Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
CVSS unscored ×
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-86589 | unscored | 0.00% | no CPE yet | Incorrect implementation of authentication algorithm vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. A flaw in the User Center login integration can cause a newly created external user session to omit its external identity, allowing subsequent requests to bypass central account suspension or deletion checks until the session expires or is revoked. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | Fri 30 Oct |
| CVE-2026-108780 | unscored | 0.00% | no CPE yet | Potential JDBC source configuration validation vulnerability in Apache Kylin. The impact is minor, unless the kylin backend services are open to public network. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | Fri 30 Oct |
| CVE-2026-108776 | unscored | 0.00% | no CPE yet | Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Apache Kylin. The impact is moderate if kylin service is in query only mode, which is the default and most common mode. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | Fri 30 Oct |
| CVE-2026-108771 | unscored | 0.00% | no CPE yet | Missing authentication for in-house broadcast and polymorphic deserialization vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | Fri 30 Oct |
| CVE-2026-107929 | unscored | 0.00% | no CPE yet | When `CURLOPT_INTERFACE` (or the command line tool's `--interface` option) is set with one of the documented prefixes (`if!`, `host!`, `ifhost!`), that binding is not part of the connection reuse key, so a later transfer asking for a different source can silently reuse an existing connection and go out from the earlier transfer's source address | Fri 30 Oct |
| CVE-2026-108766 | unscored | 0.00% | no CPE yet | Missing authorization on jdbc source config update in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | Fri 30 Oct |
| CVE-2026-108764 | unscored | 0.00% | no CPE yet | Server-Side request forgery (SSRF) vulnerability in Apache Kylin. Impact most to the kylin job service that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | Fri 30 Oct |
| CVE-2026-108762 | unscored | 0.00% | no CPE yet | Path-confinement bypass during metadata backup deletion in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | Fri 30 Oct |
| CVE-2026-107928 | unscored | 0.00% | no CPE yet | When curl is built with GnuTLS, a malicious WebSocket server can make curl send memory past its send buffer. This is due to an out of bounds read following when `gnutls_record_send()` returns a number of bytes sent **greater than the number of bytes it was given to send**. GnuTLS does that after a blocked send. | Fri 30 Oct |
| CVE-2026-94266 | unscored | 0.00% | no CPE yet | libcurl could accidentally return a URL for `curl_easy_getinfo()`'s `CURLINFO_EFFECTIVE_URL` option containing credentials, even though neither the URL provided to libcurl nor the redirected URL did. | Fri 30 Oct |
| CVE-2026-94265 | unscored | 0.00% | no CPE yet | When processing an HTTP redirect to a URL containing userinfo (a `username:password` component), curl might erroneously retain and re-transmit the original host's HTTP Negotiate authentication state. Consequently, a malicious server can trigger a redirect containing arbitrary userinfo to force curl to send a freshly minted Kerberos ticket—generated using the ambient identity of the client process to an untrusted third-party host, effectively bypassing the domain-scoping restrictions normally enforced by the absence of `--location-trusted`. | Fri 30 Oct |
| CVE-2026-92391 | unscored | 0.00% | no CPE yet | A deeply nested multipart MIME structure constructed via the public API causes a stack overflow in libcurl during normal cleanup operations. An excessive recursion depth within `curl_mime_free` leads to unbounded stack frame allocation during structure traversal, ultimately crashing the host process. | Fri 30 Oct |
| CVE-2025-49602 | unscored | — | no CPE yet | An issue was discovered in Keyfactor EJBCA 9. When an administrator is removed from its administrator role while having a valid TLS session, EJBCA may, in certain circumstances, cache authentication for longer than the configured maximum time (default: 30 seconds), which results in the former administrator retaining access that they should no longer have. | Fri 30 Oct |
| CVE-2026-92390 | unscored | 0.00% | no CPE yet | When invoked with `--remote-header-name` (`-J`), curl fails to preserve its documented anti-clobbering protection if an intermediate 103 Early Hints response precedes the final HTTP response, or if an `ETag` header is processed before `Content-Disposition` under `--etag-save`. This flaw allows an HTTP(S) server to overwrite an existing local file specified in the `Content-Disposition` header despite the presence of the `-J` non-overwrite constraint. | Fri 30 Oct |
| CVE-2026-94140 | unscored | 0.00% | no CPE yet | Rex versions through 1.16.1 for Perl accept an unknown SSH host key for remote rsync transfers because sync hardcodes StrictHostKeyChecking=no. Every remote branch of sync builds its ssh command with that option, for password authentication, for private-key authentication and for the fallback. The ssh options a caller sets through set_openssh_opt reach the OpenSSH transport but not this command, so there is no configuration that restores host key checking for the transfer. An attacker who can redirect the connection before the real host key is known presents their own and the transfer proceeds: under password authentication sync sends the connection password to that server, an upload writes the selected local files to it, and a download writes what it returns to the local destination. | Fri 30 Oct |
| CVE-2026-113811 | unscored | 0.00% | no CPE yet | Algorithm::UrataniTakeda versions from 0.1.5 before 0.1.7 for Perl allow memory exhaustion via a never-cleared failure shift cache in search. The failure shift is cached for each pair of trie state and text character in a field of the matcher object, and nothing clears it. A character not seen before at a given state adds an entry that lasts for the life of the matcher. An attacker who can submit text with many distinct characters to a long-lived matcher can grow its memory with each search. | Fri 30 Oct |
| CVE-2026-82987 | unscored | 0.00% | no CPE yet | There exists a screen capture endpoint in vCast media streaming service in ViewSonic ViewBoard unknown allows a remote, unauthenticated attacker to capture and exfiltrate the current screen content via GET requests to an unauthenticated /snapshot or /screen endpoint returning JPEGs | Fri 30 Oct |
| CVE-2026-114463 | unscored | 0.00% | no CPE yet | The webhook platform gateway in Nous Research Hermes Agent versions builds the session chat_id as webhook:{route_name}:{delivery_id} and re-derives the authorizing route by splitting that string, so a route name containing a ":" resolves toolset authorization to a different, higher-privileged prefix route than the one authenticated, which allows a remote attacker with the target HMAC to gain that higher-privileged route's toolsets. | Fri 30 Oct |
| CVE-2026-87768 | unscored | — | no CPE yet | DateTime::Lite versions before 0.8.1 for Perl allow CPU exhaustion via a per-day loop when adding seconds. _normalize_leap_seconds crosses day boundaries one day at a time, so add(seconds => $n) on an object with a non-floating time zone takes about |$n|/86400 iterations, and nothing limits $n. The XS implementation and the pure-Perl fallback both have the loop. An attacker who controls the number of seconds added can keep the process busy for as long as they choose. | Fri 30 Oct |
| CVE-2026-118988 | unscored | — | no CPE yet | CallBackery versions before 0.60.1 for Perl let unauthenticated clients read the POD of any file via path traversal in the /doc route. Every CallBackery application mounts its documentation plugin at /doc, ahead of any session check. The route passes the requested name to Pod::Simple::Search->find without validation. find splits the name on "::" and joins the parts into a file path, so a name such as "..::..::..::etc::motd" escapes @INC. Any file the server process can read is reachable. Only POD is rendered, but a file with a POD directive and no "=cut" is POD to the end of the file. | Fri 30 Oct |
| CVE-2026-116130 | unscored | — | no CPE yet | HTTP::Parser::XS versions before 0.18 for Perl truncate PATH_INFO at an encoded NUL byte in parse_http_request. The XS parser URL-decodes the request path and measures the result with strlen(), so PATH_INFO ends at the first byte decoded from %00. The pure-Perl backend is not affected. A remote attacker can send a path that a proxy or filter checks in full while the application routes on a shorter one. | Fri 30 Oct |
| CVE-2026-117349 | unscored | — | no CPE yet | Bitcoin Core prior to 29.5, 30.4, 31.2 and 32.1 is vulnerable to an OOM issue. | Fri 30 Oct |
| CVE-2026-86147 | unscored | 0.00% | no CPE yet | External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time. Root Cause: 1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory. 2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time. Affected Scenarios: Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3523 Note: After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner. | Fri 30 Oct |
| CVE-2026-86146 | unscored | 0.00% | no CPE yet | Inconsistent interpretation of HTTP requests (HTTP request/response smuggling) in the bundled HTTP/1.1 parser of Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to smuggle requests and inject headers when bRPC is deployed behind a proxy or load balancer that parses the same bytes differently. Root Cause: The bRPC fork of http-parser accepts and acts on several HTTP/1.1 header forms that a conforming front-end either rejects or interprets differently, so the framing or the header set of a message can differ between the front-end and bRPC: 1. A space before the colon of framing headers (e.g. Content-Length : 5) is accepted; the value still drives bRPC's framing while the reported field name contains the trailing space. 2. Interior spaces inside a Content-Length value (e.g. Content-Length: 1 3) are skipped, so bRPC reads 13 where a front-end reads 1 or rejects the message (same class as CVE-2022-32213 in Node.js). 3. Obsolete line folding (obs-fold, RFC 7230 3.2.4) of Content-Length and Transfer-Encoding values is accepted, so a folded framing value drives bRPC's framing while a front-end that does not unfold sees a different message. 4. Chunked trailer fields are fed to the same header callbacks as the header section and are merged into the header map like real headers. A front-end only inspects the header section, so any chunked request can smuggle fields such as Authorization or X-Forwarded-For past it. 5. Transfer-Encoding lists with optional whitespace after a comma (e.g. Transfer-Encoding: gzip, chunked) are not recognized as chunked: such requests are rejected, and responses are read until connection close instead of as chunked, causing response desync. Affected Scenarios: bRPC server or client communicating over HTTP/1.1 with a front proxy, load balancer, or any peer that parses the message independently. An attacker able to send requests through the front-end can desynchronize the two parsers to smuggle requests, forge headers (e.g. Authorization, X-Forwarded-For) via chunked trailers, or desynchronize responses. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3521 Note: After applying the fix, the four header forms above are rejected by default and chunked trailers are dropped instead of merged into the header map. Two gflags are provided for compatibility: http_allow_obs_fold=true restores acceptance of folded Content-Length/Transfer-Encoding values, and http_strict_header_token=true additionally rejects spaces inside any header field name (not only the ones that decide framing). Legitimate clients that do not use these obsolete forms are unaffected. | Fri 30 Oct |
| CVE-2026-84748 | unscored | 0.00% | no CPE yet | Improper authorization in Apache bRPC (versions < 1.18.0) on all platforms allows remote attackers to access builtin services through the public port. Root Cause: ServerOptions.internal_port is documented to make builtin services (and Tabbed services) reachable only from the internal port, and the HTTP/h2 dispatch path enforced this. However, all protobuf-based protocol dispatch paths (baidu_std, hulu_pbrpc, sofa_pbrpc, and the nshead-based protocols public_pbrpc, nshead_mcpack, nova_pbrpc and ubrpc2pb) computed the security_mode flag but never enforced it between method resolution and method invocation. Since builtin services share the method map with user services, a client able to reach the public port could invoke builtin services such as brpc.vars or hotspots by name over these pb protocols and disclose sensitive runtime information (metrics, flags, profiler data) that the operator intended to expose only via the internal port. Affected Scenarios: Use a bRPC server with ServerOptions.internal_port configured (or with builtin/Tabbed services otherwise expected to be gated by it) while the public port is reachable from an untrusted network and any pb-based protocol is enabled. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3511 | Fri 30 Oct |
| CVE-2026-84747 | unscored | 0.00% | no CPE yet | Interpretation conflict in the HTTP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to bypass access control rules enforced by a front proxy. Root Cause: The method dispatch function FindMethodPropertyByURI() in bRPC's HTTP protocol splits the request path with a string splitter that skips empty fields, so paths containing empty path segments (consecutive slashes), such as //flags, /flags// and /flags//port, are dispatched to the same method as their collapsed form /flags. Per RFC 3986 these are distinct paths. A front proxy that enforces an ACL (e.g. blocking access to builtin services such as /flags) matches the collapsed form only, and therefore forwards the padded literal to the bRPC server, where it is dispatched as if it were the collapsed form. This differential allows //flags?setvalue= to reach a builtin service that /flags is not allowed to reach. Additionally, the HTTP/2 implementation never validated the :path pseudo-header, so requests without a :path, or with a :path that neither begins with '/' nor is the asterisk-form '*', contrary to RFC 9113 section 8.3.1, were not rejected. Affected Scenarios: Deployments of Apache bRPC behind a front proxy or gateway that performs access control (ACL) decisions on the literal request path, where the bRPC server accepts HTTP or HTTP/2 traffic from that proxy. In such deployments an attacker can send a path containing empty path segments to reach a resource that the front proxy intended to block. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3512 Note: After applying the fix, HTTP and HTTP/2 request paths containing empty path segments (consecutive slashes) are rejected by default, and HTTP/2 :path values that are empty or neither begin with '/' nor equal '*' are rejected. Deployments that depend on the previous lenient behavior can restore it by turning on the gflag -http_allow_empty_path_segments, which is not recommended for servers exposed to untrusted traffic. | Fri 30 Oct |
| CVE-2026-82942 | unscored | 0.00% | no CPE yet | A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime. Root Cause: When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact). Affected Scenarios: Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3505 | Fri 30 Oct |
| CVE-2026-82425 | unscored | 0.00% | no CPE yet | A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service. Root Cause: When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well). Affected Scenarios: Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3510 Note: After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. | Fri 30 Oct |
| CVE-2026-82231 | unscored | 0.00% | no CPE yet | A Thrift client in Apache bRPC (version < 1.18.0, built with WITH_THRIFT which is off by default) can be crashed by the server peer it talks to. When the server returns a T_EXCEPTION reply whose exception struct is malformed, the client decodes it without catching what Apache Thrift throws (TProtocolException, TTransportException or std::length_error). The exception unwinds out of the bthread task function and the process calls std::terminate(), terminating the whole process along with every other in-flight RPC. This is the client response path, so the adversary is the server peer, which THREAT_MODEL.md treats as untrusted. It requires a WITH_THRIFT build (off by default). How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3500 | Fri 30 Oct |
| CVE-2026-117346 | unscored | — | no CPE yet | Bitcoin Core through 31.1 is vulnerable to Denial of Service via undo files having no size limit | Fri 30 Oct |
| CVE-2026-82210 | unscored | 0.00% | no CPE yet | Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame. Root Cause: When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service. Affected Scenarios: Use bRPC server with the streaming control feature (Stream API) served from untrusted network. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3494 The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled. | Fri 30 Oct |
| CVE-2026-81755 | unscored | 0.00% | no CPE yet | Uncontrolled resource consumption in the streaming RPC component of Apache bRPC (version < 1.18.0) allows a remote attacker to exhaust server memory and cause denial of service by sending a single RPC request that declares an excessive number of streams. Root Cause: In the streaming RPC feature, a client can declare multiple streams in one RPC request by putting extra stream identifiers into the repeated field `stream_settings.extra_stream_ids` of the RPC meta. On the server side, `StreamAccept` creates one response stream for every stream identifier declared by the request, without limiting the number of streams accepted in a single RPC. The request body size is only bounded by `max_body_size` (default 64MB), which is enough to carry millions of stream identifiers. Each accepted stream allocates its own bthread execution queue and associated resources, so a single crafted request can make the server create a huge number of streams and exhaust memory, leading to denial of service. Affected Scenarios: Use a bRPC server that serves streaming RPC and calls `StreamAccept` to accept streams from untrusted clients. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to the 1.18.0 version. 2. Apply this patch: https://github.com/apache/brpc/pull/3493 Note: The fix adds a new gflag `stream_max_streams_per_request` with a default value of 64. Requests declaring more streams than the limit are rejected before any response stream is created. Applications that legitimately need to accept more than 64 streams in one RPC must raise this flag; otherwise such requests will fail after applying the fix. | Fri 30 Oct |
| CVE-2026-80463 | unscored | 0.00% | no CPE yet | Unbounded memory accumulation in the stream message reassembly path of Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to exhaust the memory of a server (denial of service) by sending an endless sequence of continuation data frames. Root Cause: The streaming RPC protocol bounds every single data frame by max_body_size, but a fragmented stream message accumulates continuation frames into one buffer (_pending_buf) without any limit on the accumulated size. A malicious peer that can open a stream can therefore keep sending continuation frames to make the receiver accumulate an arbitrarily large in-memory message. Since the default flow-control settings (socket_max_streams_unconsumed_bytes=0) do not throttle the sending rate, the receiver's memory grows until the process runs out of memory and crashes or becomes unavailable. Affected Scenarios: Services that accept streams from untrusted clients (for example using brpc::StreamAccept or brpc::StreamCreate with the built-in streaming protocol) are affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3489 Note: The fix limits the accumulated payload of a fragmented stream message to max_body_size (default 64MB). When the accumulated payload exceeds the limit, the pending fragments are released and the stream is closed with error EMSGSIZE. After applying the fix, legitimate fragmented stream messages larger than max_body_size will be rejected; you can adjust the gflag max_body_size to change the limit. | Fri 30 Oct |
| CVE-2026-61916 | unscored | 0.00% | no CPE yet | Out-of-bounds reads in URL parsing and case-insensitive header lookup in Apache bRPC before version 1.18.0 on platforms where plain char is unsigned, such as ARM64, allow remote attackers to cause a process crash and denial of service by sending crafted input containing bytes with the high bit set. Root Cause: Two 256-entry lookup tables are accessed through pointers biased by 128 so that valid indices are in the range -128 to 127. Input bytes are promoted from plain char to int without first normalizing them to the signed-char range. On affected platforms, bytes in the range 0x80 to 0xFF therefore become indices 128 to 255 and read up to 127 bytes beyond the end of the underlying tables. Affected Scenarios: A remotely accessible bRPC HTTP server on an affected platform can reach the vulnerable URL lookup through an unauthenticated request URI containing a high-bit byte. The case-insensitive lookup is also reachable when untrusted header names are processed through APIs such as the HTTP/2 HPACK path. HTTP/1 header names containing high-bit bytes are rejected by the HTTP/1 parser before reaching the vulnerable lookup. Builds where plain char is signed, which commonly include x86_64 builds, are not affected by this issue. How to Fix: Choose one of the following options: 1. Upgrade Apache bRPC to version 1.18.0 or later. 2. Apply the patch from https://github.com/apache/brpc/pull/3376 . The fix normalizes lookup-table indices to the signed-char range before accessing the biased tables. | Fri 30 Oct |
| CVE-2026-61902 | unscored | 0.00% | no CPE yet | Apache bRPC versions before 1.18.0 do not consistently enforce the configured max_body_size limit in non-progressive HTTP/1 and HTTP/2 parsing and in memcache and couchbase response parsing. A remote unauthenticated peer can cause an affected process to buffer message data beyond the configured limit, which may lead to memory exhaustion and denial of service. Users should upgrade to 1.18.0 or apply the patch from PR https://github.com/apache/brpc/pull/3382 . The fix rejects oversized buffered HTTP bodies, returns HTTP 413 for HTTP/1 requests, resets oversized HTTP/2 streams, and rejects oversized memcache and couchbase responses from their declared lengths. Progressive HTTP reading remains supported because it uses bounded buffering. | Fri 30 Oct |
| CVE-2026-58064 | unscored | 0.00% | no CPE yet | The Redis protocol implementation in Apache bRPC allowed inline command parsing to allocate and copy the full connection buffer before a complete CRLF-terminated command was available. A remote attacker with access to a Redis-protocol bRPC service could send long inline inputs without a terminating CRLF to increase memory usage and CPU copy overhead, potentially causing denial of service. Root Cause: The Redis inline command parser allocated memory based on the current input buffer size and copied the entire buffer before determining the current inline command boundary. The existing redis_max_allocation_size limit was applied to RESP bulk strings and arrays, but not effectively to the inline command path before allocation. Affected Scenarios: Use Apache bRPC server with Redis protocol enabled and reachable by untrusted clients. How to Fix: 1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue. 2. Apply the patch from PR https://github.com/apache/brpc/pull/3363 . Note: The fix applies redis_max_allocation_size to Redis inline command lines and scans for CRLF before allocating parser arena memory. Inline command lines exceeding this limit are rejected. | Fri 30 Oct |
| CVE-2026-117350 | unscored | — | no CPE yet | Bitcoin Core prior to 29.5, 30.4, 31.2 and 32.1 is vulnerable to an OOM issue. | Fri 30 Oct |
| CVE-2026-49116 | unscored | — | no CPE yet | This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | Fri 30 Oct |
| CVE-2026-13002 | unscored | 0.00% | no CPE yet | Rejected as this CVE is duplicate to CVE-2026-4890. | Fri 30 Oct |
| CVE-2026-49115 | unscored | — | no CPE yet | This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | Fri 30 Oct |
| CVE-2026-56388 | unscored | 0.00% | no CPE yet | The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process. Root Cause: RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty. Affected Scenarios: Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3354 Note: The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. | Fri 30 Oct |
| CVE-2026-56387 | unscored | 0.00% | no CPE yet | The RTMP AMF parser in Apache bRPC accepts AMF string lengths and array counts directly from untrusted input. A remote unauthenticated attacker who can reach a bRPC server with RTMP enabled can send a small AMF payload with an excessive declared long string length or array count, causing excessive memory allocation or resource consumption before the parser rejects the incomplete payload. Root Cause: The AMF long string parser resized the destination string to the declared 32-bit length before validating that the stream contained that many bytes. ECMA array and strict array parsers also accepted 32-bit element counts without a configurable upper bound. Affected Scenarios: Deployments that enable the bRPC RTMP server component and accept RTMP traffic from untrusted clients. Direct uses of the AMF parser on untrusted data are also affected. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3353 Note: The fix introduces configurable AMF parsing limits. The default maximum string size is 64 MiB and the default maximum array element count is 1,048,576. Payloads above these limits are rejected. The limits can be adjusted with amf_max_string_size and amf_max_array_size. | Fri 30 Oct |
| CVE-2026-54427 | unscored | 0.00% | no CPE yet | Uncontrolled recursion in the AMF parser in Apache bRPC < 1.18.0 allows a remote RTMP peer to crash a bRPC process by sending deeply nested AMF objects or arrays. The parser recursively processed nested AMF containers without enforcing a depth limit, which could exhaust the native stack. Affected Scenarios: Applications using bRPC RTMP support and parsing AMF data from an untrusted RTMP peer. This includes RTMP servers parsing client command messages, RTMP clients parsing server responses or status messages, and either side parsing inbound AMF script data such as metadata or cue points. Direct callers of ReadAMFObject or ReadAMFArray on untrusted input are also affected. How to Fix: 1. Upgrade Apache bRPC to 1.18.0. 2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 . Note: The fix introduces a configurable AMF nesting depth limit with default value 128. AMF objects or arrays deeper than amf_max_depth are rejected after applying the fix. | Fri 30 Oct |
| CVE-2026-54426 | unscored | 0.00% | no CPE yet | Uncontrolled recursion in the Redis reply parser in Apache bRPC < 1.18.0 allows a remote Redis server peer to crash a bRPC Redis client process by returning a deeply nested RESP array reply. The parser recursed once for each nested array level without enforcing a depth limit. The fix adds a configurable Redis reply depth limit with default value 128 and rejects replies exceeding that limit. Affected Scenarios: Applications using bRPC as a Redis client with ChannelOptions.protocol="redis" and receiving replies from an untrusted or faulty Redis server peer. How to Fix: 1. Upgrade Apache bRPC to 1.18.0. 2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 . Note: After applying the fix, Redis replies with array nesting deeper than redis_max_reply_depth are rejected. | Fri 30 Oct |
| CVE-2026-54425 | unscored | 0.00% | no CPE yet | Uncontrolled recursion in the HTTP/2 HPACK decoder in Apache bRPC before 1.18.0 allows remote attackers to cause denial of service by sending a crafted HTTP/2 header block containing many consecutive Dynamic Table Size Update entries. Each update was decoded by recursively invoking the HPACK decoder, which could exhaust the thread stack before a header field or end of input was reached. Root Cause: The bRPC HPACK decoder recursively decoded the next entry after processing a Dynamic Table Size Update. The decoder did not bound the recursion depth, so a long sequence of update entries could consume excessive stack space. Affected Scenarios: Use bRPC with the built-in HTTP/2 implementation to accept HTTP/2 traffic from an untrusted network. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3343 Note: The fix changes HPACK Dynamic Table Size Update decoding to use iterative parsing instead of recursive parsing. | Fri 30 Oct |
| CVE-2026-48830 | unscored | 0.00% | no CPE yet | Improper authentication in Apache bRPC through 1.17.0 allows a remote unauthenticated attacker to bypass authentication for protected non-builtin HTTP endpoints by first sending a builtin HTTP request on the same HTTP/1.1 keep-alive connection. When ServerOptions.auth is enabled and builtin HTTP services are exposed on the public listener, a builtin request received as the first message on a socket may cause the connection to be treated as authenticated for later requests on that socket. Users are recommended to upgrade to version 1.18.0, which fixes this issue, or apply this PR separately: https://github.com/apache/brpc/pull/3308 | Fri 30 Oct |
| CVE-2026-118333 | unscored | 0.00% | no CPE yet | Missing authorization in Video in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: High) | Fri 30 Oct |
| CVE-2026-118337 | unscored | 0.00% | no CPE yet | Improper access control in Forms in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: High) | Fri 30 Oct |
| CVE-2026-59229 | unscored | 0.00% | no CPE yet | The Legacy Pipe receiver protocol (handshake / sendPipeData) uses a hardcoded SUPER_USER (root) identity when executing data loading and deletion operations. A user with only SYSTEM-level privileges (such as USE_PIPE or MAINTAIN) who does NOT have WRITE_DATA or DELETE_DATA permissions on target databases can send specially crafted PipeData messages through the Legacy Pipe API, resulting in data loading/deletion operations executed as root — effectively bypassing IoTDB's permission model entirely. This issue affects Apache IoTDB: from 2.0.0 before 2.0.11. Users are recommended to upgrade to version 2.0.11, which fixes the issue. | Fri 30 Oct |
| CVE-2026-117028 | unscored | — | no CPE yet | Skuul School Management System through version 2.6.5 is vulnerable to incorrect access control in the ResultChecker::checkResult method. An authenticated student can manipulate the studentId parameter to retrieve another student's examination results, including examination marks, without authorization. | Fri 30 Oct |
300 of 11099 · Next · Previous
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.