this behavior to escalate privileges by forcing installation of a crafted update. | 18 Oct |
| CVE-2026-53613exploit | 7.0 high | 0.00% | no CPE yet | util-linux is a random collection of Linux utilities. In util-linux 2.17 through 2.41.6 and 2.42 through 2.42.3, and in 2.42.4 when the legacy `mount(2)` path is used without `/proc`, restricted non-root `mount` requests validate an `/etc/fstab` target before the mount operation re-resolves that pathname. A local low-privileged user authorized by an fstab `user` or `users` entry whose target has an attacker-writable ancestor can use `renameat2(RENAME_EXCHANGE)` to swap a path component and redirect an authorized mount to a root-owned location, such as mounting attacker-controlled content over `/etc/sudoers.d`, and thereby gain root privileges. Versions 2.41.5 and 2.42.2 pin targets for the new mount API, and 2.42.4 pins legacy targets through `/proc/self/fd`; the documented legacy fallback without `/proc` remains affected. | 16 Oct |
| CVE-2026-77113exploit | 6.7 medium | 0.00% | no CPE yet | Path traversal in apport-unpack in Canonical Apport before 2.36.0, 2.34.2, and 2.28.4 on Linux allows an attacker to create or overwrite arbitrary files with the privileges of the executing user via an attacker controlled key names in crash report files. | 18 Oct |
| CVE-2026-47630exploit | 5.5 medium | 0.00% | nvidia, triton_inference_server | NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause an absolute path traversal. A successful exploit might lead to code execution. | Thu 22 Oct |
| CVE-2026-23007exploit | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: block: zero non-PI portion of auto integrity buffer The auto-generated integrity buffer for writes needs to be fully initialized before being passed to the underlying block device, otherwise the uninitialized memory can be read back by userspace or anyone with physical access to the storage device. If protection information is generated, that portion of the integrity buffer is already initialized. The integrity data is also zeroed if PI generation is disabled via sysfs or the PI tuple size is 0. However, this misses the case where PI is generated and the PI tuple size is nonzero, but the metadata size is larger than the PI tuple. In this case, the remainder ("opaque") of the metadata is left uninitialized. Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the metadata is larger than just the PI tuple. | 21 Oct |
| CVE-2025-38678exploit | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject duplicate device on updates A chain/flowtable update with duplicated devices in the same batch is possible. Unfortunately, netdev event path only removes the first device that is found, leaving unregistered the hook of the duplicated device. Check if a duplicated device exists in the transaction batch, bail out with EEXIST in such case. WARNING is hit when unregistering the hook: [49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150 [49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full) [...] [49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150 | 19 Oct |
| CVE-2025-39965exploit | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_alloc_spi shouldn't use 0 as SPI x->id.spi == 0 means "no SPI assigned", but since commit 94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states and add them to the byspi list with this value. __xfrm_state_delete doesn't remove those states from the byspi list, since they shouldn't be there, and this shows up as a UAF the next time we go through the byspi list. | 19 Oct |
| CVE-2025-40040exploit | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix flag-dropping behavior in ksm_madvise syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is no longer a kernel BUG, but a WARNING at the same place: [ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067 but the root-cause (flag-drop) remains the same. [[email protected]: rust bindgen wasn't able to handle BIT(), from Miguel] | 19 Oct |
| CVE-2026-23005exploit | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1 When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel. E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848 Modules linked in: kvm_intel kvm irqbypass CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 switch_fpu_return+0x4a/0xb0 kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd(). and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867 Modules linked in: kvm_intel kvm irqbypass CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 fpu_swap_kvm_fpstate+0x6b/0x120 kvm_load_guest_fpu+0x30/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component): If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i). Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD. Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features. [Move clea ---truncated--- | 19 Oct |
| CVE-2024-58239exploit ×2 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tls: stop recv() if initial process_rx_list gave us non-DATA If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work. | 15 Oct |
| CVE-2026-23398exploit ×2 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: icmp: fix NULL pointer dereference in icmp_tag_validation() icmp_tag_validation() unconditionally dereferences the result of rcu_dereference(inet_protos[proto]) without checking for NULL. The inet_protos[] array is sparse -- only about 15 of 256 protocol numbers have registered handlers. When ip_no_pmtu_disc is set to 3 (hardened PMTU mode) and the kernel receives an ICMP Fragmentation Needed error with a quoted inner IP header containing an unregistered protocol number, the NULL dereference causes a kernel panic in softirq context. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143) Call Trace: <IRQ> icmp_rcv (net/ipv4/icmp.c:1527) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207) ip_local_deliver_finish (net/ipv4/ip_input.c:242) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) __netif_receive_skb_one_core (net/core/dev.c:6164) process_backlog (net/core/dev.c:6628) handle_softirqs (kernel/softirq.c:561) </IRQ> Add a NULL check before accessing icmp_strict_tag_validation. If the protocol has no registered handler, return false since it cannot perform strict tag validation. | 15 Oct |
| CVE-2026-57973exploit | 4.7 medium | 0.00% | microsoft, windows_subsystem_for_linux | Time-of-check time-of-use (toctou) race condition in Windows Subsystem for Linux allows an authorized attacker to perform tampering locally. | Sat 24 Oct |
| CVE-2026-23004exploit | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() syzbot was able to crash the kernel in rt6_uncached_list_flush_dev() in an interesting way [1] Crash happens in list_del_init()/INIT_LIST_HEAD() while writing list->prev, while the prior write on list->next went well. static inline void INIT_LIST_HEAD(struct list_head *list) { WRITE_ONCE(list->next, list); // This went well WRITE_ONCE(list->prev, list); // Crash, @list has been freed. } Issue here is that rt6_uncached_list_del() did not attempt to lock ul->lock, as list_empty(&rt->dst.rt_uncached) returned true because the WRITE_ONCE(list->next, list) happened on the other CPU. We might use list_del_init_careful() and list_empty_careful(), or make sure rt6_uncached_list_del() always grabs the spinlock whenever rt->dst.rt_uncached_list has been set. A similar fix is neeed for IPv4. [1] BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline] BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline] BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450 CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: netns cleanup_net Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 INIT_LIST_HEAD include/linux/list.h:46 [inline] list_del_init include/linux/list.h:296 [inline] rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853 addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] netif_close_many+0x29c/0x410 net/core/dev.c:1785 unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353 ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248 cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 803: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated--- | 19 Oct |
| CVE-2025-40019exploit ×2 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Check ssize for decryption and in-place encryption Move the ssize check to the start in essiv_aead_crypt so that it's also checked for decryption and in-place encryption. | 19 Oct |
| CVE-2026-80844exploit ×3 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm: ah6: validate routing header segments_left AH6 rearranges routing-header addresses before computing or verifying the ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than the number of addresses described by the routing header's hdrlen field. That assumption does not hold for raw IPv6 HDRINCL packets. A packet with hdrlen equal to 2 describes one address, but can carry an arbitrary segments_left value. With segments_left equal to 255, the function moves its address pointer 4,064 bytes backwards and passes a 4,064-byte length to memmove(), resulting in an out-of-bounds access. Validate the invariant locally before modifying the routing header or performing any address-pointer arithmetic, and propagate malformed-header errors to the existing AH6 input and output error paths. | 19 Oct |
| CVE-2026-80775exploit | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: futex: Fix race on the initial mm->futex.phash.ref allocation futex_hash_allocate() allocates mm->futex.phash.ref without any locking. Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()") moved the allocation here and assumed that the process has just a single thread at this point. Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private default hash alloc") widened need_futex_hash_allocate_default() to cover any CLONE_VM clone, but left out vfork because the parent is suspended and cannot race. That no longer holds once vfork is nested. If a vfork child calls vfork again and is then killed with SIGKILL, the parent is released from its vfork wait and runs concurrently with the grandchild in the same mm. Neither of them went through futex_hash_allocate_default(). When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same time, each one sees mm->futex.phash.ref as NULL and stores its own percpu counter. Only the last store survives. The counter stored first is no longer reachable from the mm, so the references on it are not seen by __futex_ref_atomic_end(). A private hash that still has references is then considered dead and freed, and a task that still holds one of its buckets writes into freed memory in futex_q_lock(). Store the counter once with cmpxchg() and let the loser free_percpu() its own. The initial reference has to be taken before the store, otherwise another task can install a private hash while the counter is still 0. | 19 Oct |
| CVE-2025-68325exploit | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop In cake_drop(), qdisc_tree_reduce_backlog() is used to update the qlen and backlog of the qdisc hierarchy. Its caller, cake_enqueue(), assumes that the parent qdisc will enqueue the current packet. However, this assumption breaks when cake_enqueue() returns NET_XMIT_CN: the parent qdisc stops enqueuing current packet, leaving the tree qlen/backlog accounting inconsistent. This mismatch can lead to a NULL dereference (e.g., when the parent Qdisc is qfq_qdisc). This patch computes the qlen/backlog delta in a more robust way by observing the difference before and after the series of cake_drop() calls, and then compensates the qdisc tree accounting if cake_enqueue() returns NET_XMIT_CN. To ensure correct compensation when ACK thinning is enabled, a new variable is introduced to keep qlen unchanged. | 13 Oct |
| CVE-2022-2068 | 7.3 high | 96.0% | openssl, debian, debian_linux, fedora | In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). | 14 Oct |
| CVE-2021-3711 | 9.8 critical | 88.0% | openssl, debian, debian_linux, active_iq_unified_manager | In order to decrypt SM2 encrypted data an application is expected to call the API function EVP_PKEY_decrypt(). Typically an application will call this function twice. The first time, on entry, the "out" parameter can be NULL and, on exit, the "outlen" parameter is populated with the buffer size required to hold the decrypted plaintext. The application can then allocate a sufficiently sized buffer and call EVP_PKEY_decrypt() again, but this time passing a non-NULL value for the "out" parameter. A bug in the implementation of the SM2 decryption code means that the calculation of the buffer size required to hold the plaintext returned by the first call to EVP_PKEY_decrypt() can be smaller than the actual size required by the second call. This can lead to a buffer overflow when EVP_PKEY_decrypt() is called by the application a second time with a buffer that is too small. A malicious attacker who is able present SM2 content for decryption to an application could cause attacker chosen data to overflow the buffer by up to a maximum of 62 bytes altering the contents of other data held after the buffer, possibly changing application behaviour or causing the application to crash. The location of the buffer is application dependent but is typically heap allocated. Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). | 8 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.