Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-89586 | 8.2 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte ata_scsi_rbuf staging buffer, and the number of bytes copied is compared against the logical sector size by the caller: size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); if (size != len) /* len == sdp->sector_size */ goto invalid_param_len; ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE (2048). On a device whose logical sector size exceeds that (e.g. a 4Kn device, where sector_size == 4096) the function can never return more than 2048, while the caller expects it to return sector_size. The comparison therefore always fails, so every TRIM is rejected with "Parameter list length error" and WARN_ON() splats on each attempt. TRIM / discard is thus completely broken on such devices. The descriptor was incorrectly sized from the logical sector size. A DSM TRIM payload is a list of 512-byte pages, each holding up to ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical sector size. The Block Limits VPD page already advertises a single such page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical blocks), so the block layer never sends a request that needs more than one page. Emit exactly one 512-byte page, independent of the logical sector size, and transfer only that page (COUNT == 1). For a 512-byte-sector device this is unchanged; devices with larger logical sectors now work instead of failing every TRIM. | 19 Oct |
| CVE-2026-104937 | 8.1 high | 1.0% | no CPE yet | Shopware version 6.7 allows the upload of attacker‑controlled HTML files and serves them as text/html without effective security headers, enabling stored cross-site scripting (XSS). When a malicious uploaded file containing an embedded JavaScript payload is viewed by an administrator, the attacker can access and exfiltrate the administrator's authentication token. The compromised token enables unauthorized access to the Shopware Administration API. If the affected administrator account possesses extension‑management privileges, an attacker can upload, install, and activate malicious plugins to achieve arbitrary PHP code execution on the underlying OS with the privileges of the Shopware process. | 20 Oct |
| CVE-2025-61773 | 8.1 high | 1.0% | no CPE yet | pyLoad is a free and open-source download manager written in Python. In versions prior to 0.5.0b3.dev91, pyLoad web interface contained insufficient input validation in both the Captcha script endpoint and the Click'N'Load (CNL) Blueprint. This flaw allowed untrusted user input to be processed unsafely, which could be exploited by an attacker to inject arbitrary content into the web UI or manipulate request handling. The vulnerability could lead to client-side code execution (XSS) or other unintended behaviors when a malicious payload is submitted. user-supplied parameters from HTTP requests were not adequately validated or sanitized before being passed into the application logic and response generation. This allowed crafted input to alter the expected execution flow. CNL (Click'N'Load) blueprint exposed unsafe handling of untrusted parameters in HTTP requests. The application did not consistently enforce input validation or encoding, making it possible for an attacker to craft malicious requests. Version 0.5.0b3.dev91 contains a patch for the issue. | 19 Oct |
| CVE-2026-72310 | 8.1 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. | 16 Oct |
| CVE-2026-104909 | 8.1 high | 1.0% | no CPE yet | The Mang Board plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.4.3 via the '<mode>_type (e.g. foo_type)' parameter parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. Exploitation is trivial via an unauthenticated POST to any page rendering a public [mb_board] shortcode, as no nonce or capability check is enforced on the shortcode render path; on servers with a standard PHP installation, pearcmd.php can be leveraged to write and then include an attacker-controlled payload file in a single request. | 14 Oct |
| CVE-2026-103367 | 8.1 high | 1.0% | no CPE yet | The ShopMagic – email automation for WordPress plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 4.9.0 via the 'billing_address.first_name' parameter parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. Exploitation requires a published recipe that processes the {{ customer.first_name }} placeholder — the plugin's built-in "New Order email with social media profile links" recipe satisfies this requirement out of the box, making the default configuration exploitable with no account, cookie, or nonce by simply submitting a guest checkout with the payload as the billing first name. | 14 Oct |
| CVE-2026-58390 | 8.0 high | 1.0% | no CPE yet | OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the OpenVPN connection-status dashboard widget in src/opnsense/www/js/widgets/OpenVPNClients.js and the connection-status view place a client common_name into data-common-name attributes without quote-safe encoding. Exploitation requires an OpenVPN server configured with username-as-common-name and RADIUS or LDAP authentication, plus the ability to provision or self-register a valid backend username containing a double quote; deployments where the same administrator controls both the identity backend and firewall do not cross a separate trust boundary. An authenticated client using that username can close the attribute and add an event handler, while the local user database is not affected because its username validator rejects quotes. Script executes in an administrator's session when the administrator opens the dashboard or connection-status page and the injected event is triggered; the demonstrated payload used pointer movement over the client row rather than unconditional page-load execution. The advisory demonstrates that the script can read config.xml, invoke privileged APIs, reset the root password, and obtain root command execution. This issue is fixed in version 26.1.11. | 20 Oct |
| CVE-2026-57859 | 7.7 high | 1.0% | no CPE yet | e107 prior to version 2.3.8 contains a code execution vulnerability in the e_array deserialization handler that allows an attacker with out-of-band database write access to execute arbitrary PHP code by storing a crafted payload in the user_prefs column. The e_array::unserialize() function in e107_handlers/core_functions.php performs only a prefix check for the string 'array' before passing the stored value to eval(), causing automatic PHP execution whenever the affected user's preferences are materialized through e_user_pref::load(). | Fri 23 Oct |
| CVE-2026-59158 | 7.5 high | 1.0% | no CPE yet | Nuxt Ollama integrates the official Ollama JavaScript library into Nuxt applications. Prior to 1.3.1, `src/module.ts` unconditionally merges all module options, including a configured cloud `api_key`, into `runtimeConfig.public.ollama`. Nuxt serializes this public configuration into the server-rendered HTML `window.__NUXT__` payload, exposing the API key in plaintext to any unauthenticated client that fetches a page. `src/runtime/composables/useOllama.ts` also reads the public key and sends it as an `Authorization` `Bearer` credential in browser-side Ollama requests. Following the documented cloud configuration is sufficient; the visible application template need not make an Ollama request for the secret to leak. A stolen key permits unauthorized cloud API requests at the operator's expense, quota or rate-limit exhaustion, and access to stored models or conversations if the key grants those permissions. This issue is fixed in version 1.3.1. | Wed 28 Oct |
| CVE-2026-104016 | 7.5 high | 1.0% | no CPE yet | ProtobufParser parses length-prefixed protobuf string and bytes fields by checking (_inputPtr + len) <= _inputEnd and then, on the fast path, calling _finishShortText(len). Both use 32-bit signed integer arithmetic. When an attacker supplies a varint decoding to a length near Integer.MAX_VALUE, _inputPtr + len overflows to a negative value, the bounds check passes, and _finishShortText(len) reaches TextBuffer.expandCurrentSegment(len), which performs Arrays.copyOf with no cap and throws OutOfMemoryError: Requested array size exceeds VM limit. The JVM refuses arrays larger than Integer.MAX_VALUE - 8 before consulting available heap, so -Xmx tuning does not mitigate the issue. StreamReadConstraints.maxStringLength and maxDocumentLength do not gate this path: a 33-byte payload is far below any document-length cap and the string-length check does not fire before the allocation. This was confirmed empirically against shipping artifacts with maxStringLength, maxDocumentLength and maxNestingDepth all configured. A February 2026 hardening commit added the equivalent overflow guard to the packed-array-length and message-length paths but left the string-length call sites unguarded. No privileges or user interaction beyond the ability to submit data for parsing are required. | Wed 28 Oct |
| CVE-2026-56386 | 7.5 high | 1.0% | no CPE yet | Integer underflow and out-of-bounds read in the HTTP/2 server DATA frame parser in Apache bRPC allows an unauthenticated remote attacker to cause denial of service by sending a malformed DATA frame with the PADDED flag set and a zero-length payload. Root Cause: The HTTP/2 DATA frame handler computed the fragment size from the attacker-controlled payload length and, when the PADDED flag was present, decremented the fragment size before ensuring that the frame contained the mandatory pad length byte. A zero-length padded DATA frame could therefore underflow the unsigned fragment size and read the pad length byte past the end of the frame buffer. Affected Scenarios: Apache bRPC servers that accept HTTP/2 traffic are affected when a remote client can send crafted HTTP/2 frames to the server. HTTP/2 may be reached through cleartext h2c detection on an HTTP port or through TLS ALPN negotiation. How to Fix: (Choose one of the following options) 1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3325 Note: The fix validates that a padded DATA frame has enough payload bytes for the pad length field before decrementing the fragment size or reading the pad length byte. Malformed zero-length padded DATA frames are rejected with HTTP/2 FRAME_SIZE_ERROR. | Mon 26 Oct |
| CVE-2026-74757 | 7.5 high | 1.0% | no CPE yet | Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count. Root Cause: The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts. Affected Scenarios: Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3451 Note: No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload. | Mon 26 Oct |
| CVE-2026-42440 | 7.5 high | 1.0% | apache, opennlp | OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader Versions Affected: before 1.9.5 before 2.5.9 before 3.0.0-M3 Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. | Mon 26 Oct |
| CVE-2026-42587 | 7.5 high | 1.0% | netty | Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. | Mon 26 Oct |
| CVE-2026-13708 | 7.5 high | 1.0% | no CPE yet | Imager::File::JPEG versions before 1.003 for Perl leak heap memory when reading a JPEG with repeated APP13 markers in i_readjpeg_wiol. i_readjpeg_wiol walks the marker list libjpeg returns and, for each APP13 marker, allocates a new buffer with *iptc_itext = mymalloc(...) and overwrites the previous pointer without freeing it. Only the final payload is later turned into a Perl scalar and freed, so a JPEG with N such markers leaks the first N-1 payloads on every read. In a long-lived process, such as an upload or thumbnailing service, repeated reads accumulate these leaks and exhaust available memory, a denial of service. The same handler ships bundled in the Imager distribution, where versions before 1.032 are affected and the fix ships in 1.032. | Sun 25 Oct |
| CVE-2026-45713 | 7.5 high | 1.0% | axllent, mailpit | Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch. | Sat 24 Oct |
| CVE-2023-29105 | 7.5 high | 1.0% | siemens, 6gk1411-1ac00_firmware, 6gk1411-5ac00_firmware | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC712 (All versions < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions < V2.1). The affected device is vulnerable to a denial of service while parsing a random (non-JSON) MQTT payload. This could allow an attacker who can manipulate the communication between the MQTT broker and the affected device to cause a denial of service (DoS). | Fri 23 Oct |
| CVE-2026-43464 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | 21 Oct |
| CVE-2026-92150 | 7.5 high | 1.0% | no CPE yet | F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::GenericHub fromBufferDriver_handler deserialization is vulnerable because the receive handler uses FW_ASSERT for externally influenced deserialization status and type validation and permits a command payload size subtraction to underflow. When an unauthenticated inter-processor hub peer sends a truncated buffer, an invalid HubType, or a header-only command-dispatch payload, malformed hub traffic aborts or resets the process, causing denial of service. This issue is fixed in version 4.2.0. | 20 Oct |
| CVE-2026-68315 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer. Reject peer IN requests whose corresponding OUT request would exceed SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an IN request that would require an oversized OUT request from the peer. | 19 Oct |
| CVE-2026-68131 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | 19 Oct |
| CVE-2026-53003 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding. | 19 Oct |
| CVE-2026-46133 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject unknown opcodes before ICRC processing Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs. | 19 Oct |
| CVE-2025-58754 | 7.5 high | 1.0% | axios | Axios is a promise based HTTP client for the browser and Node.js. When Axios starting in version 0.28.0 and prior to versions 0.30.2 and 1.12.0 runs on Node.js and is given a URL with the `data:` scheme, it does not perform HTTP. Instead, its Node http adapter decodes the entire payload into memory (`Buffer`/`Blob`) and returns a synthetic 200 response. This path ignores `maxContentLength` / `maxBodyLength` (which only protect HTTP responses), so an attacker can supply a very large `data:` URI and cause the process to allocate unbounded memory and crash (DoS), even if the caller requested `responseType: 'stream'`. Versions 0.30.2 and 1.12.0 contain a patch for the issue. | 19 Oct |
| CVE-2025-59043 | 7.5 high | 1.0% | openbao | OpenBao is an open source identity-based secrets management system. In OpenBao versions prior to 2.4.1, JSON objects after decoding may use significantly more memory than their serialized version. It is possible to craft a JSON payload to maximize the factor between serialized memory usage and deserialized memory usage, similar to a zip bomb, with factors reaching approximately 35. This can be used to circumvent the max_request_size configuration parameter which is intended to protect against denial of service attacks. The request body is parsed into a map very early in the request handling chain before authentication, which means an unauthenticated attacker can send a specifically crafted JSON object and cause an out-of-memory crash. Additionally, for requests with large numbers of strings, the audit subsystem can consume large quantities of CPU. The vulnerability is fixed in version 2.4.1. | 19 Oct |
| CVE-2026-90294 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tx() puts the final Login Response on the wire before __transport_register_session(), which iscsi_post_login_handler() reaches only after iscsi_target_do_login() returns. An initiator that issues a SCSI command as soon as it sees that response can have it executed against an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses on the NULL dereference. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ib-comp-wq ib_cq_poll_work RIP: 0010:target_submit+0xbe/0x390 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00 RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363 RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078 RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52 R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000 R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044 FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __pfx__raw_spin_lock_bh+0x10/0x10 ? __pfx_target_submit+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? iscsit_execute_cmd+0x650/0x850 iscsit_sequence_cmd+0x186/0x3d0 iscsit_process_scsi_cmd+0x87/0x300 isert_recv_done+0x1002/0x2390 ? __pfx_isert_recv_done+0x10/0x10 ? rxe_poll_cq+0x253/0x3d0 ? finish_task_switch.isra.0+0x1dc/0xa70 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Delay the final Login Response instead. isert_get_rx_pdu() runs from iscsi_target_rx_thread() after conn->rx_login_comp, completed by iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP and cxgbit already take PDUs from that thread, isert alone does not. The buffers are still posted first, so the initiator's first command does not meet an empty receive queue and nothing depends on RNR flow control, and the header and payload live in isert_conn, not in the struct iscsi_login that iscsi_target_nego_release() frees first. Over rxe, 400 login cycles per run, the oops appeared in 10 of 20 unpatched runs and in none of 20 runs with this patch. An initiator that never waits is handled by the next patch. Not tested: iWARP, discovery sessions over iSER, and real HCAs. | 19 Oct |
| CVE-2026-90067 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810 net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070 ... Call Trace: <TASK> ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> According to the msgr2 protocol specification, the banner payload is expected to contain at least two 64-bit integers (`server_feat` and `server_req_feat`). Therefore, `payload_len` must be at least 16 bytes. Fix this by adding a check in `process_banner_prefix()` to reject a `payload_len` smaller than 16 bytes. This prevents the 0-length read and correctly aborts the connection with a protocol error. | 19 Oct |
| CVE-2026-90059 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: restore NET_IP_ALIGN in the RX DMA offset Since the RX path was converted to zero-copy, the page pool page is handed to the stack directly as the skb head, and the offset the DMA engine writes at is what determines the alignment of the packet headers. Before the conversion the payload was copied into an skb obtained from napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The conversion moved the headroom into stmmac_rx_offset() but did not carry over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP header now lands misaligned: 64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98 Same for the XDP branch: 256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290 On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set. Any received echo request panics the machine, e.g: Unhandled fault: alignment exception (0x001) at 0x81873062 Internal error: : 1 [#1] SMP ARM Hardware name: Altera SOCFPGA Arria10 PC is at icmp_echo+0x38/0xa8 LR is at icmp_rcv+0x22c/0x370 Call trace: icmp_echo from icmp_rcv+0x22c/0x370 icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224 ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0 ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50 ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118 ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0 ... napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030 Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003) Kernel panic - not syncing: Fatal exception in interrupt The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo(). Fix by adding NET_IP_ALIGN back to the RX offset, which restores the alignment the stack used to get. Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert "stmmac: align RX buffers"") because it caused packet corruption. That patch raised the offset from 0 without adjusting the buffer size accounting, so the DMA engine could arguably write past the end of the RX buffers, though this was never root caused. Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX path") since derives the page pool allocation from stmmac_rx_offset(), so the extra bytes are accounted for. | 19 Oct |
| CVE-2026-89699 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: validate symlink target length in NFSv4 CREATE nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for NF4LNK symlink targets, allowing a client to force a kmalloc of up to the maximum RPC payload size (several MiB) per COMPOUND op that persists until compound teardown. The VFS rejects oversized targets with ENAMETOOLONG, but the allocation has already occurred. Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the allocation. | 19 Oct |
| CVE-2026-89483 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are whatever the page last held and are handed to the controller. Reaching it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is memory pressure; it is not remotely triggerable. Failing the allocation under KMSAN reproduces it, with the leaked tail full of vmemmap struct page pointers. The extent in the report is a partial transfer of the payload, not the whole 4096 bytes; the 16-byte boundary in it is the one declared range: [ 11.991601] BUG: KMSAN: uninit-value in dma_map_phys+0x14c8/0x1900 [ 11.991969] dma_map_phys+0x14c8/0x1900 [ 11.992220] dma_map_page_attrs+0xcf/0x130 [ 11.992485] e1000_xmit_frame+0x4099/0x6d10 [ 11.992768] dev_hard_start_xmit+0x22f/0xa80 [ 11.993068] sch_direct_xmit+0x35c/0xcb0 [ 11.993315] __dev_queue_xmit+0x1ee5/0x5eb0 [ 11.993608] ip_finish_output2+0x1903/0x1c30 [ 11.993881] ip_finish_output+0x288/0x870 [ 11.994125] ip_output+0x15e/0x400 [ 11.994365] __ip_queue_xmit+0x1e85/0x1fb0 [ 11.994639] ip_queue_xmit+0x60/0x80 [ 11.994899] __tcp_transmit_skb+0x4e71/0x5fa0 [ 11.995210] tcp_write_xmit+0x3a36/0x9160 [ 11.995533] __tcp_push_pending_frames+0xc5/0x3c0 [ 11.995854] tcp_push+0x7dc/0x840 [ 11.996076] tcp_sendmsg_locked+0x766c/0x8400 [ 11.996371] tcp_sendmsg+0x4b/0x90 [ 11.996572] inet_sendmsg+0x134/0x2a0 [ 11.996823] __sock_sendmsg+0x265/0x360 [ 11.997076] sock_sendmsg+0x100/0x1e0 [ 11.997293] nvme_tcp_try_send+0x196f/0x6370 [ 11.997605] nvme_tcp_queue_rq+0x1d54/0x20b0 [ 11.997882] blk_mq_dispatch_rq_list+0x5ee/0x2e50 [ 11.998175] __blk_mq_sched_dispatch_requests+0x16dc/0x24a0 [ 11.998539] blk_mq_sched_dispatch_requests+0x11b/0x2c0 [ 11.998865] blk_mq_run_work_fn+0x13b/0x280 [ 11.999146] process_scheduled_works+0x966/0x1ad0 [ 11.999465] worker_thread+0xe44/0x1480 [ 11.999709] kthread+0x53b/0x600 [ 11.999927] ret_from_fork+0x29f/0x7c0 [ 12.000191] ret_from_fork_asm+0x1a/0x30 [ 12.000460] [ 12.000558] Uninit was created at: [ 12.000788] __alloc_frozen_pages_noprof+0x8bf/0xd30 [ 12.001096] alloc_pages_mpol+0x1d0/0x5f0 [ 12.001326] alloc_pages_noprof+0x102/0x290 [ 12.001627] nvme_init_ctrl+0x5a3/0x9f0 [ 12.001891] nvme_tcp_create_ctrl+0xd75/0x19b0 [ 12.002170] nvmf_dev_write+0x4c68/0x4fd0 [ 12.002426] vfs_write+0x587/0x1a10 [ 12.002636] __x64_sys_write+0x207/0x4f0 [ 12.002874] x64_sys_call+0x2ff0/0x3ea0 [ 12.003123] do_syscall_64+0x147/0x3b0 [ 12.003400] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 12.003680] [ 12.003777] Bytes 16-2843 of 2844 are uninitialized [ 12.004068] Memory access of size 2844 starts at ffff888109f82000 [ 12.004412] [ 12.004530] CPU: 0 UID: 0 PID: 101 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMECTL-gf5098b6bae76 #1 PREEMPT(lazy) [ 12.005127] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 12.005762] Workqueue: kblockd blk_mq_run_work_fn [ 12.006073] ===================================================== Allocate the page with __GFP_ZERO. The single allocation site covers every use of it: bytes no discard has written stay zero, and bytes one did write hold that controller's own range list, which it has already been sent. | 19 Oct |
| CVE-2025-13502 | 7.5 high | 1.0% | no CPE yet | A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. | 18 Oct |
| CVE-2026-72330 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | 16 Oct |
| CVE-2025-68206 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding. | 15 Oct |
| CVE-2025-38566 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix handling of server side tls alerts Scott Mayhew discovered a security exploit in NFS over TLS in tls_alert_recv() due to its assumption it can read data from the msg iterator's kvec.. kTLS implementation splits TLS non-data record payload between the control message buffer (which includes the type such as TLS aler or TLS cipher change) and the rest of the payload (say TLS alert's level/description) which goes into the msg payload buffer. This patch proposes to rework how control messages are setup and used by sock_recvmsg(). If no control message structure is setup, kTLS layer will read and process TLS data record types. As soon as it encounters a TLS control message, it would return an error. At that point, NFS can setup a kvec backed msg buffer and read in the control message such as a TLS alert. Msg iterator can advance the kvec pointer as a part of the copy process thus we need to revert the iterator before calling into the tls_alert_recv. | 15 Oct |
| CVE-2026-92151 | 7.5 high | 1.0% | no CPE yet | F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::Ccsds::SpacePacketDeframer dataIn_handler is vulnerable because the handler treats the minimum packet-length condition as FW_ASSERT rather than rejecting and returning the buffer. When a CCSDS telecommand frame leaves a payload of six bytes or fewer after TcDeframer removes its header and trailer, the assertion aborts or resets the flight-software process, causing denial of service. This issue is fixed in version 4.2.0. | 15 Oct |
| CVE-2026-104749 | 7.5 high | 1.0% | no CPE yet | The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. | 14 Oct |
| CVE-2025-59531 | 7.5 high | 1.0% | argoproj, argo_cd | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions 1.2.0 through 1.8.7, 2.0.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.7 and 3.0.18 are vulnerable to malicious API requests which can crash the API server and cause denial of service to legitimate clients. Without a configured webhook.bitbucketserver.secret, Argo CD's /api/webhook endpoint crashes when receiving a malformed Bitbucket Server payload (non-array repository.links.clone field). A single unauthenticated request triggers CrashLoopBackOff, and targeting all replicas causes complete API outage. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19. | 12 Oct |
| CVE-2026-15722 | 7.5 high | 1.0% | redhat, directory_server, 389_directory_server, enterprise_linux | A stack buffer overflow flaw was found in 389 Directory Server (389-ds-base). The get_ruvelement_from_berval() function in repl5_ruv.c copies digit characters from a network-supplied RUV berval into a fixed 16-byte stack buffer without bounds checking. A remote unauthenticated attacker can crash the LDAP server by sending a crafted StartNSDS50ReplicationRequest extended operation containing a replica ID field with more than 16 digit characters. The overflow occurs during payload decoding, before any authorization check. Stack protectors limit impact to denial of service. | 8 Oct |
| CVE-2026-10665 | 7.4 high | 1.0% | zephyrproject, zephyr | In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN — e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it — the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len > CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity. | Sat 24 Oct |
| CVE-2026-60080 | 7.3 high | 1.0% | apache, fory | Use After Free vulnerability in the Rust deserialization logic of Apache Fory. This issue affects Apache Fory from 0.13.0 through 1.3.0. A crafted Fory payload could cause undefined behavior, process crash, or potential memory disclosure. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | Sat 24 Oct |
| CVE-2026-16521 | 7.2 high | 1.0% | no CPE yet | An OS command injection vulnerability exists because of insufficient input filtering. An attacker can inject a command payload into a BMC function; the payload may execute when the related service is restarted. | Tue 27 Oct |
| CVE-2026-25917 | 7.2 high | 1.0% | apache, airflow | Dag Authors, who normally should not be able to execute code in the webserver context could craft XCom payload causing the webserver to execute arbitrary code. Since Dag Authors are already highly trusted, severity of this issue is Low. Users are recommended to upgrade to Apache Airflow 3.2.0, which fixes the issue. | Mon 26 Oct |
| CVE-2026-114624 | 7.2 high | 1.0% | no CPE yet | baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the widget-area entity serializes widgets only when the submitted value is an array, allowing a string submitted through the admin JSON API to be stored unchanged. Entity reads, including front-end rendering and API responses, deserialize the stored value with unserialize() without an allowed_classes restriction, accepting both raw and base64-encoded serialized data. An administrator, or an attacker who obtains widget-write capability through a separate vulnerability such as chained XSS, can plant an object graph that subsequently triggers on unauthenticated page requests. Two demonstrated gadget chains in the default dependency set use composer/composer ProcessExecutor::startJob() with Process::fromShellCommandline(), or logiscape/mcp-sdk-php StdioTransport::connect() with StdioServerParameters, to reach proc_open() and execute commands as the web-server user. Deserialization bypasses constructor-based readonly safeguards, and the stored payload can execute repeatedly until the database row is repaired. Unauthenticated page access is a trigger after privileged payload storage, not an unauthenticated means of initially planting the payload. This issue has been patched in versions 5.3.2 and 5.4.2. | Fri 23 Oct |
| CVE-2025-1862 | 7.2 high | 1.0% | wso2, enterprise_integrator, identity_server, identity_server_as_key_manager | An arbitrary file upload vulnerability exists in multiple WSO2 products due to improper validation of user-supplied filenames in the BPEL uploader SOAP service endpoint. A malicious actor with administrative privileges can upload arbitrary files to a user-controlled location on the server. By leveraging this vulnerability, an attacker can upload a specially crafted payload and achieve remote code execution (RCE), potentially compromising the server and its data. | 18 Oct |
| CVE-2026-92925 | 7.1 high | 1.0% | no CPE yet | A flaw was found in Redis community. The cluster bus packet parser, responsible for handling PING, PONG, and MEET packets, fails to properly validate string-carrying extensions for null-termination. This oversight allows a remote attacker to craft a malicious packet, leading to an out-of-bounds read when the packet's payload is processed. Successful exploitation of this vulnerability could result in the disclosure of sensitive information or a remote denial of service (DoS). | Wed 28 Oct |
| CVE-2026-55514 | 7.1 high | 1.0% | vllm | vLLM is a library for LLM inference and serving. From 0.12.0 to before 0.24.0, sending a pure prompt embeds payload in a /v1/completions request with a model using M-RoPE causes EngineCore to fail an assertion and fatally crash, shutting down the entire server application. Any remote user who is authorized to make a /v1/completions request can make such a request and induce a crash. This issue is fixed in version 0.24.0. | Sun 25 Oct |
| CVE-2026-69702 | 7.1 high | 1.0% | no CPE yet | SnailJob 1.7.0 contains a denial of service vulnerability in the FuryUtil.deserialize helper that allows authenticated attackers to crash the server by supplying a crafted Zstandard-compressed payload with an inflated frame_content_size field in the frame header. Attackers can store a base64-encoded Zstandard payload declaring an arbitrarily large decompressed size in a retry task argument, causing the JVM to attempt an unbounded array allocation and triggering an unrecoverable java.lang.OutOfMemoryError when the task is dispatched through the retry-task pipeline. | Sat 24 Oct |
| CVE-2026-74044 | 7.0 high | 1.0% | wazuh | Wazuh 4.0.0 before 4.14.6 contains a path traversal vulnerability that allows authenticated cluster peers to delete arbitrary directory contents by supplying a traversal-shaped node name in the cluster hello payload without validation. Attackers holding a valid cluster Fernet key can craft a malicious node name and disconnect, triggering the master's peer cleanup routine to remove the contents of arbitrary directories within the Wazuh installation path writable by the wazuh user. | 22 Oct |
| CVE-2026-33993 | 6.9 medium | 1.0% | locutus | Locutus brings stdlibs of other programming languages to JavaScript for educational purposes. Prior to version 3.0.25, the `unserialize()` function in `locutus/php/var/unserialize` assigns deserialized keys to plain objects via bracket notation without filtering the `__proto__` key. When a PHP serialized payload contains `__proto__` as an array or object key, JavaScript's `__proto__` setter is invoked, replacing the deserialized object's prototype with attacker-controlled content. This enables property injection, for...in propagation of injected properties, and denial of service via built-in method override. This is distinct from the previously reported prototype pollution in `parse_str` (GHSA-f98m-q3hr-p5wq, GHSA-rxrv-835q-v5mh) — `unserialize` is a different function with no mitigation applied. Version 3.0.25 patches the issue. | Mon 26 Oct |
| CVE-2026-42788 | 6.9 medium | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated memory exhaustion via oversized HTTP/2 frames. 'Elixir.Bandit.HTTP2.Frame':deserialize/2 in lib/bandit/http2/frame.ex checks the SETTINGS_MAX_FRAME_SIZE limit only after pattern-matching payload::binary-size(length), which requires the entire frame body to be present in memory before either the accept or reject clause can fire. A peer that announces a frame length up to the 24-bit maximum (~16 MiB) causes the server to buffer that entire body before the size guard is evaluated, regardless of the max_frame_size negotiated during the HTTP/2 handshake (default 16 KiB per RFC 9113). An unauthenticated attacker holding many concurrent connections can force the server to buffer far more memory than the negotiated frame size limit should permit, leading to memory pressure and potential denial of service. This issue affects bandit: from 0.3.6 before 1.11.0. | Mon 26 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.