Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2022-42896exploit ×2 | 8.8 high | 2.0% | linux, linux_kernel | There are use-after-free vulnerabilities in the Linux kernel's net/bluetooth/l2cap_core.c's l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://www.google.com/url https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4 https://www.google.com/url | 14 Oct |
| CVE-2026-88877exploit | 9.3 critical | 1.0% | traefik | Traefik is a HTTP reverse proxy and load balancer. In versions >= v3.7.0 and <= v3.7.11, the Kubernetes ingress-nginx provider mishandles Ingresses that carry both an authentication annotation and the nginx.ingress.kubernetes.io/from-to-www-redirect annotation. For such Ingresses the provider creates an additional 'sibling' router that matches on the host alone, carries only the RedirectRegex middleware, and still points at the parent router's protected backend service. Because RedirectRegex is not a terminal handler, a request its pattern does not match is forwarded to the backend, and because the redirect pattern only accepts a numeric port while Traefik's host matcher canonicalizes the authority via net.SplitHostPort, a request with a non-numeric or empty port (for example 'Host: www.example.com:x') selects the sibling router, misses the redirect, and is proxied to the protected backend with none of the Ingress's annotation-derived middlewares applied. This discards not only authentication (e.g. BasicAuth) but every annotation-derived middleware, including source-IP allowlisting. Traefik v2 and v3 releases before v3.7.0 are not affected. The issue is fixed in v3.7.12. | 8 Oct |
| CVE-2025-66262 | 9.3 critical | 2.0% | dbbroadcast, mozart_next_100_firmware, mozart_next_1000_firmware, mozart_next_2000_firmware | Arbitrary File Overwrite via Tar Extraction Path Traversal in DB Electronica Telecomunicazioni S.p.A. Mozart FM Transmitter versions 30, 50, 100, 300, 500, 1000, 2000, 3000, 3500, 6000, 7000 allows an attacker to perform Tar extraction with -C / allow arbitrary file overwrite via crafted archive. The `restore_mozzi_memories.sh` script extracts user-controlled tar archives with `-C /` flag, depositing contents to the filesystem root without path validation. When combined with the unauthenticated file upload vulnerabilities (CVE-01, CVE-06, CVE-07), attackers can craft malicious .tgz archives containing path-traversed filenames (e.g., `etc/shadow`, `var/www/index.php`) to overwrite critical system files in writable directories, achieving full system compromise. | 18 Oct |
| CVE-2026-32892 | 8.8 high | 2.0% | chamilo, chamilo_lms | Chamilo LMS is a learning management system. Prior to 1.11.38 and 2.0.0-RC.3, Chamilo LMS contains an OS Command Injection vulnerability in the file move function. The move() function in fileManage.lib.php passes user-controlled path values directly into exec() shell commands without using escapeshellarg(). When a user moves a document via document.php, the move_to POST parameter — which only passes through Security::remove_XSS() (an HTML-only filter) — is concatenated directly into shell commands such as exec("mv $source $target"). By default, Chamilo allows all authenticated users to create courses (allow_users_to_create_courses = true). Any user who is a teacher in a course (including self-created courses) can move documents, making this vulnerability exploitable by any authenticated user. The attacker must first place a directory with shell metacharacters in its name on the filesystem (achievable via Course Backup Import), then move a document into that directory to trigger arbitrary command execution as the web server user (www-data). This vulnerability is fixed in 1.11.38 and 2.0.0-RC.3. | Mon 26 Oct |
| CVE-2025-34222 | 10.0 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) expose four admin routes – /admin/hp/cert_upload, /admin/hp/cert_delete, /admin/certs/ca, and /admin/certs/serviceclients/{scid} – without any authentication check. The routes are defined in the /var/www/app/routes/web.php file inside the printercloud/pi Docker container and are handled by the HPCertificateController class, which performs no user validation. An unauthenticated attacker can therefore upload a new TLS/SSL certificate replacing the trusted root used by the appliance, delete an existing certificate causing immediate loss of trust for services that rely on it, or download any stored CA or client certificate via the service‑clients endpoint which also suffers an IDOR that allows enumeration of all client IDs. This vulnerability has been identified by the vendor as: V-2024-028 — Unauthenticated Admin APIs Used to Modify SSL Certificates. | 18 Oct |
| CVE-2026-78796 | 9.8 critical | 1.0% | no CPE yet | An issue in Netcore B11 Enterprise-level full Gigabit 9-port shop wireless router v1.3.241114.024540 and before allows a remote attacker to execute arbitrary code via the www\cgi-bin\upgrade file | 19 Oct |
| CVE-2026-21571 | 9.4 critical | 1.0% | atlassian, bamboo | This Critical severity OS Command Injection vulnerability was introduced in versions 9.6.0, 10.0.0, 10.1.0, 10.2.0, 11.0.0, 11.1.0, 12.0.0, and 12.1.0 of Bamboo Data Center. This RCE (Remote Code Execution) vulnerability, with a CVSS Score of 9.4 and a CVSS Vector of CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H allows an authenticated attacker to execute commands on the remote system, which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires no user interaction. Atlassian recommends that Bamboo Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Bamboo Data Center 9.6.0: Upgrade to a release greater than or equal to 9.6.25 Bamboo Data Center 10.2: Upgrade to a release greater than or equal to 10.2.18 Bamboo Data Center 12.1: Upgrade to a release greater than or equal to 12.1.6 See the release notes ([https://confluence.atlassian.com/bambooreleases/bamboo-release-notes-1189793869.html]). You can download the latest version of Bamboo Data Center from the download center ([https://www.atlassian.com/software/bamboo/download-archives]). | Mon 26 Oct |
| CVE-2025-34205 | 9.3 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.843 and Application prior to 20.0.1923 (VA and SaaS deployments) contains dangerous PHP dead code present in multiple Docker-hosted PHP instances. A script named /var/www/app/resetroot.php (found in several containers) lacks authentication checks and, when executed, performs a SQL update that sets the database administrator username to 'root' and its password hash to the SHA-512 hash of the string 'password'. Separately, commented-out code in /var/www/app/lib/common/oses.php would unserialize session data (unserialize($_SESSION['osdata']))—a pattern that can enable remote code execution if re-enabled or reached with attacker-controlled serialized data. An attacker able to reach the resetroot.php endpoint can trivially reset the MySQL root password and obtain full database control; combined with deserialization issues this can lead to full remote code execution and system compromise. This vulnerability has been identified by the vendor as: V-2023-003 — Dead / Insecure PHP Code. | 18 Oct |
| CVE-2025-34206 | 9.3 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host and Application (VA and SaaS deployments) mount host configuration and secret material under /var/www/efs_storage into many Docker containers with overly-permissive filesystem permissions. Files such as secrets.env, GPG-encrypted blobs in .secrets, MySQL client keys, and application session files are accessible from multiple containers. An attacker who controls or reaches any container can read or modify these artifacts, leading to credential theft, RCE via Laravel APP_KEY, Portainer takeover, and full compromise. | 18 Oct |
| CVE-2026-6257 | 9.2 critical | 1.0% | no CPE yet | Vvveb CMS v1.0.8.2 contains a remote code execution vulnerability in its media management functionality where a missing return statement in the file rename handler allows authenticated attackers to rename files to blocked extensions .php or .htaccess. Attackers can exploit this logic flaw by first uploading a text file and renaming it to .htaccess to inject Apache directives that register PHP-executable MIME types, then uploading another file and renaming it to .php to execute arbitrary operating system commands as the www-data user. | Mon 26 Oct |
| CVE-2026-35573 | 9.1 critical | 1.0% | churchcrm | ChurchCRM is an open-source church management system. Prior to 6.5.3, a path traversal vulnerability in ChurchCRM's backup restore functionality allows authenticated administrators to upload arbitrary files and achieve remote code execution by overwriting Apache .htaccess configuration files. The vulnerability exists in src/ChurchCRM/Backup/RestoreJob.php. The $rawUploadedFile['name'] parameter is user-controlled and allows uploading files with arbitrary names to /var/www/html/tmp_attach/ChurchCRMBackups/. This vulnerability is fixed in 6.5.3. | Mon 26 Oct |
| CVE-2025-34228 | 8.8 high | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a server-side request forgery (SSRF) vulnerability. The `/var/www/app/console_release/lexmark/update.php` script is reachable from the internet without any authentication. The PHP script builds URLs from user‑controlled values and then invokes either 'curl_exec()` or `file_get_contents()` without proper validation. Because the endpoint is unauthenticated, any remote attacker can supply a hostname and cause the server to issue requests to internal resources. This enables internal network reconnaissance, potential pivoting, or data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34231 | 8.8 high | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind and non-blind server-side request forgery (SSRF) vulnerability. The '/var/www/app/console_release/hp/badgeSetup.php' script is reachable from the Internet without any authentication and builds URLs from user‑controlled parameters before invoking either the custom processCurl() function or PHP’s file_get_contents(); in both cases the hostname/URL is taken directly from the request with no whitelist, scheme restriction, IP‑range validation, or outbound‑network filtering. Consequently, any unauthenticated attacker can force the server to issue arbitrary HTTP requests to internal resources. This enables internal network reconnaissance, credential leakage, pivoting, and data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-66438 | 8.8 high | 1.0% | frappe, erpnext | A Server-Side Template Injection (SSTI) vulnerability exists in the Frappe ERPNext through 15.89.0 Print Format rendering mechanism. Specifically, the API frappe.www.printview.get_html_and_style() triggers the rendering of the html field inside a Print Format document using frappe.render_template(template, doc) via the get_rendered_template() call chain. Although ERPNext wraps Jinja2 in a SandboxedEnvironment, it exposes sensitive functions such as frappe.db.sql through get_safe_globals(). An authenticated attacker with permission to create or modify a Print Format can inject arbitrary Jinja expressions into the html field. Once the malicious Print Format is saved, the attacker can call get_html_and_style() with a target document (e.g., Supplier or Sales Invoice) to trigger the render process. This leads to information disclosure from the database, such as database version, schema details, or sensitive values, depending on the injected payload. Exploitation flow: Create a Print Format with SSTI payload in the html field; call the get_html_and_style() API; triggers frappe.render_template(template, doc) inside get_rendered_template(); leaks database information via frappe.db.sql or other exposed globals. | 14 Oct |
| CVE-2026-118477 | 8.7 high | 1.0% | no CPE yet | The ei_git_repo_url parameter in the Git remote configuration endpoint of KaliFast is vulnerable to OS Command Injection. This OS Command Injection vulnerability allows an authenticated attacker (free registration available) to execute arbitrary commands on the KaliFast server with www-data privileges. Fixed in version 2026061802. | Wed 28 Oct |
| CVE-2026-54892 | 8.7 high | 1.0% | no CPE yet | Inefficient algorithmic complexity in Plug's nested-parameter decoder allows an unauthenticated remote attacker to cause denial of service. Plug.Conn.Query.decode/4 (and Plug.Conn.Query.decode_each/2) parse query strings and application/x-www-form-urlencoded request bodies. When a key contains many bracketed segments such as a[a][a][a]=1, the decoder walks the brackets and, for each of the N levels, performs a map operation keyed on an ever-growing binary prefix of the key, hashing the full byte range at each step. The total decode cost is therefore quadratic in the number of nesting levels. With the default Plug.Parsers.URLENCODED body limit of 1,000,000 bytes, a single request can carry roughly 333,000 nesting levels and saturate a BEAM scheduler for minutes. A small number of concurrent requests can saturate all schedulers and render a Plug-based server unresponsive. No authentication or knowledge of application routes is required. This vulnerability is associated with program files lib/plug/conn/query.ex and program routines Plug.Conn.Query.decode/4, Plug.Conn.Query.decode_each/2, Plug.Conn.Query.split_keys/6, Plug.Conn.Query.insert_keys/3, and Plug.Conn.Query.finalize_pointer/2. This issue affects plug from 1.15.0 before 1.15.5, 1.16.4, 1.17.2, 1.18.3, and 1.19.3. | Sun 25 Oct |
| CVE-2026-55676 | 8.7 high | 1.0% | no CPE yet | Malcolm is a network traffic analysis tool suite. The file-upload component (FilePond PHP backend) accepts uploads at `POST /server/php/submit.php` and stores them in a directory served by the same nginx and php-fpm instance. The allow-list that should restrict accepted file types is an empty array by default (`file-upload/php/config.php:16`), so the type check is a no-op and every extension is accepted. The filename sanitizer keeps the `.php` extension intact. Committed files land in `/var/www/upload/server/php/files` (`file-upload/php/config.php:7`), and the component's nginx routes any URL ending in `.php` to php-fpm. An authenticated `GET /server/php/files/<name>.php` then executes the uploaded code as `www-data`. Prior to version 26.06.1, in RBAC mode, the upload endpoint is reachable by the granular `ROLE_UPLOAD` role (`nginx/lua/nginx_auth_helpers.lua:71`), a role intended only for submitting capture files. As a result, a user holding the upload-only role runs arbitrary PHP as `www-data` inside the file-upload container. Version 26.06.1 fixes the issue. | Sat 24 Oct |
| CVE-2025-22166 | 8.3 high | 1.0% | atlassian, confluence_data_center, confluence_server | This High severity DoS (Denial of Service) vulnerability was introduced in version 2.0 of Confluence Data Center. This DoS (Denial of Service) vulnerability, with a CVSS Score of 8.3, allows an attacker to cause a resource to be unavailable for its intended users by temporarily or indefinitely disrupting services of a host connected to a network. Atlassian recommends that Confluence Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Confluence Data Center and Server 8.5: Upgrade to a release greater than or equal to 8.5.25 Confluence Data Center and Server 9.2: Upgrade to a release greater than or equal to 9.2.7 Confluence Data Center and Server 10.0: Upgrade to a release greater than or equal to 10.0.2 See the release notes ([https://confluence.atlassian.com/doc/confluence-release-notes-327.html]). You can download the latest version of Confluence Data Center from the download center ([https://www.atlassian.com/software/confluence/download-archives]). This vulnerability was reported via our Atlassian (Internal) program. | 8 Oct |
| CVE-2026-56091 | 8.2 high | 1.0% | no CPE yet | When using Apache Shiro with the shiro-guice module in a web servlet context, a specially crafted HTTP request may cause an authentication bypass. This vulnerability is similar to https://www.cve.org/CVERecord?id=CVE-2020-1957 https://www.cve.org/CVERecord , except that it affects the `shiro-guice` module instead of the `shiro-spring` module. This issue affects all Apache Shiro versions through 2.x, and 3.0.0-alpha-1 only when using `shiro-guice` module in a web servlet context. Upgrade to version 3.0.0 or later, which fixes the issue. | Sun 25 Oct |
| CVE-2026-21575 | 8.0 high | 1.0% | atlassian, sourcetree | This High severity RCE (Remote Code Execution) vulnerability was introduced in version 3.4.11 of Sourcetree for Mac and Sourcetree for Windows. This RCE (Remote Code Execution) vulnerability, with a CVSS Score of 7.1, allows an authenticated attacker to execute arbitrary code which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires user interaction. Atlassian recommends that Sourcetree for Mac and Sourcetree for Windows customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: * Sourcetree for Mac and Sourcetree for Windows 3.4: Upgrade to a release greater than or equal to 3.4.13 See the release notes (https://www.sourcetreeapp.com/download-archives). You can download the latest version of Sourcetree for Mac and Sourcetree for Windows from the download center (https://www.sourcetreeapp.com/download-archives). This vulnerability was reported via our Bug Bounty program. | Sat 24 Oct |
| CVE-2026-58390 | 8.0 high | 1.0% | no CPE yet | OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the OpenVPN connection-status dashboard widget in src/opnsense/www/js/widgets/OpenVPNClients.js and the connection-status view place a client common_name into data-common-name attributes without quote-safe encoding. Exploitation requires an OpenVPN server configured with username-as-common-name and RADIUS or LDAP authentication, plus the ability to provision or self-register a valid backend username containing a double quote; deployments where the same administrator controls both the identity backend and firewall do not cross a separate trust boundary. An authenticated client using that username can close the attribute and add an event handler, while the local user database is not affected because its username validator rejects quotes. Script executes in an administrator's session when the administrator opens the dashboard or connection-status page and the injected event is triggered; the demonstrated payload used pointer movement over the client row rather than unconditional page-load execution. The advisory demonstrates that the script can read config.xml, invoke privileged APIs, reset the root password, and obtain root command execution. This issue is fixed in version 26.1.11. | 20 Oct |
| CVE-2026-97394 | 7.5 high | 1.0% | no CPE yet | kin-openapi is a Go project for handling OpenAPI files. From 0.136.0 until 0.143.0, openapi3filter accepts OpenAPI 3.1 array schemas without an items keyword and then dereferences the nil Schema.Items value while decoding application/x-www-form-urlencoded or multipart/form-data request bodies, response headers, and other array parameter surfaces. A remote unauthenticated client can reach an affected operation with a nonempty request or matching response and deterministically trigger a nil-pointer panic during ValidateRequest or ValidateResponse. OpenAPI 3.0 documents are not affected because document validation rejects arrays without items, and JSON request bodies use a different decoder path. This issue is fixed in version 0.143.0. | 20 Oct |
| CVE-2025-61919 | 7.5 high | 1.0% | rack | Rack is a modular Ruby web server interface. Prior to versions 2.2.20, 3.1.18, and 3.2.3, `Rack::Request#POST` reads the entire request body into memory for `Content-Type: application/x-www-form-urlencoded`, calling `rack.input.read(nil)` without enforcing a length or cap. Large request bodies can therefore be buffered completely into process memory before parsing, leading to denial of service (DoS) through memory exhaustion. Users should upgrade to Rack version 2.2.20, 3.1.18, or 3.2.3, anu of which enforces form parameter limits using `query_parser.bytesize_limit`, preventing unbounded reads of `application/x-www-form-urlencoded` bodies. Additionally, enforce strict maximum body size at the proxy or web server layer (e.g., Nginx `client_max_body_size`, Apache `LimitRequestBody`). | 19 Oct |
| CVE-2024-3884 | 7.5 high | 1.0% | no CPE yet | A flaw was found in Undertow that can cause remote denial of service attacks. When the server uses the FormEncodedDataDefinition.doParse(StreamSourceChannel) method to parse large form data encoding with application/x-www-form-urlencoded, the method will cause an OutOfMemory issue. This flaw allows unauthorized users to cause a remote denial of service (DoS) attack. | 14 Oct |
| CVE-2026-15544 | 7.4 high | 1.0% | no CPE yet | A vulnerability was determined in Shibby Tomato up to 1.28.0000. Affected is the function getupsvar of the file www/apcupsd/tomatodata.cgi of the component apcupsd. This manipulation of the argument Field causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. This project is superseded by FreshTomato. | Sat 24 Oct |
| CVE-2026-15545 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in Shibby Tomato up to 1.28.0000. Affected by this vulnerability is the function main of the file www/apcupsd/tomatodata.cgi of the component apcupsd. Such manipulation leads to out-of-bounds write. The attack may be launched remotely. The exploit is publicly available and might be used. This project is superseded by FreshTomato. | Sat 24 Oct |
| CVE-2026-34480 | 6.9 medium | 1.0% | apache, log4j | Apache Log4j Core's XmlLayout https://logging.apache.org/log4j/2.x/manual/layouts.html#XmlLayout , in versions up to and including 2.25.3, fails to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets producing invalid XML output whenever a log message or MDC value contains such characters. The impact depends on the StAX implementation in use: * JRE built-in StAX: Forbidden characters are silently written to the output, producing malformed XML. Conforming parsers must reject such documents with a fatal error, which may cause downstream log-processing systems to drop the affected records. * Alternative StAX implementations (e.g., Woodstox https://github.com/FasterXML/woodstox , a transitive dependency of the Jackson XML Dataformat module): An exception is thrown during the logging call, and the log event is never delivered to its intended appender, only to Log4j's internal status logger. Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue by sanitizing forbidden characters before XML output. | Mon 26 Oct |
| CVE-2025-34229 | 6.9 medium | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/hp/installApp.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34230 | 6.9 medium | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/hp/log_off_single_sign_on.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34232 | 6.9 medium | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/lexmark/dellCheck.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-49138 | 6.5 medium | 1.0% | psu, haxcms-php | HAX CMS PHP allows users to manage their microsite universe with a PHP backend. Prior to version 11.0.0, an authenticated Local File Inclusion (LFI) vulnerability in the HAXCMS saveOutline endpoint allows a low-privileged user to read arbitrary files on the server by manipulating the location field written into site.json. This enables attackers to exfiltrate sensitive system files such as /etc/passwd, application secrets, or configuration files accessible to the web server (www-data). The vulnerability stems from the way the HAXCMS backend handles the location field in the site's outline. When a user sends a POST request to /system/api/saveOutline, the backend stores the provided location value directly into the site.json file associated with the site, without validating or sanitizing the input. Later the location parameter is interpreted by the CMS to resolve and load the content for a given node. If the location field contains a relative path like `../../../etc/passwd`, the application will attempt to read and render that file. Version 11.0.0 fixes the issue. | 18 Oct |
| CVE-2026-40021 | 6.3 medium | 1.0% | apache, log4net | Apache Log4net's XmlLayout https://logging.apache.org/log4net/manual/configuration/layouts.html#layout-list and XmlLayoutSchemaLog4J https://logging.apache.org/log4net/manual/configuration/layouts.html#layout-list , in versions before 3.3.0, fail to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets in MDC property keys and values, as well as the identity field that may carry attacker-influenced data. This causes an exception during serialization and the silent loss of the affected log event. An attacker who can influence any of these fields can exploit this to suppress individual log records, impairing audit trails and detection of malicious activity. Users are advised to upgrade to Apache Log4net 3.3.0, which fixes this issue. | Mon 26 Oct |
| CVE-2026-73228 | 5.3 medium | 1.0% | no CPE yet | Django REST framework is a toolkit for building Web APIs. Prior to 3.17.2, Django REST Framework's request.data parsing in rest_framework/request.py Request._parse() passes the underlying HttpRequest stream to JSONParser and FormParser for application/json and application/x-www-form-urlencoded bodies, bypassing Django's DATA_UPLOAD_MAX_MEMORY_SIZE protection and allowing oversized request bodies to consume additional memory and CPU. This issue is fixed in version 3.17.2. | Sat 24 Oct |
| CVE-2025-65287 | 4.3 medium | 1.0% | cdpenergy, snmp_web_pro_firmware | An unauthenticated directory traversal vulnerability in cgi-bin/upload.cgi in SNMP Web Pro 1.1 allows a remote attacker to read arbitrary files. The CGI concatenates the user-supplied params directly onto the base path (/var/www/files/userScript/) using memcpy + strcat without validation or canonicalization, enabling ../ sequences to escape the intended directory. The download branch also echoes the unsanitized params into Content-Disposition, introducing header-injection risk. | 15 Oct |
| CVE-2026-54630 | 9.6 critical | 0.00% | no CPE yet | Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.1, the part attachment upload handler stores uploaded files under the web-served media directory using the client-supplied file extension, and its extension blocklist does not include phar. AttachmentSubmitHandler::renameBlacklistedExtensions() rewrites dangerous extensions (php, phtml, sh, cgi, py, js, html, htaccess, ...) to .txt, but phar is absent from the list, so a .phar file keeps its extension. Public attachments (the default) are written into public/media/, which is the Apache document root. The shipped Apache configuration routes .phar to PHP-FPM, so the stored file is executed as PHP on request. The per-attachment-type extension filter is empty by default and is not consulted by the upload handler in a way that blocks this, and a non-admin user in the default users group can create an attachment type with no filter and attach files to parts. Any authenticated user in the default users group uploads a .phar attachment to a part and fetches it under /media/, executing arbitrary PHP as the www-data web user. Ability to exploit depends on the webserver config, docker image contained the vulnerability by default. This issue has been patched in version 2.12.1. | Fri 23 Oct |
| CVE-2025-34234 | 9.2 critical | 0.00% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain two hardcoded private keys that are shipped in the application containers (printerlogic/pi, printerlogic/printer-admin-api, and printercloud/pi). The keys are stored in clear text under /var/www/app/config/ as keyfile.ppk.dev and keyfile.saasid.ppk.dev. The application uses these keys as the symmetric secret for AES‑256‑CBC encryption/decryption of the “SaaS Id” (external identifier) through the getEncryptedExternalId() / getDecryptedExternalId() methods. Because the secret is embedded in the deployed image, any attacker who can obtain a copy of the Docker image, read the configuration files, or otherwise enumerate the filesystem can recover the encryption key. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-66257 | 9.2 critical | 0.00% | dbbroadcast, mozart_next_100_firmware, mozart_next_1000_firmware, mozart_next_2000_firmware | Unauthenticated Arbitrary File Deletion (patch_contents.php) in DB Electronica Telecomunicazioni S.p.A. Mozart FM Transmitter versions 30, 50, 100, 300, 500, 1000, 2000, 3000, 3500, 6000, 7000 allows an attacker to perform The deletepatch parameter allows unauthenticated deletion of arbitrary files. The `deletepatch` parameter in `patch_contents.php` allows unauthenticated deletion of arbitrary files in `/var/www/patch/` directory without sanitization or access control checks. | 18 Oct |
| CVE-2026-32931 | 8.8 high | 0.00% | chamilo, chamilo_lms | Chamilo LMS is a learning management system. Prior to 1.11.38 and 2.0.0-RC.3, an unrestricted file upload vulnerability in the exercise sound upload function allows an authenticated teacher to upload a PHP webshell by spoofing the Content-Type header to audio/mpeg. The uploaded file retains its original .php extension and is placed in a web-accessible directory, enabling Remote Code Execution as the web server user (www-data). This vulnerability is fixed in 1.11.38 and 2.0.0-RC.3. | Mon 26 Oct |
| CVE-2026-53593 | 8.8 high | 0.00% | no CPE yet | FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the denylist that neutralizes dangerous file uploads (`Helper::$restricted_extensions`) is incomplete: it does not cover the `.pht` extension. The authenticated upload endpoint `POST /uploads/upload` (`SecureController@upload`) stores files with their original extension into the web-accessible directory `storage/app/public/uploads/` (served at `/storage/uploads/`). On the standard Apache + `libapache2-mod-php` deployment, the default handler `<FilesMatch ".+\.ph(ar|p[3457]?|t|tml)$">` executes `.pht`, so **any authenticated agent can upload a `.pht` web shell and run arbitrary commands as the web-server user** (`www-data`). This is a direct bypass of the fix for CVE-2025-48471, which added `phtml`/`phar` but not `pht` (nor `phtm`, `phps`). Version 1.8.224 contains an updated fix. | Sat 24 Oct |
| CVE-2026-21582 | 8.8 high | 0.00% | no CPE yet | This High severity BASM (Broken Authentication & Session Management) vulnerability known as CVE-2026-21582 was introduced in version 7.2.1 of Crowd Data Center. This BASM (Broken Authentication & Session Management) vulnerability, with a CVSS Score of 8.8, allows an unauthenticated attacker to perform actions as another user. Atlassian recommends that Crowd Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Crowd Data Center 7.2: Upgrade to a release greater than or equal to 7.2.2 See the release notes (https://confluence.atlassian.com/crowd/crowd-release-notes-199094.html). You can download the latest version of Crowd Data Center from the download center (https://www.atlassian.com/software/crowd/download-archive). This vulnerability was reported via our Penetration Testing program. | 22 Oct |
| CVE-2026-23395 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found. | 19 Oct |
| CVE-2026-63725 | 8.6 high | 0.00% | no CPE yet | sysPass's FileBackupService::doBackupFiles() in lib/SP/Services/Backup/FileBackupService.php around line 388 builds a tar shell command by string-concatenating the backup directory path $this->path directly into the command line ('tar czf ' . $backupFileApp . ' ' . BASE_PATH . ' --exclude \"' . $this->path . '\" 2>&1') and passes the result to PHP's exec() with no application of escapeshellarg() and no validation of the path against a safe character set. The $this->path value is read from the sysPass configuration, which is persisted in the database and writable through the admin settings API and the admin UI. An administrator (or an attacker who has obtained an admin API token or admin session) can therefore store a backup path containing shell metacharacters and trigger a backup operation to execute arbitrary OS commands as the web server process user (typically www-data or apache). Because sysPass is a password manager whose sole purpose is to hold credentials for other systems, code execution as the web-server user permits reading sysPass's master password and encryption key from memory or configuration files, decrypting every stored credential in the database, exporting the entire password vault, pivoting to internal systems using the disclosed credentials, and installing persistent backdoors on the password-manager host. | Sat 24 Oct |
| CVE-2026-21579 | 8.2 high | 0.00% | atlassian, confluence_data_center | This High severity Information Disclosure vulnerability was introduced in versions 7.17.0, 7.19.0, 8.5.0, 8.9.0, 9.0.1, 9.1.0, 9.2.0, 10.0.2, 10.1.0, and 10.2.0 of Confluence Data Center. This Information Disclosure vulnerability, with a CVSS Score of 8.2, allows an unauthenticated attacker to view sensitive information via an Information Disclosure vulnerability. Atlassian recommends that Confluence Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Confluence Data Center 9.2: Upgrade to a release greater than or equal to 9.2.22 Confluence Data Center 10.2: Upgrade to a release greater than or equal to 10.2.14 See the release notes ([https://confluence.atlassian.com/doc/confluence-release-notes-327.html]). You can download the latest version of Confluence Data Center from the download center ([https://www.atlassian.com/software/confluence/download-archives]). This vulnerability was reported via our Atlassian (Internal) program. | Sat 24 Oct |
| CVE-2025-66254 | 7.8 high | 0.00% | dbbroadcast, mozart_next_100_firmware, mozart_next_1000_firmware, mozart_next_2000_firmware | Unauthenticated Arbitrary File Deletion (upgrade_contents.php) in DB Electronica Telecomunicazioni S.p.A. Mozart FM Transmitter versions 30, 50, 100, 300, 500, 1000, 2000, 3000, 3500, 6000, 7000 allows an attacker to perform The deleteupgrade parameter allows unauthenticated deletion of arbitrary files. The `deleteupgrade` parameter in `/var/www/upgrade_contents.php` allows unauthenticated deletion of arbitrary files in `/var/www/upload/` without any extension restriction or path sanitization, enabling attackers to remove critical system files. | 18 Oct |
| CVE-2026-21584 | 7.6 high | 0.00% | atlassian, bamboo | This High severity Improper Authorization vulnerability was introduced in versions 10.0.0, 10.1.0, 10.2.0, 11.0.0, 12.0.0, and 12.1.0 of Bamboo Data Center. This Improper Authorization vulnerability, with a CVSS Score of 7.6, allows an authenticated attacker to gain unintended access and can lead to the exposure of resources or functionality, possibly providing attackers with sensitive information or even execute arbitrary code. Atlassian recommends that Bamboo Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: * Bamboo Data Center 10.2: Upgrade to a release greater than or equal to 10.2.22 * Bamboo Data Center 12.1: Upgrade to a release greater than or equal to 12.1.10 See the release notes (https://confluence.atlassian.com/bambooreleases/bamboo-release-notes-1189793869.html). You can download the latest version of Bamboo Data Center from the download center (https://www.atlassian.com/software/bamboo/download-archives). This vulnerability was reported via our Penetration Testing program. | 22 Oct |
| CVE-2026-53539 | 7.5 high | 0.00% | fastapiexpert, python-multipart | Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.30, when parsing application/x-www-form-urlencoded bodies, QuerystringParser located the field separator with a two step lookup: it first scanned the entire remaining buffer for &, and only when no & existed anywhere ahead did it fall back to scanning for ;. For a body that uses ; as the separator and contains no &, every field iteration performed a full failed & scan over the entire remaining buffer before locating the nearby ;. With N semicolon separated fields in a chunk of size B, this yields O(B^2) byte comparisons per chunk. An attacker can submit a small crafted body of the form a;a;a;... and cause the parser to spend seconds of CPU per request. A handful of concurrent requests can exhaust worker processes. This vulnerability is fixed in 0.0.30. | Sun 25 Oct |
| CVE-2026-54283 | 7.5 high | 0.00% | encode, starlette | Starlette is a lightweight ASGI framework/toolkit. From 0.4.1 until 1.3.1, request.form() accepts max_fields and max_part_size to bound resource consumption while parsing form data. These limits are enforced for multipart/form-data, but silently ignored for application/x-www-form-urlencoded. An unauthenticated attacker can therefore send a urlencoded body with an arbitrarily large number of fields or an arbitrarily large field, even when the application configured limits it believed would apply. This vulnerability is fixed in 1.3.1. | Sun 25 Oct |
| CVE-2026-100353 | 7.5 high | 0.00% | no CPE yet | kin-openapi is a Go project for handling OpenAPI files. From 0.136.0 until 0.149.0, three openapi3filter decoder paths that were missed by the fix for GHSA-p6wj-qrr4-pgh5 lack a nil-items guard for legal OpenAPI 3.1 array schemas. An unauthenticated remote client can trigger a deterministic nil-pointer panic through an array query parameter, a deepObject query parameter containing an array property, or an application/x-www-form-urlencoded request body whose array property appears inside an allOf, anyOf, or oneOf subschema. The query and composed-body paths reach urlValuesDecoder.parseArray, while the deepObject path reaches buildResObj, and all pass a nil items schema into code that dereferences it. This issue is fixed in version 0.149.0. | 15 Oct |
| CVE-2026-0392 | 7.3 high | 0.00% | no CPE yet | eParakstītājs 3.0 for Windows before version 1.10.0 retrieves and executes its automatic updates over a channel that is not authenticated or integrity-protected. On each launch the application fetches an update descriptor (XML) over TLS but accepts any TLS certificate (a permissive TrustManager and a HostnameVerifier that always returns true), does not verify any digital signature on the update descriptor, and does not verify the Authenticode signature or a checksum of the downloaded installer before running it. A man-in-the-middle attacker able to redirect www.eparaksts.lv can serve a crafted update descriptor pointing to an attacker-controlled executable, which the client downloads and executes, resulting in arbitrary code execution on the victim host. | Fri 23 Oct |
| CVE-2025-40927 | 7.3 high | 0.00% | no CPE yet | CGI::Simple versions before 1.282 for Perl has a HTTP response splitting flaw This vulnerability is a confirmed HTTP response splitting flaw in CGI::Simple that allows HTTP response header injection, which can be used for reflected XSS or open redirect under certain conditions. Although some validation exists, it can be bypassed using URL-encoded values, allowing an attacker to inject untrusted content into the response via query parameters. As a result, an attacker can inject a line break (e.g. %0A) into the parameter value, causing the server to split the HTTP response and inject arbitrary headers or even an HTML/JavaScript body, leading to reflected cross-site scripting (XSS), open redirect or other attacks. The issue documented in CVE-2010-4410 https://www.cve.org/CVERecord?id=CVE-2010-4410 is related but the fix was incomplete. Impact By injecting %0A (newline) into a query string parameter, an attacker can: * Break the current HTTP header * Inject a new header or entire body * Deliver a script payload that is reflected in the server’s response That can lead to the following attacks: * reflected XSS * open redirect * cache poisoning * header manipulation | 18 Oct |
50 of 78 · Next
Download these 78 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.