Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2019-17531 | 9.8 critical | 5.0% | fasterxml, debian, jackson-databind, debian_linux, jboss_enterprise_application_platform | A Polymorphic Typing issue was discovered in FasterXML jackson-databind 2.0.0 through 2.9.10. When Default Typing is enabled (either globally or for a specific property) for an externally exposed JSON endpoint and the service has the apache-log4j-extra (version 1.2.x) jar in the classpath, and an attacker can provide a JNDI service to access, it is possible to make the service execute a malicious payload. | 8 Oct |
| CVE-2019-16335 | 9.8 critical | 5.0% | fasterxml, fedoraproject, jackson-databind, fedora, debian_linux | A Polymorphic Typing issue was discovered in FasterXML jackson-databind before 2.9.10. It is related to com.zaxxer.hikari.HikariDataSource. This is a different vulnerability than CVE-2019-14540. | 8 Oct |
| CVE-2026-111216 | 8.6 high | 5.0% | pfsense | Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with gateway edit privileges to execute commands as root by injecting shell metacharacters into an IPv6 link-local zone index. Attackers can set a gateway Monitor IP whose unvalidated zone carries a payload, which start_dpinger() passes unescaped to the dpinger shell command when monitoring is applied. | Mon 26 Oct |
| CVE-2020-36183 | 8.1 high | 5.0% | fasterxml, netapp, jackson-databind, cloud_backup, service_level_manager | FasterXML jackson-databind 2.x before 2.9.10.8 mishandles the interaction between serialization gadgets and typing, related to org.docx4j.org.apache.xalan.lib.sql.JNDIConnectionPool. | 8 Oct |
| CVE-2021-21409 | 5.9 medium | 5.0% | netty, debian, debian_linux, oncommand_api_services | Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty (io.netty:netty-codec-http2) before version 4.1.61.Final there is a vulnerability that enables request smuggling. The content-length header is not correctly validated if the request only uses a single Http2HeaderFrame with the endStream set to to true. This could lead to request smuggling if the request is proxied to a remote peer and translated to HTTP/1.1. This is a followup of GHSA-wm47-8v5p-wjpj/CVE-2021-21295 which did miss to fix this one case. This was fixed as part of 4.1.61.Final. | 8 Oct |
| CVE-2018-0735 | 5.9 medium | 5.0% | openssl, canonical, ubuntu_linux, debian_linux | The OpenSSL ECDSA signature algorithm has been shown to be vulnerable to a timing side channel attack. An attacker could use variations in the signing algorithm to recover the private key. Fixed in OpenSSL 1.1.0j (Affected 1.1.0-1.1.0i). Fixed in OpenSSL 1.1.1a (Affected 1.1.1). | 8 Oct |
| CVE-2020-36189 | 8.1 high | 4.0% | fasterxml, netapp, jackson-databind, cloud_backup, service_level_manager | FasterXML jackson-databind 2.x before 2.9.10.8 mishandles the interaction between serialization gadgets and typing, related to com.newrelic.agent.deps.ch.qos.logback.core.db.DriverManagerConnectionSource. | 8 Oct |
| CVE-2020-36187 | 8.1 high | 4.0% | fasterxml, netapp, jackson-databind, cloud_backup, service_level_manager | FasterXML jackson-databind 2.x before 2.9.10.8 mishandles the interaction between serialization gadgets and typing, related to org.apache.tomcat.dbcp.dbcp.datasources.SharedPoolDataSource. | 8 Oct |
| CVE-2020-36186 | 8.1 high | 4.0% | fasterxml, netapp, jackson-databind, cloud_backup, service_level_manager | FasterXML jackson-databind 2.x before 2.9.10.8 mishandles the interaction between serialization gadgets and typing, related to org.apache.tomcat.dbcp.dbcp.datasources.PerUserPoolDataSource. | 8 Oct |
| CVE-2020-36185 | 8.1 high | 4.0% | fasterxml, netapp, jackson-databind, cloud_backup, service_level_manager | FasterXML jackson-databind 2.x before 2.9.10.8 mishandles the interaction between serialization gadgets and typing, related to org.apache.tomcat.dbcp.dbcp2.datasources.SharedPoolDataSource. | 8 Oct |
| CVE-2026-41923 | 9.3 critical | 3.0% | no CPE yet | WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the internet.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the gateway POST parameter. Attackers can exploit unsanitized parameter concatenation in the set_add_routing function to inject shell commands that are executed via popen() with partial output reflected in the HTTP response. | Mon 26 Oct |
| CVE-2026-12486 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_IP_Addr command injection The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = ip_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address system(v4); return 1; } | 25 Oct |
| CVE-2026-12849 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Net_Mask command injection The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = netmask_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr system(v4); return 1; } | 25 Oct |
| CVE-2026-12850 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Gate_way command injection The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev) { char s[324]; // [sp+4h] [bp-144h] BYREF if ( !dev && !*this || !gw ) return 0; system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0"); system("/sbin/route del default "); if ( dev ) sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string else sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string system(s); sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string system(s); return 1; } | 25 Oct |
| CVE-2026-12851 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_DNS_Addr command injection The following function can take up to two addresses, performs no sanitization and then calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_DNS_Addr(CNetSetObj *this, char *dns1, char *dns2) { int result; // r0 char v5[80]; // [sp+0h] [bp-50h] BYREF if ( !dns1 ) result = 0; if ( dns1 ) { sprintf(v5, "/bin/echo nameserver %s > /etc/resolv.conf", dns1); // attacker controlled dns1 field system(v5); if ( dns2 ) { sprintf(v5, "/bin/echo nameserver %s >> /etc/resolv.conf", dns2); system(v5); } return 1; } return result; | 25 Oct |
| CVE-2018-1257 | 6.5 medium | 3.0% | vmware, redhat, spring_framework, openshift, agile_product_lifecycle_management | Spring Framework, versions 5.0.x prior to 5.0.6, versions 4.3.x prior to 4.3.17, and older unsupported versions allows applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a regular expression, denial of service attack. | 8 Oct |
| CVE-2026-40502 | 8.7 high | 2.0% | hkuds, openharness | OpenHarness prior to commit dd1d235 contains a command injection vulnerability that allows remote gateway users with chat access to invoke sensitive administrative commands by exploiting insufficient distinction between local-only and remote-safe commands in the gateway handler. Attackers can execute administrative commands such as /permissions full_auto through remote chat sessions to change permission modes of a running OpenHarness instance without operator authorization. | Mon 26 Oct |
| CVE-2026-108894 | 8.6 high | 2.0% | no CPE yet | A security flaw has been discovered in Linksys E1700 1.0.0.4.003. Impacted is the function addStaticRoute of the file /goform/addStaticRoute of the component Static Route Handler. Performing a manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | 14 Oct |
| CVE-2026-102116 | 7.2 high | 2.0% | accellion, kiteworks | -A weakness could have allowed an authenticated Kiteworks Email Protection Gateway administrator to write a file outside its intended location and cause the application to execute it, potentially resulting in remote code execution as the underlying service account. | 8 Oct |
| CVE-2026-102097 | 7.2 high | 2.0% | accellion, kiteworks | Kiteworks Email Protection Gateway before version 9.5.0 is vulnerable to Remote Code Execution. Kiteworks Email Protection Gateway allowed an authenticated administrator to import configuration whose contents were not sufficiently validated before being processed. A crafted submission could potentially allow arbitrary commands to be executed on the affected gateway. | 8 Oct |
| CVE-2026-102089 | 7.2 high | 2.0% | accellion, kiteworks | Kiteworks Email Protection Gateway before version 9.5.0 is vulnerable to a path traversal weakness in an administrative import function allowed an authenticated administrator to write files to arbitrary locations on the server. This could potentially be leveraged to execute arbitrary code on the underlying system. | 8 Oct |
| CVE-2026-12847 | 10.0 critical | 1.0% | no CPE yet | GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Gateway field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v7 = strlen(g_network_config->gateway); memcpy(&reply_buf[216], g_network_config->gateway, v7); | 25 Oct |
| CVE-2026-44181 | 10.0 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions 2.0.0rc2 and above, prior to 3.3.0, the environment variables (KERNEL_XXX) used during the rendering of the Kubernetes manifest are vulnerable to Server Side Template Injection (SSTI). By including Jinja2 template expressions it is possible to execution Python code and OS Commands in the Enterprise Gateway service. The code can use or steal the Kubernetes service account token, which can steal Kubernetes secrets and be used to fully compromise the Kubernetes cluster by scheduling a privileged pod or a pod with a hostPath volume mount. This issue has been fixed in version 3.3.0. | 24 Oct |
| CVE-2026-44182 | 10.0 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions prior to 3.3.0, the server interpolates untrusted environment variables (e.g., KERNEL_XXX) into Kubernetes manifests without YAML-aware escaping, enabling YAML injection attacks. Attackers can inject new fields, overwrite critical fields (e.g., duplicate securityContext keys, where the last one prevails), and inject document boundaries (--- for new documents, ... for end-of-document) to generate multiple resources, potentially creating arbitrary types, such as privileged pods. The Jinja2 template for the Kubernetes manifest contains several kernel_xxx variables, such as kernel_working_dir that are used when rendering the manifest and are all vectors for YAML injection. This issue has been fixed in version 3.3.0. | 24 Oct |
| CVE-2025-34218 | 10.0 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) expose internal Docker containers through the gw Docker instance. The gateway publishes a /meta endpoint which lists every micro‑service container together with version information. These containers are reachable directly over HTTP/HTTPS without any access‑control list (ACL), authentication or rate‑limiting. Consequently, any attacker on the LAN or the Internet can enumerate all internal services and their versions, interact with the exposed APIs of each microservice as an unauthenticated user, or issue malicious requests that may lead to information disclosure, privilege escalation within the container, or denial‑of‑service of the entire appliance. The root cause is the absence of authentication and network‑level restrictions on the API‑gateway’s proxy to internal Docker containers, effectively turning the internal service mesh into a public attack surface. This vulnerability has been identified by the vendor as: V-2024-030 — Exposed Internal Docker Instance (LAN). | 18 Oct |
| CVE-2026-57677 | 9.8 critical | 1.0% | no CPE yet | Unauthenticated PHP Object Injection in Novalnet Payment Gateway for WooCommerce <= 12.10.3 versions. | 25 Oct |
| CVE-2026-44180 | 9.8 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. Versions 2.0.0rc1 and above prior to 3.3.0 have a prohibited UID and GID feature that by default prevents launching kernels with UID or GID 0 (root), and this restriction can be bypassed using a specially crafted KERNEL_UID or KERNEL_GID value. This input validation vulnerability allows running Jupyter kernels as root, which can be dangerous as it allows more attack surface, and may lead to container escapes, compromising the worker node and all workloads running on it. Repeated exploitation can compromise all worker nodes, and thus the entire Kubernetes cluster. It is possible to specify volume mounts, so one vector for a container escape is to use a hostPath R/W volume mount, use this UID/GID bypass to run as root, and then gain code execution in the underlying worker node by creating a crontab entry in the mounted host file system. This issue has been fixed in version 3.0.0. | 24 Oct |
| CVE-2023-2186 | 9.8 critical | 1.0% | trianglemicroworks, scada_data_gateway | On Triangle MicroWorks' SCADA Data Gateway version <= v5.01.03, an unauthenticated attacker can send a specially crafted broadcast message including format string characters to the SCADA Data Gateway to perform unrestricted memory reads.An unauthenticated user can use this format string vulnerability to repeatedly crash the GTWWebMonitor.exe process to DoS the Web Monitor. Furthermore, an authenticated user can leverage this vulnerability to leak memory from the GTWWebMonitor.exe process. This could be leveraged in an exploit chain to gain code execution. | 23 Oct |
| CVE-2026-71289 | 9.8 critical | 1.0% | no CPE yet | The NASA-AMMOS Asynchronous Network Management System (ANMS) reference implementation's default docker-compose.yml publishes the amp-manager service's REST API directly to the host network interface (port 8089, e.g. ":8089/tcp") with cap_add: NET_ADMIN, NET_RAW, SYS_NICE, bypassing the CAM (Configuration and Access Manager) gateway that is otherwise the system's sole authentication boundary. | 23 Oct |
| CVE-2025-64656 | 9.8 critical | 1.0% | microsoft, azure_application_gateway | Out-of-bounds read in Application Gateway allows an unauthorized attacker to elevate privileges over a network. | 18 Oct |
| CVE-2025-64657 | 9.8 critical | 1.0% | microsoft, azure_application_gateway | Stack-based buffer overflow in Azure Application Gateway allows an unauthorized attacker to elevate privileges over a network. | 18 Oct |
| CVE-2026-53709 | 9.8 critical | 1.0% | no CPE yet | MCP Context Forge is an MCP gateway and administrative platform. Prior to 1.0.2, mcpgateway/config.py and .env.example ship a known JWT_SECRET_KEY, while verify_jwt_token() accepts HS256 tokens signed with that key and get_current_user() creates a platform administrator when the token subject matches PLATFORM_ADMIN_EMAIL and REQUIRE_USER_IN_DB is false. A remote unauthenticated attacker can therefore mint accepted administrator tokens without a database account. While the vulnerable signing key remains configured and the platform-admin bootstrap remains enabled, forged access survives password rotation, account deletion, and session revocation, allowing administrative disclosure, modification, and service disruption. This issue is fixed in version 1.0.2. | 16 Oct |
| CVE-2026-15762 | 9.8 critical | 1.0% | ibm, datapower_gateway | IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to execute arbitrary code due to an out-of-bounds write. | 15 Oct |
| CVE-2026-6074 | 9.3 critical | 1.0% | no CPE yet | Intrado 911 Emergency Gateway (EGW) 5.x, 6.x, and 7.x contain a path traversal vulnerability in the download_debuglog_file.php endpoint used for Debug Logs downloads. An unauthenticated attacker can manipulate the name parameter to read arbitrary files outside the intended directory. | Mon 26 Oct |
| CVE-2026-44128 | 9.3 critical | 1.0% | no CPE yet | SEPPmail Secure Email Gateway before version 15.0.2.1 allows unauthenticated remote code execution in the new GINA UI because an endpoint passes attacker-controlled input from a parameter to Perl's eval. | Mon 26 Oct |
| CVE-2026-41939 | 9.3 critical | 1.0% | no CPE yet | Care Everywhere Gateway 14.3.10 contains a hard-coded credentials vulnerability in the bundled WildFly 8.2.0.Final management interface that allows unauthenticated remote attackers to gain administrative access by using default credentials identical across all installations. Attackers can authenticate to the exposed WildFly management console on port 20990 and deploy a malicious Web Application Archive file through the Deployments interface to achieve remote code execution as the Windows machine account. Version 14.x.x was declared end-of-life (EOL) in 2017 and future releases have addressed the vulnerable finding. | 24 Oct |
| CVE-2026-111998 | 9.3 critical | 1.0% | no CPE yet | Vanus 0.8.0 through 0.9.0 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain cluster-admin access by using the hardcoded admin token. Attackers can send the fixed Bearer token to the gateway gRPC proxy port to manage namespaces, eventbuses, users, tokens, and role bindings, and read or publish events. | 19 Oct |
| CVE-2025-34199 | 9.3 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.1049 and Application versions prior to 20.0.2786 (VA and SaaS deployments) contain insecure defaults and code patterns that disable TLS/SSL certificate verification for communications to printers and internal microservices. In multiple places, the application sets libcurl/PHP transport options such that CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER are effectively disabled, and environment variables (for example API_*_VERIFYSSL=false) are used to turn off verification for gateway and microservice endpoints. As a result, the client accepts TLS connections without validating server certificates (and, in some cases, uses clear-text HTTP), permitting on-path attackers to perform man-in-the-middle (MitM) attacks. An attacker able to intercept network traffic between the product and printers or microservices can eavesdrop on and modify sensitive data (including print jobs, configuration, and authentication tokens), inject malicious payloads, or disrupt service. This vulnerability has been identified by the vendor as: V-2024-024 — Insecure Communication to Printers & Microservices. | 18 Oct |
| CVE-2025-13510 | 9.3 critical | 1.0% | no CPE yet | The Iskra iHUB and iHUB Lite smart metering gateway exposes its web management interface without requiring authentication, allowing unauthenticated users to access and modify critical device settings. | 18 Oct |
| CVE-2026-27843 | 9.2 critical | 1.0% | senselive, x3500_firmware | A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authentication or server-side validation. By applying unsupported or disruptive values to recovery mechanisms and network settings, an attacker can induce a persistent lockout state. Because the device lacks a physical reset button, recovery requires specialized technical access via the console to perform a factory reset, resulting in a total denial-of-service for the gateway and its connected RS-485 downstream systems. | Mon 26 Oct |
| CVE-2025-58083 | 9.2 critical | 1.0% | no CPE yet | General Industrial Controls Lynx+ Gateway is missing critical authentication in the embedded web server which could allow an attacker to remotely reset the device. | 18 Oct |
| CVE-2025-13590 | 9.1 critical | 1.0% | wso2, wso2 api manager, wso2 api control plane, wso2 universal gateway | A malicious actor with administrative privileges can upload an arbitrary file to a user-controlled location within the deployment via a system REST API. Successful uploads may lead to remote code execution. By leveraging the vulnerability, a malicious actor may perform Remote Code Execution by uploading a specially crafted payload. | Wed 28 Oct |
| CVE-2026-71479 | 9.1 critical | 1.0% | no CPE yet | New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.18, user-controlled image n, video seconds and duration, max_tokens, max_completion_tokens, maxOutputTokens, audio duration, and billing-expression quantities can overflow conversions in common/quota_math.go and related settlement paths, allowing a low-privileged account with positive balance or an active subscription to turn a negative charge into account credit and potentially drain upstream funds. This issue is fixed in version 1.0.0-rc.18. | 24 Oct |
| CVE-2026-115547 | 9.1 critical | 1.0% | no CPE yet | An input validation issue in the Okta Access Gateway (OAG) Admin Console allows the processing of specially formatted configuration values. An authenticated administrator can leverage this to execute system commands within the context of the OAG service account. | 23 Oct |
| CVE-2026-66786 | 9.1 critical | 1.0% | no CPE yet | A flaw was found in submariner. In cert-auth mode, the connection configuration is built using free-form strings from the Custom Resource Definition (CRD) without proper validation. A malicious cluster can exploit this by publishing a CableName that includes newlines and ipsec.conf directives. This allows an attacker to inject arbitrary configuration parameters or execute commands through leftupdown hooks, leading to remote code execution as root on the gateway node. | 19 Oct |
| CVE-2026-102106 | 9.1 critical | 1.0% | accellion, kiteworks | Improper authentication in a Kiteworks Email Protection Gateway administrative service. An administrative service in Kiteworks Email Protection Gateway did not consistently enforce administrator authentication, so the required password check could be bypassed. An attacker who referenced a valid administrator account could potentially create, modify, or delete internal users and managed domains and change their security-feature configuration without authenticating; deleting a managed domain also removes its user accounts and could lock administrators out of the gateway. | 8 Oct |
| CVE-2026-102105 | 9.1 critical | 1.0% | accellion, kiteworks | Kiteworks Email Protection Gateway before version 9.5.0 is vulnerable to Server-Side Request Forgery (SSRF). A server-side request forgery (SSRF) weakness in Kiteworks Email Protection Gateway could allow a remote, unauthenticated attacker to induce the gateway to issue crafted requests to internal or otherwise unintended network destinations. The requests are triggered while the gateway renders message content that references external resources. Depending on the services reachable from the gateway, this could disclose sensitive internal information or trigger unintended actions on internal systems. | 8 Oct |
| CVE-2026-102104 | 9.1 critical | 1.0% | accellion, kiteworks | Kiteworks Email Protection Gateway before version 9.5.0 is vulnerable to Server-Side Request Forgery (SSRF). A server-side request forgery (SSRF) weakness in Kiteworks Email Protection Gateway could allow a remote, unauthenticated attacker to induce the gateway to issue crafted requests to internal or otherwise unintended network destinations. The requests are triggered while the gateway performs an online certificate status check for an inbound message. Depending on the services reachable from the gateway, this could disclose sensitive internal information or disrupt gateway operation. | 8 Oct |
| CVE-2026-102103 | 9.1 critical | 1.0% | accellion, kiteworks | Kiteworks Email Protection Gateway before version 9.5.0 is vulnerable to Server-Side Request Forgery (SSRF). A server-side request forgery (SSRF) weakness in Kiteworks Email Protection Gateway could allow a remote, unauthenticated attacker to induce the gateway to issue crafted requests to internal or otherwise unintended network destinations. The requests are triggered while the gateway retrieves a certificate revocation list in an inbound message. Depending on the services reachable from the gateway, this could disclose sensitive internal information or disrupt gateway operation. | 8 Oct |
| CVE-2026-102102 | 9.1 critical | 1.0% | accellion, kiteworks | Kiteworks Email Protection Gateway before version 9.5.0 is vulnerable to Server-Side Request Forgery (SSRF). A server-side request forgery (SSRF) weakness in Kiteworks Email Protection Gateway could allow a remote, unauthenticated attacker to induce the gateway to issue crafted requests to internal or otherwise unintended network destinations. The requests are triggered while the gateway retrieves an issuer certificate in an inbound message. Depending on the services reachable from the gateway, this could disclose sensitive internal information or disrupt gateway operation. | 8 Oct |
Download these 575 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.