Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-57851exploit | 8.5 high | 0.00% | no CPE yet | MSI Feature Manager contains a local privilege escalation vulnerability in the KernCoreLib64.sys kernel driver that allows any locally logged-on user to perform arbitrary physical memory read/write and unrestricted I/O port operations by accessing exposed IOCTL handlers without administrator privileges. Attackers can exploit the accessible device object through IOCTL handlers to manipulate kernel objects, tamper with kernel-mode callbacks, bypass Protected Process Light protections, and disable security software. | Sun 25 Oct |
| CVE-2026-71983 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the wps.cgi interface that allows remote attackers to execute arbitrary commands by injecting malicious input through the pin2g, pin5g, or pin6g parameters. Attackers can exploit these unsanitized parameters to execute arbitrary commands on the affected device and obtain root privileges. | 24 Oct |
| CVE-2026-71984 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the urlfilter function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit the urlfilter function to inject malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71985 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the accesscontrol function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the accesscontrol function to execute malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71986 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the dmz function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the dmz function to execute malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71987 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the alg function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the alg function to execute malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71988 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the portFw function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the alg function to execute malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71989 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the porTrigger function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the alg function to execute malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71990 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the TelnetSSH function used for SSH configuration that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the SSH configuration interface to inject malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71991 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the TelnetSSH function used for Telnet configuration that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the Telnet configuration interface to inject malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71992 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the macfilter function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit the macfilter function to inject malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-71993 | 9.3 critical | 2.0% | no CPE yet | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the openvpn function that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit the macfilter function to inject malicious commands and obtain root privileges on the underlying system. | 24 Oct |
| CVE-2026-89848 | 8.1 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early. | 19 Oct |
| CVE-2026-37453 | 7.5 high | 1.0% | msi, center | Insecure Permissions vulnerability in MSI NBFoundation Service v.2.0.2506.1201 allows a remote attacker to obtain sensitive information via the MSI_SERVICE_2 pipe | Sun 25 Oct |
| CVE-2026-37452 | 7.5 high | 1.0% | no CPE yet | Insecure Permissions vulnerability in MSI NBFoundation Service v.2.0.2506.1201 allows a remote attacker to obtain sensitive information via the MSIAPService.exe component | Sun 25 Oct |
| CVE-2023-30585 | 7.5 high | 1.0% | nodejs, node.js | A vulnerability has been identified in the Node.js (.msi version) installation process, specifically affecting Windows users who install Node.js using the .msi installer. This vulnerability emerges during the repair operation, where the "msiexec.exe" process, running under the NT AUTHORITY\SYSTEM context, attempts to read the %USERPROFILE% environment variable from the current user's registry. The issue arises when the path referenced by the %USERPROFILE% environment variable does not exist. In such cases, the "msiexec.exe" process attempts to create the specified path in an unsafe manner, potentially leading to the creation of arbitrary folders in arbitrary locations. The severity of this vulnerability is heightened by the fact that the %USERPROFILE% environment variable in the Windows registry can be modified by standard (or "non-privileged") users. Consequently, unprivileged actors, including malicious entities or trojans, can manipulate the environment variable key to deceive the privileged "msiexec.exe" process. This manipulation can result in the creation of folders in unintended and potentially malicious locations. It is important to note that this vulnerability is specific to Windows users who install Node.js using the .msi installer. Users who opt for other installation methods are not affected by this particular issue. | 8 Oct |
| CVE-2026-26191 | 6.0 medium | 1.0% | fleetdm, fleet | Fleet is open source device management software. Prior to version 4.81.0, a vulnerability in Fleet's software installer pipeline could allow a crafted software package to execute arbitrary commands as root (macOS/Linux) or SYSTEM (Windows) on managed endpoints when an uninstall is triggered. When a software package (.pkg, .deb, .rpm, .exe, or .msi) is uploaded to Fleet, metadata is extracted from the package binary and used to generate uninstall scripts. In affected versions, this metadata is not properly sanitized before being included in the generated scripts. A specially crafted package containing malicious values in its metadata fields could result in unintended command execution when the uninstall script runs on managed endpoints. Version 4.81.0 contains a patch. If an immediate upgrade is not possible, administrators should avoid uploading software packages obtained from untrusted or unverified sources. Additionally, administrators can manually inspect and edit auto-generated uninstall scripts before deployment. | Mon 26 Oct |
| CVE-2026-64438 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. | 24 Oct |
| CVE-2026-89907 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate MSI data before routing it to EIOINTC pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as the irq number. The MSI data comes from userspace, that either via a KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked against EIOINTC_IRQS. eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the 256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value >= 256 reads and writes memory past the end of those arrays, i.e. any process holding a VM fd can corrupt kernel memory beyond the allocation of loongarch_eiointc. Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC path is unaffected as it decodes the vector from the address and masks it. | 19 Oct |
| CVE-2026-89777 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: clear vdev->msi_perm after freeing it on init failure vfio_msi_cap_len() lazily allocates the per-device MSI permission table: vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT); if (!vdev->msi_perm) return -ENOMEM; ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags); if (ret) { kfree(vdev->msi_perm); return ret; /* vdev->msi_perm left dangling */ } When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the error path frees vdev->msi_perm but leaves the freed pointer stored in it. vdev->msi_perm is not re-zeroed later because struct vfio_pci_core_device is per-device and persists across open/close cycles, and the vfio_config_init() error path returns without calling vfio_config_free(). So the dangling pointer outlives the failed open. That leads to two use-after-frees on the same device: 1. Reuse. The next vfio_config_init() sees the stale pointer at "if (vdev->msi_perm) return len;" and reuses the freed object. MSI config accesses in vfio_pci_config_rw_single() then dereference and call the freed perm->readfn / perm->writefn function pointers. 2. Double free. A later vfio_config_free() runs free_perm_bits() and kfree() on the already-freed object. Fix it by NULLing vdev->msi_perm after the kfree(), matching the NULL-after-free discipline already used in free_perm_bits() and vfio_config_free(). BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961) Read of size 8 at addr ffff88800fcc88d0 by task exploit/143 Call Trace: ... kasan_report (mm/kasan/report.c:595) vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961) vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986) vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599) vfs_read (fs/read_write.c:572) __x64_sys_pread64 (fs/read_write.c:764) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Followed on device close by a double free of the same object: Oops: general protection fault, probably for non-canonical address 0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI RIP: 0010:kfree (mm/slub.c:6711) Call Trace: vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861) vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685) vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777) vfio_df_close (drivers/vfio/vfio_main.c:602) vfio_device_fops_release (drivers/vfio/vfio_main.c:648) __fput (fs/file_table.c:512) __x64_sys_close (fs/open.c:1496) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Kernel panic - not syncing: Fatal exception | 19 Oct |
| CVE-2025-11535 | 8.8 high | 0.00% | no CPE yet | MongoDB Connector for BI installation via MSI on Windows leaves ACLs unset on custom install directories allows Privilege Escalation.This issue affects MongoDB Connector for BI: from 2.0.0 through 2.14.24. | 8 Oct |
| CVE-2025-10941 | 8.5 high | 0.00% | no CPE yet | A vulnerability was determined in Topaz SERVCore Teller 2.14.0-RC2/2.14.1. Affected by this issue is some unknown functionality of the file SERVCoreTeller_2.0.40D.msi of the component Installer. Executing manipulation can lead to permission issues. The attack needs to be launched locally. You should upgrade the affected component. The vendor explains, that "this vulnerability was detected at the beginning of 2025, it was remediated because the latest published version of the installer no longer uses "nssm," which is responsible for this vulnerability". | 11 Oct |
| CVE-2026-107707 | 8.5 high | 0.00% | no CPE yet | Intego Antivirus for Windows through 3.0.0.1 contains a link following vulnerability in its optimization module that allows local unprivileged users to delete arbitrary folders as SYSTEM. Attackers can replace a scanned duplicate file's directory with a junction to C:\Config.msi and abuse Windows Installer rollback to execute code as SYSTEM. | 9 Oct |
| CVE-2025-9067 | 8.5 high | 0.00% | rockwellautomation, factorytalk_linx | A security issue exists within the x86 Microsoft Installer File (MSI), installed with FTLinx. Authenticated attackers with valid Windows user credentials can initiate a repair and hijack the resulting console window. This allows the launching of a command prompt running with SYSTEM-level privileges, allowing full access to all files, processes, and system resources. | 8 Oct |
| CVE-2025-9068 | 8.5 high | 0.00% | rockwellautomation, factorytalk_linx | A security issue exists within the Rockwell Automation Driver Package x64 Microsoft Installer File (MSI) repair functionality, installed with FTLinx. Authenticated attackers with valid Windows Users credentials can initiate a repair and hijack the resulting console window for vbpinstall.exe. This allows the launching of a command prompt running with SYSTEM-level privileges, allowing full access to all files, processes, and system resources. | 8 Oct |
| CVE-2026-89856 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs). | 19 Oct |
| CVE-2026-90332 | 8.2 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush cached MSI write before unmapping the iATU The MSI-X path already flushes any posted MSI-X write before tearing down its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry") to make sure the write reaches the Root Complex before the outbound window that translates it disappears. The MSI path has the same problem but no equivalent flush. When the Endpoint driver caches an MSI target address and later observes that the Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing iATU entry and reprograms it for the new address. Between the last MSI writel() and the unmap there may still be a posted write sitting in the fabric, and unmapping the iATU entry can drop or misroute that write. Fix this by reading back from the mapped MSI window before the unmap. The readback drains any posted MSI writes through the same iATU entry that mapped them, which is the same logic the MSI-X path uses. [mani: commit log] | 19 Oct |
| CVE-2026-39853 | 7.8 high | 0.00% | osslsigncode_project, osslsigncode | osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.12, A stack buffer overflow vulnerability exists in osslsigncode in several signature verification paths. During verification of a PKCS#7 signature, the code copies the digest value from a parsed SpcIndirectDataContent structure into a fixed-size stack buffer (mdbuf[EVP_MAX_MD_SIZE], 64 bytes) without validating that the source length fits within the destination buffer. This pattern is present in the verification handlers for PE, MSI, CAB, and script files. An attacker can craft a malicious signed file with an oversized digest field in SpcIndirectDataContent. When a user verifies such a file with osslsigncode verify, the unbounded memcpy can overflow the stack buffer and corrupt adjacent stack state. This vulnerability is fixed in 2.12. | Mon 26 Oct |
| CVE-2026-6102 | 7.8 high | 0.00% | no CPE yet | MSI Center NTIOLib_X64 Origin Validation Error Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of MSI Center. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the NTIOLib_X64.sys driver. The issue results from insufficient validation of the origin of commands. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-28935. | 24 Oct |
| CVE-2026-23361 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log] | 21 Oct |
| CVE-2026-74317 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | 21 Oct |
| CVE-2026-23013 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to ioq_vector. If request_irq() fails part-way, the rollback loop calls free_irq() with dev_id set to 'oct', which does not match the original dev_id and may leave the irqaction registered. This can keep IRQ handlers alive while ioq_vector is later freed during unwind/teardown, leading to a use-after-free or crash when an interrupt fires. Fix the error path to free IRQs with the same ioq_vector dev_id used during request_irq(). | 19 Oct |
| CVE-2026-90244 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is always freshly allocated and privately owned (iommu_group_alloc_default_domain()), VFIO type1's legacy container merges any newly attached group into an existing domain whenever their iommu_ops and cache-coherency enforcement match. iommu_dma_get_msi_page() only asserts the caller's own group mutex is held (iommu_group_mutex_assert()). On an IOMMU that publishes IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned through the legacy container can have their guest drivers probe and allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands on a different device fd and group mutex, but both devices' domains are the same merged domain, so both can enter iommu_dma_get_msi_page() concurrently and corrupt msi_page_list. commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a generic operation") dropped the prior msi_prepare_lock on the reasoning that "each iommu_domain is unique to a group," which holds for default domains but not this VFIO type1 case. Restore the static lock, since it's only guarding a corner case and will likely never be contended. iommufd avoids the equivalent problem by having its own callers (iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever reaching the shared list. VFIO type1 can't mirror that since it dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. | 19 Oct |
| CVE-2026-90007 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Use rollback index when freeing MSI-X vectors pm8001_request_msix() unwinds previously registered handlers with free_irq() when request_irq() fails. The rollback loop uses the failing index i for every iteration instead of the already registered vector index j. That passes the wrong IRQ/dev_id pair to free_irq() and leaves the earlier handlers installed. Use j for both pci_irq_vector() and the matching irq_vector entry in the rollback loop. | 19 Oct |
| CVE-2025-37885 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed. | 15 Oct |
| CVE-2026-37454 | 7.5 high | 0.00% | msi, center | Insecure Permissions vulnerability in MSI NBFoundation Service v.2.0.2506.1201 allows a remote attacker to obtain sensitive information via the 3DES-ECB encryption | Sun 25 Oct |
| CVE-2026-97536 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work() dereferences the qpair (vha, rsp) and takes qpair->qp_lock. During teardown, qla2xxx_delete_qpair() deletes the response queue, which calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and the qpair. free_irq() waits for running hardirq handlers but does not cancel work already placed on ha->wq. A still-pending q_work then runs qla_do_work() against the freed qpair and response queue, causing a use-after-free. This is especially likely during full adapter teardown, where destroy_workqueue(ha->wq) forces pending work to run after the queue pairs have been freed. Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que() after free_irq() has released the interrupt (so no new work can be queued) and before the response queue and qpair memory are freed (so the flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq to match the INIT_WORK() condition and avoid operating on an uninitialized work_struct. | 21 Oct |
| CVE-2024-43824 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init() Instead of getting the epc_features from pci_epc_get_features() API, use the cached pci_epf_test::epc_features value to avoid the NULL check. Since the NULL check is already performed in pci_epf_test_bind(), having one more check in pci_epf_test_core_init() is redundant and it is not possible to hit the NULL pointer dereference. Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier" flag"), 'epc_features' got dereferenced without the NULL check, leading to the following false positive Smatch warning: drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747) Thus, remove the redundant NULL check and also use the epc_features:: {msix_capable/msi_capable} flags directly to avoid local variables. [kwilczynski: commit log] | 21 Oct |
| CVE-2025-39674 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix ESI null pointer dereference ESI/MSI is a performance optimization feature that provides dedicated interrupts per MCQ hardware queue. This is optional feature and UFS MCQ should work with and without ESI feature. Commit e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse") brings a regression in ESI (Enhanced System Interrupt) configuration that causes a null pointer dereference when Platform MSI allocation fails. The issue occurs in when platform_device_msi_init_and_alloc_irqs() in ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses __free() macro for automatic cleanup free MSI resources that were never successfully allocated. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 (P) platform_device_msi_free_irqs_all+0x1c/0x40 ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom] ufshcd_config_mcq+0x28/0x104 ufshcd_init+0xa3c/0xf40 ufshcd_pltfrm_init+0x504/0x7d4 ufs_qcom_probe+0x20/0x58 [ufs_qcom] Fix by restructuring the ESI configuration to try MSI allocation first, before any other resource allocation and instead use explicit cleanup instead of __free() macro to avoid cleanup of unallocated resources. Tested on SM8750 platform with MCQ enabled, both with and without Platform ESI support. | 19 Oct |
| CVE-2026-23198 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated--- | 19 Oct |
| CVE-2025-71232 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] <TASK> [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] </TASK> [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] <TASK> [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash. | 19 Oct |
| CVE-2026-4869 | 5.4 medium | 0.00% | no CPE yet | A potential privilege escalation issue was identified in InstallShield version 2025 R2 and earlier when running compressed Basic MSI setup with Prerequisites from an insecure location. If a local administrator launches a compressed Setup.exe with Prerequisites from an unsecured location, the Prerequisite installers also might load from an unsecured location, potentially leading to privilege escalation. | 16 Oct |
| CVE-2026-104024 | 4.6 medium | 0.00% | no CPE yet | Incomplete List of Disallowed Inputs (CWE-184) in the dangerous-extension confirmation of the archive object viewer (peach.pas, grid_obj_open) in PeaZip 10.5.0 through 11.2.0 on Windows allows an attacker who convinces a victim to open an entry of a crafted archive to execute a program, or an arbitrary command, with no confirmation dialog. The prompt (Do you want to run this file?) is gated by SECEXTCONST, a hard-coded list of seven extensions (exe cmd msi bat ps1 vbs reg); the check is an exact string comparison of the entry extension against that list, so it answers only whether the extension is one of the seven and never whether the shell will execute the file. Shell-executable and scripting-host types that Windows runs through ShellExecuteW are absent from the list, among them .url and .lnk. An archived Windows Internet Shortcut (.url) whose URL line is attacker-controlled is launched with no prompt, while the byte-identical content in an entry named .bat does raise the warning in the same session. A .lnk entry raises the ceiling from launching a program to running a command line, because a Windows shortcut carries arguments: a proof-of-concept shortcut targeting cmd.exe with an attacker-chosen command line executed with no prompt. The shortcut target is not confined to the local disk; the shell also resolved an attacker-named UNC path (fetching a remote payload was only attempted, not demonstrated). No privilege escalation; everything runs as the user who opened the archive. | 16 Oct |
| CVE-2024-50135 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix race condition between reset and nvme_dev_disable() nvme_dev_disable() modifies the dev->online_queues field, therefore nvme_pci_update_nr_queues() should avoid racing against it, otherwise we could end up passing invalid values to blk_mq_update_nr_hw_queues(). WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347 pci_irq_get_affinity+0x187/0x210 Workqueue: nvme-reset-wq nvme_reset_work [nvme] RIP: 0010:pci_irq_get_affinity+0x187/0x210 Call Trace: <TASK> ? blk_mq_pci_map_queues+0x87/0x3c0 ? pci_irq_get_affinity+0x187/0x210 blk_mq_pci_map_queues+0x87/0x3c0 nvme_pci_map_queues+0x189/0x460 [nvme] blk_mq_update_nr_hw_queues+0x2a/0x40 nvme_reset_work+0x1be/0x2a0 [nvme] Fix the bug by locking the shutdown_lock mutex before using dev->online_queues. Give up if nvme_dev_disable() is running or if it has been executed already. | Fri 30 Oct |
| CVE-2026-98877 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4. | Mon 26 Oct |
| CVE-2025-40076 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | 19 Oct |
| CVE-2026-98426 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix IRQ leak using wrong index in MSI-X error path mwifiex_pcie_request_irq() registers each MSI-X vector with a per-index dev_id (&card->msix_ctx[i]). On a request_irq() failure the cleanup loop "for (j = 0; j < i; j++)" frees msix_entries[j].vector but passes the failed index's &card->msix_ctx[i] as the dev_id. free_irq() matches on (irq, dev_id), so it fails to find the action registered with &card->msix_ctx[j]: the already-requested IRQ j is not freed (leaked) and free_irq() warns about freeing a non-existent IRQ. Use &card->msix_ctx[j]. | 19 Oct |
| CVE-2026-93246 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix out-of-bounds read setting MSI-X irq affinity rvu_register_interrupts() walks every MSI-X vector and uses strstr() to match "Mbox" or "FLR" in irq_name before pinning those interrupts to CPU 0. irq_name is a per-vector NAME_SIZE buffer, but not every slot is populated before this loop runs. strstr() keeps scanning until it finds a NUL terminator, so an uninitialized slot can trigger a KASAN slab-out-of-bounds read at boot when debug options are enabled. Use strnstr() with NAME_SIZE to bound the search within each vector's name buffer. | 19 Oct |
| CVE-2026-90082 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count(). | 19 Oct |
| CVE-2026-89455 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix use-after-free of event IRQs during teardown plda_pcie_irq_domain_deinit() removes pcie->event_domain via irq_domain_remove(), but the per-event IRQs mapped from that domain are requested with devm_request_irq() in plda_init_interrupts(). The actual free_irq() for a devm-managed IRQ is deferred by devres until after the calling probe()/remove() function returns. This means irq_domain_remove() can free the domain's internal data before the deferred free_irq() for IRQs still mapped into it has run. When devres later processes that deferred cleanup, it can end up dereferencing the already-freed domain. Free each event IRQ explicitly with devm_free_irq() before removing the domain. This triggers the free immediately and removes the IRQ from the devres tracking list, so devres will not attempt to free it a second time later. Also dispose of the event, INTx, and MSI IRQ mappings with irq_dispose_mapping() before their owning domains are removed. Finally, guard the calls to irq_set_chained_handler_and_data() for pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when those fields hold a valid (>0) IRQ number. This is a pre-existing issue, flagged by automated review during work on an earlier, unrelated patch to this driver. Build-tested and boot-tested on StarFive VisionFive v1.2A board | 19 Oct |
50 of 51 · Next
Download these 51 as CSV · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.