Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-64401 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: client: resolve SWN tcon from live registrations cifs_swn_notify() looks up a witness registration by id under cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's cached tcon pointer. That pointer is not a lifetime reference, and it is not a stable representative once cifs_get_swn_reg() lets multiple tcons for the same net/share name share one registration id. A same-share second mount can keep the cifs_swn_reg alive after the first tcon unregisters and is freed. The registration then still points at the freed first tcon, so taking tc_lock or incrementing tc_count through swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while holding cifs_swnreg_idr_mutex also violates the documented CIFS lock order. Fix this by making the registration store only the stable witness identity: id, net name, share name, and notify flags. When a notify arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex, then find and pin a live witness tcon that currently matches the net/share pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification path uses that pinned tcon directly and drops the reference when done. Registration and unregister messages now use the live tcon passed by the caller instead of a cached tcon in the registration. The final unregister send is folded into cifs_swn_unregister() while the registration is still protected by cifs_swnreg_idr_mutex. This removes the previous find/drop/reacquire raw-pointer window. The release path only removes the idr entry and frees the stable identity strings. This preserves the intended one-registration/many-tcon behavior: a registration id represents a net/share pair, and notify handling acts on a live representative selected at use time. It also preserves CLIENT_MOVE ordering for the representative tcon because the old-IP unregister is sent before cifs_swn_register() sends the new-IP register. | 19 Oct |
| CVE-2026-64114 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. | 19 Oct |
| CVE-2026-63970 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule. | 19 Oct |
| CVE-2025-40206 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^ | 19 Oct |
| CVE-2025-39723 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix unbuffered write error handling If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter(). LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them. Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero. This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed: CIFS: VFS: Send error in write = -28 followed by: BUG: kernel NULL pointer dereference, address: 0000000000000008 with: RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0 or: RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755) Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to. | 19 Oct |
| CVE-2025-39828 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control(). syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: | 19 Oct |
| CVE-2025-39993 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: media: rc: fix races with imon_disconnect() Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __create_pipe include/linux/usb.h:1945 [inline] send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991 vfs_write+0x2d7/0xdd0 fs/read_write.c:576 ksys_write+0x127/0x250 fs/read_write.c:631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The iMON driver improperly releases the usb_device reference in imon_disconnect without coordinating with active users of the device. Specifically, the fields usbdev_intf0 and usbdev_intf1 are not protected by the users counter (ictx->users). During probe, imon_init_intf0 or imon_init_intf1 increments the usb_device reference count depending on the interface. However, during disconnect, usb_put_dev is called unconditionally, regardless of actual usage. As a result, if vfd_write or other operations are still in progress after disconnect, this can lead to a use-after-free of the usb_device pointer. Thread 1 vfd_write Thread 2 imon_disconnect ... if usb_put_dev(ictx->usbdev_intf0) else usb_put_dev(ictx->usbdev_intf1) ... while send_packet if pipe = usb_sndintpipe( ictx->usbdev_intf0) UAF else pipe = usb_sndctrlpipe( ictx->usbdev_intf0, 0) UAF Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by checking ictx->disconnected in all writer paths. Add early return with -ENODEV in send_packet(), vfd_write(), lcd_write() and display_open() if the device is no longer present. Set and read ictx->disconnected under ictx->lock to ensure memory synchronization. Acquire the lock in imon_disconnect() before setting the flag to synchronize with any ongoing operations. Ensure writers exit early and safely after disconnect before the USB core proceeds with cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 19 Oct |
| CVE-2026-68284 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg() tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which drops and reacquires the socket lock. Its error path tries to decide whether msg_tx names the local temporary message by comparing it with the current value of psock->cork. This comparison is unsafe when two threads send on the same socket: Thread A Thread B msg_tx = psock->cork sk_msg_alloc() fails sk_stream_wait_memory() releases the socket lock acquires the socket lock completes the cork psock->cork = NULL frees the cork reacquires the socket lock msg_tx != psock->cork sk_msg_free(msg_tx) The stale cork is therefore mistaken for the local temporary message and freed again. KASAN reported: BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50 Read of size 4 at addr ffff88810c908800 by task poc/90 Call Trace: sk_msg_free+0x49/0x50 tcp_bpf_sendmsg+0x14f5/0x1cc0 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 89: __kasan_kmalloc+0x8f/0xa0 tcp_bpf_sendmsg+0x16b3/0x1cc0 Freed by task 91: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 tcp_bpf_sendmsg+0xec3/0x1cc0 msg_tx can only name the stack-local tmp or the shared cork. Check for tmp directly so a changed psock->cork cannot turn a shared message into an apparent local one. | 19 Oct |
| CVE-2026-64581 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm: fix sk_dst_cache double-free in xfrm_user_policy() xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe the same old dst and each dst_release() it, dropping the socket's single reference twice and freeing the xfrm_dst bundle while it is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053) do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347) ip_setsockopt (net/ipv4/ip_sockglue.c:1417) do_sock_setsockopt (net/socket.c:2368) __sys_setsockopt (net/socket.c:2393) __x64_sys_setsockopt (net/socket.c:2396) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Reachable by an unprivileged user via a user+network namespace. Use the atomic sk_dst_reset() so the cache is cleared and released with a single xchg(): whichever side wins releases the dst once, the other sees NULL and does nothing. Behaviour is otherwise unchanged. | 19 Oct |
| CVE-2026-53273 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tee: optee: prevent use-after-free when the client exits before the supplicant Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the client wait as killable so it can be interrupted during shutdown or after a supplicant crash. This changes the original lifetime expectations: the client task can now terminate while the supplicant is still processing its request. If the client exits first it removes the request from its queue and kfree()s it, while the request ID remains in supp->idr. A subsequent lookup on the supplicant path then dereferences freed memory, leading to a use-after-free. Serialise access to the request with supp->mutex: * Hold supp->mutex in optee_supp_recv() and optee_supp_send() while looking up and touching the request. * Let optee_supp_thrd_req() notice that the client has terminated and signal optee_supp_send() accordingly. With these changes the request cannot be freed while the supplicant still has a reference, eliminating the race. | 19 Oct |
| CVE-2026-52935 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: do not reuse an in-progress partial send espintcp keeps a single in-flight transmit in ctx->partial. Before building a new sk_msg, espintcp_sendmsg() first tries to flush that state through espintcp_push_msgs(). For blocking callers, espintcp_push_msgs() may return success even when the previous partial send is still pending. espintcp_sendmsg() would then reinitialize emsg->skmsg and reuse ctx->partial while the old transfer still owns that state. Do not rebuild the send message when ctx->partial is still in progress. If espintcp_push_msgs() returns with emsg->len still set, fail the new send instead of overwriting the live partial state. This is a memory-safety fix: reusing the live partial-send state can leave a stale offset attached to a new sk_msg and lead to an out-of- bounds read in the send path. tcp_sendmsg_locked() already handles waiting for send buffer memory, so the fix here is just to preserve espintcp's one-message-at-a-time transmit state. | 19 Oct |
| CVE-2026-45970 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix UAF in rlb_arp_recv during bond up/down The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN. However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag. [ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI [ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] [ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary) [ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022 [ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding] [ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00 [ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206 [ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e [ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8 [ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8 [ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119 [ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810 [ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000 [ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0 [ 214.310347] Call Trace: [ 214.313070] <IRQ> [ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding] [ 214.320975] bond_handle_frame+0x166/0xb60 [bonding] [ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] [ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710 [ 214.339199] ? __pfx_arp_process+0x10/0x10 [ 214.343775] ? sched_balance_find_src_group+0x98/0x630 [ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10 [ 214.356513] ? arp_rcv+0x307/0x690 [ 214.360311] ? __pfx_arp_rcv+0x10/0x10 [ 214.364499] ? __lock_acquire+0x58c/0xbd0 [ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0 [ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 214.380743] ? lock_acquire+0x10b/0x140 [ 214.385026] process_backlog+0x3f1/0x13a0 [ 214.389502] ? process_backlog+0x3aa/0x13a0 [ 214.394174] __napi_poll.constprop.0+0x9f/0x370 [ 214.399233] net_rx_action+0x8c1/0xe60 [ 214.403423] ? __pfx_net_rx_action+0x10/0x10 [ 214.408193] ? lock_acquire.part.0+0xbd/0x260 [ 214.413058] ? sched_clock_cpu+0x6c/0x540 [ 214.417540] ? mark_held_locks+0x40/0x70 [ 214.421920] handle_softirqs+0x1fd/0x860 [ 214.426302] ? __pfx_handle_softirqs+0x10/0x10 [ 214.431264] ? __neigh_event_send+0x2d6/0xf50 [ 214.436131] do_softirq+0xb1/0xf0 [ 214.439830] </IRQ> The issue is reproducible by repeatedly running ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry. Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize(). | 19 Oct |
| CVE-2026-63977 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer. | 19 Oct |
| CVE-2026-31667 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) | 19 Oct |
| CVE-2026-31419 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== | 19 Oct |
| CVE-2026-23449 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: Fix double-free in teql_master_xmit Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should be called using the seq_lock to avoid racing with the datapath. Failure to do so may cause crashes like the following: [ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139) [ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318 [ 238.029749][ T318] [ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full) [ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 238.029910][ T318] Call Trace: [ 238.029913][ T318] <TASK> [ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122) [ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) ... [ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563) [ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231) [ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1)) [ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139) ... [ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256) [ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827) [ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) ... [ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034) [ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157) [ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077) [ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091) [ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556) ... [ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s: [ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58) [ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5)) [ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369) [ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921) [ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107)) [ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713) [ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763) [ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997) [ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108) [ 238.081469][ T318] [ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s: [ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58) [ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5)) [ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1)) [ 238.085900][ T318] __kasan_slab_free (mm/ ---truncated--- | 19 Oct |
| CVE-2026-23340 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. | 19 Oct |
| CVE-2026-23243 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80 | 19 Oct |
| CVE-2025-59050 | 7.8 high | 0.00% | getgreenshot, greenshot | Greenshot is an open source Windows screenshot utility. Greenshot 1.3.300 and earlier deserializes attacker-controlled data received in a WM_COPYDATA message using BinaryFormatter.Deserialize without prior validation or authentication, allowing a local process at the same integrity level to trigger arbitrary code execution inside the Greenshot process. The vulnerable logic resides in a WinForms WndProc handler for WM_COPYDATA (message 74) that copies the supplied bytes into a MemoryStream and invokes BinaryFormatter.Deserialize, and only afterward checks whether the specified channel is authorized. Because the authorization check occurs after deserialization, any gadget chain embedded in the serialized payload executes regardless of channel membership. A local attacker who can send WM_COPYDATA to the Greenshot main window can achieve in-process code execution, which may aid evasion of application control policies by running payloads within the trusted, signed Greenshot.exe process. This issue is fixed in version 1.3.301. No known workarounds exist. | 19 Oct |
| CVE-2025-62526 | 7.8 high | 0.00% | openwrt | OpenWrt Project is a Linux operating system targeting embedded devices. Prior to version 24.10.4, ubusd contains a heap buffer overflow in the event registration parsing code. This allows an attacker to modify the head and potentially execute arbitrary code in the context of the ubus daemon. The affected code is executed before running the ACL checks, all ubus clients are able to send such messages. In addition to the heap corruption, the crafted subscription also results in a bypass of the listen ACL. This is fixed in OpenWrt 24.10.4. There are no workarounds. | 19 Oct |
| CVE-2026-98361 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO pages") dropped the access permission test from rxe_check_pagefault() and left only HMM_PFN_VALID. A page faulted in read-only, for example a page-cache folio behind a PROT_READ file mapping, then satisfies the check and ODP write operations (RDMA WRITE, RDMA READ response, SEND payload, atomics) modify it through kmap without ever breaking CoW. An unprivileged user can register an ODP MR over such a mapping and have incoming RDMA traffic overwrite the page cache of a file it only holds O_RDONLY, including /etc/passwd or setuid binaries. This is the same primitive class as Dirty COW and CVE-2022-2590. mlx5 has the missing invariant: its ODP path sets the device write bit only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring HMM_PFN_WRITE in rxe_check_pagefault() for every operation except RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting forever. For a writable VMA the fault breaks CoW and the write lands in the private page. Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never modifies memory, and the FLUSH access bits do not make the umem writable, so classifying flushes as writes would make every flush against a flush-only MR fail. | 19 Oct |
| CVE-2026-90071 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: restore skb->dev on the slave failure path teql_master_xmit() sets skb->dev = slave before calling the slave's ndo_start_xmit(), but never restores it when that transmit fails. The skb then walks on to the next slave still pointing at the previous one. If a later slave has no resolved neighbour, teql_resolve() hands the skb to neigh_event_send(), which queues it on that neighbour's arp_queue with the stale skb->dev. skb->dev holds no reference, so deleting the previous slave frees the net_device while the skb is still queued. Whatever runs next on that skb - arp_error_report() on timeout, or neigh_direct_output() -> dev_queue_xmit() once the neighbour resolves - causes a UAF like the one below: BUG: KASAN: slab-use-after-free in __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) Read of size 4 at addr ffff888106e100b0 by task flood_packet/527 CPU: 0 UID: 0 PID: 527 Comm: flood_packet Not tainted 7.2.0-rc6-g594d90519502 #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) ? __pfx__raw_spin_lock_irqsave (./include/asm-generic/qrwlock.h:122 (discriminator 4)) ? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) kasan_report (mm/kasan/report.c:595) ? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) [...] ipv4_link_failure (net/ipv4/route.c:1251 net/ipv4/route.c:1258) ? __pfx_ipv4_link_failure (./include/linux/skbuff.h:4327) ? _raw_write_lock (./include/linux/instrumented.h:55 ./include/linux/atomic/atomic-instrumented.h:1301 ./include/asm-generic/qrwlock.h:98 ./include/linux/rwlock_api_smp.h:230 kernel/locking/spinlock.c:304) ? __pfx__raw_write_lock (kernel/locking/spinlock.c:175) arp_error_report (./include/net/dst.h:438 net/ipv4/arp.c:296) neigh_invalidate (net/core/neighbour.c:1077) neigh_timer_handler (net/core/neighbour.c:1169) [...] Allocated by task 505: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5334 mm/slub.c:6905) alloc_netdev_mqs (net/core/dev.c:12055 (discriminator 2)) rtnl_create_link (net/core/rtnetlink.c:3721) rtnl_newlink (net/core/rtnetlink.c:3903 net/core/rtnetlink.c:4044 net/core/rtnetlink.c:4159) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) [...] Freed by task 536: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6377 mm/slub.c:6692) device_release (drivers/base/core.c:2636) kobject_put (lib/kobject.c:689 lib/kobject.c:720 ./include/linux/kref.h:65 lib/kobject.c:737) netdev_run_todo (net/core/dev.c:11756) rtnl_dellink (net/core/rtnetlink.c:157 ./include/linux/rtnetlink.h:135 net/core/rtnetlink.c:3651) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) [...] Fix this by restoring skb->dev to the master at the end of each slave's iteration. | 19 Oct |
| CVE-2026-89605 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a message context from the free list to the allocated list before sending the request to the userspace daemon. If ecryptfs_send_miscdev() fails, the context is left on the allocated list and cannot be reused. Move it back to the free list on failure and clear the caller's pointer. | 19 Oct |
| CVE-2026-89523 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregistered within that window, the pending work can still run and access vif/bss data that may already be freed, or send MCU commands while the firmware is not available. Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown and suspend paths: - mt7925_mac_reset_work() (chip reset recovery) - mt7925e_unregister_device() (PCIe unbind) - mt7925_pci_suspend() (PCIe bus suspend) - mt7925_suspend() (mac80211 suspend) - mt7925u_suspend() (USB bus / runtime suspend) This ensures the work is stopped before the device state becomes invalid. | 19 Oct |
| CVE-2026-80979 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: unregister the connection before draining the rx tasklet smc_conn_free() calls smc_ism_unset_conn() only while the link group is still on its device list, and never sets conn->killed. smc_lgr_terminate_sched() unlinks the group immediately and defers killing its connections to a work item, so a connection freed in that window keeps its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the device can re-arm the receive tasklet after tasklet_kill() has returned. On the DMB-nocopy path the ghost send buffer is freed right after that drain, so the re-armed tasklet dereferences it. Unregister unconditionally and drain before the detach at both teardown sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain. Clear conn->sndbuf_desc before freeing it as well, so a reader that samples the pointer cannot get one that is already freed. | 19 Oct |
| CVE-2026-80971 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: clear the URB pointers on disconnect bcd2000_free_usb_related_resources() frees both URBs and leaves the pointers behind: usb_kill_urb(bcd2k->midi_out_urb); usb_kill_urb(bcd2k->midi_in_urb); usb_free_urb(bcd2k->midi_out_urb); usb_free_urb(bcd2k->midi_in_urb); The rawmidi device outlives that call. A substream that is still open when the device is unplugged reaches bcd2000_midi_send() from the trigger path on close. That function writes to the freed URB and then hands it to the USB core: bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE; ... ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC); usb_kill_urb() does not stop a later submission either, so a submit that races the disconnect can requeue the URB after it has been reaped. midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits it from the completion handler. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000] Write of size 4 at addr ffff00001827d388 by task bpoc/168 __asan_store4 bcd2000_midi_send [snd_bcd2000] bcd2000_midi_output_trigger [snd_bcd2000] snd_rawmidi_kernel_write1 close_substream.part.0 Freed by task 168: usb_free_urb bcd2000_disconnect [snd_bcd2000] BUG: KASAN: slab-use-after-free in usb_submit_urb Read of size 8 at addr ffff00001827d3b8 by task bpoc/168 Clear both pointers after freeing and test them on the paths that can still run. Poison the URBs before freeing them: usb_poison_urb() waits for a running completion handler and rejects any later submission, so after it returns the input path is quiesced and only the rawmidi trigger path can still reach bcd2000_midi_send(). No unpoison is needed; the URBs are freed on the next line. Discovered by XBOW, triaged by Baul Lee <[email protected]> | 19 Oct |
| CVE-2026-80928 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race. | 19 Oct |
| CVE-2026-45199 | 7.8 high | 0.00% | no CPE yet | Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory. Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. | 18 Oct |
| CVE-2026-80731 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | 16 Oct |
| CVE-2026-74668 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in TX_RING send path tpacket_snd() reads dev->hard_header_len independently for skb allocation and header construction in tpacket_fill_skb(). Concurrent netdevice reconfiguration can therefore make the reserved headroom smaller than the amount later pushed, or make copylen - hard_header_len negative. Snapshot hard_header_len once before processing ring frames and use it for the frame limit, headroom allocation, copy length, and skb construction. Pass the snapshot to tpacket_fill_skb(). The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here. | 16 Oct |
| CVE-2026-74582 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in non-ring send paths packet_snd() reads dev->hard_header_len multiple times while allocating and constructing an skb. Device reconfiguration can change this value concurrently, for example through bonding device type changes. For SOCK_RAW, packet_snd() can save a larger value in reserve and later allocate headroom using a smaller value. Moving skb->data back by reserve then places it before skb->head, and the following copy from userspace can attempt an out-of-bounds write. packet_sendmsg_spkt() has the same issue because it calculates its reservation and header offset from separate reads before dropping the RCU read lock to allocate the skb. Add LL_RESERVED_SPACE_EX() for callers that already saved a header length. Read hard_header_len once in packet_snd() and use it for allocation and construction. In packet_sendmsg_spkt(), preserve the allocation-time value through the device lookup retry. The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here. | 16 Oct |
| CVE-2026-74367 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | 16 Oct |
| CVE-2026-72419 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init() We ran into below KASAN splat, which is mostly uninteresting, beside for having nf_nat_register_fn() in the call chain as a cause for the offending access: ================================================================== BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640 Read of size 8 at addr ffff890031e54c20 by task iptables/9510 CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> […] dump_stack_lvl+0xee/0x160 ffff88004117eeb8 […] print_report+0x6e/0x640 ffff88004117eee0 […] ? __phys_addr+0x8e/0x140 ffff88004117eef0 […] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08 […] ? complete_report_info+0xec/0x1c0 ffff88004117ef20 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48 […] kasan_report+0xbc/0x140 ffff88004117ef50 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90 […] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8 […] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070 […] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080 […] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8 […] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130 […] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190 […] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8 […] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310 […] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358 […] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360 […] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488 […] ? lock_acquire+0x16f/0x320 ffff88004117f490 […] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0 […] ? __nla_parse+0x45/0x80 ffff88004117f500 […] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550 […] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618 […] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720 […] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8 […] ? gr_is_capable+0x6f/0xe0 ffff88004117f830 […] ? __nla_parse+0x45/0x80 ffff88004117f860 […] ? skb_pull+0x103/0x1a0 ffff88004117f880 […] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0 […] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8 […] ? netlink_lookup+0xe2/0x240 ffff88004117f900 […] netlink_unicast+0x74b/0xb00 ffff88004117f930 […] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980 […] ? __check_object_size+0x3e/0xaa0 ffff88004117f998 […] ? security_netlink_send+0x51/0x160 ffff88004117f9c8 […] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8 […] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8 […] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00 […] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60 […] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8 […] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8 […] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30 […] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50 […] ? lock_acquire+0x16f/0x320 ffff88004117fd20 […] ? lock_acquire+0x16f/0x320 ffff88004117fd58 […] ? find_held_lock+0x3b/0xe0 ffff88004117fd70 […] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8 […] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0 […] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98 […] do_syscall_64+0x7d/0x400 ffff88004117fec8 […] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8 </TASK> ================================================================== The out-of-bounds report, though, is a red herring as it is f ---truncated--- | 16 Oct |
| CVE-2026-72335 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | 16 Oct |
| CVE-2026-72126 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. | 16 Oct |
| CVE-2026-72123 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently firing thrtimer then dereferences the deallocated op, causing a UAF. Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not fully close the TOCTOU race and introduces latency for every CAN frame. Conversely, calling hrtimer_cancel() directly inside the RCU callback (softirq context) is fatal as hrtimer_cancel() can sleep, triggering a "scheduling while atomic" panic. Resolve this by deferring the timer cancellation and memory free to a dedicated unbound workqueue (bcm_wq). The RCU callback now queues a work item to bcm_wq, which safely cancels both timers and deallocates memory in sleepable process context. A dedicated workqueue is used to prevent system-wide WQ saturation and is cleanly flushed/destroyed on module unload to avoid rmmod page faults. Since the deferred work can now outlive the calling context by an unbounded amount, also take a reference on op->sk when it is assigned and drop it only once the deferred work has cancelled both timers, so a socket can no longer be freed out from under a still-armed timer whose callback (bcm_send_to_user()) dereferences op->sk. | 16 Oct |
| CVE-2026-1679 | 7.8 high | 0.00% | zephyrproject, zephyr | The eswifi socket offload driver copies user-provided payloads into a fixed buffer without checking available space; oversized sends overflow `eswifi->buf`, corrupting kernel memory (CWE-120). Exploit requires local code that can call the socket send API; no remote attacker can reach it directly. | 15 Oct |
| CVE-2025-68317 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: io_uring/zctx: check chained notif contexts Send zc only links ubuf_info for requests coming from the same context. There are some ambiguous syz reports, so let's check the assumption on notification completion. | 15 Oct |
| CVE-2025-40284 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT timers. Should fix the BUG: sporadically seen by BlueZ test bot (in "Mesh - Send cancel - 1" test). Log: ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0 vhci_release+0x18b/0x240 ------ | 15 Oct |
| CVE-2025-38154 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Avoid using sk_socket after free when sending The sk->sk_socket is not locked or referenced in backlog thread, and during the call to skb_send_sock(), there is a race condition with the release of sk_socket. All types of sockets(tcp/udp/unix/vsock) will be affected. Race conditions: ''' CPU0 CPU1 backlog::skb_send_sock sendmsg_unlocked sock_sendmsg sock_sendmsg_nosec close(fd): ... ops->release() -> sock_map_close() sk_socket->ops = NULL free(socket) sock->ops->sendmsg ^ panic here ''' The ref of psock become 0 after sock_map_close() executed. ''' void sock_map_close() { ... if (likely(psock)) { ... // !! here we remove psock and the ref of psock become 0 sock_map_remove_links(sk, psock) psock = sk_psock_get(sk); if (unlikely(!psock)) goto no_psock; <=== Control jumps here via goto ... cancel_delayed_work_sync(&psock->work); <=== not executed sk_psock_put(sk, psock); ... } ''' Based on the fact that we already wait for the workqueue to finish in sock_map_close() if psock is held, we simply increase the psock reference count to avoid race conditions. With this patch, if the backlog thread is running, sock_map_close() will wait for the backlog thread to complete and cancel all pending work. If no backlog running, any pending work that hasn't started by then will fail when invoked by sk_psock_get(), as the psock reference count have been zeroed, and sk_psock_drop() will cancel all jobs via cancel_delayed_work_sync(). In summary, we require synchronization to coordinate the backlog thread and close() thread. The panic I catched: ''' Workqueue: events sk_psock_backlog RIP: 0010:sock_sendmsg+0x21d/0x440 RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001 ... Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x14c/0x230 ? asm_exc_general_protection+0x26/0x30 ? sock_sendmsg+0x21d/0x440 ? sock_sendmsg+0x3e0/0x440 ? __pfx_sock_sendmsg+0x10/0x10 __skb_send_sock+0x543/0xb70 sk_psock_backlog+0x247/0xb80 ... ''' | 15 Oct |
| CVE-2025-23142 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: sctp: detect and prevent references to a freed transport in sendmsg sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]). | 15 Oct |
| CVE-2023-53629 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: fs: dlm: fix use after free in midcomms commit While working on processing dlm message in softirq context I experienced the following KASAN use-after-free warning: [ 151.760477] ================================================================== [ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347 [ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828 [ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014 [ 151.768726] Call Trace: [ 151.769277] <TASK> [ 151.769748] dump_stack_lvl+0x5b/0x86 [ 151.770556] print_report+0x180/0x4c8 [ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0 [ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.773069] kasan_report+0x93/0x1a0 [ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.774514] __asan_load4+0x7e/0xa0 [ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0 [ 151.776770] send_common+0x19f/0x1b0 [ 151.777342] ? remove_from_waiters+0x60/0x60 [ 151.778017] ? lock_downgrade+0x410/0x410 [ 151.778648] ? __this_cpu_preempt_check+0x13/0x20 [ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0 [ 151.780292] _convert_lock+0x46/0x150 [ 151.780893] convert_lock+0x7b/0xc0 [ 151.781459] dlm_lock+0x3ac/0x580 [ 151.781993] ? 0xffffffffc0540000 [ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70 [ 151.784003] ? preempt_count_sub+0xd6/0x130 [ 151.784661] ? is_module_address+0x47/0x70 [ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.786166] ? 0xffffffffc0540000 [ 151.786693] ? lockdep_init_map_type+0xc3/0x360 [ 151.787414] ? 0xffffffffc0540000 [ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture] [ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.789858] ? 0xffffffffc0540000 [ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture] [ 151.791347] ? delay_tsc+0x94/0xc0 [ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture] [ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture] [ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture] [ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture] [ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0 [ 151.797152] ? mark_held_locks+0x34/0xb0 [ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70 [ 151.798581] ? __kthread_parkme+0x79/0x110 [ 151.799246] ? trace_preempt_on+0x2a/0xf0 [ 151.799902] ? __kthread_parkme+0x79/0x110 [ 151.800579] ? preempt_count_sub+0xd6/0x130 [ 151.801271] ? __kasan_check_read+0x11/0x20 [ 151.801963] ? __kthread_parkme+0xec/0x110 [ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 151.803569] kthread+0x192/0x1d0 [ 151.804104] ? kthread_complete_and_exit+0x30/0x30 [ 151.804881] ret_from_fork+0x1f/0x30 [ 151.805480] </TASK> [ 151.806111] Allocated by task 1347: [ 151.806681] kasan_save_stack+0x26/0x50 [ 151.807308] kasan_set_track+0x25/0x30 [ 151.807920] kasan_save_alloc_info+0x1e/0x30 [ 151.808609] __kasan_slab_alloc+0x63/0x80 [ 151.809263] kmem_cache_alloc+0x1ad/0x830 [ 151.809916] dlm_allocate_mhandle+0x17/0x20 [ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260 [ 151.811344] _create_message+0x95/0x180 [ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0 [ 151.812880] send_common+0x129/0x1b0 [ 151.813467] _convert_lock+0x46/0x150 [ 151.814074] convert_lock+0x7b/0xc0 [ 151.814648] dlm_lock+0x3ac/0x580 [ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture] [ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture] [ 151.817129] lock_t ---truncated--- | 15 Oct |
| CVE-2023-53500 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xfrm: fix slab-use-after-free in decode_session6 When the xfrm device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when the xfrm device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff8881111458ef by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 xfrmi_xmit+0x173/0x1ca0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:intel_idle_hlt+0x23/0x30 Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4 RSP: 0018:ffffc90000197d78 EFLAGS: 00000246 RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5 RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50 RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter_state+0xd3/0x6f0 cpuidle_enter+0x4e/0xa0 do_idle+0x2fe/0x3c0 cpu_startup_entry+0x18/0x20 start_secondary+0x200/0x290 secondary_startup_64_no_verify+0x167/0x16b </TASK> Allocated by task 939: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 inet6_ifa_notify+0x118/0x230 __ipv6_ifa_notify+0x177/0xbe0 addrconf_dad_completed+0x133/0xe00 addrconf_dad_work+0x764/0x1390 process_one_work+0xa32/0x16f0 worker_thread+0x67d/0x10c0 kthread+0x344/0x440 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888111145800 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 239 bytes inside of freed 640-byte region [ffff888111145800, ffff888111145a80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets. | 15 Oct |
| CVE-2022-49882 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits) | 15 Oct |
| CVE-2026-46180 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put(). | 15 Oct |
| CVE-2026-43502 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path. | 15 Oct |
| CVE-2026-23372 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs. | 15 Oct |
| CVE-2026-23359 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path. | 15 Oct |
| CVE-2025-21791 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vrf: use RCU protection in l3mdev_l3_out() l3mdev_l3_out() can be called without RCU being held: raw_sendmsg() ip_push_pending_frames() ip_send_skb() ip_local_out() __ip_local_out() l3mdev_ip_out() Add rcu_read_lock() / rcu_read_unlock() pair to avoid a potential UAF. | 15 Oct |
| CVE-2025-21700 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: sched: Disallow replacing of child qdisc from one parent to another Lion Ackermann was able to create a UAF which can be abused for privilege escalation with the following script Step 1. create root qdisc tc qdisc add dev lo root handle 1:0 drr step2. a class for packet aggregation do demonstrate uaf tc class add dev lo classid 1:1 drr step3. a class for nesting tc class add dev lo classid 1:2 drr step4. a class to graft qdisc to tc class add dev lo classid 1:3 drr step5. tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024 step6. tc qdisc add dev lo parent 1:2 handle 3:0 drr step7. tc class add dev lo classid 3:1 drr step 8. tc qdisc add dev lo parent 3:1 handle 4:0 pfifo step 9. Display the class/qdisc layout tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 limit 1000p qdisc drr 3: dev lo parent 1:2 step10. trigger the bug <=== prevented by this patch tc qdisc replace dev lo parent 1:3 handle 4:0 step 11. Redisplay again the qdiscs/classes tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 1:3 root leaf 4: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p qdisc drr 3: dev lo parent 1:2 Observe that a) parent for 4:0 does not change despite the replace request. There can only be one parent. b) refcount has gone up by two for 4:0 and c) both class 1:3 and 3:1 are pointing to it. Step 12. send one packet to plug echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001)) step13. send one packet to the grafted fifo echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003)) step14. lets trigger the uaf tc class delete dev lo classid 1:3 tc class delete dev lo classid 1:1 The semantics of "replace" is for a del/add _on the same node_ and not a delete from one node(3:1) and add to another node (1:3) as in step10. While we could "fix" with a more complex approach there could be consequences to expectations so the patch takes the preventive approach of "disallow such config". Joint work with Lion Ackermann <[email protected]> | 15 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.