Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-7473KEVexploit | 6.9 medium | 1.0% | arista, eos | On affected platforms running Arista EOS where a tunnel decapsulation configuration—such as VXLAN (Virtual Extensible LAN), decap-groups, or a GRE (Generic Routing Encapsulation) tunnel interface—is present, the switch will incorrectly decapsulate and forward other unexpected tunneled packet with a destination IP matching its configured decapsulation IP. This occurs because the switch does not verify the tunnel protocol type, potentially leading to the unexpected processing of non-configured tunnel traffic. This issue has been reported as being exploited in the wild. | Sun 25 Oct |
| CVE-2024-6387exploit ×98 | 8.1 high | 100.0% | sonicwall, arista, sma_6200_firmware, sma_7200_firmware, eos | A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. | 15 Oct |
| CVE-2026-113390 | 8.6 high | 2.0% | no CPE yet | A flaw has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this issue is the function sub_182B0 of the file /cgi-bin/mainfunction.cgi of the component CGI Interface. This manipulation of the argument usefile/usescript/option causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | Thu 22 Oct |
| CVE-2026-113389 | 8.6 high | 2.0% | no CPE yet | A vulnerability was detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this vulnerability is the function set_table of the file /cgi-bin/mainfunction.cgi of the component CGI Process. The manipulation of the argument sectiontype results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-113391 | 8.6 high | 2.0% | no CPE yet | A vulnerability has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function uploadlangs of the file /cgi-bin/mainfunction.cgi of the component Upload Endpoint. Such manipulation leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.7 is able to mitigate this issue. It is recommended to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-113396 | 2.1 low | 2.0% | no CPE yet | A weakness has been identified in DrayTek Vigor2960 1.5.1.6 Revision 8218. The impacted element is the function rename_table of the file /cgi-bin/mainfunction.cgi of the component Rename Table Handler. This manipulation of the argument newtable causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.5.1.7 is sufficient to resolve this issue. It is suggested to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-55082 | 8.7 high | 1.0% | no CPE yet | DHIS2 is a flexible information system for data capture, management, validation, analytics and visualization. DHIS2 SQL View data endpoints allowed authenticated users with SQL View access to provide crafted filter values that were interpolated into generated SQL. An authenticated user with access to SQL View execution could manipulate SQL generated for SQL View filters and potentially access data outside the intended SQL View result set. This is distinct from CVE-2026-55084, which tracks the related SQL View filter column-name injection. Known affected release lines for this advisory: DHIS2 2.37, 2.38, and 2.39 before the 2026-06-09 EOS security updates. Patched by the 2026-06-09 EOS security updates for 2.37, 2.38, and 2.39. The same value-slot hardening was already present on later supported branches through DHIS2-20174 / PR #22253. | Sat 24 Oct |
| CVE-2026-75090 | 2.1 low | 1.0% | no CPE yet | A vulnerability was detected in EricLBuehler Mistral.rs up to 0.8.22. Affected by this issue is the function convert_gguf_to_hf_tokenizer of the file mistralrs-core/src/gguf/gguf_tokenizer.rs of the component GGUF Tokenizer. The manipulation of the argument eos_token_id/bos_token_id/unknown_token_id results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 0.8.23 can resolve this issue. The patch is identified as cd5297e2ea5cb27c790bdcf2f3c2f1064a81d55e. Upgrading the affected component is recommended. | Thu 22 Oct |
| CVE-2026-113397 | 2.1 low | 1.0% | no CPE yet | A security vulnerability has been detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function ruequest_certificate of the file /cgi-bin/mainfunction.cgi of the component IPsec Handler. Such manipulation of the argument option leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 1.5.1.7 mitigates this issue. Upgrading the affected component is recommended. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-55084 | 8.8 high | 0.00% | no CPE yet | DHIS2 is a flexible information system for data capture, management, validation, analytics and visualization. A SQL injection vulnerability was identified in the SqlView API endpoint of the DHIS2 application in the `filter` parameter used by the `/api/sqlViews/{viewId}/data.json` endpoint. An authenticated user with access to a SqlView can inject arbitrary SQL queries inside the `filter` parameter by abusing an expression executed by PostgreSQL and its output is reflected inside the application error message. This behavior enables attackers to extract arbitrary database content using error-based SQL injection. Affected versions include: 2.37, 2.38, 2.39, 2.40.x before 2.40.11.1/2.40.12, 2.41.x before 2.41.8.2, 2.42.x before 2.42.5.1, 2.43.0 before 2.43.0.1, 2.44 development branch before PR #24162 Patched versions include: 2.37-EOS (2026-06-09), 2.38-EOS (2026-06-09), 2.39-EOS (2026-06-09), 2.40.11.1, 2.40.12, 2.41.8.2, 2.42.5.1, 2.43.0.1, 2.44 development branch after PR #24162 | Sat 24 Oct |
| CVE-2026-2379 | 8.2 high | 0.00% | no CPE yet | On affected platforms with hardware IPSec support running Arista EOS with certain IPsec features enabled, EOS may exhibit unexpected behavior in specific cases. Physical interface flaps and certain agent restarts can cause IPsec tunnel re-establishment with existing Security Associations, resulting in sequence number mismatches between tunnel endpoints potentially causing unstable communication. | Mon 26 Oct |
| CVE-2025-11454 | 6.5 medium | 0.00% | no CPE yet | The Specific Content For Mobile – Customize the mobile version without redirections plugin for WordPress is vulnerable to SQL Injection via the eos_scfm_duplicate_post_as_draft() function in all versions up to, and including, 0.5.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with COntributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 18 Oct |
| CVE-2026-40333 | 6.1 medium | 0.00% | no CPE yet | libgphoto2 is a camera access and control library. In versions up to and including 2.5.33, two functions in camlibs/ptp2/ptp-pack.c accept a data pointer but no length parameter, performing unbounded reads. Their callers in ptp_unpack_EOS_events() have xsize available but never pass it, leaving both functions unable to validate reads against the actual buffer boundary. Commit 1817ecead20c2aafa7549dac9619fe38f47b2f53 patches the issue. | Mon 26 Oct |
| CVE-2025-3456 | 3.8 low | 0.00% | no CPE yet | On affected platforms running Arista EOS, the global common encryption key configuration may be logged in clear text, in local or remote accounting logs. Knowledge of both the encryption key and protocol specific encrypted secrets from the device running-config could then be used to obtain protocol specific passwords in cases where symmetric passwords are required between devices with neighbor protocol relationships. | 12 Oct |
| CVE-2026-40341 | 3.5 low | 0.00% | no CPE yet | libgphoto2 is a camera access and control library. In versions up to and including 2.5.33, an out of bound read in ptp_unpack_EOS_FocusInfoEx could be used to crash libgphoto2 when processing input from untrusted USB devices. Commit c385b34af260595dfbb5f9329526be5158985987 contains a patch. No known workarounds are available. | Mon 26 Oct |
| CVE-2026-113394 | 2.1 low | 0.00% | no CPE yet | A vulnerability was identified in DrayTek Vigor2960 1.5.1.6 Revision 8218. Impacted is the function setSWMProfile of the file /cgi-bin/mainfunction.cgi. The manipulation of the argument setSWMProfile leads to path traversal. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | Thu 22 Oct |
| CVE-2026-113392 | 2.1 low | 0.00% | no CPE yet | A vulnerability was found in DrayTek Vigor2960 1.5.1.6 Revision 8218. This vulnerability affects unknown code of the file /cgi-bin/mainfunction.cgi of the component Apmupload. Performing a manipulation of the argument action results in path traversal. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 1.5.1.7 is able to resolve this issue. Upgrading the affected component is advised. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-113393 | 2.1 low | 0.00% | no CPE yet | A vulnerability was determined in DrayTek Vigor2960 1.5.1.6 Revision 8218. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi of the component commonupload. Executing a manipulation of the argument upload_path/upload_name can lead to unrestricted upload. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. Upgrading to version 1.5.1.7 is capable of addressing this issue. It is advisable to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-113395 | 2.1 low | 0.00% | no CPE yet | A security flaw has been discovered in DrayTek Vigor2960 1.5.1.6 Revision 8218. The affected element is the function cgiEscape of the file /cgi-bin/mainfunction.cgi of the component swmconfigupload. The manipulation of the argument multipart results in path traversal. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.5.1.7 is sufficient to fix this issue. The affected component should be upgraded. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2026-8084 | 1.9 low | 0.00% | osgeo, gdal | A vulnerability was determined in OSGeo gdal up to 3.13.0dev-4. This vulnerability affects the function memmove of the file frmts/hdf4/hdf-eos/SWapi.c of the component HDF-EOS Grid File Handler. This manipulation causes out-of-bounds read. The attack is restricted to local execution. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.13.0RC1 is able to resolve this issue. Patch name: a791f70f8eaec540974ec989ca6fb00266b7646c. Upgrading the affected component is advised. | Mon 26 Oct |
| CVE-2026-8087 | 1.9 low | 0.00% | osgeo, gdal | A security flaw has been discovered in OSGeo gdal up to 3.13.0dev-4. Impacted is the function GDnentries of the file frmts/hdf4/hdf-eos/GDapi.c. Performing a manipulation of the argument DataFieldName results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 3.13.0RC1 is recommended to address this issue. The patch is named 184f77dbcc74118c062c05e464c88161d3c37b9b. You should upgrade the affected component. | Mon 26 Oct |
| CVE-2026-8088 | 1.9 low | 0.00% | osgeo, gdal | A weakness has been identified in OSGeo gdal up to 3.13.0dev-4. The affected element is the function GDfieldinfo of the file frmts/hdf4/hdf-eos/GDapi.c. Executing a manipulation can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. Upgrading to version 3.13.0RC1 is sufficient to fix this issue. This patch is called a791f70f8eaec540974ec989ca6fb00266b7646c. The affected component should be upgraded. | Mon 26 Oct |
| CVE-2026-8086 | 1.9 low | 0.00% | osgeo, gdal | A vulnerability was identified in OSGeo gdal up to 3.13.0dev-4. This issue affects the function SWnentries of the file frmts/hdf4/hdf-eos/SWapi.c. Such manipulation of the argument DimensionName leads to heap-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. Upgrading to version 3.12.4RC1 is capable of addressing this issue. The name of the patch is 9491e794f1757f08063ea2f7a274ad2994afa636. It is advisable to upgrade the affected component. | Sun 25 Oct |
| CVE-2026-89867 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Decoder instances sharing a VPU also share one v4l2_m2m job slot, released when the running context calls v4l2_m2m_job_finish(). While draining, device_run() defers job_finish() once EOS is sent (sent_eos), expecting a later finish_decode() (from a DEC_PIC completion IRQ) to release the slot. But the m2m core checks job_ready() only when a job is queued, not when it is dispatched. A job queued while draining can run after finish_decode() has already moved the instance to STOP and sent EOS. device_run() then runs in STOP, issues no DEC_PIC, yet still skips job_finish() - so no IRQ, no finish_decode(), and the shared slot is leaked, stalling every instance. With several v4l2h264dec instances in parallel, GStreamer hangs at EOS. Track whether the run actually queued a DEC_PIC (cmd_issued) and defer job_finish() only then. Otherwise finish the job immediately | 19 Oct |
| CVE-2026-89866 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Resume device before setting EOS flag Setting the EOS flag talks to the firmware via send_firmware_command(), which accesses VPU registers. Both the STREAMOFF path (wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path (wave5_vpu_dec_stop()) can run while the device is runtime suspended, so those register accesses hit powered-down hardware and the SoC raises an asynchronous SError, panicking the kernel: SError Interrupt on CPU3, code 0x00000000bf000000 -- SError send_firmware_command+0x2c/0x160 [wave5] wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5] wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5] wave5_vpu_dec_job_abort+0x44/0xa0 [wave5] v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem] v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem] Resume the device with pm_runtime_resume_and_get() around the EOS firmware command and release it with pm_runtime_put_autosuspend(), matching the runtime PM handling already done in wave5_vpu_dec_device_run(). | 19 Oct |
25 of 25
Download these 25 as CSV · subscribe to this list.
EPSS scores: 2026-10-27. NVD cursor: 2026-10-28 22:21. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.