Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-72565 | 9.8 critical | 1.0% | no CPE yet | A SQL injection vulnerability in Tencent APIJSON through 8.1.8 allows unauthenticated remote attackers to bypass per-table access control and read arbitrary database tables via the Map-form @having operator. | Sat 24 Oct |
| CVE-2026-111675 | 9.1 critical | 1.0% | no CPE yet | Course-tencent-cloud through 2.0.1 contains an improper restriction of authentication attempts vulnerability that allows unauthenticated attackers to brute force 6-digit SMS/email verification codes, which are never invalidated or attempt-limited. Attackers who know a victim's phone or email can trigger a code and rotate source IPs against the password reset and verify login endpoints to take over accounts. | 19 Oct |
| CVE-2025-13706 | 7.8 high | 1.0% | no CPE yet | Tencent PatrickStar merge_checkpoint Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent PatrickStar. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the merge_checkpoint endpoint. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27182. | 19 Oct |
| CVE-2025-13707 | 7.8 high | 1.0% | no CPE yet | Tencent HunyuanDiT model_resume Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent HunyuanDiT. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the model_resume function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27183. | 19 Oct |
| CVE-2025-13708 | 7.8 high | 1.0% | no CPE yet | Tencent NeuralNLP-NeuralClassifier _load_checkpoint Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent NeuralNLP-NeuralClassifier. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the _load_checkpoint function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27184. | 19 Oct |
| CVE-2025-13709 | 7.8 high | 1.0% | tencent, tface | Tencent TFace restore_checkpoint Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent TFace. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the restore_checkpoint function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27185. | 19 Oct |
| CVE-2025-13710 | 7.8 high | 1.0% | no CPE yet | Tencent HunyuanVideo load_vae Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent HunyuanVideo. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the load_vae function.The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27186. | 19 Oct |
| CVE-2025-13711 | 7.8 high | 1.0% | tencent, tface | Tencent TFace eval Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent TFace. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the eval endpoint. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27187. | 19 Oct |
| CVE-2025-13712 | 7.8 high | 1.0% | no CPE yet | Tencent HunyuanDiT merge Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent HunyuanDiT. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the merge endpoint. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27190. | 19 Oct |
| CVE-2025-13713 | 7.8 high | 1.0% | no CPE yet | Tencent Hunyuan3D-1 load_pretrained Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent Hunyuan3D-1. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the load_pretrained function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27191. | 19 Oct |
| CVE-2025-13714 | 7.8 high | 1.0% | no CPE yet | Tencent MedicalNet generate_model Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent MedicalNet. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the generate_model function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27192. | 19 Oct |
| CVE-2025-13716 | 7.8 high | 1.0% | no CPE yet | Tencent MimicMotion create_pipeline Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent MimicMotion. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the create_pipeline function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27208. | 19 Oct |
| CVE-2025-13715 | 7.8 high | 0.00% | no CPE yet | Tencent FaceDetection-DSFD resnet Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent FaceDetection-DSFD. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the resnet endpoint. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27197. | 19 Oct |
| CVE-2026-110123 | 7.1 high | 0.00% | no CPE yet | Makunet maku-boot 4.3.0 through 5.0.0 contains a missing authorization vulnerability that allows authenticated users to read mail and SMS configurations by calling /sys/mail/config/list and /sys/sms/config/list without the required authority checks. Attackers can retrieve unmasked SMTP passwords and Aliyun, Tencent Cloud, Qiniu or Huawei Cloud access keys, and abuse /sys/mail/config/send to send mail to arbitrary recipients. | 16 Oct |
| CVE-2026-107830 | 6.9 medium | 0.00% | no CPE yet | Jivejdon from commit e0306088 through commit ee67a65e lacks rate limiting on the unauthenticated /account/smsVRAction endpoint handled by SmsQQAction, allowing unlimited SMS sending. Attackers can load newAccount.jsp to set session attributes, then repeatedly call the endpoint to harass arbitrary phone numbers and exhaust the operator's Tencent Cloud SMS balance. | 13 Oct |
| CVE-2026-15515 | 6.4 medium | 0.00% | no CPE yet | A security vulnerability has been detected in Tencent PC Manager 18.1.30242.301. This issue affects some unknown processing in the library qmudisk64.sys of the component QMUDisk Driver. The manipulation leads to uncontrolled search path. The attack must be carried out locally. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Sat 24 Oct |
| CVE-2026-116620 | 5.5 medium | 0.00% | no CPE yet | A security vulnerability has been detected in Tencent RapidJSON up to 1.1.0. This issue affects the function GenericStringStream<UTF8<char>>::Take in the library include/rapidjson/stream.h of the component Regex Parser. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. | Tue 27 Oct |
| CVE-2026-98123 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration sctp_verify_asconf() walks ASCONF-ACK parameters with sctp_walk_params(), which advances by SCTP_PAD4(length), while the consumer sctp_get_asconf_response() iterates the same parameters advancing by the raw length, without padding. A single odd-length parameter desynchronises the two walks and makes the consumer interpret attacker-controlled bytes at a misaligned offset. When those bytes yield a length of zero, the while loop over asconf_ack_len makes no progress, spinning forever in softirq context, and the watchdog reports a soft lockup. All reads stay within the received skb, so the lockup is a pure remote denial of service. A remote peer can trigger it with a crafted ASCONF-ACK on an ADD-IP enabled association with an outstanding ASCONF (RFC 5061 section 4.1.2 requires the chunk to be authenticated, but the predefined empty key id 0 allows the peer to compute the same association HMAC from publicly exchanged parameters, so the gate does not help). The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs no length check, letting a parameter without a complete error header reach the consumer, which reads errhdr.cause past the end of the parameter, an out-of-bounds read. Reject SCTP_PARAM_ERR_CAUSE parameters shorter than sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the verifier, and advance the consumer iterator with the same padding rule as the verifier to keep the two walks in lockstep. The verifier change guarantees a complete error header in every ERR_CAUSE parameter the consumer can see, so the consumer's asconf_ack_len check is dropped and it returns err_param->cause directly. The consumer padding fix is still required because odd lengths remain valid for SCTP_PARAM_ERR_CAUSE per RFC 5061. The issue was found by ZeroHive, a vulnerability hunting agent at Tencent Yunding Lab. | 22 Oct |
| CVE-2025-11046 | 5.5 medium | 0.00% | tencent, weknora | A security flaw has been discovered in Tencent WeKnora 0.1.0. This impacts the function testEmbeddingModel of the file /api/v1/initialization/embedding/test. The manipulation of the argument baseUrl results in server-side request forgery. The attack can be launched remotely. The exploit has been released to the public and may be exploited. It is advisable to upgrade the affected component. The vendor responds: "We have confirmed that the issue mentioned in the report does not exist in the latest releases". | 9 Oct |
| CVE-2026-31924 | 5.3 medium | 0.00% | apache, apisix | Cleartext Transmission of Sensitive Information vulnerability in Apache APISIX. tencent-cloud-cls log export uses plaintext HTTP This issue affects Apache APISIX: from 2.99.0 through 3.15.0. Users are recommended to upgrade to version 3.16.0, which fixes the issue. | Mon 26 Oct |
| CVE-2026-112073 | 2.1 low | 0.00% | no CPE yet | A vulnerability was identified in Tencent ncnn up to 44b02dabdcf97499281a4692ebd65bad73dcf8b6. Affected by this vulnerability is the function matmul_transb of the file src/layer/matmul.cpp of the component MatMul. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | 22 Oct |
| CVE-2026-112074 | 2.1 low | 0.00% | no CPE yet | A security flaw has been discovered in Tencent ncnn up to 44b02dabdcf97499281a4692ebd65bad73dcf8b6. Affected by this issue is the function ncnn::yuv420sp2rgb of the file src/mat_pixel.cpp of the component Conversion API. The manipulation results in integer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | 19 Oct |
| CVE-2026-8786 | 2.1 low | 0.00% | tencent, weknora | A vulnerability has been found in Tencent WeKnora up to 0.3.6. Affected by this issue is the function getKnowledgeBaseForInitialization of the file internal/handler/initialization.go of the component Config API Endpoint. The manipulation of the argument kbId leads to authorization bypass. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 14 Oct |
| CVE-2026-108821 | 2.1 low | 0.00% | no CPE yet | A security vulnerability has been detected in Tencent WeKnora up to 0.8.1. Impacted is the function validateSubquery of the file internal/utils/inject.go of the component SQL Validator. The manipulation leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.8.2 is recommended to address this issue. The identifier of the patch is d7ccd5ba517cc3968e6d5000a2ab0f4b51ef1dda. It is recommended to upgrade the affected component. | 13 Oct |
| CVE-2026-98371 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | 19 Oct |
| CVE-2026-98076 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and fprobe events) are created in traceprobe_define_arg_fields() by handing the probe_arg name/type strings to trace_define_field(), which only stores the pointers without copying. Those strings are owned by the trace_probe and are freed when that probe is removed. An event can have several probes attached. The field list is defined only once, by the first probe that registers the event, but it is kept alive by any surviving sibling probe. Deleting just that first probe by symbol - # primary A: fields are defined from A's args echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events # append B: shares A's event call echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events # delete only A (matched by symbol), B survives echo '-:kprobes/ev vfs_read' >> kprobe_events frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()), but trace_probe_unlink() keeps the trace_probe_event because the probe list is not empty. The event call stays registered via B while its fields now reference freed memory. Any field lookup then reads it, e.g. echo 'a1 == 1' > events/kprobes/ev/filter BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0 Call Trace: strcmp trace_find_event_field parse_pred process_preds create_filter apply_event_filter event_filter_write field->name references parg->name (kstrdup'd, freed with the probe) and, for array arguments, field->type references parg->fmt (kmalloc'd, freed with the probe) - the scalar type otherwise points at the static fmttype rodata, which is safe. Have traceprobe_define_arg_fields() duplicate the name and type strings and anchor the copies on the trace_probe_event, which embeds the event call and outlives every individual probe; trace_probe_event_free() releases them. The reproducer above triggers reliably; the field lookup and the delete both run under event_mutex, so this is a dangling reference after removal rather than a race. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | 19 Oct |
| CVE-2026-74694 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length ncsi_send_cmd_nl() takes the number of bytes to copy from the attacker-controlled ncsi_pkt_hdr.length field of the in-band packet header, while the source buffer is the NCSI_ATTR_DATA netlink attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr). The two length sources are never cross-checked: only nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced. With hdr->length set larger than the attribute payload (up to 65535 against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies past the end of the netlink attribute buffer with unsafe_memcpy(), leaking up to ~64KB of kernel heap memory into the transmitted NCSI command packet. The destination skb is sized by the declared payload, so the write side does not overflow - this is a pure OOB read / information leak, reachable with CAP_NET_ADMIN on systems with a registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where NET_NCSI=y is standard). Reject commands whose declared payload extends past the end of the data attribute. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | 14 Oct |
27 of 27
Download these 27 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.