Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2024-6387exploit ×98 | 8.1 high | 100.0% | sonicwall, arista, sma_6200_firmware, sma_7200_firmware, eos | A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. | 15 Oct |
| CVE-2025-34218 | 10.0 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) expose internal Docker containers through the gw Docker instance. The gateway publishes a /meta endpoint which lists every micro‑service container together with version information. These containers are reachable directly over HTTP/HTTPS without any access‑control list (ACL), authentication or rate‑limiting. Consequently, any attacker on the LAN or the Internet can enumerate all internal services and their versions, interact with the exposed APIs of each microservice as an unauthenticated user, or issue malicious requests that may lead to information disclosure, privilege escalation within the container, or denial‑of‑service of the entire appliance. The root cause is the absence of authentication and network‑level restrictions on the API‑gateway’s proxy to internal Docker containers, effectively turning the internal service mesh into a public attack surface. This vulnerability has been identified by the vendor as: V-2024-030 — Exposed Internal Docker Instance (LAN). | 18 Oct |
| CVE-2026-64037 | 9.8 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism. | 19 Oct |
| CVE-2026-105216 | 9.1 critical | 0.00% | micro, go-micro | go-micro before 6.0.0 contains an improper certificate validation vulnerability that allows network attackers to impersonate services because the shared TLS helper sets InsecureSkipVerify to true by default. Man-in-the-middle attackers can present any certificate to intercept or modify gRPC transport, HTTP and RabbitMQ broker, and Consul or etcd registry traffic, including authentication tokens and credentials. | Tue 27 Oct |
| CVE-2026-42550 | 8.8 high | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, SimplePdo::insert(), SimplePdo::update(), and SimplePdo::delete() build SQL statements by concatenating the $table argument and the keys of the $data array directly into the query, with no identifier quoting and no validation. When an application forwards user-controlled data shapes to these helpers — a common and documented pattern, e.g. $db->insert('users', $request->data->getData()) — an attacker can inject arbitrary SQL by crafting malicious array keys. This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-30802 | 8.8 high | 0.00% | rti, connext_micro | Out-of-bounds Read vulnerability in RTI Connext Micro (Core Libraries) allows Overread Buffers. This issue affects Connext Micro: from 4.0.0 before 4.3.0, from 2.4.5 before 2.4.*. | Mon 26 Oct |
| CVE-2026-30803 | 8.8 high | 0.00% | rti, connext_micro | Integer Underflow (Wrap or Wraparound) vulnerability in RTI Connext Micro (Core Libraries) allows Overread Buffers. This issue affects Connext Micro: from 4.0.0 before 4.3.0. | Mon 26 Oct |
| CVE-2026-64313 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: ecc - Fix carry overflow in vli multiplication The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition. | Sat 24 Oct |
| CVE-2026-89811 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add TLB flush after MES queue eviction/suspension MES (Micro Engine Scheduler) does not perform heavy-weight TLB invalidation after unmapping queues, unlike HWS which does this automatically. This causes a race condition where in-flight DMA descriptors can access memory that has been unmapped, leading to page faults and GPU queue hangs during SVM page migration. The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU compute queue hangs with packets submitted but never consumed. Add kfd_flush_tlb() calls after MES queue removal in two locations: - evict_process_queues_cpsch(): after all queues removed during eviction - suspend_queues(): after debug/criu queue suspension (with mem_fence barrier) This ensures all in-flight memory accesses from unmapped queues are flushed before memory is freed or migrated. (cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) | 21 Oct |
| CVE-2026-63807 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level When recovering hugepages in the shadow MMU, verify that the base gfn of the shadow page is actually contained within the target memslot, *before* querying the max mapping level given the shadow page's gfn. Failure to pre-check the validity of the gfn can lead to an out-of-bounds access to the slot's lpage_info (which typically manifests as a host #PF because the lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its PTEs) that extends "below" the bounds of a memslot. When faulting in memory for a guest, and the size of the guest mapping is greater than KVM's (current) max mapping, then KVM will create a "direct" shadow page (direct in that there are no gPTEs to shadow, and so the target gfn is a direct calculation given the base gfn of the shadow page). The hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB mappings when dirty logging generates the guest > host mapping size case. When the 4KiB restriction is lifted, then KVM can replace the shadow page with a hugepage. But if KVM originally used a smaller mapping than the guest because the range of memory covered by the guest hugepage exceeds the bounds of a memslot, then KVM will link a direct shadow page with a gfn that is outside the bounds of the memslot being used to fault in memory. The rmap entry added for the leaf mapping is correct and within bounds, but the gfn of the leaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: <TASK> kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf </TASK> Don't bother pre-checking the bounds of the potential hugepage, i.e. don't check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also within the memslot, as the checks performed by kvm_mmu_max_mapping_level() are a superset of the basic bounds checks. I.e. pre-checking the full range would be a dubious micro-optimization. | 19 Oct |
| CVE-2026-41146 | 8.7 high | 0.00% | no CPE yet | facil.io is a C micro-framework for web applications. Prior to commit 5128747363055201d3ecf0e29bf0a961703c9fa0, `fio_json_parse` can enter an infinite loop when it encounters a nested JSON value starting with `i` or `I`. The process spins in user space and pegs one CPU core at ~100% instead of returning a parse error. Because `iodine` vendors the same parser code, the issue also affects `iodine` when it parses attacker-controlled JSON. The smallest reproducer I found is `[i`. The quoted-value form that originally exposed the issue, `[""i`, reaches the same bug because the parser tolerates missing commas and then treats the trailing `i` as the start of another value. Commit 5128747363055201d3ecf0e29bf0a961703c9fa0 fixes the issue. | Mon 26 Oct |
| CVE-2026-42548 | 8.6 high | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, Flight::jsonp() concatenates the ?jsonp= query parameter directly into an application/javascript response body without validating that the value is a legal JavaScript identifier. An attacker can inject arbitrary JavaScript that executes in the response origin, enabling reflected cross-site scripting. This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-80994 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix flow mask use-after-free on flow deletion The commit in the Fixes tag below made so flow->mask free is scheduled via RCU right after it is removed from the flow table. The pointer stays in the flow structure and it can be accessible while in the same RCU critical section. This is done to avoid requiring ovs_mutex for the ovs_flow_free(). However, while removing the flow during processing of CMD_DEL, we do not take RCU read lock before the removal, and ovs_flow_cmd_fill_info() uses the flow->mask pointer afterwards. The RCU read lock is taken, but it's already late at that point. The comment on that line acknowledges that the lock is cosmetic and doesn't serve a real purpose. This leads to use-after-free if the RCU grace period passes between removal and the filling. It is a short race window, but it is there and can lead to a real crash in case memory allocation for the info takes a bit longer: BUG: KASAN: slab-use-after-free in __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250 Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487 Call Trace: <TASK> __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250 ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930 ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467 ... netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556 </TASK> Allocated by task 9487: mask_alloc net/openvswitch/flow_table.c:967 flow_mask_insert net/openvswitch/flow_table.c:1012 ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084 ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086 ... netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556 Freed by task 9485: rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978 rcu_do_batch kernel/rcu/tree.c:2645 rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622 ... instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info() to avoid this race. This also helps with cleaning up the forced cast and the cosmetic RCU read lock. Before the commit in the Fixes tag the order did not matter as long as the flow object itself was not freed. A wider RCU critical section could be another option, but we have a GFP_KERNEL allocation in the way. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. | 19 Oct |
| CVE-2026-74465 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | 16 Oct |
| CVE-2026-42551 | 7.5 high | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, Request::getMethod() unconditionally honors the X-HTTP-Method-Override header and the $_REQUEST['_method'] parameter on any HTTP verb (including safe verbs such as GET), with no opt-in and no whitelist of permitted target methods. A GET request can silently become a DELETE or PUT, enabling CSRF escalation against destructive endpoints, bypass of middleware gated on unsafe verbs, and cache poisoning between CDN and origin. This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-42552 | 7.5 high | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, the default error handler Engine::_error() writes the full exception message, exception code, and stack trace (including absolute filesystem paths) directly into the HTTP 500 response, with no debug gating. Production deployments leak internal paths, any secret interpolated into an exception message, and full module structure — giving attackers primitives for chaining other weaknesses (LFI, path traversal). This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-89561 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv() ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL check when reading idev->cnf.rpl_seg_enabled. When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with dev->ip6_ptr already NULL. Reproduced by flooding the receiving interface with ping6 traffic while flapping its MTU between 1500 and 1200: BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070 Read of size 4 at addr 00000000000006b4 by task ping6/394 CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full) Call Trace: <IRQ> kasan_report+0xc6/0x100 ipv6_rpl_srh_rcv+0xb3/0x1070 ip6_protocol_deliver_rcu+0x759/0x9a0 ip6_input_finish+0xa8/0x1b0 ip6_input+0xe1/0x490 ipv6_rcv+0x33d/0x460 __netif_receive_skb_one_core+0xd6/0x130 process_backlog+0x2cc/0xa00 __napi_poll.constprop.0+0x56/0x270 net_rx_action+0x327/0x730 handle_softirqs+0x11e/0x630 do_softirq+0xb3/0xf0 </IRQ> Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from ipv6_rthdr_rcv(), which already has an idev lookup. Fix the NULL dereference on the RPL path by checking idev in ipv6_rthdr_rcv(), before it calls either function. The callees take idev as an argument and no longer call __in6_dev_get(), so the packet is now dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. | 21 Oct |
| CVE-2025-64713 | 7.4 high | 0.00% | bytecodealliance, webassembly_micro_runtime | WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to version 2.4.4, an out-of-bounds array access issue exists in WAMR's fast interpreter mode during WASM bytecode loading. When frame_ref_bottom and frame_offset_bottom arrays are at capacity and a GET_GLOBAL(I32) opcode is encountered, frame_ref_bottom is expanded but frame_offset_bottom may not be. If this is immediately followed by an if opcode that triggers preserve_local_for_block, the function traverses arrays using stack_cell_num as the upper bound, causing out-of-bounds access to frame_offset_bottom since it wasn't expanded to match the increased stack_cell_num. This issue has been patched in version 2.4.4. | 18 Oct |
| CVE-2026-33800 | 7.1 high | 0.00% | juniper, junos | An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage. This issue only affects MX series FPCs up to and including MPC9, and LC2101/2103 and LC480. It does not affect MPC10/11, LC4800/9600, and MX304. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. | Sun 25 Oct |
| CVE-2025-12351 | 6.8 medium | 0.00% | no CPE yet | Honeywell S35 Series Cameras contains an authorization bypass Vulnerability through User controller key. An attacker could potentially exploit this vulnerability, leading to Privilege Escalation to admin privileged functionalities . Honeywell also recommends updating to the most recent version of this product, service or offering (S35 Pinhole/Kit Camera to version 2025.08.28, S35 AI Fisheye & Dual Sensor/Micro Dome/Full Color Eyeball & Bullet Camera to version 2025.08.22, S35 Thermal Camera to version 2025.08.26). | 18 Oct |
| CVE-2026-114129 | 6.2 medium | 0.00% | no CPE yet | stream-json is a micro-library of stream components for processing JSON and JSONC with a minimal memory footprint. From 2.0.0 until 3.7.0, FlexAssembler compiles string and regular-expression path filters into matchers that join the full key stack on every container start. Because the key stack grows with unbounded object or array nesting, a document nested to depth D causes D joins whose cost grows with the current depth, resulting in quadratic CPU consumption on the single-threaded event loop. The join occurs before the rule match decision, so the attacker does not need to know the target schema. Consumers using only function filters or no rules are not affected. A crafted nested document can stall all concurrent work in a process that feeds it to an affected FlexAssembler. This issue is fixed in 3.7.0, which adds a default maximum depth. | 21 h ago |
| CVE-2026-48157 | 6.1 medium | 0.00% | no CPE yet | Slim is a PHP micro framework that enables users to write simple web applications and APIs. In versions 4.4.0 through 4.15, if an application uses HttpException::setTitle() and/or setDescription() to include untrusted/request-derived data in the error title or description (e.g. "No products found matching '{$query}'."), an attacker could inject arbitrary HTML/JavaScript that executes in the victim's browser when they encounter an HTML error page generated by Slim. The vulnerability is present even with displayErrorDetails = false as the unescaped title and description are rendered on this error path. Built-in exceptions (HttpNotFoundException, HttpBadRequestException, etc.) ship plain-text defaults, so a vanilla Slim app with no user code is not exploitable. Only applications that feed untrusted data into setTitle() and/or setDescription() are affected. The issue has been fixed in 4.15.2. If developers are unable to immediately update their applications, they can work around this issue by avoiding passing untrusted/request-derived data into HttpException::setTitle() and setDescription() and using static, plain-text error copy instead. They should also register a custom error renderer (an ErrorRendererInterface implementation, or a subclass of HtmlErrorRenderer that escapes the title and description) for the HTML media type. | Sun 25 Oct |
| CVE-2025-39698 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this. | 19 Oct |
| CVE-2025-64704 | 5.5 medium | 0.00% | bytecodealliance, webassembly_micro_runtime | WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to version 2.4.4, WAMR is susceptible to a segmentation fault in v128.store instruction. This issue has been patched in version 2.4.4. | 18 Oct |
| CVE-2022-49092 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix route with nexthop object delete warning FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f2455 ---truncated--- | 15 Oct |
| CVE-2026-34069 | 5.3 medium | 0.00% | nimiq, nimiq_proof-of-stake | nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. In versions 1.2.2 and below, an unauthenticated p2p peer can cause the RequestMacroChain message handler task to panic. Sending a RequestMacroChain message where the first locator hash on the victim’s main chain is a micro block hash (not a macro block hash) causes said panic. The RequestMacroChain::handle handler selects the locator based only on "is on main chain", then calls get_macro_blocks() and panics via .unwrap() when the selected hash is not a macro block (BlockchainError::BlockIsNotMacro). This issue has been fixed in version 1.3.0. | Mon 26 Oct |
| CVE-2026-40337 | 5.1 medium | 0.00% | no CPE yet | The Sentry kernel is a high security level micro-kernel implementation made for high security embedded systems. A given task with one of the DEV or IO capability is able to interact with another task's IRQ line through the __sys_int_* syscall familly. Prior to version 0.4.7, this can lead to DoS and covert-channels between this task and the outer world. A patch is available in version 0.4.7. As a workaround, reduce tasks that have the DEV and IO capability to a single one. | Mon 26 Oct |
| CVE-2026-42549 | 4.4 medium | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, the make:controller CLI command calls mkdir(..., recursive: true) on a path built from the user-supplied controller name, before Nette's class-name validation runs. The class-file write is correctly rejected by Nette when the name contains /, but the recursive directory creation side effect is already committed — including directories located outside the project root through ../ traversal. This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-98660 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup The sampling frequency tables store each frequency as an integer part and a fractional part in micro units. num_sampling_freq_avail is initialized to the number of flattened integer elements because read_avail() returns the table as a flat array. bmp280_write_sampling_frequency(), however, indexes the same table as a two-dimensional array and uses num_sampling_freq_avail as the number of rows. Convert the flattened element count back to the number of rows before iterating over the table. | 21 Oct |
| CVE-2026-90264 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:264! Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0 Call Trace: <TASK> cow_file_range+0x744/0x12a0 fallback_to_cow+0x5ea/0xa00 run_delalloc_nocow+0x110c/0x17a0 btrfs_run_delalloc_range+0xbe4/0x1c20 writepage_delalloc+0x104d/0x1ba0 btrfs_writepages+0x1667/0x28b0 do_writepages+0x338/0x560 filemap_fdatawrite_range+0x1f2/0x300 btrfs_fdatawrite_range+0x54/0xf0 btrfs_direct_write+0x6a0/0xc30 btrfs_do_write_iter+0x329/0x790 do_iter_readv_writev+0x624/0x8d0 vfs_writev+0x34c/0x990 __se_sys_pwritev2+0x17a/0x2a0 do_syscall_64+0x174/0x580 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- [CAUSE] Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback for append direct writes"), if the direct IO finished short, we will revert the isize back to the original one, so that append writes can be respected during the buffered fallback. Normally we rely on lock_and_cleanup_extent_if_need() function during buffered writeback to wait for any existing ordered extents. But that ordered extent waiting only happens if the start_pos is inside the isize. Since we have reverted the isize during failed direct IO, we will not wait for any ordered extents. This means we can have a race where the direct IO OE is still in the tree, finished but not yet removed, then we're inserting the OE for the buffered write, causing the above crash. [FIX] Make the OE wait to be unconditional, to handle the reverted isize situation. And since lock_and_cleanup_extent_if_need() now either lock the extents or return -EAGAIN, also remove the branches that handles no-extent-locked cases, and rename it to remove the "_if_need" suffix. The following micro benchmark shows the runtime difference for btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload, all values are the average runtime in nano seconds. function runtime | before | after -----------------------------------+-------------+--------------- lock_and_cleanup_extent_if_need() | 58.2 | 183.0 btrfs_buffered_write() | 2115.6 | 2973.3 The overall runtime of btrfs_buffered_write() is still pretty tiny (still less than 3 micro seconds), I'd say the extra cost is still acceptable. An alternative to fix this problem is to wait ordered extents during iomap_end() where the isize revert is done. But that solution will break nowait requirement, as if a nowait direct IO finished short, we have to wait for the OEs unconditionally or the next append buffered IO can still hit the same problem. So here we have to move the wait cost to buffered write, but at least the code is slightly more streamline. | 21 Oct |
| CVE-2026-74685 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Clamp negative current limits When a negative value is passed to ltc4282_write_curr(), the signed long val is cast directly to u64: drivers/hwmon/ltc4282.c:ltc4282_write_curr() { /* need to pass it in millivolt */ u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO); ... } This cast converts negative inputs into large positive values. The subsequent division result overflows the u32 in variable, truncating to a pseudo-random positive value. When this is passed to ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead of zero. Clamp val to 0 and to the maximum supported upper limit before the cast and assign the result to a 64-bit temporary variable before the division to avoid the underflow and an also possible overflow. | 14 Oct |
31 of 31
Download these 31 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.