Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-34291KEVexploit ×2 | 9.4 critical | 93.0% | langflow | Langflow versions up to and including 1.6.9 contain a chained vulnerability that enables account takeover and remote code execution. An overly permissive CORS configuration (allow_origins='*' with allow_credentials=True) combined with a refresh token cookie configured as SameSite=None allows a malicious webpage to perform cross-origin requests that include credentials and successfully call the refresh endpoint. An attacker-controlled origin can therefore obtain fresh access_token / refresh_token pairs for a victim session. Obtained tokens permit access to authenticated endpoints — including built-in code-execution functionality — allowing the attacker to execute arbitrary code and achieve full system compromise. | 15 Oct |
| CVE-2026-105134KEVexploit | 10.0 critical | 82.0% | ahsay, cloud_backup_suite | A flaw has been found in Ahsay AhsayCBS up to 9.15.2.69/10.3.4.44. This vulnerability affects unknown code of the file /rps/api/json/UpdateReceivers.do of the component Replication Receiver. Executing a manipulation of the argument random can lead to os command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 9.15.2.70 and 10.3.4.45 is able to resolve this issue. Upgrading the affected component is advised. The initial patch did not fix the security vulnerability properly. An update of the CVE entry to reflect this became necessary. | Mon 26 Oct |
| CVE-2026-105133KEVexploit | 6.9 medium | 79.0% | ahsay, cloud_backup_suite | A vulnerability was detected in Ahsay AhsayCBS up to 9.15.2.69/10.3.4.44. This affects the function checkSysPwd of the file com/ahsay/obs/api/ApiStructsAction.java of the component API. Performing a manipulation of the argument random results in improper authentication. It is possible to initiate the attack remotely. The exploit is now public and may be used. Upgrading to version 9.15.2.70 and 10.3.4.45 is able to mitigate this issue. It is recommended to upgrade the affected component. The initial patch did not fix the security vulnerability properly. An update of the CVE entry to reflect this became necessary. | Mon 26 Oct |
| CVE-2025-39682KEVexploit ×2 | 9.8 critical | 3.0% | linux, debian, linux_kernel, debian_linux, simatic_cn_4100_firmware | In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | 19 Oct |
| CVE-2023-48795exploit ×5 | 5.9 medium | 94.0% | openbsd, putty, openssh, filezilla_client | The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in [email protected] and (if CBC is used) the [email protected] MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust. | 15 Oct |
| CVE-2013-7285exploit ×2 | 9.8 critical | 84.0% | oracle, apache, endeca_information_discovery_studio, activemq, xstream | Xstream API versions up to 1.4.6 and version 1.4.10, if the security framework has not been initialized, may allow a remote attacker to run arbitrary shell commands by manipulating the processed input stream when unmarshaling XML or any supported format. e.g. JSON. | 8 Oct |
| CVE-2025-6389exploit ×3 | 9.8 critical | 76.0% | no CPE yet | The Sneeit Framework plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 8.3 via the sneeit_articles_pagination_callback() function. This is due to the function accepting user input and then passing that through call_user_func(). This makes it possible for unauthenticated attackers to execute code on the server which can be leveraged to inject backdoors or, for example, create new administrative user accounts. | 18 Oct |
| CVE-2025-11749exploit ×2 | 9.8 critical | 75.0% | no CPE yet | The AI Engine plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.1.3 via the /mcp/v1/ REST API endpoint that exposes the 'Bearer Token' value when 'No-Auth URL' is enabled. This makes it possible for unauthenticated attackers to extract the bearer token, which can be used to gain access to a valid session and perform many actions like creating a new administrator account, leading to privilege escalation. | 18 Oct |
| CVE-2026-0740exploit ×9 | 9.8 critical | 63.0% | no CPE yet | The Ninja Forms - File Uploads plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'NF_FU_AJAX_Controllers_Uploads::handle_upload' function in all versions up to, and including, 3.3.26. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. Note: The vulnerability was partially patched in version 3.3.25 and fully patched in version 3.3.27. | Mon 26 Oct |
| CVE-2025-11833exploit | 9.8 critical | 61.0% | no CPE yet | The Post SMTP – Complete SMTP Solution with Logs, Alerts, Backup SMTP & Mobile App plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the __construct function in all versions up to, and including, 3.6.0. This makes it possible for unauthenticated attackers to read arbitrary logged emails sent through the Post SMTP plugin, including password reset emails containing password reset links, which can lead to account takeover. | 18 Oct |
| CVE-2026-53435exploit | 8.8 high | 53.0% | jenkins | In Jenkins 2.567 and earlier, LTS 2.555.2 and earlier, it is possible for attackers to have Jenkins deserialize arbitrary types defined in Jenkins core or plugins from an attacker-controlled `config.xml` submission in a way that allows them to handle HTTP requests afterwards. This can be used to impersonate any user and send HTTP requests on their behalf, up to and including use of the Script Console to run arbitrary code, or to read arbitrary files from the Jenkins controller. | Mon 26 Oct |
| CVE-2025-6440exploit ×9 | 9.8 critical | 33.0% | no CPE yet | The WooCommerce Designer Pro plugin for WordPress, used by the Pricom - Printing Company & Design Services WordPress theme, is vulnerable to arbitrary file uploads due to missing file type validation in the 'wcdp_save_canvas_design_ajax' function in all versions up to, and including, 1.9.26. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 8 Oct |
| CVE-2025-58180exploit ×2 | 7.5 high | 22.0% | octoprint | OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up until and including 1.11.2 contain a vulnerability that allows an authenticated attacker to upload a file under a specially crafted filename that will allow arbitrary command execution if said filename becomes included in a command defined in a system event handler and said event gets triggered. If no event handlers executing system commands with uploaded filenames as parameters have been configured, this vulnerability does not have an impact. The vulnerability is patched in version 1.11.3. As a workaround, OctoPrint administrators who have event handlers configured that include any kind of filename based placeholders should disable those by setting their `enabled` property to `False` or unchecking the "Enabled" checkbox in the GUI based Event Manager. Alternatively, OctoPrint administrators should set `feature.enforceReallyUniversalFilenames` to `true` in `config.yaml` and restart OctoPrint, then vet the existing uploads and make sure to delete any suspicious looking files. As always, OctoPrint administrators are advised to not expose OctoPrint on hostile networks like the public internet, and to vet who has access to their instance. | 19 Oct |
| CVE-2025-12762exploit | 9.8 critical | 13.0% | pgadmin, pgadmin_4 | pgAdmin versions up to 9.9 are affected by a Remote Code Execution (RCE) vulnerability that occurs when running in server mode and performing restores from PLAIN-format dump files. This issue allows attackers to inject and execute arbitrary commands on the server hosting pgAdmin, posing a critical risk to the integrity and security of the database management system and underlying data. | 18 Oct |
| CVE-2025-9816exploit | 7.2 high | 10.0% | no CPE yet | The WP Statistics – The Most Popular Privacy-Friendly Analytics Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the User-Agent Header in all versions up to, and including, 14.5.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 9 Oct |
| CVE-2025-39946exploit | 5.5 medium | 10.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tls: make sure to abort the stream if headers are bogus Normally we wait for the socket to buffer up the whole record before we service it. If the socket has a tiny buffer, however, we read out the data sooner, to prevent connection stalls. Make sure that we abort the connection when we find out late that the record is actually invalid. Retrying the parsing is fine in itself but since we copy some more data each time before we parse we can overflow the allocated skb space. Constructing a scenario in which we're under pressure without enough data in the socket to parse the length upfront is quite hard. syzbot figured out a way to do this by serving us the header in small OOB sends, and then filling in the recvbuf with a large normal send. Make sure that tls_rx_msg_size() aborts strp, if we reach an invalid record there's really no way to recover. | 19 Oct |
| CVE-2024-5535exploit | 9.1 critical | 6.0% | no CPE yet | Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | 15 Oct |
| CVE-2025-13390exploit ×2 | 9.8 critical | 5.0% | wpdirectorykit, wp_directory_kit | The WP Directory Kit plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.4.4 due to incorrect implementation of the authentication algorithm in the "wdk_generate_auto_login_link" function. This is due to the feature using a cryptographically weak token generation mechanism. This makes it possible for unauthenticated attackers to gain administrative access and achieve full site takeover via the auto-login endpoint with a predictable token. | 18 Oct |
| CVE-2026-112195exploit | 2.0 low | 5.0% | no CPE yet | A flaw has been found in FusionPBX up to 5.4.4/5.5.7/5.6.5. The affected element is an unknown function of the file app/dialplans/resources/classes/dialplan.php of the component Dialplan Editor. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 19 Oct |
| CVE-2026-15748exploit ×3 | 9.8 critical | 4.0% | no CPE yet | The Forminator Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.56.1 via the handle_file_upload function. This is due to insufficient file type validation in handle_file_upload, where the dangerous-extension blocklist performs exact-key matching that is bypassed by pipe-alternative MIME type keys, combined with a public submission handler that trusts attacker-controlled upload field configuration injected via a forged Select field value. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. | Thu 22 Oct |
| CVE-2026-46242exploit ×5 | 7.8 high | 4.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: eventpoll: fix ep_remove struct eventpoll / struct file UAF ep_remove() (via ep_remove_file()) cleared file->f_ep under file->f_lock but then kept using @file inside the critical section (is_file_epoll(), hlist_del_rcu() through the head, spin_unlock). A concurrent __fput() taking the eventpoll_release() fastpath in that window observed the transient NULL, skipped eventpoll_release_file() and ran to f_op->release / file_free(). For the epoll-watches-epoll case, f_op->release is ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which kfree()s the watched struct eventpoll. Its embedded ->refs hlist_head is exactly where epi->fllink.pprev points, so the subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed kmalloc-192 memory. In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot backing @file could be recycled by alloc_empty_file() -- reinitializing f_lock and f_ep -- while ep_remove() is still nominally inside that lock. The upshot is an attacker-controllable kmem_cache_free() against the wrong slab cache. Pin @file via epi_fget() at the top of ep_remove() and gate the critical section on the pin succeeding. With the pin held @file cannot reach refcount zero, which holds __fput() off and transitively keeps the watched struct eventpoll alive across the hlist_del_rcu() and the f_lock use, closing both UAFs. If the pin fails @file has already reached refcount zero and its __fput() is in flight. Because we bailed before clearing f_ep, that path takes the eventpoll_release() slow path into eventpoll_release_file() and blocks on ep->mtx until the waiter side's ep_clear_and_put() drops it. The bailed epi's share of ep->refcount stays intact, so the trailing ep_refcount_dec_and_test() in ep_clear_and_put() cannot free the eventpoll out from under eventpoll_release_file(); the orphaned epi is then cleaned up there. A successful pin also proves we are not racing eventpoll_release_file() on this epi, so drop the now-redundant re-check of epi->dying under f_lock. The cheap lockless READ_ONCE(epi->dying) fast-path bailout stays. | 19 Oct |
| CVE-2026-5524exploit | 9.8 critical | 3.0% | no CPE yet | The Divi Form Builder plugin for WordPress is vulnerable to Arbitrary File Upload leading to Remote Code Execution in all versions up to and including 5.1.8. This is due to insufficient file extension validation in the do_image_upload() function where user-supplied input from the acceptFileTypes POST parameter is directly interpolated into a regular expression used to validate uploaded files. Attackers can specify PHP-executable extensions such as .phtml, .phar, .php5, or .php7 to bypass the plugin's .htaccess protection which only blocks .php files specifically. Additionally, on Nginx-based servers, the .htaccess protection is completely ineffective as Nginx does not process .htaccess files. This makes it possible for unauthenticated attackers (who can obtain a nonce from any public page containing a form) to upload executable PHP files to the publicly accessible /wp-content/uploads/de_fb_uploads/ directory and achieve Remote Code Execution by accessing the uploaded file via HTTP. The vulnerability was partially patched in version 5.1.3. | Sun 25 Oct |
| CVE-2026-20896exploit ×8 | 9.8 critical | 3.0% | no CPE yet | Gitea Docker image versions up to and including 1.26.2 use REVERSE_PROXY_TRUSTED_PROXIES=* by default, allowing any source IP to impersonate a user when reverse-proxy authentication headers such as X-WEBAUTH-USER are enabled. | Sun 25 Oct |
| CVE-2026-85097exploit ×5 | 9.8 critical | 3.0% | no CPE yet | The Bricksforge plugin for WordPress is vulnerable to unauthenticated arbitrary file upload in versions up to, and including, 3.1.8.9. This is due to insufficient validation of the attacker-controlled URL field in the 'temporaryFileUploads' parameter during form submission. An unauthenticated attacker can first obtain a valid nonce via the bricksforge_regenerate_nonce AJAX endpoint, then upload a GIF/PHP polyglot file to the temporary upload directory where MIME type validation is correctly performed. Subsequently, the attacker can submit a form with a crafted 'temporaryFileUploads' parameter where the server-side file path points to the validated GIF file, but the attacker-controlled url field ends with a .php extension. This makes it possible for unauthenticated attackers to upload and execute arbitrary PHP code on the server. | 8 Oct |
| CVE-2015-20107exploit | 7.6 high | 3.0% | python, netapp, active_iq_unified_manager, ontap_select_deploy_administration_utility | In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9 | 14 Oct |
| CVE-2026-91136exploit | 7.5 high | 3.0% | no CPE yet | The Divi Plus plugin for WordPress is vulnerable to Arbitrary File Read in versions up to, and including, 2.4.0 via the 'svg_image' parameter of the /wp-json/elicus/v1/dipl-modules/svg-animator REST endpoint. This is due to the endpoint's permission callback (SVGAnimatorController::index_permission) returning true unconditionally combined with insufficient validation of the 'svg_image' input — sanitize_text_field() and esc_html() do not restrict filesystem paths, the file:// stream wrapper, or arbitrary URLs — before it is passed to file_get_contents() (with a wp_remote_get() fallback) and the raw response body is returned in the JSON 'html' field. This makes it possible for unauthenticated attackers to read arbitrary files on the affected site's server which may make remote code execution possible. | 13 Oct |
| CVE-2026-46420exploit | 9.8 critical | 2.0% | shivammathur, setup_php | setup-php is a GitHub action to set up PHP with extensions, php.ini configuration, coverage drivers, and tools. From 2.25.0 prior to 2.37.1, shivammathur/setup-php resolves the PHP version from repository-controlled files such as .php-version, composer.lock through platform-overrides.php, and composer.json through config.platform.php, and insufficiently constrains those values before incorporating them into generated shell or PowerShell setup scripts, allowing command injection on a GitHub Actions runner when workflows such as pull_request_target check out attacker-controlled contents before invoking setup-php. This issue is fixed in version 2.37.1. | Sat 24 Oct |
| CVE-2026-104584exploit | 9.8 critical | 2.0% | no CPE yet | reNgine up to v2.2.0 and current master branch (commit de4199222cca5618f1255930ce78987e47d43a99) is vulnerable to OS Command Injection via the custom_headers scan engine configuration field in web/reNgine/tasks.py (fetch_url and dir_file_fuzz functions). | 19 Oct |
| CVE-2025-13342exploit ×2 | 9.8 critical | 2.0% | no CPE yet | The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to unauthorized modification of arbitrary WordPress options in all versions up to, and including, 3.28.20. This is due to insufficient capability checks and input validation in the ActionOptions::run() save handler. This makes it possible for unauthenticated attackers to modify critical WordPress options such as users_can_register, default_role, and admin_email via submitting crafted form data to public frontend forms. | 18 Oct |
| CVE-2026-89079exploit | 9.8 critical | 2.0% | no CPE yet | The Theme My Login plugin for WordPress is vulnerable to privilege escalation via account takeover in versions up to, and including, 7.2.1. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords on multi-site setups in certain configurations. | 16 Oct |
| CVE-2025-12139exploit | 7.5 high | 2.0% | no CPE yet | The File Manager for Google Drive – Integrate Google Drive with WordPress plugin for WordPress is vulnerable to sensitive information exposure in all versions up to, and including, 1.5.3 via the "get_localize_data" function. This makes it possible for unauthenticated attackers to extract sensitive data including Google OAuth credentials (client_id and client_secret) and Google account email addresses. | 18 Oct |
| CVE-2026-6130exploit | 5.5 medium | 2.0% | no CPE yet | A flaw has been found in chatboxai chatbox up to 1.20.0. This impacts the function StdioClientTransport of the file src/main/mcp/ipc-stdio-transport.ts of the component Model Context Protocol Server Management System. Executing a manipulation of the argument args/env can lead to os command injection. The attack can be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | Mon 26 Oct |
| CVE-2025-12539exploit | 10.0 critical | 1.0% | no CPE yet | The TNC Toolbox: Web Performance plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.4.2. This is due to the plugin storing cPanel API credentials (hostname, username, and API key) in files within the web-accessible wp-content directory without adequate protection in the "Tnc_Wp_Toolbox_Settings::save_settings" function. This makes it possible for unauthenticated attackers to retrieve these credentials and use them to interact with the cPanel API, which can lead to arbitrary file uploads, remote code execution, and full compromise of the hosting environment. | 18 Oct |
| CVE-2026-1555exploit ×3 | 9.8 critical | 1.0% | no CPE yet | The WebStack theme for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the io_img_upload() function in all versions up to, and including, 1.2024. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | Mon 26 Oct |
| CVE-2026-31402exploit | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. | 19 Oct |
| CVE-2026-104736exploit ×3 | 9.8 critical | 1.0% | no CPE yet | The LearnPress plugin for WordPress is vulnerable to PHP Object Injection in versions up to, and including, 4.4.10 via deserialization of untrusted input from the 'checkout-email' request parameter during the checkout AJAX action. The value is passed through sanitize_text_field(), which does not strip serialized object syntax, then stored in the LearnPress session table and later fed to LP_Helper::maybe_unserialize() → unserialize() (without an allowed_classes restriction) by LP_Session_Handler::get() on subsequent requests. This makes it possible for unauthenticated attackers to inject a PHP Object. | 19 Oct |
| CVE-2025-12674exploit | 9.8 critical | 1.0% | no CPE yet | The KiotViet Sync plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the create_media() function in all versions up to, and including, 1.8.5. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-11170exploit | 9.8 critical | 1.0% | no CPE yet | The WP移行専用プラグイン for CPI plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the Cpiwm_Import_Controller::import function in all versions up to, and including, 1.0.2. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-13595exploit | 9.8 critical | 1.0% | no CPE yet | The CIBELES AI plugin for WordPress is vulnerable to arbitrary file uploads due to missing capability check in the 'actualizador_git.php' file in all versions up to, and including, 1.10.8. This makes it possible for unauthenticated attackers to download arbitrary GitHub repositories and overwrite plugin files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-13597exploit | 9.8 critical | 1.0% | no CPE yet | The AI Feeds plugin for WordPress is vulnerable to arbitrary file uploads due to missing capability check in the 'actualizador_git.php' file in all versions up to, and including, 1.0.11. This makes it possible for unauthenticated attackers to download arbitrary GitHub repositories and overwrite plugin files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-12673exploit | 9.8 critical | 1.0% | no CPE yet | The Flex QR Code Generator plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the update_qr_code() function in all versions up to, and including, 1.2.7. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 15 Oct |
| CVE-2026-104748exploit ×2 | 9.8 critical | 1.0% | no CPE yet | The SimpleForm – Form Maker to Chat Apps with Quiz, Poll and Multi Lead Notifications plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.10.0 This is due to the `wp_ajax_nopriv_simpleform_wp_register` AJAX action lacking any capability check for role assignment and the `save_custom_fields_to_user_meta()` function using an exclusion list that omits `wp_capabilities`, combined with `get_form_settings()` returning a hard-coded defaults array that unconditionally enables meta writing regardless of the supplied `form_id`. This makes it possible for unauthenticated attackers to create a new Administrator-level WordPress account by supplying `wp_capabilities[administrator]=1` alongside standard registration fields. The nonce required by the endpoint is publicly emitted into the `front_end_data` JavaScript object on every front-end page via `wp_enqueue_scripts`, making it trivially obtainable by any unauthenticated visitor before submitting the malicious request. | 15 Oct |
| CVE-2026-103889exploit | 9.8 critical | 1.0% | no CPE yet | The 3D Product configurator for WooCommerce plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.16.2 via the 'xpv_image' parameter parameter. This is due to missing authentication and nonce checks on the wp_loaded handler combined with no sanitization of the xpv_image POST parameter before it is echoed unescaped into a Dompdf-rendered HTML template with PHP execution enabled. This makes it possible for unauthenticated attackers to execute code on the server. The only nonce and authentication check in the handler is entirely enclosed in a block comment with no replacement, making the endpoint reachable via a single unauthenticated POST to any URL on the site. | 13 Oct |
| CVE-2025-10147exploit | 9.8 critical | 1.0% | no CPE yet | The Podlove Podcast Publisher plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'move_as_original_file' function in all versions up to, and including, 4.2.6. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 11 Oct |
| CVE-2025-9485exploit | 9.8 critical | 1.0% | no CPE yet | The OAuth Single Sign On – SSO (OAuth Client) plugin for WordPress is vulnerable to Improper Verification of Cryptographic Signature in versions up to, and including, 6.26.12. This is due to the plugin performing unsafe JWT token processing without verification or validation in the `get_resource_owner_from_id_token` function. This makes it possible for unauthenticated attackers to bypass authentication and gain access to any existing user account - including administrators in certain configurations - or to create arbitrary subscriber-level accounts. | 11 Oct |
| CVE-2025-11391exploit ×2 | 9.8 critical | 1.0% | no CPE yet | The PPOM – Product Addons & Custom Fields for WooCommerce plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the image cropper functionality in all versions up to, and including, 33.0.15. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. While the vulnerable code is in the free version, this only affected users with the paid version of the software installed and activated. | 9 Oct |
| CVE-2025-10041exploit ×2 | 9.8 critical | 1.0% | no CPE yet | The Flex QR Code Generator plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in thesave_qr_code_to_db() function in all versions up to, and including, 1.2.5. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 8 Oct |
| CVE-2025-10294exploit | 9.8 critical | 1.0% | no CPE yet | The OwnID Passwordless Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.3.4. This is due to the plugin not properly checking if the ownid_shared_secret value is empty prior to authenticating a user via JWT. This makes it possible for unauthenticated attackers to log in as other users, including administrators, on instances where the plugin has not been fully configured yet. | 8 Oct |
| CVE-2026-97160exploit | 9.4 critical | 1.0% | lomart, up | Joomla Extension - lomart.fr - Authenticated, privileged PHP command injection in UP plugin extension 5.0.0-5.2.0, 6.0.0-6.0.29 | 20 Oct |
| CVE-2026-12087exploit | 9.1 critical | 1.0% | no CPE yet | Socket versions before 2.041 for Perl have an out-of-bounds heap read. In Socket.xs, pack_ip_mreq_source() checks the length of its source argument before the argument is read, so the check tests the byte length carried over from the preceding multiaddr argument instead. Both addresses occupy a 4-byte field, so a valid multiaddr lets a source of any length pass the check, and the source is then copied into the 4-byte imr_sourceaddr field with a fixed-size copy. A source shorter than 4 bytes is not rejected, and the copy reads up to 3 bytes past the end of its buffer. Calling pack_ip_mreq_source() with a source value shorter than 4 bytes copies adjacent heap memory into the returned packed structure. | Sun 25 Oct |
50 of 4529 · Next
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-27. NVD cursor: 2026-10-28 23:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.