Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-60308 | 9.8 critical | 1.0% | oracle, coherence | Vulnerability in the Oracle Coherence product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 14.1.1.0.0, 14.1.2.0.0 and 15.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Coherence. Successful attacks of this vulnerability can result in takeover of Oracle Coherence. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | Sat 24 Oct |
| CVE-2026-60362 | 9.8 critical | 1.0% | oracle, unified_directory | Vulnerability in the Oracle Unified Directory product of Oracle Fusion Middleware (component: OUD Core). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via LDAP to compromise Oracle Unified Directory. Successful attacks of this vulnerability can result in takeover of Oracle Unified Directory. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | Sat 24 Oct |
| CVE-2026-60463 | 9.8 critical | 1.0% | oracle, webcenter_content | Vulnerability in the WebCenter Content: Imaging product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise WebCenter Content: Imaging. Successful attacks of this vulnerability can result in takeover of WebCenter Content: Imaging. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | Sat 24 Oct |
| CVE-2026-98548 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing. | Sat 24 Oct |
| CVE-2026-68503 | 9.8 critical | 1.0% | no CPE yet | LazyOwn RedTeam/APT Framework is an AI-powered C2 and red-team operations framework. Prior to 0.2.154, LazyOwn ships default C2 credentials LazyOwn and LazyOwn in payload.json and core/payload_schema.py and passes them unchanged to lazyc2.py HTTP Basic authentication, allowing any network-reachable attacker who knows the defaults to authenticate to the C2 dashboard with operator-level access. This issue is fixed in 0.2.154. | Fri 23 Oct |
| CVE-2026-10025 | 9.8 critical | 1.0% | ibm, qradar_security_information_and_event_manager | IBM QRadar 7.6.0.0 through 7.6.0.1, and 7.5.0 through 7.5.0 UP 15 Interim Fix 005 has an XML External Entity (XXE) injection vulnerability. The vulnerability resides in the parseXmlPayload() function within the event processing pipeline ( q1labs_core.jar ). When at least one log source type is configured to use XML-format property autodetection, the system processes XML-formatted syslog events sent to port 514 (UDP/TCP) without authentication. | Fri 23 Oct |
| CVE-2026-60672 | 9.8 critical | 1.0% | oracle, weblogic_server | Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0, 14.1.2.0.0 and 15.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-60696 | 9.8 critical | 1.0% | oracle, weblogic_server | Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0, 14.1.2.0.0 and 15.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-60698 | 9.8 critical | 1.0% | oracle, weblogic_server | Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0, 14.1.2.0.0 and 15.1.1.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via IIOP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-60977 | 9.8 critical | 1.0% | oracle, weblogic_server | Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: WLS Core Components). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via RMI to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-43465 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: <TASK> mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | 21 Oct |
| CVE-2026-63825 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist. | 21 Oct |
| CVE-2026-111862 | 9.8 critical | 1.0% | no CPE yet | Rank Math SEO PRO for WordPress is affected by a supply-chain compromise in a subset of version 3.0.123 packages downloaded or updated between October 15, 2026 at 20:02 UTC and October 16, 2026 at 07:12 UTC. Rank Math states that the affected plugin files contained malware that could compromise a website if the plugin was activated and directs sites that activated an affected package to treat the website as compromised. The malware may establish persistent access, communicate with rank1cdn[.]com, recreate hidden backdoors on page visits, and expose WordPress credentials, database credentials, API keys, and other secrets accessible to the web server. Rank Math identifies three malicious wp_options keys, hidden PHP backdoors, unauthorized administrator accounts, a fake WordPress core file, PHP-executable .cache files, and a system cron marker as incident indicators. Only packages obtained during the vendor-confirmed window are claimed as affected; version 3.0.123 alone is not sufficient to establish compromise. Rank Math removed the affected files and released version 3.0.124 as the clean replacement. | 20 Oct |
| CVE-2026-72084 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | 19 Oct |
| CVE-2026-72083 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT parameter list with transport_kmap_data_sg() and parses the destination TransportID with target_parse_pr_out_transport_id(). For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns the ISID in iport_ptr as a raw pointer into that mapped buffer. The function then unmaps the buffer with transport_kunmap_data_sg() before dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and core_scsi3_alloc_registration(). When the parameter list spans more than one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual address backing iport_ptr is torn down and every subsequent dereference is a use-after-free read of the unmapped region. Keep the parameter list mapped until iport_ptr is no longer needed: drop the early transport_kunmap_data_sg() and unmap once on the success path, right before returning. The error paths already unmap through the existing "if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs on every post-map error exit because buf is no longer cleared early. Only reads of the mapping happen while spinlocks are held; the map and unmap calls remain outside any lock. The sibling caller core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it and is left unchanged. | 19 Oct |
| CVE-2026-64303 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: terminate the RX channel on TX prepare failure path When dmaengine_prep_slave_sg() fails for the TX channel, the error path terminates the TX DMA channel but leaves the RX channel running. Since the RX channel was already submitted and issued prior to preparing the TX descriptor, returning -EINVAL causes the SPI core to unmap the DMA buffers while the RX DMA engine continues writing to them, leading to potential memory corruption or use-after-free. Terminate the RX channel before returning on the TX prepare failure path. | 19 Oct |
| CVE-2026-68117 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | 19 Oct |
| CVE-2026-89681 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix layout fence worker double-reference race The workqueue core clears WORK_STRUCT_PENDING before the callback is invoked, so delayed_work_pending() in lm_breaker_timedout() can return false while the fence worker is already running. This lets the breaker take a duplicate sc_count reference and schedule a new worker that coalesces with the in-progress one. The extra reference is never put, leaking the layout stateid. Replace the racy delayed_work_pending() check with an ls_fence_inflight boolean set atomically with refcount_inc_not_zero() under ls_lock, and cleared under ls_lock before the final nfs4_put_stid() on the dispose path; the retry path intentionally retains it. Remove the self-rearm mod_delayed_work() at the top of the worker. | 19 Oct |
| CVE-2026-89555 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mpls: reload header after pskb_may_pull() mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop when an MPLS route has multiple nexthops. While walking the MPLS label stack, the hash routine caches hdr for the current label. After finding the bottom-of-stack label, it calls pskb_may_pull() before reading the inner IP header. If an skb is constructed with the inner IP header in nonlinear data and insufficient tailroom in the linear head, pskb_may_pull() calls pskb_expand_head() to replace the skb head and free the old one. This leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr again when it performs a second pull for the larger header. The issue was found through static analysis. A reproducer sending a legal Geneve packet through a bareudp/MPLS multipath setup triggered the same KASAN report in 2 of 2 unpatched runs: BUG: KASAN: slab-use-after-free in mpls_select_multipath Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23 Call Trace: mpls_select_multipath mpls_forward __netif_receive_skb_list_core netif_receive_skb_list_internal napi_complete_done gro_cell_poll __napi_poll net_rx_action Freed by task 23: kfree pskb_expand_head __pskb_pull_tail mpls_select_multipath Reload hdr from the current skb head after each successful pull before deriving the inner IPv4 or IPv6 header pointer. | 19 Oct |
| CVE-2026-89542 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_krb5_unwrap_v2 against short tokens gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN (16) bytes long, and its rotate_left() helper passes buf->len - base to xdr_buf_subsegment() without verifying that base <= buf->len. When a caller hands in a sub-16-byte token, or a token whose declared len leaves base past the end of the buffer, three distinct failures follow: gss_krb5_unwrap_v2(offset, len, buf) ptr = buf->head[0].iov_base + offset ec = *(ptr + 4) /* OOB read on short head */ rrc = *(ptr + 6) /* OOB read on short head */ rotate_left(offset + 16, buf, rrc) xdr_buf_subsegment(buf, &subbuf, base, buf->len - base) /* u32 wrap when base > len */ _rotate_left(&subbuf, shift) shift %= buf->len /* divide-by-zero when base == len */ After decryption, the cleanup arithmetic has the same shape: movelen = min_t(unsigned int, buf->head[0].iov_len, len); movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip; BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen > buf->head[0].iov_len); The BUG_ON re-adds the value just subtracted, so it reduces to min(A, B) > A and is permanently false; it cannot catch the unsigned underflow of movelen, which then drives a ~UINT_MAX-byte memmove(). Add four defense-in-depth guards inside the unwrap core so it is safe regardless of what its callers validate: - reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before touching ptr+4/ptr+6; - bail from rotate_left() when buf->len <= base, covering both the underflow and zero-length cases; - return early from _rotate_left() when buf->len is zero, so the shift %= buf->len modulo cannot fault; - replace the dead BUG_ON with a live check that returns GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. | 19 Oct |
| CVE-2026-81002 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page and advertises PAGE_SIZE as its frame size. It allows the copied frame to occupy the page tail needed by skb_shared_info and records zero headroom even when metadata separates the frame header from packet data. An AF_XDP zero-copy packet redirected through cpumap can therefore make the skb overlap skb_shared_info or place it beyond the allocated page. Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the metadata length in frame headroom. Redirect callers already handle a NULL conversion result. BUG: KASAN: slab-out-of-bounds in skb_gro_receive Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146 Call Trace: skb_gro_receive (net/core/gro.c:174) udp_gro_receive (net/ipv4/udp_offload.c:812) inet_gro_receive (net/ipv4/af_inet.c:1539) dev_gro_receive (net/core/gro.c:515) gro_receive_skb (net/core/gro.c:633) cpu_map_kthread_run (kernel/bpf/cpumap.c:395) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) Kernel panic - not syncing: KASAN: panic_on_warn set ... | 19 Oct |
| CVE-2026-80976 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headers and makes the inner packet the skb network header. The IPv6 control block still contains values collected while parsing the outer packet, including nhoff and extension-header flags. End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6 input path. An unprivileged user can reach End.DT6 from a user and net namespace by installing a local SID and injecting an outer packet with Hop-by-Hop and Destination Options headers followed by an SRH and a minimal inner IPv6 packet. The outer extension headers leave a large nhoff in IP6CB. After decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the inner packet and reads beyond the skb head. KASAN reports: BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu ip6_protocol_deliver_rcu+0x1118/0x1450 ip6_input_finish+0x11b/0x240 seg6_local_input_core+0xed/0x2e0 lwtunnel_input+0x1e9/0x4e0 ipv6_rthdr_rcv+0x525f/0x6c50 ip6_protocol_deliver_rcu+0xcb7/0x1450 Before clearing IP6CB for an inner IPv6 packet, save its incoming interface index and L3 slave state. Restore both after the clear and set nhoff to the inner IPv6 base-header nexthdr field. Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can replace skb_iif with the L3 master while IP6CB keeps the receiving interface. Preserve IP6SKB_L3SLAVE for the same reason. | 19 Oct |
| CVE-2026-74384 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix flex array size in struct nvme_ns_head struct nvme_ns_head contains a flexible array member, current_path[], which is indexed using the NUMA node ID: head->current_path[numa_node_id()] The structure is currently allocated as: size = sizeof(struct nvme_ns_head) + (num_possible_nodes() * sizeof(struct nvme_ns *)); head = kzalloc(size, GFP_KERNEL); This allocation assumes that NUMA node IDs are sequential and densely packed from 0 .. num_possible_nodes() - 1. While this assumption holds on many systems, it is not always true on some architectures such as powerpc. On some powerpc systems, NUMA node IDs can be sparse. For example: NUMA: NUMA node(s): 6 NUMA node0 CPU(s): 80-159 NUMA node8 CPU(s): 0-79 NUMA node252 CPU(s): NUMA node253 CPU(s): NUMA node254 CPU(s): NUMA node255 CPU(s): That is, the possible/online NUMA node IDs are: 0, 8, 252, 253, 254, 255 In this case: num_possible_nodes() = 6 So memory is allocated for only 6 entries in current_path[]. However, the array is later indexed using the actual NUMA node ID. As a result, accesses such as: head->current_path[8] or head->current_path[252] goes out of bounds, leading to the following KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] Write of size 8 at addr c00020003bda35b8 by task kworker/u641:2/1997 CPU: 1 UID: 0 PID: 1997 Comm: kworker/u641:2 Not tainted 7.1.0-rc5-dirty #14 PREEMPT(lazy) Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Workqueue: async async_run_entry_fn Call Trace: [c000200037fa7510] [c0000000021c23d4] dump_stack_lvl+0x88/0xdc (unreliable) [c000200037fa7540] [c0000000009fda90] print_report+0x22c/0x67c [c000200037fa7630] [c0000000009fd508] kasan_report+0x108/0x220 [c000200037fa7740] [c0000000009fff48] __asan_store8+0xe8/0x120 [c000200037fa7760] [c008000018e76474] nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] [c000200037fa7800] [c008000018e6556c] nvme_update_ns_info+0x4a4/0x5e0 [nvme_core] [c000200037fa7a50] [c008000018e66270] nvme_alloc_ns+0x6d8/0x1a70 [nvme_core] [c000200037fa7c20] [c008000018e679fc] nvme_scan_ns+0x3f4/0x630 [nvme_core] [c000200037fa7d10] [c00000000031f22c] async_run_entry_fn+0x9c/0x3a0 [c000200037fa7db0] [c0000000002fa544] process_one_work+0x414/0xa10 [c000200037fa7ec0] [c0000000002fbf00] worker_thread+0x320/0x640 [c000200037fa7f80] [c00000000030d0f8] kthread+0x278/0x290 [c000200037fa7fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 Allocated by task 1997 on cpu 1 at 35.928317s: The buggy address belongs to the object at c00020003bda3000 which belongs to the cache kmalloc-rnd-15-2k of size 2048 The buggy address is located 16 bytes to the right of allocated 1448-byte region [c00020003bda3000, c00020003bda35a8) The buggy address belongs to the physical page: Memory state around the buggy address: c00020003bda3480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c00020003bda3500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >c00020003bda3580: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ^ c00020003bda3600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00020003bda3680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix this by allocating the flexible array using nr_node_ids instead of num_possible_nodes(). Since nr_node_ids represents the maximum possible NUMA node IDs, indexing current_path[] using numa_node_id() becomes safe even on systems with sparse node IDs. | 16 Oct |
| CVE-2026-72222 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin svc_xprt across the asynchronous TLS handshake callback svc_tcp_handshake() stores the raw svc_xprt pointer in tls_handshake_args.ta_data and submits the request through tls_server_hello_x509(). The handshake core takes only sock_hold(req->hr_sk); nothing references the embedding struct svc_sock that svc_tcp_handshake_done() reaches via container_of(). Two close races leave the in-flight callback writing through a freed svc_sock. svc_sock_free() calls tls_handshake_cancel() and discards its return value: a false return means handshake_complete() has already set HANDSHAKE_F_REQ_COMPLETED but hp_done() may not have finished, yet svc_sock_free() proceeds to kfree(svsk). The cancel-loser fall-through inside svc_tcp_handshake() itself produces the same window: when wait_for_completion_interruptible_timeout() returns <= 0 (timeout or signal) and tls_handshake_cancel() returns false, the function does not drain, returns, and svc_handle_xprt() calls svc_xprt_received(), which clears XPT_BUSY and can drop the last reference. A concurrent close then runs svc_sock_free() while svc_tcp_handshake_done() is still updating xpt_flags and walking svsk->sk_handshake_done. The corruption surfaces as set_bit/clear_bit RMW into the freed xpt_flags slab slot and as complete_all() walking and writing the freed wait_queue_head_t list embedded in sk_handshake_done -- a slab-corruption primitive, not a benign read. The path is reachable on any TLS-enabled NFS server whenever a connection close overlaps the tlshd downcall delivery window; the interruptible wait means signal delivery suffices, not just SVC_HANDSHAKE_TO expiry. Take svc_xprt_get(xprt) immediately before tls_server_hello_x509() so the in-flight callback owns its own reference. Release it on the two edges where the callback is guaranteed not to fire -- submission failure from tls_server_hello_x509() and a successful tls_handshake_cancel() -- and at the tail of svc_tcp_handshake_done() after complete_all(). [cel: rewrote commit message to describe the actual change] | 16 Oct |
| CVE-2025-68192 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixup Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 | 15 Oct |
| CVE-2023-54292 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP request done KCSAN detects a data race on cqp_request->request_done memory location which is accessed locklessly in irdma_handle_cqp_op while being updated in irdma_cqp_ce_handler. Annotate lockless intent with READ_ONCE/WRITE_ONCE to avoid any compiler optimizations like load fusing and/or KCSAN warning. [222808.417128] BUG: KCSAN: data-race in irdma_cqp_ce_handler [irdma] / irdma_wait_event [irdma] [222808.417532] write to 0xffff8e44107019dc of 1 bytes by task 29658 on cpu 5: [222808.417610] irdma_cqp_ce_handler+0x21e/0x270 [irdma] [222808.417725] cqp_compl_worker+0x1b/0x20 [irdma] [222808.417827] process_one_work+0x4d1/0xa40 [222808.417835] worker_thread+0x319/0x700 [222808.417842] kthread+0x180/0x1b0 [222808.417852] ret_from_fork+0x22/0x30 [222808.417918] read to 0xffff8e44107019dc of 1 bytes by task 29688 on cpu 1: [222808.417995] irdma_wait_event+0x1e2/0x2c0 [irdma] [222808.418099] irdma_handle_cqp_op+0xae/0x170 [irdma] [222808.418202] irdma_cqp_cq_destroy_cmd+0x70/0x90 [irdma] [222808.418308] irdma_puda_dele_rsrc+0x46d/0x4d0 [irdma] [222808.418411] irdma_rt_deinit_hw+0x179/0x1d0 [irdma] [222808.418514] irdma_ib_dealloc_device+0x11/0x40 [irdma] [222808.418618] ib_dealloc_device+0x2a/0x120 [ib_core] [222808.418823] __ib_unregister_device+0xde/0x100 [ib_core] [222808.418981] ib_unregister_device+0x22/0x40 [ib_core] [222808.419142] irdma_ib_unregister_device+0x70/0x90 [irdma] [222808.419248] i40iw_close+0x6f/0xc0 [irdma] [222808.419352] i40e_client_device_unregister+0x14a/0x180 [i40e] [222808.419450] i40iw_remove+0x21/0x30 [irdma] [222808.419554] auxiliary_bus_remove+0x31/0x50 [222808.419563] device_remove+0x69/0xb0 [222808.419572] device_release_driver_internal+0x293/0x360 [222808.419582] driver_detach+0x7c/0xf0 [222808.419592] bus_remove_driver+0x8c/0x150 [222808.419600] driver_unregister+0x45/0x70 [222808.419610] auxiliary_driver_unregister+0x16/0x30 [222808.419618] irdma_exit_module+0x18/0x1e [irdma] [222808.419733] __do_sys_delete_module.constprop.0+0x1e2/0x310 [222808.419745] __x64_sys_delete_module+0x1b/0x30 [222808.419755] do_syscall_64+0x39/0x90 [222808.419763] entry_SYSCALL_64_after_hwframe+0x63/0xcd [222808.419829] value changed: 0x01 -> 0x03 | 15 Oct |
| CVE-2023-54094 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: prevent skb corruption on frag list segmentation Ian reported several skb corruptions triggered by rx-gro-list, collecting different oops alike: [ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 62.631083] #PF: supervisor read access in kernel mode [ 62.636312] #PF: error_code(0x0000) - not-present page [ 62.641541] PGD 0 P4D 0 [ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364 [ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022 [ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858 ./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261 net/ipv4/udp_offload.c:277) [ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246 [ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000 [ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4 [ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9 [ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2 [ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9 [ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000) knlGS:0000000000000000 [ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0 [ 62.749948] Call Trace: [ 62.752498] <TASK> [ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398) [ 62.787605] skb_mac_gso_segment (net/core/gro.c:141) [ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2)) [ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862 net/core/dev.c:3659) [ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710) [ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330) [ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210) net/netfilter/core.c:626) [ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55) [ 62.825652] maybe_deliver (net/bridge/br_forward.c:193) [ 62.829420] br_flood (net/bridge/br_forward.c:233) [ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215) [ 62.837403] br_handle_frame (net/bridge/br_input.c:298 net/bridge/br_input.c:416) [ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387) [ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570) [ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638 net/core/dev.c:5727) [ 62.876795] napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067) [ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191) [ 62.893534] __napi_poll (net/core/dev.c:6498) [ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89 net/core/dev.c:6640) [ 62.905276] kthread (kernel/kthread.c:379) [ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314) [ 62.917119] </TASK> In the critical scenario, rx-gro-list GRO-ed packets are fed, via a bridge, both to the local input path and to an egress device (tun). The segmentation of such packets unsafely writes to the cloned skbs with shared heads. This change addresses the issue by uncloning as needed the to-be-segmented skbs. | 15 Oct |
| CVE-2022-50666 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix QP destroy to wait for all references dropped. Delay QP destroy completion until all siw references to QP are dropped. The calling RDMA core will free QP structure after successful return from siw_qp_destroy() call, so siw must not hold any remaining reference to the QP upon return. A use-after-free was encountered in xfstest generic/460, while testing NFSoRDMA. Here, after a TCP connection drop by peer, the triggered siw_cm_work_handler got delayed until after QP destroy call, referencing a QP which has already freed. | 15 Oct |
| CVE-2025-59953 | 9.8 critical | 1.0% | no CPE yet | LMDeploy is a toolkit for compressing, deploying, and serving large language models. Starting in version 0.9.1 and prior to version 0.10.2, the LMdeploy implements an rpc server (AsyncRPCServer in zmq_rpc.py) for supporting the RPC communications. In its core functionality call_and_response(), I found it will directly use the pickles.loads() to deserialize the received messages without any sanitization, hence resulting in a remote code execution vulnerability by this RPC server. Version 0.10.2 contains a patch. | 14 Oct |
| CVE-2025-10742 | 9.8 critical | 1.0% | no CPE yet | The Truelysell Core plugin for WordPress is vulnerable to Arbitrary User Password Change in versions up to, and including, 1.8.6. This is due to the plugin providing user-controlled access to objects, letting a user bypass authorization and access system resources. This makes it possible for unauthenticated attackers to change user passwords and potentially take over administrator accounts. Note: This can only be exploited unauthenticated if the attacker knows which page contains the 'truelysell_edit_staff' shortcode. | 8 Oct |
| CVE-2026-50380 | 9.6 critical | 1.0% | microsoft, windows 10 version 1607, windows 10 version 1809, windows 10 version 21h2 | Heap-based buffer overflow in Windows GDI+ allows an unauthorized attacker to execute code over a network. | Wed 28 Oct |
| CVE-2026-40076 | 9.4 critical | 1.0% | openmrs | OpenMRS Core is an open source electronic medical record system platform. In versions 2.7.8 and earlier and versions 2.8.0 through 2.8.5, the module upload endpoint at POST `/openmrs/ws/rest/v1/module` is vulnerable to a Zip Slip path traversal attack. During automatic extraction of uploaded .omod archives in `WebModuleUtil.startModule()`, ZIP entries under web/module/ are checked only to see whether the full entry path starts with `..,` and the remaining path is then concatenated into the destination path without normalization or a boundary check. A crafted archive can therefore include entries such as `web/module/../../../../malicious.jsp` and cause files to be written outside the intended module directory. An authenticated attacker with module upload access can write arbitrary files to locations such as the web application root and achieve remote code execution by uploading a JSP file and then requesting it. The issue is compounded by the fact that the module.allow_web_admin runtime property is enforced in the legacy UI controller but not in the REST API upload path, so deployments relying on that property to block web-based module administration remain exposed through the REST endpoint. This issue has been fixed in versions after 2.7.8 in the 2.7.x line and in version 2.8.6 and later. | Mon 26 Oct |
| CVE-2026-88092 | 9.4 critical | 1.0% | microsoft, asp.net_core, visual_studio_2022, visual_studio_2026 | Inconsistent interpretation of http requests ('http request/response smuggling') in ASP.NET Core allows an unauthorized attacker to perform tampering over a network. | 16 Oct |
| CVE-2026-110631 | 9.3 critical | 1.0% | no CPE yet | Komodo through 2.3.3 contains an authentication bypass vulnerability in the Periphery agent that allows unauthenticated attackers to connect as a trusted Core because empty core_public_keys and passkeys lists fail open by default. Attackers reaching port 8120 can present any generated keypair to issue Periphery API requests, including terminal sessions and container operations, executing commands on managed hosts typically as root. | 20 Oct |
| CVE-2026-111690 | 9.3 critical | 1.0% | no CPE yet | Simple Admin Core through 1.8.7 contains an authentication bypass vulnerability that allows unauthenticated attackers to forge super administrator tokens by using the hard-coded Auth.AccessSecret in api/etc/core.yaml. Attackers can sign a JWT with the public secret and roleId claim 001 to gain full administrative control over users, roles, menus, API authorities, configuration and tokens. | 19 Oct |
| CVE-2026-102989 | 9.3 critical | 1.0% | no CPE yet | TanStack Router is a client-first, server-capable, fully type-safe router and full-stack framework for the web. From 1.143.12 until 1.169.39 for @tanstack/start-server-core, 1.168.60 for @tanstack/react-start, 1.168.57 for @tanstack/solid-start, and 1.168.56 for @tanstack/vue-start, an unauthenticated attacker can place non-public fields in a server-function request payload so that attacker-controlled middleware state reaches the error path and a response-shaped object is accepted as an HTTP response. A crafted server-function URL can therefore return attacker-controlled HTML from the application's origin; when a visitor opens the URL, the injected script can access same-origin data and issue requests with the visitor's authority. This issue is fixed in @tanstack/start-server-core 1.169.39, @tanstack/react-start 1.168.60, @tanstack/solid-start 1.168.57, and @tanstack/vue-start 1.168.56. | 16 Oct |
| CVE-2026-85440 | 9.3 critical | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 contains a pre-authentication heap overflow vulnerability in MOOSCommPkt packet handling that allows remote attackers to write arbitrary data by declaring a negative packet length. Attackers can exploit the signed integer check in InflateTo() and negative size conversion in recv() to overflow a four-byte heap buffer during the HandShake phase before authentication. | 14 Oct |
| CVE-2026-85424 | 9.3 critical | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 lacks authentication in the wire protocol, allowing unauthenticated clients to connect with full publish, subscribe, and database clear privileges. Attackers can bypass the compile-time protocol string check and connect with arbitrary client names to execute privileged operations including DB_CLEAR which resets all variables and clears client mail queues. | 14 Oct |
| CVE-2026-85428 | 9.3 critical | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 contains an authentication bypass vulnerability in the optional MOOSDB HTTP server that allows unauthenticated clients to write variables. Attackers can send HTTP requests with variable names and values to the MOOSDB HTTP server port to modify MOOS variables including actuator and override commands without authentication. | 14 Oct |
| CVE-2026-77915 | 9.3 critical | 1.0% | no CPE yet | rConfig Core 8.0.0 before 8.2.10 contains an authentication bypass vulnerability that allows unauthenticated attackers to self-register accounts with full Administrator privileges due to a duplicate bare Auth::routes() call in routes/web.php that re-enables the POST /register route after it was explicitly disabled. Attackers can register a new account that is immediately authenticated with Admin-level access because the registration controller does not assign a role and the users.role column defaults to Admin, enabling access to stored device credentials, user data, and API token issuance. | 14 Oct |
| CVE-2026-78676 | 9.3 critical | 1.0% | gitpython_project, gitpython | GitPython before 3.1.59 fails to safely re-serialize multi-line git-config values during write operations, corrupting dormant quoted values into injected directives like core.hooksPath. Attackers can craft config files with embedded newlines that become live git directives after any unrelated GitPython config write, enabling arbitrary code execution via hook invocation. | 12 Oct |
| CVE-2026-48024 | 9.1 critical | 1.0% | wazuh | Wazuh is a free and open source platform used for threat prevention, detection, and response. From 4.0.0 until 4.14.6 and 5.0.0-beta3, cluster.unmerge_info() in framework/wazuh/core/cluster/cluster.py constructs paths from peer-controlled merge_type and name values in a merged synchronization archive. process_files_from_worker() in framework/wazuh/core/cluster/master.py does not adequately confine the resulting path to the declared cluster item directory. A cluster peer holding the shared Fernet key can use traversal in files_metadata.json or a merged-file header to write files such as /var/ossec/etc/ossec.conf. Replacing ossec.conf can configure root-executed commands and lead to code execution when Wazuh services reload. This issue is fixed in versions 4.14.6 and 5.0.0-beta3. | Mon 26 Oct |
| CVE-2026-48162 | 9.1 critical | 1.0% | wazuh | Wazuh is a free and open source platform used for threat prevention, detection, and response. From 4.0.0 until 4.14.6 and 5.0.0-beta3, DistributedAPI.send_tmp_file() in framework/wazuh/core/cluster/dapi/dapi.py joins an attacker-controlled tmp_file value to WAZUH_PATH without canonicalization or confinement. A cluster peer holding the shared Fernet key can use traversal or an absolute path to make the master return any readable file over the cluster channel. Reading /var/ossec/api/configuration/security/private_key.pem allows the peer to forge administrator REST API tokens offline and then exercise administrative privileges without creating an account. This issue is fixed in versions 4.14.6 and 5.0.0-beta3. | Mon 26 Oct |
| CVE-2026-49441 | 9.1 critical | 1.0% | wazuh | Wazuh is a free and open source platform used for threat prevention, detection, and response. From 4.3.0 until 4.14.6 and 5.0.0-beta3, the non-merged branch of process_files_from_worker() in framework/wazuh/core/cluster/master.py trusts a peer-controlled file_path key from files_metadata.json. The destination is joined to WAZUH_PATH without proving that it remains inside the directory selected by cluster_item_key. A cluster peer holding the shared Fernet key can upload a crafted extra-valid archive and overwrite security-sensitive files such as /var/ossec/etc/ossec.conf. Replacing ossec.conf can configure root-executed commands and lead to code execution after a service reload. This issue is fixed in versions 4.14.6 and 5.0.0-beta3. | Mon 26 Oct |
| CVE-2026-64609 | 9.1 critical | 1.0% | apache, fory | Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected. This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | Sat 24 Oct |
| CVE-2026-47731 | 9.1 critical | 1.0% | no CPE yet | The AMMOS Instrument Toolkit (Formerly the Bespoke Links to Instruments for Surface and Space (BLISS)) is a Python-based software suite developed to handle Ground Data System (GDS), Electronic Ground Support Equipment (EGSE), commanding, telemetry uplink/downlink, and sequencing for instrument and CubeSat Missions. In versions prior to 2.6.1 and in version 3.1.0, the Binary Stream Capture (BSC) component exposes an unauthenticated HTTP API for dynamically creating packet capture "handlers." Because the code blindly trusts path‑related form fields, a remote client can bypass the configured log root and direct BSC to log to arbitrary filesystem paths (path traversal / directory escape), and append attacker‑controlled data to those files, using the privileges of the`ait-bsc` process. There are two ways for a remote attacker to trigger this. First, if the attacker has access to the network where `ait-bsc` is deployed (a reason for that could be that the ports are publicly accessible), the payloads can be directly sent to the server to trigger the arbitrary file append. This type of attack is demonstrated in `python_poc.py`. Second, even if the attacker does not have direct access to the network because the software is running in a local network, it is possible to exploit this if a bad actor in that network opens an attacker-controlled website (which might be a website created by an attacker, or a third-party website compromised by the attacker). The browser javascript can automatically send the requests necessary to exploit this into the local network. This is even possible if the server is only accessible on `localhost`. This type of attack is demonstrated by `attacker_tcp.py` and `test1.html` (first launch the attacker TCP server, then start a webserver to host `test1.html`, for example using `python3 -m http.server 7000`, and open `test1.html`).This issue affects BSC (Binary Stream Capture) and usage of the ait-bsc server. This impacts AIT-Core versions before 3.1.1, from 2.x before 2.6.1. Users are recommended to upgrade to version 3.1.1 or 2.6.1. | Sat 24 Oct |
| CVE-2025-68665 | 9.1 critical | 1.0% | langchain, langchain.js, langchain\/core | LangChain is a framework for building LLM-powered applications. Prior to @langchain/core versions 0.3.80 and 1.1.8, and prior to langchain versions 0.3.37 and 1.2.3, a serialization injection vulnerability exists in LangChain JS's toJSON() method (and subsequently when string-ifying objects using JSON.stringify(). The method did not escape objects with 'lc' keys when serializing free-form data in kwargs. The 'lc' key is used internally by LangChain to mark serialized objects. When user-controlled data contains this key structure, it is treated as a legitimate LangChain object during deserialization rather than plain user data. This issue has been patched in @langchain/core versions 0.3.80 and 1.1.8, and langchain versions 0.3.37 and 1.2.3 | 19 Oct |
| CVE-2026-70188 | 9.1 critical | 1.0% | no CPE yet | Inconsistent interpretation of http requests ('http request/response smuggling') in ASP.NET Core allows an unauthorized attacker to bypass a security feature over a network. | 19 Oct |
| CVE-2026-90414 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything furth ---truncated--- | 19 Oct |
| CVE-2026-92097 | 9.1 critical | 1.0% | no CPE yet | The Click to Chat for WhatsApp plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in versions up to, and including, 4.44 This is due to the greetings_dialog() function building the {url} template placeholder from a sanitize_text_field()-filtered $_SERVER['REQUEST_URI'] on archive pages and then passing the substituted greeting content to do_shortcode() in the greetings-1 and greetings-2 templates, without stripping shortcode delimiters. Because wp_kses() runs against main_content BEFORE the {url} substitution, the attacker-controlled URL bytes reach do_shortcode() unfiltered. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes registered by WordPress core, the active theme, or any other plugin (e. | 15 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.