Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-31711 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | 15 Oct |
| CVE-2026-103423 | 7.5 high | 1.0% | no CPE yet | The Booking Package plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.7.29 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to retrieve personally identifiable information for every booked customer stored in the booking_package_booked_customers table, including names, email addresses, phone numbers, physical addresses, and cancellation tokens. The nonce nominally protecting the endpoint is a public CSRF token emitted in the localized booking_package JavaScript object on any page rendering the [booking_package] shortcode or widget, making it trivially harvestable by unauthenticated visitors and providing no effective authentication barrier. | 14 Oct |
| CVE-2026-104749 | 7.5 high | 1.0% | no CPE yet | The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. | 14 Oct |
| CVE-2026-75347 | 7.5 high | 1.0% | no CPE yet | EIPStackGroup OpENer v2.3 and master up to commit 76b95cf contain an expired pointer dereference vulnerability in the EtherNet/IP Common Packet Format (CPF) handling logic. This allows a remote attacker to cause a denial of service. | 13 Oct |
| CVE-2026-93746 | 7.5 high | 1.0% | no CPE yet | The WebToffee WooCommerce PDF Invoices, Packing Slips, Delivery Notes & Shipping Labels plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 5.0.2 via the 'email' parameter of the guest print_document_from_the_mail_link handler dispatched from print_window() on init. This is due to the handler authorizing access to an order's printable documents when the attacker-supplied (base64-encoded) 'email' equals the order's billing email — a non-secret identifier — instead of requiring the WooCommerce order_key. This makes it possible for unauthenticated attackers, when the site is configured to allow guest access to documents ('wt_pklist_print_button_access_for' != 'logged_in'), to retrieve any other customer's invoice, packing slip, delivery note, dispatch label or shipping label — including customer name, billing/shipping address, phone number, purchased products, prices, taxes and invoice metadata — by knowing the target order ID and the associated billing email address. | 13 Oct |
| CVE-2026-2996 | 7.5 high | 1.0% | no CPE yet | The Advanced Product Fields (Product Addons) for WooCommerce plugin for WordPress is vulnerable to Improper Input Validation in all versions up to, and including, 1.6.21. This is due to a logic flaw in the 'validate_cart_data' function. This makes it possible for unauthenticated attackers to bypass required paid addons and complete purchases at the base product price only, effectively stealing products by paying a fraction of the intended total. The vulnerability was partially patched in version 1.6.19. | 12 Oct |
| CVE-2025-9212 | 7.5 high | 1.0% | no CPE yet | The WP Dispatcher plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the wp_dispatcher_process_upload() function in all versions up to, and including, 1.2.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. The directory does have an .htaccess file which limits the ability to achieve remote code execution. | 12 Oct |
| CVE-2026-75348 | 7.5 high | 1.0% | no CPE yet | An out-of-bounds read vulnerability exists in EIPStackGroup OpENer v2.3 and master up to commit 76b95cf in the EtherNet/IP TCP SendRRData Common Packet Format parser. The issue occurs in CreateCommonPacketFormatStructure() when it parses recognized optional socket address information items of type 0x8000 or 0x8001 without first validating that the remaining CPF buffer contains the complete fixed sockaddr structure. This allows a remote attacker to cause a denial of service. | 9 Oct |
| CVE-2025-11722 | 7.5 high | 1.0% | no CPE yet | The Woocommerce Category and Products Accordion Panel plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.0 via the 'categoryaccordionpanel' shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | 8 Oct |
| CVE-2026-6168 | 7.4 high | 1.0% | no CPE yet | A flaw has been found in TOTOLINK A7000R up to 9.1.0u.6115. The affected element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid5g causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. | Mon 26 Oct |
| CVE-2026-7418 | 7.4 high | 1.0% | no CPE yet | A vulnerability was determined in UTT HiPER 1250GW up to 3.2.7-210907-180535. This vulnerability affects the function strcpy of the file route/goform/NTP. Executing a manipulation of the argument Profile can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. | Mon 26 Oct |
| CVE-2026-7675 | 7.4 high | 1.0% | no CPE yet | A vulnerability has been found in Shenzhen Libituo Technology LBT-T300-HW1 up to 1.2.8. Impacted is the function start_lan of the file /apply.cgi. The manipulation of the argument Channel/ApCliSsid leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2026-6186 | 7.4 high | 1.0% | no CPE yet | A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This vulnerability affects the function strcpy of the file /goform/formNatStaticMap. The manipulation of the argument NatBind leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. | Sun 25 Oct |
| CVE-2026-7419 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file route/goform/formTaskEdit_ap. The manipulation of the argument Profile leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. | Sun 25 Oct |
| CVE-2026-14721 | 7.4 high | 1.0% | no CPE yet | A vulnerability has been found in UTT HiPER 1250GW up to 3.2.7-210907-180535. This affects an unknown function of the file /goform/ConfigWirelessBase_5g of the component Web Endpoint. The manipulation of the argument ssid leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. | Sun 25 Oct |
| CVE-2026-15480 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in Trendnet TEW-635BRM up to 1.00.03. This affects the function start_httpd of the file /sbin/rc of the component Web Service. Such manipulation of the argument device_name leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor explains: "We are unable to confirm if the vulnerability exists. This item has been EOL since 2011. We will make an official announcement of possible vulnerabilities, and recommend users to switch devices." This vulnerability only affects products that are no longer supported by the maintainer. | Sun 25 Oct |
| CVE-2026-15544 | 7.4 high | 1.0% | no CPE yet | A vulnerability was determined in Shibby Tomato up to 1.28.0000. Affected is the function getupsvar of the file www/apcupsd/tomatodata.cgi of the component apcupsd. This manipulation of the argument Field causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. This project is superseded by FreshTomato. | 24 Oct |
| CVE-2026-15545 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in Shibby Tomato up to 1.28.0000. Affected by this vulnerability is the function main of the file www/apcupsd/tomatodata.cgi of the component apcupsd. Such manipulation leads to out-of-bounds write. The attack may be launched remotely. The exploit is publicly available and might be used. This project is superseded by FreshTomato. | 24 Oct |
| CVE-2026-15548 | 7.4 high | 1.0% | no CPE yet | A security vulnerability has been detected in Shibby Tomato up to 1.28.0000. This vulnerability affects the function sub_407220 of the file /usr/sbin/httpd of the component DNS List Rendering. The manipulation leads to stack-based buffer overflow. The attack is possible to be carried out remotely. This project is superseded by FreshTomato. | 24 Oct |
| CVE-2026-18895 | 7.4 high | 1.0% | no CPE yet | A vulnerability was found in UTT HiPER 1250GW up to 3.2.7-210907-180535. Impacted is the function strcpy of the file /goform/APSecurity_5g. Performing a manipulation of the argument cipher results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | 23 Oct |
| CVE-2026-18897 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in UTT HiPER 1250GW up to v3.2.7-210907-180535. The impacted element is the function strcpy of the file /goform/getOneApConfTempEntry. The manipulation of the argument tempName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | 23 Oct |
| CVE-2026-18898 | 7.4 high | 1.0% | no CPE yet | A security flaw has been discovered in UTT HiPER 1200GW up to v2.5.3-170306. This affects the function strcpy of the file /goform/ConfigAdvideo. The manipulation of the argument timestart results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | 23 Oct |
| CVE-2026-19341 | 7.4 high | 1.0% | no CPE yet | A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/pptpSrvGlobalConfig. Such manipulation of the argument EncryptionMode leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 23 Oct |
| CVE-2025-13258 | 7.4 high | 1.0% | tenda, ac20_firmware | A vulnerability was detected in Tenda AC20 up to 16.03.08.12. The impacted element is an unknown function of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. | 18 Oct |
| CVE-2025-14015 | 7.4 high | 1.0% | h3c, magic_b0_firmware | A weakness has been identified in H3C Magic B0 up to 100R002. This impacts the function EditWlanMacList of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. | 18 Oct |
| CVE-2025-14191 | 7.4 high | 1.0% | utt, 512w_firmware | A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 14 Oct |
| CVE-2025-14196 | 7.4 high | 1.0% | no CPE yet | A weakness has been identified in H3C Magic B1 up to 100R004. The affected element is the function sub_44de0 of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. | 14 Oct |
| CVE-2026-78170 | 7.4 high | 1.0% | no CPE yet | A flaw has been found in UTT HiPER 1200GW up to 2.5.3-170306. Affected is the function strcpy of the file /goform/formConfigFastDirectionW. Executing a manipulation of the argument ssid can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. | 12 Oct |
| CVE-2025-10815 | 7.4 high | 1.0% | tenda, ac20_firmware | A vulnerability was identified in Tenda AC20 up to 16.03.08.12. Affected by this issue is the function strcpy of the file /goform/SetPptpServerCfg of the component HTTP POST Request Handler. Such manipulation of the argument startIp leads to buffer overflow. The attack can be launched remotely. The exploit is publicly available and might be used. | 11 Oct |
| CVE-2025-10942 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in H3C Magic B3 up to 100R002. This affects the function AddMacList/EditMacList of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | 11 Oct |
| CVE-2025-11091 | 7.4 high | 1.0% | tenda, ac21_firmware | A security flaw has been discovered in Tenda AC21 up to 16.03.08.16. Affected by this vulnerability is the function sscanf of the file /goform/SetStaticRouteCfg. The manipulation of the argument list results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be exploited. | 9 Oct |
| CVE-2025-11305 | 7.4 high | 1.0% | utt, 840g_firmware | A vulnerability has been found in UTT HiPER 840G up to 3.1.1-190328. Affected by this issue is the function strcpy of the file /goform/formTaskEdit. The manipulation of the argument txtMin2 leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 9 Oct |
| CVE-2025-11323 | 7.4 high | 1.0% | utt, 1250gw_firmware | A vulnerability was determined in UTT 1250GW up to v2v3.2.2-200710. Affected is the function strcpy of the file /goform/formUserStatusRemark. This manipulation of the argument Username causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | 9 Oct |
| CVE-2025-11338 | 7.4 high | 1.0% | dlink, di-7100g_c1_firmware | A flaw has been found in D-Link DI-7100G C1 up to 20250928. This vulnerability affects the function sub_4C0990 of the file /webchat/login.cgi of the component jhttpd. Executing manipulation of the argument openid can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used. | 9 Oct |
| CVE-2025-11339 | 7.4 high | 1.0% | dlink, di-7100g_c1_firmware | A vulnerability has been found in D-Link DI-7100G C1 up to 20250928. This issue affects the function sub_4BD4F8 of the file /webchat/hi_block.asp of the component jhttpd. The manipulation of the argument popupId leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | 9 Oct |
| CVE-2025-11355 | 7.4 high | 1.0% | utt, 1250gw_firmware | A vulnerability has been found in UTT 1250GW up to v2v3.2.2-200710. Affected by this vulnerability is the function strcpy of the file /goform/aspChangeChannel. The manipulation of the argument pvid leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 8 Oct |
| CVE-2025-11356 | 7.4 high | 1.0% | tenda, ac23_firmware | A vulnerability was found in Tenda AC23 up to 16.03.07.52. Affected by this issue is the function sscanf of the file /goform/SetStaticRouteCfg. The manipulation of the argument list results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. | 8 Oct |
| CVE-2025-11385 | 7.4 high | 1.0% | tenda, ac20_firmware | A vulnerability has been found in Tenda AC20 up to 16.03.08.12. The affected element is the function sscanf of the file /goform/fast_setting_wifi_set. The manipulation of the argument timeZone leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | 8 Oct |
| CVE-2025-11444 | 7.4 high | 1.0% | totolink, n600r_firmware | A security vulnerability has been detected in TOTOLINK N600R up to 4.3.0cu.7866_B20220506. This impacts the function setWiFiBasicConfig of the file /cgi-bin/cstecgi.cgi of the component HTTP Request Handler. Such manipulation of the argument wepkey leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. | 8 Oct |
| CVE-2025-11651 | 7.4 high | 1.0% | utt, 518g_firmware | A vulnerability has been found in UTT 进取 518G up to V3v3.2.7-210919-161313. This vulnerability affects the function sub_4247AC of the file /goform/formRemoteControl. The manipulation of the argument Profile leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 8 Oct |
| CVE-2025-11652 | 7.4 high | 1.0% | utt, 518g_firmware | A vulnerability was found in UTT 进取 518G up to V3v3.2.7-210919-161313. This issue affects some unknown processing of the file /goform/formTaskEdit_ap. The manipulation of the argument txtMin2 results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | 8 Oct |
| CVE-2025-11653 | 7.4 high | 1.0% | utt, 2620g_firmware | A vulnerability was determined in UTT HiPER 2620G up to 3.1.4. Impacted is the function strcpy of the file /goform/fNTP. This manipulation of the argument NTPServerIP causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | 8 Oct |
| CVE-2026-7069 | 7.3 high | 1.0% | dlink, dir-825_firmware | A security flaw has been discovered in D-Link DIR-825 up to 3.00b32. This impacts the function AddPortMapping of the file upnpsoap.c of the component miniupnpd. Performing a manipulation of the argument NewPortMappingDescription results in buffer overflow. The attack needs to be approached within the local network. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer. | Mon 26 Oct |
| CVE-2025-12382 | 7.3 high | 1.0% | algosec, firewall_analyzer | Improper Limitation of a Pathname 'Path Traversal') vulnerability in Algosec Firewall Analyzer on Linux, 64 bit allows an authenticated user to upload files to a restricted directory leading to code injection. This issue affects Algosec Firewall Analyzer: A33.0 (up to build 320), A33.10 (up to build 210). | 18 Oct |
| CVE-2023-7104 | 7.3 high | 1.0% | sqlite, fedoraproject, fedora | A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999. | 14 Oct |
| CVE-2026-112365 | 7.2 high | 1.0% | wpdevteam, easy.jobs – ai powered job listing, job board, career page, recruitment & hiring solution | The easy.jobs – AI powered Job Listing, Job Board, Career Page, Recruitment & Hiring Solution plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'cover_letter' parameter in all versions up to, and including, 2.8.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful execution requires an administrator to open the affected candidate's Application tab and click the attacker-crafted link, at which point WHATWG URL parsing collapses the encoded scheme back to javascript: and executes the payload. | Fri 30 Oct |
| CVE-2026-5627 | 7.2 high | 1.0% | mintplexlabs, anythingllm | A path traversal vulnerability exists in mintplex-labs/anything-llm versions up to and including 1.9.1, within the `AgentFlows` component. The vulnerability arises from improper handling of user input in the `loadFlow` and `deleteFlow` methods in `server/utils/agentFlows/index.js`. Specifically, the combination of `path.join` and `normalizePath` allows attackers to bypass directory restrictions and access or delete arbitrary `.json` files on the server. This can lead to information disclosure, such as leaking sensitive configuration files containing API keys, or denial of service by deleting critical files like `package.json`. The issue is resolved in version 1.12.1. | Mon 26 Oct |
| CVE-2025-13145 | 7.2 high | 1.0% | no CPE yet | The WP Import – Ultimate CSV XML Importer for WordPress plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 7.33.1. This is due to deserialization of untrusted data supplied via CSV file imports in the import_single_post_as_csv function within SingleImportExport.php. This makes it possible for authenticated attackers, with administrator-level access or higher, to inject a PHP object. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. | 18 Oct |
| CVE-2025-13376 | 7.2 high | 1.0% | no CPE yet | The ProjectList plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in all versions up to, and including, 0.3.0. This makes it possible for authenticated attackers, with Editor-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2026-104764 | 7.2 high | 1.0% | no CPE yet | The Post Export Import with Media plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.17.1 via deserialization of untrusted input . This makes it possible for authenticated attackers, with administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. | 15 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.