Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2023-4911KEVexploit ×24 | 7.8 high | 64.0% | netapp, siemens, bootstrap_os, simatic_s7-1500_cpu_1518-4_pn\/dp_mfp_firmware, simatic_s7-1500_cpu_1518f-4_pn\/dp_mfp_firmware | A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges. | 14 Oct |
| CVE-2024-6387exploit ×98 | 8.1 high | 100.0% | sonicwall, arista, sma_6200_firmware, sma_7200_firmware, eos | A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. | 15 Oct |
| CVE-2019-17498exploit | 8.1 high | 4.0% | libssh2, fedoraproject, fedora, leap | In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server. | 14 Oct |
| CVE-2026-78162exploit | 10.0 critical | 1.0% | no CPE yet | Deserialization of Untrusted Data vulnerability in Apache Camel. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. | 20 Oct |
| CVE-2026-34048exploit | 9.9 critical | 1.0% | no CPE yet | Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, terminal websocket bootstrap routes only check authentication and do not enforce terminal authorization, allowing a low-privileged team member to connect to terminal routes and execute commands on team servers. This issue is fixed in version 4.0.0-beta.471. | Sun 25 Oct |
| CVE-2026-42089exploit | 8.6 high | 0.00% | no CPE yet | Yeoman Environment provides an API to discover, create, and run generators, and to configure where and how a generator is resolved. Versions 2.9.0 through 6.0.0 install missing local generator packages from caller-supplied package names without user confirmation. In downstream consumers that pass attacker-controlled project configuration into this path, this can result in arbitrary package installation and code execution during CLI bootstrap. The vulnerable method is installLocalGenerators(), which calls repository.install() directly without prompting the user. This issue has been fixed in version 6.0.0. | Sun 25 Oct |
| CVE-2022-2068 | 7.3 high | 96.0% | openssl, debian, debian_linux, fedora | In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). | 14 Oct |
| CVE-2024-2398 | 8.6 high | 36.0% | haxx, apple, curl, macos, fedora | When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory. Further, this error condition fails silently and is therefore not easily detected by an application. | 15 Oct |
| CVE-2022-32206 | 6.5 medium | 36.0% | haxx, fedoraproject, curl, fedora, debian_linux | curl < 7.84.0 supports "chained" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable "links" in this "decompression chain" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a "malloc bomb", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. | 14 Oct |
| CVE-2025-63387 | 7.5 high | 30.0% | langgenius, dify | Dify v1.9.1 is vulnerable to Insecure Permissions. An unauthenticated attacker can directly send HTTP GET requests to the /console/api/system-features endpoint without any authentication credentials or session tokens. The endpoint fails to implement proper authorization checks, allowing anonymous access to sensitive system configuration data. NOTE: The maintainer states that the endpoint is unauthenticated by design and serves as a bootstrap mechanism required for the dashboard initialization. They also state that the description inaccurately classifies the returned data as sensitive system configuration, stating that the data is non-sensitive and required for client-side rendering. No PII, credentials, or secrets are exposed. | 13 Oct |
| CVE-2022-32207 | 9.8 critical | 12.0% | haxx, fedoraproject, curl, fedora, debian_linux | When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. | 14 Oct |
| CVE-2020-8285 | 7.5 high | 10.0% | haxx, debian, libcurl, debian_linux, fedora | curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing. | 14 Oct |
| CVE-2022-32208 | 5.9 medium | 8.0% | haxx, fedoraproject, curl, fedora, debian_linux | When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. | 14 Oct |
| CVE-2022-23308 | 7.5 high | 5.0% | xmlsoft, fedoraproject, libxml2, fedora, debian_linux | valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes. | 14 Oct |
| CVE-2020-8286 | 7.5 high | 5.0% | haxx, fedoraproject, libcurl, fedora, debian_linux | curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. | 14 Oct |
| CVE-2022-27776 | 6.5 medium | 4.0% | haxx, fedoraproject, curl, fedora, debian_linux | A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. | 14 Oct |
| CVE-2022-35252 | 3.7 low | 4.0% | haxx, netapp, curl, clustered_data_ontap, element_software | When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a"sister site" to deny service to all siblings. | 14 Oct |
| CVE-2020-8284 | 3.7 low | 4.0% | haxx, fedoraproject, curl, fedora, debian_linux | A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions. | 14 Oct |
| CVE-2023-28531 | 9.8 critical | 3.0% | openbsd, netapp, openssh, brocade_fabric_operating_system, hci_bootstrap_os | ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9. | 14 Oct |
| CVE-2022-22576 | 8.1 high | 3.0% | haxx, debian, curl, debian_linux, clustered_data_ontap | An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). | 14 Oct |
| CVE-2022-45061 | 7.5 high | 3.0% | python, fedoraproject, fedora, active_iq_unified_manager | An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16. | 14 Oct |
| CVE-2022-27781 | 7.5 high | 3.0% | haxx, debian, curl, debian_linux, hci_bootstrap_os | libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation. | 14 Oct |
| CVE-2022-27780 | 7.5 high | 3.0% | haxx, netapp, curl, hci_bootstrap_os, clustered_data_ontap | The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more. | 14 Oct |
| CVE-2022-27775 | 7.5 high | 3.0% | haxx, debian, curl, debian_linux, hci_bootstrap_os | An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. | 14 Oct |
| CVE-2021-38202 | 7.5 high | 3.0% | linux, netapp, linux_kernel, hci_bootstrap_os, hci_management_node | fs/nfsd/trace.h in the Linux kernel before 5.13.4 might allow remote attackers to cause a denial of service (out-of-bounds read in strlen) by sending NFS traffic when the trace event framework is being used for nfsd. | 14 Oct |
| CVE-2022-27779 | 5.3 medium | 3.0% | haxx, netapp, curl, hci_bootstrap_os, clustered_data_ontap | libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl's "cookie engine" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain. | 14 Oct |
| CVE-2021-4209 | 6.5 medium | 2.0% | gnu, redhat, gnutls, enterprise_linux, active_iq_unified_manager | A NULL pointer dereference flaw was found in GnuTLS. As Nettle's hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances. | 14 Oct |
| CVE-2024-2379 | 6.3 medium | 2.0% | haxx, apple, curl, macos, active_iq_unified_manager | libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems. | 15 Oct |
| CVE-2022-27774 | 5.7 medium | 2.0% | haxx, debian, curl, debian_linux, hci_bootstrap_os | An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers. | 14 Oct |
| CVE-2024-2004 | 3.5 low | 2.0% | haxx, fedoraproject, curl, fedora, macos | When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. | 15 Oct |
| CVE-2024-11053 | 3.4 low | 2.0% | haxx, netapp, curl, ontap, ontap_select_deploy_administration_utility | When asked to both use a `.netrc` file for credentials and to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has an entry that matches the redirect target hostname but the entry either omits just the password or omits both login and password. | 15 Oct |
| CVE-2026-34047 | 9.9 critical | 1.0% | no CPE yet | Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, terminal WebSocket bootstrap routes did not enforce the expected authorization middleware, allowing an authenticated user to access terminal functionality for resources outside the authorized scope and potentially execute commands. This issue is fixed in version 4.0.0-beta.471. | Sun 25 Oct |
| CVE-2026-53709 | 9.8 critical | 1.0% | no CPE yet | MCP Context Forge is an MCP gateway and administrative platform. Prior to 1.0.2, mcpgateway/config.py and .env.example ship a known JWT_SECRET_KEY, while verify_jwt_token() accepts HS256 tokens signed with that key and get_current_user() creates a platform administrator when the token subject matches PLATFORM_ADMIN_EMAIL and REQUIRE_USER_IN_DB is false. A remote unauthenticated attacker can therefore mint accepted administrator tokens without a database account. While the vulnerable signing key remains configured and the platform-admin bootstrap remains enabled, forged access survives password rotation, account deletion, and session revocation, allowing administrative disclosure, modification, and service disruption. This issue is fixed in version 1.0.2. | 16 Oct |
| CVE-2026-110002 | 9.8 critical | 1.0% | no CPE yet | The Snazzy Social Media Feed plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 2.5 via the (file scope) function. This is due to missing WordPress bootstrap, authentication, capability, and nonce checks in the standalone save-to-cache.php script, combined with insufficient sanitization of the pluginURL parameter before it is written to a web-executable PHP file. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The save-to-cache.php script is directly reachable without loading WordPress; FILTER_SANITIZE_URL — the only filter applied to the pluginURL value — preserves the characters required to craft a valid PHP payload, which is then written verbatim into cached-content/cached-feed.php and immediately executable via a single GET request. | 15 Oct |
| CVE-2026-62252 | 9.8 critical | 1.0% | no CPE yet | Homer is open source telecom observability software. Prior to version 11.0.283, on every fresh Homer deployment using internal authentication, the bootstrap process automatically creates an `admin` account with the password `sipcapture` (stored as a legacy SHA-256 hex hash). There is no first-login forced-change mechanism. Any attacker who reaches the login endpoint immediately gains full administrative access. Version 11.0.283 patches the issue. | 8 Oct |
| CVE-2026-69264 | 9.4 critical | 1.0% | flowiseai, flowise | Prior to 3.1.3, Flowise CSVAgent interpolates an attacker-controlled segment of the csvFile data URI directly into a Python source-code template that is then executed by Pyodide. Because Pyodide is loaded with the default js bridge to globalThis, which on Node.js exposes eval and dynamic import, the attacker can break out of the Python string literal, hand a JavaScript string to js.eval, dynamically import Node built-in modules such as fs and child_process, and execute arbitrary file I/O or OS commands as the Flowise process. The two validator paths around this code, validatePythonCodeForDataFrame and validateCustomReadCSVFunction, are never applied to the bootstrap template. A workspace user with chatflows:create or agentflows/chatflows update permission can plant a CSV Agent node with a crafted csvFile; once the chatflow is exposed via POST /api/v1/prediction/:id, any unauthenticated request triggers host remote code execution. This issue is fixed in version 3.1.3. | 24 Oct |
| CVE-2026-63087 | 9.3 critical | 1.0% | no CPE yet | Grafana OnCall through 1.16.11 contains an unauthenticated access vulnerability that allows remote attackers to obtain a valid PluginAuthToken by sending a POST request to the internal plugin install endpoint using hardcoded default stack_id and org_id values present in the public source tree. Attackers can leverage the acquired token to authenticate against all internal API endpoints, create arbitrary Admin users via the user-context header bootstrap path, revoke the legitimate plugin token, and redirect OnCall-to-Grafana API calls to an attacker-controlled host by overwriting the organization's grafana_url and api_token. | 24 Oct |
| CVE-2026-103090 | 8.8 high | 1.0% | no CPE yet | Missing Authentication for Critical Function (CWE-306) and Insufficiently Protected Credentials (CWE-522) in the control plane enrollment status handler (HandleEnrollStatus at GET /enroll/status in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow an unauthenticated remote attacker to retrieve an approved bootstrap-enrolled peer's signed Biscuit identity token by supplying a peer_id obtainable from the unauthenticated GET /info endpoint. A related flaw in POST /enroll allowed any bootstrap-token holder to re-fetch another peer's credential. An attacker can replay the disclosed Biscuit token as a bearer credential on /policies to read mesh authorization policies and on /routers/lease to overwrite advertised router multiaddrs. Users should upgrade to version 0.1.0-alpha.9 or later, which requires cryptographic proof of possession of the enrollment private key on credential-releasing endpoints, enforces rate limiting, and validates router lease addresses. | Fri 30 Oct |
| CVE-2026-53977 | 8.7 high | 1.0% | no CPE yet | OpenChamber 1.11.7 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to terminate the server process by sending a POST request to the /api/system/shutdown endpoint, which is registered before the authentication middleware in the Express route handler chain. Attackers can exploit the route registration order in bootstrap-runtime.js to reach the shutdown handler before auth middleware executes, causing denial of service to all active AI coding sessions and locking out legitimate remote users regardless of whether UI_PASSWORD is configured. | 24 Oct |
| CVE-2026-14637 | 7.8 high | 1.0% | no CPE yet | A security vulnerability has been detected in kirilkirkov Ecommerce-CodeIgniter-Bootstrap up to 13fd582aaf49aeab7438acc0fc3eb973a1f5e6a7. The affected element is the function getCartItems in the library application/libraries/ShoppingCart.php. The manipulation of the argument shopping_cart leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The identifier of the patch is 49b20f53de2b7ec34e920b11c863f1491d911a04. It is recommended to apply a patch to fix this issue. | Sun 25 Oct |
| CVE-2026-59978 | 7.5 high | 1.0% | adminneo-org, adminneo | AdminNeo is a full-featured database management tool written in PHP. From 4.6.2 until 5.5.0, the unauthenticated `?script=version` endpoint accepts POST data without origin, CSRF or parameter-type validation. A `version[]` parameter becomes a PHP array that `bootstrap.inc.php` serializes into the shared `adminneo.version` cache. On later page loads, `design.inc.php` passes that cached value to `cookie()` and `rawurlencode()`, causing a `TypeError` rather than encoding a version string. A remote attacker can make the instance return HTTP 500 to all users for the cache's twenty-four-hour lifetime or until the poisoned cache is removed. Exploitation requires the web server to be able to write that shared cache; making it unwritable is an interim workaround. The issue retains the underlying type-validation defect reported previously in Adminer despite changes to AdminNeo's version-checking flow. This issue is fixed in version 5.5.0. | Fri 30 Oct |
| CVE-2025-0665 | 7.0 high | 1.0% | haxx, netapp, curl, bootstrap_os, h300s_firmware | libcurl would wrongly close the same eventfd file descriptor twice when taking down a connection channel after having completed a threaded name resolve. | 15 Oct |
| CVE-2024-8096 | 6.5 medium | 1.0% | haxx, debian, curl, debian_linux, active_iq_unified_manager | When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate. | 15 Oct |
| CVE-2024-2466 | 6.5 medium | 1.0% | haxx, apple, curl, macos, h700s_firmware | libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS. libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc). | 15 Oct |
| CVE-2021-38199 | 6.5 medium | 1.0% | linux, netapp, linux_kernel, hci_bootstrap_os, hci_management_node | fs/nfs/nfs4client.c in the Linux kernel before 5.13.4 has incorrect connection-setup ordering, which allows operators of remote NFSv4 servers to cause a denial of service (hanging of mounts) by arranging for those servers to be unreachable during trunking detection. | 8 Oct |
| CVE-2026-14635 | 5.5 medium | 1.0% | no CPE yet | A security flaw has been discovered in kirilkirkov Ecommerce-CodeIgniter-Bootstrap up to 222ff31c06687b1c6d0e1ab63953f82c3674c52b. This issue affects some unknown processing of the file application/modules/vendor/controllers/AddProduct.php of the component Vendor Multi-Image Endpoint. Performing a manipulation of the argument folder results in path traversal. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The patch is named 2a9497ff11f36e573ad99e1c357ff0e6ded49745. Applying a patch is the recommended action to fix this issue. | Sun 25 Oct |
| CVE-2022-30115 | 4.3 medium | 1.0% | haxx, netapp, curl, hci_bootstrap_os, clustered_data_ontap | Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL. | 14 Oct |
| CVE-2025-0167 | 3.4 low | 1.0% | haxx, netapp, curl, h700s_firmware, h615c_firmware | When asked to use a `.netrc` file for credentials **and** to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has a `default` entry that omits both login and password. A rare circumstance. | 15 Oct |
| CVE-2021-36086 | 3.3 low | 1.0% | debian, netapp, debian_linux, active_iq_unified_manager, bootstrap_os | The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list). | 14 Oct |
| CVE-2026-63377 | 9.8 critical | 0.00% | fctr-id, okta-ai-agent | TAKO AI Agent for Okta is a local-first AI agent that helps Okta administrators query tenant data using natural language. Prior to 3.0.1-beta, `POST /api/auth/setup` in `src/api/routers/auth.py` allows an unauthenticated network attacker to create the first administrator account before the legitimate owner completes initial setup. The `initial_setup` function checks only the `is_setup` completion flag and requires no authentication, one-time bootstrap token, or network restriction. The default `docker-compose.yml` publishes port 8001 on all interfaces, the `Dockerfile` starts the listener on 0.0.0.0, and `src/api/main.py` mounts the authentication router without a global authentication guard. The endpoint invokes `create_auth_user` with `UserRole.ADMIN` and `set_auth_cookie`, issuing a valid `fctr_session` JWT cookie. Localhost-only CORS rules do not restrict non-browser HTTP clients, and the setup operation does not require access to a real Okta tenant. The attacker becomes the sole administrator and prevents legitimate first-run setup, can read Okta-synced user data, API tokens, chat history, and application configuration, modify users and Okta integration credentials, and lock out administrators or disable the service. Already completed setup is rejected. This issue is fixed in version 3.0.1-beta. | Fri 30 Oct |
50 of 104 · Next
Download these 104 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.