Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-14336 | 8.2 high | 0.00% | no CPE yet | PIA's OIDC issuer allowlist for Jenkins tokens uses a bare string-prefix check (issuer.startswith(' https://ci.eclipse.org ') in is_issuer_known, pia/models.py:139) instead of validating the issuer as a properly host-bounded URL. An attacker can craft an issuer such as https://[email protected] (userinfo trick) or https://ci.eclipse.org.evil.host (suffix trick) that satisfies the prefix check while pointing the OIDC discovery and JWKS fetches at a server the attacker controls. An unauthenticated caller of POST /v1/upload/sbom can use this to force PIA to make outbound HTTP(S) requests to an arbitrary attacker-chosen host, and to have oidc.verify_token accept a JWT signed with the attacker's own key. | Sun 25 Oct |
| CVE-2026-15075 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), DefaultRedirectHandler (vertx-core) propagates all request headers as-is across cross-origin HTTP 30x redirects. Only Content-Length is stripped; no origin comparison (scheme, host, port) is performed before copying headers to the redirect target. As a result, credential headers, including Authorization, Cookie, Proxy-Authorization, and arbitrary custom headers such as X-API-Token, are forwarded to the redirect destination without the caller's knowledge. An attacker who can cause a Vert.x HttpClient to issue a request that is redirected to an attacker-controlled host (for example, by supplying a URL to a webhook dispatcher, image proxy, or microservice URL fetcher) can capture bearer tokens, basic-auth credentials, session cookies, and API keys attached to the original request. | Sat 24 Oct |
| CVE-2026-15076 | 8.2 high | 0.00% | eclipse, vert.x | In versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), the WebClientSession component of Eclipse Vert.x Web Client does not validate that the Domain attribute of a Set-Cookie response header matches the originating server's domain, in violation of RFC 6265 section 5.3. An attacker who controls any server that the victim application contacts can inject a cookie scoped to an arbitrary third-party domain; because the session store performs no cross-domain ownership check, it stores and later transmits that cookie to the targeted domain. When the victim application subsequently sends a request to the targeted domain using the same WebClientSession, it presents the attacker-injected cookie, causing the receiving service to process the request under the attacker's account. Sensitive data included in the victim application's requests, such as payment amounts, card details, or other API payloads, may then be accessible to the attacker through their own account on that service. | Sat 24 Oct |
| CVE-2026-102465 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a length declared by the server without enforcing an upper bound. A malicious or compromised Redis server, or an attacker in a man-in-the-middle position, can send a crafted RESP response declaring an extremely large array, push, or attribute length, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Vert.x event loop thread, denying service to all connections and verticles sharing that loop. The impacted component is io.vertx:vertx-mysql-client. | 20 Oct |
| CVE-2026-102462 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mssql-client. | 20 Oct |
| CVE-2026-102463 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError. The impacted component is io.vertx:vertx-pg-client. | 20 Oct |
| CVE-2026-102464 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention. A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination. The impacted component is io.vertx:vertx-mqtt. | 20 Oct |
| CVE-2026-102466 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application. The impacted component is io.vertx:vertx-mysql-client. | 20 Oct |
| CVE-2026-103223 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-pg-client. | 20 Oct |
| CVE-2026-103224 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mysql-client. | 20 Oct |
| CVE-2026-76184 | 8.2 high | 0.00% | no CPE yet | In Eclipse Jetty, HttpClient may receive a redirect of the form: ``` /secure/../evil ``` If an attacker is able to control the redirects, then HttpClient matches authentication credentials against `/secure` rather than normalizing the path to `/evil`, and will therefore follow the redirect sending the `Authorization` header for `/secure` to `/evil`. This also mean that the attacker must have an evil application deployed on the same domain as the target. | 15 Oct |
| CVE-2026-47873 | 8.0 high | 0.00% | broadcom, spring_tools | The Boot Dashboard Docker integration in Spring Tools publishes container control ports on all of the host's network interfaces (0.0.0.0) rather than restricting them to loopback. Affected Spring Products and Versions: Spring Tools for Eclipse: 5.2.0 and earlier | Fri 23 Oct |
| CVE-2026-11576 | 7.5 high | 0.00% | eclipse, threadx_netx_duo | The security fix for CVE-2025-0728 in eclipse-threadx NetX Duo refactors error handling in the HTTP server PUT process to use a shared cleanup label, but this unified cleanup path unconditionally calls fx_file_close() even when the file was never successfully opened. Multiple error branches jump to the shared cleanup label before any file open operation has occurred, causing fx_file_close() to operate on an uninitialized file handle, leading to undefined behavior, double-close issues, or memory corruption. | Mon 26 Oct |
| CVE-2026-9563 | 7.5 high | 0.00% | no CPE yet | In Eclipse Parsson published Maven Central artifacts before version 1.1.8, the JSON parser did not enforce a default maximum on the number of characters consumed while parsing a single JSON document. Applications that parse attacker- controlled JSON can be forced to consume excessive CPU and memory by processing very large documents, including large arrays, objects, strings, numbers, whitespace, or nested structures, resulting in a denial of service. Eclipse Parsson 1.1.8 introduces a configurable maximum parsing limit with a default limit of 15 million parser-consumed characters. | Sun 25 Oct |
| CVE-2026-113619 | 7.5 high | 0.00% | no CPE yet | In Eclipse ioFog Controller versions 3.8.0 through 3.9.1, POST, PUT, and PATCH bodies on routes that enable template substitution are rendered by an uncapped Liquid engine before authentication and RBAC. The bearer check does not reject a missing or invalid token, and the auth rate limit applies only to user login routes. A small JSON body can stall or abort the Controller process. The anonymous caller does not receive the rendered result; the impact is availability of the control plane, including the agent API and in-process WebSocket relays on that process. | 20 Oct |
| CVE-2026-93649 | 7.5 high | 0.00% | no CPE yet | In the Eclipse Adoptium website (adoptium.net), in every deployment built from commit 0b24ea1 (2025-06-18) up to the fix in commit cbb53cf (2026-09-24), the post-download page /[locale]/download takes a download URL from the "link" query parameter and automatically navigates to it with a meta http-equiv="refresh". The URL is checked against a list of trusted prefixes using String.startsWith() on the raw string, while the browser applies RFC 3986 dot-segment normalisation before navigating, so a value such as https://github.com/adoptium/temurin/../../attacker/malware/releases/download/v1/jdk.exe passes the check but resolves to an attacker-controlled repository. A victim who follows a crafted adoptium.net link is shown the genuine "Thank you for downloading Eclipse Temurin" page while their browser downloads a binary of the attacker's choosing | 16 Oct |
| CVE-2025-55080 | 7.2 high | 0.00% | eclipse, threadx | In Eclipse ThreadX before 6.4.3, when memory protection is enabled, syscall parameters verification wasn't enough, allowing an attacker to obtain an arbitrary memory read/write. | 8 Oct |
| CVE-2026-107503 | 7.1 high | 0.00% | no CPE yet | In Eclipse Ditto versions 3.6.0 to 3.8.13 and 3.9.0 to 3.9.7, the Ditto Explorer UI loads its complete environment configuration, including the Ditto API URI and the OpenID Connect (OIDC) provider settings, from an arbitrary cross-origin URL supplied in the environmentsURL query parameter. It adopts this configuration without user confirmation and persists it in the browser's localStorage. A crafted link can therefore set an attacker-controlled OIDC authority with autoSso enabled. The UI then automatically starts a login at the genuine identity provider but exchanges the returned authorization code together with its PKCE code_verifier at an attacker-controlled token endpoint. This lets the attacker redeem the code for the victim's access and refresh tokens. Alternatively, an attacker-controlled api_uri causes the UI to send the victim's bearer token or Basic credentials to the attacker. Because the configuration is persisted, later visits to the UI without the crafted link repeat the token theft. In versions 3.9.0 to 3.9.7, the Swagger UI OIDC integration of the Helm chart and the Docker Compose deployment is affected in the same way, but requires the user to start the login. The issue is fixed in 3.8.14 and 3.9.8. | 15 Oct |
| CVE-2026-6860 | 6.9 medium | 0.00% | eclipse, vert.x | A TCP client can perform a TLS handshake and present the server name extension with a server name that is accepted by a server wildcard name, e.g. if the server is configured with a certificate accepting *.example.com, any XYZ.example.com where xyz is a valid name can be used. | Mon 26 Oct |
| CVE-2026-9267 | 6.9 medium | 0.00% | no CPE yet | Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices. | Sun 25 Oct |
| CVE-2026-10051 | 6.9 medium | 0.00% | eclipse, jetty | In Eclipse Jetty, a first HTTP/1.1 request with trailers causes the server to retain the trailers in subsequent requests performed over the same connection. Subsequent request that do not have trailers report the trailers of the first request. Subsequent request that do have trailers report the union of trailers of the first request and the current request. | Sat 24 Oct |
| CVE-2026-63248 | 6.9 medium | 0.00% | eclipse, milo | In Eclipse Milo versions 0.6.0 through 1.1.4, OPC UA server diagnostics nodes do not enforce access authorization. An anonymous client can enable diagnostics over a None/None endpoint without a certificate; with a trusted client application certificate over SignAndEncrypt, it can read security diagnostics for other active sessions, exposing usernames, login history, authentication mechanisms, security modes and policies, and public client certificates. | Fri 23 Oct |
| CVE-2026-102471 | 6.9 medium | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the vertx-mail-client does not sanitize CR (\r) or LF (\n) characters in user-supplied email header names and values before writing them into the SMTP DATA section. A CR/LF sequence embedded in a name or value passed to MailMessage.addHeader(), MailMessage.setHeaders(), MailAttachment.addHeader(), or MailAttachment.setHeaders() is written verbatim to the wire, allowing an attacker to inject arbitrary headers (e.g. Bcc, Reply-To, Content-Type) or prepend body content to the outgoing message. The same weakness affects MIME part metadata set via MailAttachment.setContentType(), setDisposition(), setDescription(), and setContentId(), which are written directly into MIME part headers without validation. A secondary weakness in Utils.mustEncode(char) additionally allows a bare LF in a From display-name to bypass Q-encoding and reach the wire unchanged. An unauthenticated attacker who can control any header name, header value, or attachment metadata field passed to the mail client (for example via a web form or API that feeds into MailMessage) can exploit this to redirect email copies, spoof headers, or tamper with message structure. The impacted component is io.vertx:vertx-mail-client. | 20 Oct |
| CVE-2026-76182 | 6.9 medium | 0.00% | no CPE yet | In Eclipse Jetty, `TryPathsHandler` and `TryFilesFilter` can be configured to forward requests to template URIs such as `index?p=$path`, where `$path` is the request path in context. However, URI paths may contain characters that are reserved in URI queries so that a path of `/s&a=1` when applied to the template becomes `index?p=/s&a=1`, which is interpreted as 2 query parameters: `p=/s` and `a=1`, rather than just one query parameter `p` whose value is `/s&a=1`. | 15 Oct |
| CVE-2026-18659 | 6.9 medium | 0.00% | no CPE yet | In Eclipse Jetty, across various versions of `jetty-security`, and `jetty-eeN-security`, and `jetty-eeN-servlet`, the Jakarta Spec constraints defined as `http-method-omission` can be bypassed by using substrings of the defined HTTP Methods. | 15 Oct |
| CVE-2026-18662 | 6.9 medium | 0.00% | no CPE yet | In Eclipse Jetty, across various versions of `jetty-security`, and `jetty-eeN-security`, two or more security constraints with the same http-method-omission set, and no url-patterns, are not combined properly per Jakarta Servlet Spec. Resulting in later http-method-omission sets overriding previous constraints with the same http-method-omission set. | 15 Oct |
| CVE-2025-14549 | 6.9 medium | 0.00% | eclipse, omr | In the Eclipse OMR compiler component, since release 0.7.0, an optimization enabled for Eclipse OpenJ9 consumers of OMR on Z processors incorrectly handles NUL (0x00) characters during the Latin-compatible charset (UTF-8, ISO8859-1, ASCII, etc) to IBM-1047/037 translation sequence. This can cause the output byte array to be truncated, discarding the first NUL byte and all subsequent characters, and thereby exposing a possible buffer over-read problem. This issue is fixed in Eclipse OMR version 0.8.0. | 14 Oct |
| CVE-2025-55092 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In Eclipse Foundation NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_option_process() when processing an IPv4 packet with the timestamp option. | 9 Oct |
| CVE-2025-55093 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() when handling unicast DHCP messages that could cause corruption of 4 bytes of memory. | 9 Oct |
| CVE-2025-55094 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_icmpv6_validate_options() when handling a packet with ICMP6 options. | 9 Oct |
| CVE-2025-55081 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In Eclipse Foundation NextX Duo before 6.4.4, a module of ThreadX, the _nx_secure_tls_process_clienthello() function was missing length verification of certain SSL/TLS client hello message: the ciphersuite length and compression method length. In case of an attacker-crafted message with values outside of the expected range, it could cause an out-of-bound read. | 8 Oct |
| CVE-2025-55082 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was a potential out of bound read in _nx_secure_tls_process_clienthello() because of a missing validation of PSK length provided in the user message. | 8 Oct |
| CVE-2025-55083 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check resulting it out by two out of bound read. | 8 Oct |
| CVE-2025-55084 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo version before 6.4.4, the component of Eclipse Foundation ThreadX, there was an incorrect bound check in_nx_secure_tls_proc_clienthello_supported_versions_extension() in the extension version field. | 8 Oct |
| CVE-2025-55090 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ipv4_packet_receive() function when received an Ethernet frame with less than 4 bytes of IP packet. | 8 Oct |
| CVE-2025-55091 | 6.9 medium | 0.00% | eclipse, threadx_netx_duo | In NetX Duo before 6.4.4, the networking support module for Eclipse Foundation ThreadX, there was a potential out of bound read issue in _nx_ip_packet_receive() function when received an Ethernet with type set as IP but no IP data. | 8 Oct |
| CVE-2026-97400 | 6.8 medium | 0.00% | no CPE yet | In Eclipse OpenJ9 versions up to 0.63, opening a supplied diagnostic dump bundle with the jdmpview tool, or equivalent DTFJ code, may cause the analyst's machine to read an arbitrary local file named inside the bundle and send its contents to an arbitrary remote host. | 20 Oct |
| CVE-2026-22551 | 6.7 medium | 0.00% | eclipse, theia | In Eclipse Theia versions prior to 1.71.0, the AI chat rendered Markdown image tags from AI responses, triggering HTTP requests to arbitrary external URLs without restriction. Combined with prompt injection in a malicious workspace, an attacker could induce the AI agent to construct image URLs encoding sensitive information from the workspace or conversation context, exfiltrating it to attacker-controlled servers. The workspace trust enforcement introduced in v1.71.0 mitigates the documented attack chain by disabling AI features in untrusted workspaces. | Mon 26 Oct |
| CVE-2026-13699 | 6.5 medium | 0.00% | eclipse, kuksa | In Eclipse KUKSA Databroker version 0.6.1, the kuksa.val.v2.VAL/PublishValue gRPC handler fails to validate the existence of the optional data_point field in PublishValueRequest. When a request contains a valid signal_id but omits data_point, the server directly calls unwrap() on request.data_point, triggering a panic in the Tokio worker thread. This issue can be triggered by any client holding a valid JWT token. Unauthenticated or invalid-token requests are rejected and do not reach the vulnerable path. The panic causes the individual gRPC call to be cancelled but does not terminate the Databroker process, which remains available for subsequent requests. | Sat 24 Oct |
| CVE-2026-12606 | 6.3 medium | 0.00% | eclipse, grizzly | Eclipse Grizzly in versions before 5.0.2, cannot properly parse the trailer section in malformed trailer header's line, which can be leveraged to perform HTTP request smuggling. Grizzly 5.0.1 supports system properties that enable the behavior that fixes the vulnerability - set org.glassfish.grizzly.http.STRICT_HEADER_NAME_VALIDATION_RFC_9110 and org.glassfish.grizzly.http.STRICT_HEADER_VALUE_VALIDATION_RFC_9110 system properties to "true". | Sat 24 Oct |
| CVE-2025-10543 | 6.3 medium | 0.00% | eclipse, paho_mqtt | In Eclipse Paho Go MQTT v3.1 library (paho.mqtt.golang) versions <=1.5.0 UTF-8 encoded strings, passed into the library, may be incorrectly encoded if their length exceeds 65535 bytes. This may lead to unexpected content in packets sent to the server (for example, part of an MQTT topic may leak into the message body in a PUBLISH packet). The issue arises because the length of the data passed in was converted from an int64/int32 (depending upon CPU) to an int16 without checks for overflows. The int16 length was then written, followed by the data (e.g. topic). This meant that when the data (e.g. topic) was over 65535 bytes then the amount of data written exceeds what the length field indicates. This could lead to a corrupt packet, or mean that the excess data leaks into another field (e.g. topic leaks into message body). | 18 Oct |
| CVE-2025-55087 | 6.3 medium | 0.00% | eclipse, threadx_netx_duo | In NextX Duo's snmp addon versions before 6.4.4, a part of the Eclipse Foundation ThreadX, an attacker could cause an out-of-bound read by a crafted SNMPv3 security parameters. | 9 Oct |
| CVE-2025-55086 | 6.3 medium | 0.00% | eclipse, threadx_netx_duo | In NetXDuo version before 6.4.4, a networking support module for Eclipse Foundation ThreadX, in the DHCPV6 client there was an unchecked index extracting the server DUID from the server reply. With a crafted packet, an attacker could cause an out of memory read. | 8 Oct |
| CVE-2026-16439 | 5.8 medium | 0.00% | eclipse, openj9 | In Eclipse OpenJ9 versions up to 0.60, using -Xtrace to trace method arguments can lead to buffer underflow. | Sat 24 Oct |
| CVE-2026-14574 | 5.7 medium | 0.00% | eclipse, theia | In Eclipse Theia versions 0.7.0 and up until including 1.73.1, the `PreferenceUtils.merge` function in `@theia/core` recursively merges preference values without rejecting prototype-related keys (`__proto__`, `constructor`, `prototype`). Because this function is invoked by `PreferenceServiceImpl.doResolve` for every preference resolution across scopes (default, user, workspace, folder), a crafted preference value in a workspace settings file (`.theia/settings.json` or `.vscode/settings.json`) can pollute `Object.prototype` when the user opens the workspace, potentially altering application logic across the Theia process. | Fri 23 Oct |
| CVE-2026-16440 | 5.7 medium | 0.00% | no CPE yet | In Eclipse OpenJ9 versions up to 0.60, a crafted .class file with deeply nested annotations causes a segmentation fault. | 22 Oct |
| CVE-2025-55078 | 5.7 medium | 0.00% | eclipse, threadx | In Eclipse ThreadX before version 6.4.3, an attacker can cause a denial of service (crash) by providing a pointer to a reserved or unmapped memory region. Vulnerable system calls had a check of pointers, but that check wasn't verifying whether the pointer is outside the module memory region. | 8 Oct |
| CVE-2025-55079 | 5.7 medium | 0.00% | eclipse, threadx | In Eclipse ThreadX before version 6.4.3, the thread module has a setting of maximum priority. In some cases the check of that maximum priority wasn't performed, allowing, as a result, to obtain a thread with higher priority than expected and causing a possible denial of service. | 8 Oct |
| CVE-2026-19864 | 5.6 medium | 0.00% | no CPE yet | Eclipse Jetty's `SessionAuthentication` retains authentication credentials in a serializable object. When the credentials contain a plaintext password and the authenticated session is persisted to a session data store, the password may consequently be written to persistent storage in plaintext. An attacker with sufficient privileges to read the persisted session data may obtain the plaintext passwords of authenticated users. | 15 Oct |
| CVE-2026-113644 | 5.5 medium | 0.00% | no CPE yet | In Eclipse ioFog iofogctl versions 1.0.0 through 3.7.0 and 3.8.0-rc.1 through 3.9.1, the provisioning key and CA certificate returned by the Controller API are concatenated into shell commands (`edgelet provision` and `edgelet config cert` on supported releases; `iofog-agent provision` and `iofog-agent cert` on older releases) that run over SSH on a remote agent host and via a local shell. A party who can change that API response can include shell metacharacters and cause the operator's CLI to run additional commands on the agent host when the operator deploys or attaches an agent. This is fixed in version 3.9.2. | Tue 27 Oct |
Download these 115 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.