Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-23013 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to ioq_vector. If request_irq() fails part-way, the rollback loop calls free_irq() with dev_id set to 'oct', which does not match the original dev_id and may leave the irqaction registered. This can keep IRQ handlers alive while ioq_vector is later freed during unwind/teardown, leading to a use-after-free or crash when an interrupt fires. Fix the error path to free IRQs with the same ioq_vector dev_id used during request_irq(). | 19 Oct |
| CVE-2025-10882 | 7.8 high | 0.00% | autodesk, shared_components | A maliciously crafted X_T file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. | 19 Oct |
| CVE-2026-98368 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: esp: downgrade zerocopy managed frags before mutating skb frags On the out-of-place output path (esp->inplace == false) ESP rewrites the skb frag array: esp_output_head() appends a trailer frag and esp_output_tail() replaces the frags with a destination page, both referenced with get_page(). When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the payload frags are owned by the ubuf and must not be referenced or unreferenced individually, but ESP mutates the frag array without ever downgrading the skb. This breaks the managed-frag invariant two ways: - esp_ssg_unref() walks the source scatterlist and drops a page reference for every frag, including the ubuf-owned payload frags, pushing their refcount below the GUP pin bias while the pages are still pinned, i.e. a use-after-free of the zerocopy pages; - esp_output_tail() installs its destination page as frag 0 with get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so skb_release_data() takes the skip_unref branch and never drops that reference, leaking the x->xfrag page at packet rate. Fix this the way every other frag-mutating site does (__ip_append_data(), __ip6_append_data(), tcp_sendmsg_locked()) and call skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS, so the per-frag unref in esp_ssg_unref() and the frag release in skb_release_data() are both balanced and no mixed-ownership frag array is left behind. | 19 Oct |
| CVE-2026-90007 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Use rollback index when freeing MSI-X vectors pm8001_request_msix() unwinds previously registered handlers with free_irq() when request_irq() fails. The rollback loop uses the failing index i for every iteration instead of the already registered vector index j. That passes the wrong IRQ/dev_id pair to free_irq() and leaves the earlier handlers installed. Use j for both pci_irq_vector() and the matching irq_vector entry in the rollback loop. | 19 Oct |
| CVE-2026-89746 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry, leaving a dangling pointer and leaking the trace_array reference it holds. A later hist trigger that references a variable makes find_var_file() walk tr->hist_vars and dereference the freed hist_data. The bug is reproducible from userspace by writing three hist triggers to tracefs: cd /sys/kernel/tracing echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger The third write panics the kernel: BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290 Read of size 8 at addr ffff888001f8a0e0 by task sh/1 CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N Call Trace: find_var_file.part.0 find_event_var parse_atom parse_expr __create_val_field event_hist_trigger_parse trigger_process_regex event_trigger_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Allocated by task 1: event_hist_trigger_parse Freed by task 1: hist_register_trigger+0x618/0xa30 event_hist_trigger_parse The buggy address belongs to freed 2048-byte region Oops: general protection fault ... RIP: find_var_file.part.0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix by removing the hist_data from tr->hist_vars and releasing the trace_array reference in the named-data branch of hist_register_trigger() before freeing the hist_data. | 19 Oct |
| CVE-2025-46367 | 7.8 high | 0.00% | dell, alienware_command_center | Dell Alienware Command Center 6.x (AWCC), versions prior to 6.10.15.0, contain a Detection of Error Condition Without Action vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Arbitrary Code Execution. | 18 Oct |
| CVE-2025-46369 | 7.8 high | 0.00% | dell, alienware_command_center | Dell Alienware Command Center 6.x (AWCC), versions prior to 6.10.15.0, contains an Insecure Temporary File vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation. | 18 Oct |
| CVE-2026-74447 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) | 16 Oct |
| CVE-2023-54116 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-generic: prohibit potential out-of-bounds access The fbdev test of IGT may write after EOF, which lead to out-of-bound access for drm drivers with fbdev-generic. For example, run fbdev test on a x86+ast2400 platform, with 1680x1050 resolution, will cause the linux kernel hang with the following call trace: Oops: 0000 [#1] PREEMPT SMP PTI [IGT] fbdev: starting subtest eof Workqueue: events drm_fb_helper_damage_work [drm_kms_helper] [IGT] fbdev: starting subtest nullptr RIP: 0010:memcpy_erms+0xa/0x20 RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246 RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0 RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000 RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0 R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80 R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30 FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0 Call Trace: <TASK> ? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper] drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper] process_one_work+0x21f/0x430 worker_thread+0x4e/0x3c0 ? __pfx_worker_thread+0x10/0x10 kthread+0xf4/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> CR2: ffffa17d40e0b000 ---[ end trace 0000000000000000 ]--- The is because damage rectangles computed by drm_fb_helper_memory_range_to_clip() function is not guaranteed to be bound in the screen's active display area. Possible reasons are: 1) Buffers are allocated in the granularity of page size, for mmap system call support. The shadow screen buffer consumed by fbdev emulation may also choosed be page size aligned. 2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip() will introduce off-by-one error. For example, on a 16KB page size system, in order to store a 1920x1080 XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size 1920*1080*4 can not be divided exactly by 16KB. 1920 * 1080 * 4 = 8294400 bytes 506 * 16 * 1024 = 8290304 bytes 507 * 16 * 1024 = 8306688 bytes line_length = 1920*4 = 7680 bytes 507 * 16 * 1024 / 7680 = 1081.6 off / line_length = 507 * 16 * 1024 / 7680 = 1081 DIV_ROUND_UP(507 * 16 * 1024, 7680) will yeild 1082 memcpy_toio() typically issue the copy line by line, when copy the last line, out-of-bound access will be happen. Because: 1082 * line_length = 1082 * 7680 = 8309760, and 8309760 > 8306688 Note that userspace may still write to the invisiable area if a larger buffer than width x stride is exposed. But it is not a big issue as long as there still have memory resolve the access if not drafting so far. - Also limit the y1 (Daniel) - keep fix patch it to minimal (Daniel) - screen_size is page size aligned because of it need mmap (Thomas) - Adding fixes tag (Thomas) | 15 Oct |
| CVE-2022-50241 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: NFSD: fix use-after-free on source server when doing inter-server copy Use-after-free occurred when the laundromat tried to free expired cpntf_state entry on the s2s_cp_stateids list after inter-server copy completed. The sc_cp_list that the expired copy state was inserted on was already freed. When COPY completes, the Linux client normally sends LOCKU(lock_state x), FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server. The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state from the s2s_cp_stateids list before freeing the lock state's stid. However, sometimes the CLOSE was sent before the FREE_STATEID request. When this happens, the nfsd4_close_open_stateid call from nfsd4_close frees all lock states on its st_locks list without cleaning up the copy state on the sc_cp_list list. When the time the FREE_STATEID arrives the server returns BAD_STATEID since the lock state was freed. This causes the use-after-free error to occur when the laundromat tries to free the expired cpntf_state. This patch adds a call to nfs4_free_cpntf_statelist in nfsd4_close_open_stateid to clean up the copy state before calling free_ol_stateid_reaplist to free the lock state's stid on the reaplist. | 15 Oct |
| CVE-2018-12221 | 7.8 high | 0.00% | intel, graphics_driver | Insufficient input validation in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to cause an integer overflow via local access. | 15 Oct |
| CVE-2026-53050 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: quota: Fix race of dquot_scan_active() with quota deactivation dquot_scan_active() can race with quota deactivation in quota_release_workfn() like: CPU0 (quota_release_workfn) CPU1 (dquot_scan_active) ============================== ============================== spin_lock(&dq_list_lock); list_replace_init( &releasing_dquots, &rls_head); /* dquot X on rls_head, dq_count == 0, DQ_ACTIVE_B still set */ spin_unlock(&dq_list_lock); synchronize_srcu(&dquot_srcu); spin_lock(&dq_list_lock); list_for_each_entry(dquot, &inuse_list, dq_inuse) { /* finds dquot X */ dquot_active(X) -> true atomic_inc(&X->dq_count); } spin_unlock(&dq_list_lock); spin_lock(&dq_list_lock); dquot = list_first_entry(&rls_head); WARN_ON_ONCE(atomic_read(&dquot->dq_count)); The problem is not only a cosmetic one as under memory pressure the caller of dquot_scan_active() can end up working on freed dquot. Fix the problem by making sure the dquot is removed from releasing list when we acquire a reference to it. | 15 Oct |
| CVE-2025-68724 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id Use check_add_overflow() to guard against potential integer overflows when adding the binary blob lengths and the size of an asymmetric_key_id structure and return ERR_PTR(-EOVERFLOW) accordingly. This prevents a possible buffer overflow when copying data from potentially malicious X.509 certificate fields that can be arbitrarily large, such as ASN.1 INTEGER serial numbers, issuer names, etc. | 15 Oct |
| CVE-2024-26961 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mac802154: fix llsec key resources release in mac802154_llsec_key_del mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_sendto+0x466/0x4c0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x45/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Also, ieee802154_llsec_key_entry structures are not freed by mac802154_llsec_key_del(): unreferenced object 0xffff8880613b6980 (size 64): comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s) hex dump (first 32 bytes): 78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x......."....... 00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................ backtrace: [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0 [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0 [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0 [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80 [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0 [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0 [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0 [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440 [<ffffffff86ff1d88>] genl_rcv+0x28/0x40 [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820 [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60 [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0 [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0 [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0 [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0 [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Handle the proper resource release in the RCU callback function mac802154_llsec_key_del_rcu(). Note that if llsec_lookup_key() finds a key, it gets a refcount via llsec_key_get() and locally copies key id from key_entry (which is a list element). So it's safe to call llsec_key_put() and free the list entry after the RCU grace period elapses. Found by Linux Verification Center (linuxtesting.org). | 15 Oct |
| CVE-2024-26907 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated--- | 15 Oct |
| CVE-2025-40304 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds Add bounds checking to prevent writes past framebuffer boundaries when rendering text near screen edges. Return early if the Y position is off-screen and clip image height to screen boundary. Break from the rendering loop if the X position is off-screen. When clipping image width to fit the screen, update the character count to match the clipped width to prevent buffer size mismatches. Without the character count update, bit_putcs_aligned and bit_putcs_unaligned receive mismatched parameters where the buffer is allocated for the clipped width but cnt reflects the original larger count, causing out-of-bounds writes. | 14 Oct |
| CVE-2026-19575 | 7.8 high | 0.00% | no CPE yet | The user-mode verification handler for the device_deinit() system call, z_vrfy_device_deinit() in kernel/device.c, validated its dev argument with K_SYSCALL_OBJ_INIT(dev, K_OBJ_ANY). k_object_validate() short-circuits its type comparison when the requested type is K_OBJ_ANY, so the check reduced to "this pointer is the base address of some kernel object the calling thread has been granted" — the object's actual type was never compared, and K_SYSCALL_OBJ_INIT also skips the initialization-state check. The sibling handlers z_vrfy_device_init() and z_vrfy_device_is_ready() already used K_OBJ_DRIVER_ANY and were unaffected. A thread running in user mode can therefore pass any kernel object it holds permission on — most usefully a thread stack object obtained from the k_thread_stack_alloc() syscall or a statically defined K_THREAD_STACK it was granted in order to spawn a child user thread — whose backing memory is writable from user mode. z_impl_device_deinit() then interprets those attacker-written bytes as a struct device: it dereferences the state pointer read out of the object, calls the function pointer read out of ops.deinit, and on success writes through state again. The result is an indirect call to an arbitrary address executed in supervisor mode, plus an arbitrary kernel read and a single-byte kernel write. Exploitation gives a local unprivileged thread full kernel code execution, defeating the CONFIG_USERSPACE isolation boundary entirely; a less precise attempt yields a supervisor-mode fault and a system crash. The defect is only reachable in builds that enable both CONFIG_USERSPACE and CONFIG_DEVICE_DEINIT_SUPPORT — with de-initialization support disabled, z_impl_device_deinit() returns -ENOTSUP without ever dereferencing the pointer. In v4.2.x and v4.3.x, CONFIG_DEVICE_DEINIT_SUPPORT defaulted to y, so every CONFIG_USERSPACE build of those releases is exposed unless the option was explicitly turned off. From v4.4.0 the option is opt-in (no default, and not selected by any in-tree subsystem), so a v4.4.x build is exposed only if it enables the option explicitly. The v4.2 line is no longer maintained and receives no backport. The fix changes the object check to K_OBJ_DRIVER_ANY, which constrains the argument to the build-generated driver object type range (K_OBJ_DRIVER_FIRST..K_OBJ_DRIVER_LAST) — the real struct device instances placed by the linker — so the state and ops.deinit fields are once again kernel-controlled. | 9 Oct |
| CVE-2022-29263 | 7.8 high | 0.00% | f5, access_policy_manager_clients, big-ip_access_policy_manager | On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, the BIG-IP Edge Client Component Installer Service does not use best practice while saving temporary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated | 8 Oct |
| CVE-2026-119027 | 7.7 high | 0.00% | oapi-codegen | oapi-codegen 2.5.0 before 2.8.1 contains a code injection vulnerability that allows attackers to inject Go code by supplying a crafted servers[].x-go-name value emitted unescaped by the server-urls template. Attackers who control an OpenAPI document can define an injected func init() that executes when the victim builds and imports the generated package. | Thu 29 Oct |
| CVE-2026-33356 | 7.7 high | 0.00% | no CPE yet | In Meari IoT Cloud MQTT Broker deployments running EMQX 4.x, any authenticated low-privilege account can subscribe to global wildcard topics and receive telemetry from devices the user does not own. The broker enforces publish restrictions but does not enforce equivalent subscribe authorization at per-device scope. | Mon 26 Oct |
| CVE-2026-110845 | 7.7 high | 0.00% | no CPE yet | n8n before 1.123.83, 2.x before 2.41.4, and 2.42.x before 2.42.1 contains a code execution vulnerability in the Git node Log operation, which fails to strip a repository's local git configuration before invoking an external program. Authenticated members who can point the node, including as an agent tool, at a repository whose local configuration they control can execute programs as the n8n process user. | Mon 26 Oct |
| CVE-2026-56285 | 7.7 high | 0.00% | no CPE yet | Nitter's /video media proxy endpoint fails to validate target URLs against Twitter/X domains and uses a hardcoded default HMAC key, allowing unauthenticated attackers to compute valid HMACs for arbitrary URLs. Attackers can retrieve HTTP responses from any host reachable by the server, including cloud metadata services and internal network resources. | 25 Oct |
| CVE-2026-67357 | 7.7 high | 0.00% | no CPE yet | ArcadeDB versions before 26.7.3 contain an information disclosure vulnerability in the MCP get_server_settings tool that leaks the arcadedb.ha.clusterToken in cleartext. Attackers with MCP access can retrieve the cluster token and use it with X-ArcadeDB-Cluster-Token and X-ArcadeDB-Forwarded-User headers to impersonate root and achieve full server compromise. | 23 Oct |
| CVE-2026-105942 | 7.7 high | 0.00% | no CPE yet | When a configured proxy role sends a request to the broker on behalf of another user (the original principal), the broker is designed to authorize both the proxy role and the original principal and to allow the request only if both are authorized, so that the original principal cannot exceed its own permissions. Two flaws weakened this check. First, the original principal was authorized with the proxy's authentication data instead of its own. On the admin REST API of the broker and the functions worker, this applied to every proxied request. On the Pulsar binary protocol, it applied when the proxy did not forward the client's credentials to the broker, which was the default of the Pulsar proxy in the affected versions. Authorization providers that resolve permissions from the role name only, such as the default authorization provider, are not affected by this flaw. The multi-role token authorization provider (MultiRolesTokenAuthorizationProvider), added in Apache Pulsar 2.8.1, resolves roles from the role claim of the token in the authentication data it is given. When a proxy authenticates to the broker with its own token, the original principal was therefore authorized with all roles in the proxy's token. If any of those roles is a superuser or tenant admin role, any user whose requests are forwarded by that proxy can perform operations that need those permissions without holding them. Custom authorization providers that use the authentication data could be affected in a similar way. Second, independently of the authorization provider, the tenant admin check of a proxied admin REST API request succeeded without checking the original principal when the proxy role was itself an admin role of the tenant. In deployments where a proxy role is a tenant admin, including with the default authorization provider, any user whose requests are forwarded by that proxy could perform tenant administration operations on that tenant. This behavior is present from 2.8.4 in the 2.8.x releases, from 2.9.3 in the 2.9.x releases, and from 2.10.1 onwards. Deployments that use neither the multi-role token authorization provider nor a custom provider that uses the authentication data are not affected by the first flaw, and with the multi-role token authorization provider, neither are deployments whose proxies do not authenticate to the broker with a token. Deployments in which no proxy role is listed as an admin role of a tenant are not affected by the second flaw. A proxy role that is a superuser but is not listed as a tenant admin does not trigger it, because the tenant admin check of the built-in authorization providers only considers the tenant's admin roles; this can differ for custom authorization providers that treat superusers as tenant admins. In fixed versions, both the proxy role and the original principal are authorized for each proxied request, and the original principal is authorized only with its own authentication data. With the multi-role token authorization provider, the roles of a forwarded token are used for the original principal only when that token authenticates as the original principal; otherwise only the original principal's role name is used. For tenant admin checks, the proxy role and the original principal must each be a superuser or a tenant admin of the tenant. This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. | 23 Oct |
| CVE-2026-105945 | 7.7 high | 0.00% | no CPE yet | The Pulsar Packages Management Service can be configured to store packages on the local filesystem of the broker by using the filesystem storage provider. Package names consist of a type, tenant, namespace, name and version. Authorization of package operations is based only on the tenant and namespace, while the storage location of a package is derived from all of these components. The version component of a package name was not validated, so it could contain URL-encoded path separators and parent directory references. The filesystem storage provider resolved such a version to a location belonging to a package in a different tenant or namespace. Because that location is inside the configured storage directory, the containment check that the filesystem storage provider performs in recent releases did not prevent the access. An authenticated user who has the packages permission on any namespace could use this to download, overwrite or delete packages stored in other tenants or namespaces for which the user has no permission. Packages overwritten or deleted in this way may be used by Pulsar Functions, Sources or Sinks, so the issue can affect the integrity and availability of these components. If authentication is disabled, the operations are available to any client that can reach the broker's admin REST API. This issue only affects deployments in which package management is enabled with the broker setting enablePackagesManagement and the filesystem storage provider (FileSystemPackagesStorageProvider) is configured with the setting packagesManagementStorageProvider. Package management is disabled by default, and the default storage provider, which stores packages in Apache BookKeeper, is not affected. This issue affects Apache Pulsar versions from 2.10.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. | 23 Oct |
| CVE-2026-85966 | 7.7 high | 0.00% | no CPE yet | Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 do not sufficiently restrict access to certain security-sensitive information. A remote authenticated attacker with limited management permissions could obtain this information, which could result in unauthorized access to protected resources. | 15 Oct |
| CVE-2026-85964 | 7.7 high | 0.00% | no CPE yet | Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 allow an authenticated Query Console user to supply unsafe path values to a privileged filesystem helper, which could result in disclosure of arbitrary server files. | 15 Oct |
| CVE-2026-110842 | 7.7 high | 0.00% | no CPE yet | n8n before 2.41.4 and 2.42.x before 2.42.1 contains a prototype pollution vulnerability in the MCP workflow-validation tool, whose interpreter evaluates caller-supplied code in the main process, reads inherited properties, and permits assignment onto shared prototypes. An authenticated member holding only a workflow:read grant can replace a built-in method with one returning a truthy value so server-side permission checks accept unheld scopes, enabling takeover of owner accounts not protected by MFA. | 15 Oct |
| CVE-2026-111089 | 7.6 high | — | apache software foundation, apache wicket | Apache Wicket reads texts from the application's resource bundles — a localized label, a css class name — and writes some of them into the JavaScript and the markup it generates for a component. Those texts are placed inside single-quoted JavaScript string literals and inside quoted attribute values without being escaped for that context, so a text containing a quote ends the literal or the attribute, and what follows is parsed as script or as markup in the application's origin when the page loads. A resource bundle entry is authored for the application and does not say where the framework will write it. The same key is read by the framework into element text, where Wicket escapes it, and into the contexts below, where it did not. A text containing an apostrophe, which is ordinary in several languages, is enough to break the page; a text under the influence of another party is enough to run script. In org.apache.wicket:wicket-core, org.apache.wicket.markup.html.form.upload.MultiFileUploadField writes the org.apache.wicket.mfu.delete message into a JavaScript string literal, and org.apache.wicket.markup.html.form.Form writes the hidden-fields css class into the class attribute of the container it renders for its hidden fields; on 8.0.0 through 8.19.0 and 9.0.0 through 9.24.0 Form#appendDefaultButtonField writes the same css class into a second container. In org.apache.wicket:wicket-extensions, UploadProgressBar writes its UploadProgressBar.starting text into a JavaScript string literal, FilterForm writes the hidden-fields css class into the class attribute of its hidden input markup, and on 9.0.0 through 9.24.0 and 10.0.0 through 10.11.0 TrapFocusBehavior writes its current css class into a JavaScript string literal. The Content-Security-Policy that Apache Wicket 9.x and 10.x send by default does not prevent the JavaScript cases: the generated script is written into a script element carrying the per-response nonce, so the injected code is part of a script the policy admits. It does prevent an inline event handler injected through the attribute cases. This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. | 7 h ago |
| CVE-2026-95863 | 7.6 high | — | apache software foundation, apache wicket | Improper neutralization of input during web page generation in Apache Wicket. Apache Wicket generates JavaScript that refers to the elements it renders, and writes into that JavaScript two values it derives itself: a component's markup id, and the input name of a form component, which is built from component ids. Both are placed inside single-quoted JavaScript string literals without being escaped for that context, so a value containing a single quote or a backslash ends the literal, and what follows is parsed as script and runs in the application's origin when the page loads. A markup id is the value passed to org.apache.wicket.Component#setMarkupId(String), or the id attribute written in the component's markup, or an id Wicket generates, in that order. The first two are supplied by the application in an HTML context, where both characters are legal and where Wicket escapes them correctly when it writes the same value into the id attribute of the element; a generated id cannot contain either. An input name is derived from the ids of the components between the form and the form component, and a component id was rejected only for ':' and '~'. In org.apache.wicket:wicket-core on 9.x and 10.x, org.apache.wicket.markup.head.OnEventHeaderItem#forMarkupId(String, String, CharSequence) quotes the id it is given into a Wicket.Event.add call, and components in both wicket-core and wicket-extensions reach it through #forComponent(Component, String, CharSequence). On every affected version, org.apache.wicket.markup.html.form.Form writes its markup id and the id of its hidden-fields container into such literals, org.apache.wicket.markup.html.form.FormComponentUpdatingBehavior writes an input name, and org.apache.wicket.markup.html.form.upload.MultiFileUploadField writes two markup ids and an input name. On 8.x, Form also writes an input name into the action of a submitting link, and on 8.x and 9.x Form#appendDefaultButtonField writes an input name into a name attribute with no escaping at all, so a value containing a double quote escapes the attribute into markup. org.apache.wicket:wicket-extensions is affected in its own right and not only through wicket-core: AjaxEditableLabel, AjaxIndicatorAppender, AjaxDisableComponentListener, UploadProgressBar, KittenCaptchaPanel, Palette, FilterForm and, on 9.x and 10.x, TrapFocusBehavior and AjaxListPanel each build their own JavaScript containing a markup id. An application is affected where a markup id or a component id carries one of those characters. Wicket does not put one there itself, so the value comes from the application: an id set on a component, an id attribute in a template, or a component id derived from data. None of those is a JavaScript context from the application's point of view. The Content-Security-Policy that Apache Wicket 9.x and 10.x send by default does not prevent this. The generated script is written into a script element carrying the per-response nonce, so the injected code is part of a script the policy admits. The fixed versions check an id where it enters instead of escaping each place it is written. A component id and a markup id may no longer contain a quote, a backquote, a backslash, braces, angle brackets, a semicolon, an ampersand or a control character, and a markup id may not contain parentheses or square brackets either; a component constructed with such an id, or given such a markup id, fails with an exception. This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. | 8 h ago |
| CVE-2025-13292 | 7.6 high | 0.00% | no CPE yet | A vulnerability in Apigee-X allowed an attacker to gain unauthorized read and write access to Apigee Analytics (AX) data and access logs belonging to other Apigee customer organizations. Apigee-X was found to be vulnerable. This vulnerability was patched in version 1-16-0-apigee-3. No user action is required for this. | 15 Oct |
| CVE-2026-6347 | 7.6 high | 0.00% | mattermost, mattermost_server | Mattermost versions 11.5.x <= 11.5.1, 10.11.x <= 10.11.13, 11.4.x <= 11.4.3 fail to sanitize sensitive configuration fields in the Mattermost Calls plugin which allows an attacker with access to a support packet to obtain TURN server credentials via the plaintext values present in the exported plugin configuration.. Mattermost Advisory ID: MMSA-2026-00605 | 14 Oct |
| CVE-2026-62264 | 7.5 high | 0.00% | sylphxai, pdf-reader-mcp | PDF Reader MCP is a Model Context Protocol server for reading PDF documents. In versions 2.2.0 and later prior to 3.0.1, when `MCP_TRANSPORT=http` enables the opt-in HTTP server, `@sylphx/pdf-reader-mcp` reads `MCP_API_KEY` and logs that `X-API-Key` authentication is enabled but never validates the `X-API-Key` header on incoming requests. The `/mcp` endpoint consequently accepts unauthenticated clients. With the default bind address of `0.0.0.0`, any client able to reach the port can invoke every PDF tool and read any PDF the server process can open on the host, despite the misleading authentication-enabled startup log. URL-based sources additionally permit limited server-side request forgery; private and loopback destinations are blocked by default unless `--allow-private-ips` is set. The default `stdio` transport is unaffected. This issue is fixed in version 3.0.1. | Fri 30 Oct |
| CVE-2026-110732 | 7.5 high | 0.00% | tigroumeow, ai engine – mcp server & ai chatbot for wordpress, with claude, chatgpt & gemini | The AI Engine – The Chatbot, AI Framework & MCP for WordPress plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.8.6 This is due to the MCP module's OAuth 2.1 Dynamic Client Registration endpoint (/wp-json/mcp/v1/oauth/register) being registered with a permission_callback of __return_true, allowing an unauthenticated user to register an active OAuth client with an attacker-controlled redirect URI. This makes it possible for unauthenticated attackers to obtain an administrator-bound MCP access token, and thereby full administrator-level control through the MCP tools (including user creation and option updates), once an administrator approves the attacker's client on the OAuth consent screen. The consent page is additionally served without X-Frame-Options or Content-Security-Policy frame-ancestors, so that approval can be obtained via clickjacking. | Fri 30 Oct |
| CVE-2026-110747 | 7.5 high | 0.00% | no CPE yet | ProtobufParser._readStringKey() reads the length prefix of a protobuf map entry's string key into an attacker-controlled int and then checks (_inputPtr + len) <= _inputEnd using signed arithmetic. For values near Integer.MAX_VALUE the addition overflows to a negative value and the check passes even when the input contains no key data. The parser then calls _finishShortText(len), which expands the text buffer to the declared length via TextBuffer.expandCurrentSegment and Arrays.copyOf, throwing OutOfMemoryError: Requested array size exceeds VM limit. An 8-byte malformed message containing a map entry with a declared key length of 0x7FFFFFFF is sufficient. Configured StreamReadConstraints, including maxStringLength, maxNameLength, maxDocumentLength and maxNestingDepth, do not prevent the failure. Applications running with -XX:+ExitOnOutOfMemoryError terminate the JVM. This is the same integer-overflow pattern addressed for other call sites in the remediation associated with CVE-2026-104016 and CVE-2026-104017; the map-key call site was corrected on the 3.x branches only, leaving the corresponding 2.x branches unguarded. Release lines 2.18, 2.19 and 2.20 do not contain _readStringKey() and are not affected by this vector. No privileges or user interaction beyond the ability to submit data for parsing are required. The 3.0 release line and 3.1.0-3.1.5 / 3.2.0-3.2.1 do not contain _readStringKey() and are therefore not affected; the method first appears in 3.1.6 and 3.2.2, mirroring its introduction at 2.21.6 on the 2.x side. | Wed 28 Oct |
| CVE-2026-109089 | 7.5 high | 0.00% | no CPE yet | A buffer overflow when handling DEVICE_RESOLUTION in libXi before 1.8.4 could overflow a heap, triggered by a malicious X server. | Wed 28 Oct |
| CVE-2026-109090 | 7.5 high | 0.00% | no CPE yet | A malicious X server could cause a heap overflow by injecting a large DEVICE_ENABLE reply when processed by libXi before 1.8.4. | Wed 28 Oct |
| CVE-2026-22750 | 7.5 high | 0.00% | vmware, spring_cloud_gateway | When configuring SSL bundles in Spring Cloud Gateway by using the configuration property spring.ssl.bundle, the configuration was silently ignored and the default SSL configuration was used instead. Note: The 4.2.x branch is no longer under open source support. If you are using Spring Cloud Gateway 4.2.0 and are not an enterprise customer, you can upgrade to any Spring Cloud Gateway 4.2.x release newer than 4.2.0 available on Maven Centeral https://repo1.maven.org/maven2/org/springframework/cloud/spring-cloud-gateway/ . Ideally if you are not an enterprise customer, you should be upgrading to 5.0.2 or 5.1.1 which are the current supported open source releases. | Mon 26 Oct |
| CVE-2026-3902 | 7.5 high | 0.00% | djangoproject, django | An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and 4.2 before 4.2.30. `ASGIRequest` allows a remote attacker to spoof headers by exploiting an ambiguous mapping of two header variants (with hyphens or with underscores) to a single version with underscores. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Tarek Nakkouch for reporting this issue. | Mon 26 Oct |
| CVE-2026-40981 | 7.5 high | 0.00% | vmware, spring_cloud_config | When using Google Secrets Manager as a backend for the Spring Cloud Config server a client can craft a request to the config server potentially exposing secrets from unintended GCP projects. Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater. | Mon 26 Oct |
| CVE-2026-33357 | 7.5 high | 0.00% | no CPE yet | In Meari client applications embedding "com.meari.sdk" (including CloudEdge 5.5.0 build 220, Arenti 1.8.1 build 220, and related white-label <= 1.8.x), the integrated call path to openapi-euce.mearicloud.com can be abused to retrieve WAN IP data for arbitrary devices. The root cause is a server-side authorization failure in "GET /openapi/device/status". | Mon 26 Oct |
| CVE-2026-33361 | 7.5 high | 0.00% | no CPE yet | In Meari IoT SDK image handling (libmrplayer.so) as observed in CloudEdge 5.5.0 (build 220), Arenti 1.8.1 (build 220), and related white-label apps (<= 1.8.x), baby monitor ".jpgx3" files use reversible XOR over only the first 1024 bytes with a predictable key derivation model. | Mon 26 Oct |
| CVE-2026-42551 | 7.5 high | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, Request::getMethod() unconditionally honors the X-HTTP-Method-Override header and the $_REQUEST['_method'] parameter on any HTTP verb (including safe verbs such as GET), with no opt-in and no whitelist of permitted target methods. A GET request can silently become a DELETE or PUT, enabling CSRF escalation against destructive endpoints, bypass of middleware gated on unsafe verbs, and cache poisoning between CDN and origin. This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-45357 | 7.5 high | 0.00% | no CPE yet | LiquidJS is a Shopify/GitHub Pages compatible template engine written in pure JavaScript. In versions 10.25.7 and below, the date filter's strftime implementation parses width specifiers like %9999999d and forwards the captured width unchecked into pad()/padStart(), leading to memory and render limit bypass. In src/util/underscore.ts, the pad loop performs unbounded string concatenation without consulting the Context's memoryLimit or renderLimit, so a single small template ({{ x | date: '%5000000d' }}) produces megabytes of output and unbounded CPU. The memoryLimit and renderLimit options the docs (src/liquid-options.ts:87-92) advertise as DoS controls — and which the docstring explicitly mentions for strftime — are entirely bypassed. Exploitation can cause large memory allocations, high CPU usage, or OOM crashes per render. This issue has been fixed in version 10.26.0. | Mon 26 Oct |
| CVE-2026-40046 | 7.5 high | 0.00% | no CPE yet | Integer Overflow or Wraparound vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ MQTT. The fix for "CVE-2025-66168: MQTT control packet remaining length field is not properly validated" was only applied to 5.19.2 (and future 5.19.x) releases but was missed for all 6.0.0+ versions. This issue affects Apache ActiveMQ: from 6.0.0 before 6.2.4; Apache ActiveMQ All: from 6.0.0 before 6.2.4; Apache ActiveMQ MQTT: from 6.0.0 before 6.2.4. Users are recommended to upgrade to version 6.2.4 or a 5.19.x version starting with 5.19.2 or later (currently latest is 5.19.5), which fixes the issue. | 26 Oct |
| CVE-2026-47835 | 7.5 high | 0.00% | vmware, spring_ai | In Spring AI Vector Stores, special characters could be used to force the execution of arbitrary queries in Elasticsearch, OpenSearch, and GemFire VectorDB. Affected components: spring-ai-elasticsearch-store, spring-ai-opensearch-store, spring-ai-gemfire-store. Affected versions: Spring AI 1.0.0 through 1.0.x (fix 1.0.9). Spring AI 1.1.0 through 1.1.x (fix 1.1.8). | 25 Oct |
| CVE-2026-53539 | 7.5 high | 0.00% | fastapiexpert, python-multipart | Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.30, when parsing application/x-www-form-urlencoded bodies, QuerystringParser located the field separator with a two step lookup: it first scanned the entire remaining buffer for &, and only when no & existed anywhere ahead did it fall back to scanning for ;. For a body that uses ; as the separator and contains no &, every field iteration performed a full failed & scan over the entire remaining buffer before locating the nearby ;. With N semicolon separated fields in a chunk of size B, this yields O(B^2) byte comparisons per chunk. An attacker can submit a small crafted body of the form a;a;a;... and cause the parser to spend seconds of CPU per request. A handful of concurrent requests can exhaust worker processes. This vulnerability is fixed in 0.0.30. | 25 Oct |
| CVE-2026-54283 | 7.5 high | 0.00% | encode, starlette | Starlette is a lightweight ASGI framework/toolkit. From 0.4.1 until 1.3.1, request.form() accepts max_fields and max_part_size to bound resource consumption while parsing form data. These limits are enforced for multipart/form-data, but silently ignored for application/x-www-form-urlencoded. An unauthenticated attacker can therefore send a urlencoded body with an arbitrarily large number of fields or an arbitrarily large field, even when the application configured limits it believed would apply. This vulnerability is fixed in 1.3.1. | 25 Oct |
| CVE-2026-41896 | 7.5 high | 0.00% | no CPE yet | Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.474, the HMAC key is the application's manual_webhook_secret_github field, which is used by Coolify's webhook endpoints to validate incoming requests, is nullable with no default — meaning newly created applications have a null webhook secret. PHP's hash_hmac() function silently coerces a null key to an empty string ''. So when the secret is null, the server computes hash_hmac('sha256', $payload, '') — a deterministic value that any attacker can calculate independently. By sending X-Hub-Signature-256: sha256=<hash_hmac('sha256', payload, '')>, an unauthenticated attacker can forge a valid signature and trigger deployments. This vulnerability is fixed in 4.0.0-beta.474. | 25 Oct |
| CVE-2026-65370 | 7.5 high | 0.00% | apple, servicetalk | ServiceTalk HTTP/1.x incorrectly handles malformed Transfer-Encoding which could result in request smuggling attacks. This vulnerability is addressed in servicetalk version 0.42.65. | 24 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.