Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-43866exploit | 7.3 high | 1.0% | apache, camel | Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component. JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes. | Sun 25 Oct |
| CVE-2026-46587exploit | 7.3 high | 1.0% | apache, camel | Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. | Sun 25 Oct |
| CVE-2026-46588exploit | 7.3 high | 1.0% | apache, camel | Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. | Sun 25 Oct |
| CVE-2026-49042exploit | 7.3 high | 1.0% | apache, camel | Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue. | Sun 25 Oct |
| CVE-2026-49086exploit | 6.5 medium | 1.0% | apache, camel | Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component. The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed. This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it. | Sun 25 Oct |
| CVE-2026-49097exploit | 6.5 medium | 1.0% | apache, camel | Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component. The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source. | Sun 25 Oct |
| CVE-2026-59230exploit | 6.5 medium | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel. This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel*”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input. | 12 Oct |
| CVE-2026-49844exploit | 6.3 medium | 1.0% | apache, log4j | Improper encoding of non-finite floating-point values during MapMessage JSON serialization in Apache Log4j API produces output that is not valid JSON. This issue affects Apache Log4j API versions 2.13.1 through 2.25.4 and version 2.26.0. The fix for CVE-2026-34481 did not cover all code paths: when a MapMessage contains a non-finite IEEE 754 value (NaN, Infinity, or -Infinity), MapMessage.asJson() emits the corresponding bare token. RFC 8259 does not permit these tokens, so a conformant parser rejects the resulting document. The defect is reachable only when both of the following conditions hold: * The application uses the message resolver https://logging.apache.org/log4j/2.x/manual/json-template-layout.html#event-template-resolver-message of JsonTemplateLayout or any other layout that relies on MapMessage.asJson() or MapMessage.getFormattedMessage(new String[]{"JSON"}). * The application logs a MapMessage that contains an attacker-controlled floating-point value. An attacker who can supply a non-finite value can cause the affected layout to emit malformed JSON, which may corrupt the enclosing log record or disrupt downstream log ingestion and parsing. Users are advised to upgrade to Apache Log4j API 2.25.5 or 2.26.1, both of which emit RFC 8259-compliant JSON for non-finite values. | Sun 25 Oct |
| CVE-2026-25854exploit | 6.1 medium | 1.0% | apache, tomcat | Occasional URL redirection to untrusted Site ('Open Redirect') vulnerability in Apache Tomcat via the LoadBalancerDrainingValve. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.1.0-M1 through 10.1.52, from 9.0.0.M23 through 9.0.115, from 8.5.30 through 8.5.100. Other, unsupported versions may also be affected Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue. | Mon 26 Oct |
| CVE-2026-46453exploit | 5.3 medium | 1.0% | apache, camel | Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client. The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally. This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names. | Sun 25 Oct |
| CVE-2026-48206exploit | 5.3 medium | 1.0% | apache, camel | Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component. The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source. | Sun 25 Oct |
| CVE-2026-63621exploit | 5.3 medium | 1.0% | apache, camel | Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Knative component The Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel's header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453). This issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0. | 12 Oct |
| CVE-2026-33006exploit | 4.8 medium | 1.0% | apache, http_server | A timing attack against mod_auth_digest in Apache HTTP Server 2.4.66 allows a bypass of Digest authentication by a remote attacker. Users are recommended to upgrade to version 2.4.67, which fixes this issue. | Mon 26 Oct |
| CVE-2026-46584exploit | 3.7 low | 1.0% | apache, camel | Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input. | Sun 25 Oct |
| CVE-2026-78164exploit | 8.2 high | 0.00% | no CPE yet | Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components. Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. | 19 Oct |
| CVE-2026-80344exploit | 8.2 high | 0.00% | no CPE yet | Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. | 19 Oct |
| CVE-2026-88901exploit | 8.2 high | 0.00% | no CPE yet | Improper Restriction of XML External Entity Reference vulnerability in Apache Camel. This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1. Improper Restriction of XML External Entity Reference in the Smooks component (camel-smooks) in Apache Camel allows an attacker who supplies the XML message body to read local files or issue requests to internal network locations via an external entity declaration in that body. This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1. The Smooks data format (.unmarshal().smooks(...)) and the Smooks component (smooks:) parse the incoming XML body with the reader Smooks resolves by default, which is the Woodstox SAX parser. That reader resolves external general and parameter entities and loads external DTDs, and camel-smooks applied none of the parser hardening that the other Camel XML components apply. A DOCTYPE with an external subset, or an external general entity, declared in the XML document is therefore resolved and expanded while the body is unmarshalled, and the resolved content is bound into the unmarshalled result and returned on InOut routes. An external sender whose XML reaches a camel-smooks data format or endpoint could therefore read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since resolving external entities was the default behaviour. Configurations that declare their own reader - EDI, CSV, JSON, or a custom reader - do not use the XML reader and are not affected. Users are recommended to upgrade to version 4.18.5, 4.22.1 or 4.23.0, which fixes the issue. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. camel-smooks now parses the XML body with a javax.xml.parsers.DocumentBuilder that does not resolve external general or parameter entities and does not load external DTDs, and hands Smooks the resulting document, matching the secure XML processing configuration used by org.apache.camel.converter.jaxp.XmlConverter and the other Camel XML components. This hardening is applied only when the Smooks configuration parses XML with its default reader, so EDI, CSV, JSON and custom-reader configurations, and the marshalling direction, are unchanged. A new allowExternalEntities option, disabled by default, restores the previous behaviour for trusted legacy configurations that rely on external entity resolution. The camel-4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not apply camel-smooks to XML received from untrusted senders. | 19 Oct |
| CVE-2026-35194exploit | 8.1 high | 0.00% | apache, flink | Code injection in SQL code generation in Apache Flink 1.15.0 through 1.20.x and 2.0.0 through 2.x allows authenticated users with query submission privileges to execute arbitrary code on TaskManagers via maliciously crafted SQL queries. The vulnerability affects JSON functions (1.15.0+) and LIKE expressions with ESCAPE clauses (1.17.0+). User-controlled strings are interpolated into generated Java code without proper escaping, allowing attackers to break out of string literals and inject arbitrary expressions. Users are recommended to upgrade to either version 1.20.4, 2.0.2, 2.1.2 or 2.2.1, which fixes this issue. | Mon 26 Oct |
| CVE-2026-40048exploit | 7.8 high | 0.00% | apache, camel | The Camel-PQC FileBasedKeyLifecycleManager class deserializes the contents of `<keyId>.key` files in the configured key directory using java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. The cast to `java.security.KeyPair` is evaluated only after `readObject()` has already returned, so any `readObject()` side effects in the deserialized object run before the type check. An attacker who can write to the key directory used by a Camel application — for example through a path traversal into the directory, misconfigured filesystem permissions on the volume where keys are stored, a compromised key provisioning pipeline, or a symlink attack — can place a crafted serialized Java object that, when deserialized during normal key lifecycle operations, results in arbitrary code execution in the context of the application. This issue affects Apache Camel: from 4.19.0 before 4.20.0, from 4.18.0 before 4.18.2. Users are recommended to upgrade to version 4.20.0, which fixes the issue by replacing java.io.ObjectInputStream-based key and metadata storage with standard PKCS#8 (private key) / X.509 SubjectPublicKeyInfo (public key) Base64 JSON encoding. For users on the 4.18.x LTS releases stream, upgrade to 4.18.2. | Mon 26 Oct |
| CVE-2026-84176exploit | 6.5 medium | 0.00% | no CPE yet | Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. | 19 Oct |
| CVE-2026-85249exploit | 6.5 medium | 0.00% | no CPE yet | Improper Input Validation vulnerability in Apache Camel Tika component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Tika producer mapped every metadata key parsed out of the submitted document onto the Exchange as a header, with no filter applied. Document metadata is attacker-controlled content: the party that supplies the file chooses the metadata keys it carries. A crafted document could therefore set Exchange headers that the rest of the route depends on, including headers in the Camel namespace such as CamelFileName, which downstream components use to decide where content is written. The pattern is the same header-injection class as the consumer advisories published previously, reached here through parsed file content rather than through a protocol header. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Parsed document metadata is now filtered through a HeaderFilterStrategy before it is mapped onto the Exchange. A route that was reading a metadata-derived header the filter now blocks will see it missing. For deployments that cannot upgrade immediately, strip the Camel namespace after the Tika producer with removeHeaders("Camel*") before any component that acts on those headers. | 19 Oct |
| CVE-2026-85254exploit | 6.5 medium | 0.00% | no CPE yet | Improper Handling of Case Sensitivity vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The guard that prevents a request header being reflected into the response compared header names case sensitively, while HTTP header names are case insensitive. A caller could therefore defeat the suppression simply by varying the case of the header name. HTTP/2 makes the problem unconditional rather than optional: the protocol requires header names to be lowercase on the wire, so the comparison never matched and the suppression was inert for every request on an HTTP/2 connection. The consequence is that content the caller chose is echoed back in the response, which is the basis for response-splitting and cache-poisoning style attacks against whatever sits in front of the Camel endpoint. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Request header names are now compared case insensitively, so the suppression holds regardless of casing and works under HTTP/2. For deployments that cannot upgrade immediately, strip the headers in question in front of the Camel endpoint, or remove them from the response in the route rather than relying on the built-in suppression. | 19 Oct |
| CVE-2026-85296exploit | 6.5 medium | 0.00% | no CPE yet | Exposure of Data Element to Wrong Session vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Signing material belonging to an individual request was stored in state that is shared across requests rather than confined to the request being processed. Where a deployment serves more than one trading partner, concurrent or successive requests could therefore observe each other's material, and a Message Disposition Notification could be signed with the key of a partner other than the one the receipt was for. The result is cross-partner key confusion: a receipt attributable to the wrong partner, and one partner's signing material used while handling another partner's exchange. AS2 deployments are typically multi-partner by design, so the condition is reached by ordinary concurrent traffic rather than by anything the attacker must arrange. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Per-request signing keys are now confined to the request being processed in ResponseMDN. For deployments that cannot upgrade immediately, run a separate Camel context per trading partner so that no signing material is shared between them. | 19 Oct |
| CVE-2026-85314exploit | 6.5 medium | 0.00% | no CPE yet | Improper Input Validation vulnerability in Apache Camel Mail component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. CVE-2026-46584 addressed mail headers reaching the Exchange without passing through a header filter, but the MimeMultipart data format retained an unfiltered path: unmarshalling a multipart message mapped mail.smtp headers onto the Exchange with no filter applied. Those names sit outside the Camel namespace that consumer filters block, so a message crafted by an external sender could still set them, and the mail.smtp namespace influences how a downstream mail producer connects and sends. This is an incomplete fix of CVE-2026-46584 rather than a new class of defect: a deployment that applied that advisory and considered camel-mail settled remained exposed on this path. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The MimeMultipart data format now applies the header filter on unmarshal, closing the path CVE-2026-46584 left open. For deployments that cannot upgrade immediately, strip the namespace after the data format with removeHeaders("mail.smtp*") before any mail producer. | 19 Oct |
| CVE-2026-49230exploit | 6.3 medium | 0.00% | apache, apisix | Improper Validation of Integrity Check Value vulnerability in Apache APISIX. The jwe-decrypt plugin under default configuration is vulnerable to authentication bypass. This issue affects Apache APISIX: from 3.8.0 through 3.16.0. Users are recommended to upgrade to version 3.17.0, which fixes the issue. | Sun 25 Oct |
| CVE-2026-44613exploit | 6.1 medium | 0.00% | apache, zeppelin | Cross-Site Request Forgery (CSRF) vulnerability in Apache Zeppelin. The default CORS configuration allowed cross-origin state-changing requests and accepted text/plain request bodies, allowing an attacker who lures an authenticated user to a malicious site to perform actions on the user's behalf through REST and WebSocket endpoints. This issue affects Apache Zeppelin versions 0.6.0 through 0.12.0. Users are recommended to upgrade to version 0.12.1, which fixes this issue. | Fri 23 Oct |
| CVE-2026-84178exploit | 6.1 medium | 0.00% | no CPE yet | Cross-Site Request Forgery (CSRF) vulnerability in Apache Camel OAuth component. This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1. The authorization code callback did not carry a state parameter binding it to the authorization request that started the flow, and the callback did not verify one. An authorization code obtained in any browser could therefore be redeemed at the callback and associated with whichever session presented it, which is login cross-site request forgery: a victim can be silently signed in as an identity the attacker controls, so that actions the victim then performs, and data they then submit, land in the attacker's account. The same unvalidated callback handling also allowed the post-authentication redirect target to be influenced, giving an open redirect from a trusted origin. The state check runs before the authorization code is redeemed, so these paths are reachable without any interaction with the identity provider. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The authorization request now issues a state value bound to the session, and the callback rejects a request whose state is absent or does not match, stopping the route with a 400 response. For deployments that cannot upgrade immediately, terminate the authorization code flow in a component that performs its own state binding rather than relying on the Camel callback. Note that after upgrading, a deployment behind a proxy that drops or rewrites the callback query string will begin to see 400 responses, because the state parameter must survive the round trip. | 19 Oct |
| CVE-2026-78163exploit | 5.9 medium | 0.00% | no CPE yet | Server-Side Request Forgery (SSRF), Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.1. DoclingProducer decided what a String message body meant by inspecting its prefix. A body starting with http:// or https:// was handed to Docling as a remote URL to fetch, a body starting with / or containing a backslash was read from the local filesystem, and anything else was written to a temporary file and converted as document content. The mode was chosen implicitly and no endpoint option allowed a route author to pin the component to a single interpretation, so a route that means convert whatever text arrives in the body silently became a fetcher of remote resources or a reader of local files whenever the text happened to begin with one of those prefixes. The only guard applied to the derived value was a size check, and that check was wrapped in an existence test, so a path that resolved to nothing, or to a pseudo-file reporting a size of zero, passed without being checked at all. Five call sites reached the two sinks: the CLI mode appended the value as the final positional argument of the docling subprocess, and the docling-serve mode passed it either to HttpSource for the backend to fetch or to Files.readAllBytes so that the content could be base64-encoded and uploaded. Because the exchange body is never filtered by a HeaderFilterStrategy, unlike the Camel header namespace, a sender able to place text in a message that a route forwards into a docling endpoint could reach both sinks without any opt-in from the deployment. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not route message bodies that originate outside the deployment into a docling endpoint, and pass the document through a typed body such as File, byte[] or InputStream, or through the CamelDoclingInputFilePath header, so that the body is never subject to prefix interpretation. | 19 Oct |
| CVE-2026-84181exploit | 5.9 medium | 0.00% | no CPE yet | Improper Authentication vulnerability in Apache Camel Shiro component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Shiro security processor skipped credential verification when the subject already bound to the current thread carried the same principal as the incoming exchange. Because the thread that carries a Camel exchange is drawn from a pool and reused across exchanges, a subject left bound by an earlier authenticated exchange could satisfy the check for a later one that presented no valid credentials of its own. The password on the incoming exchange was, in that case, never verified. The condition depends on thread reuse and on the principal matching, which is why it is not reached on every request, but it requires nothing of the attacker beyond sending a request naming a principal that is in active use. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processor now verifies the presented credentials on every exchange rather than accepting a subject already bound to the thread. Setting alwaysReauthenticate=false restores the previous behaviour for deployments that depend on it. For deployments that cannot upgrade immediately, ensure the Shiro subject is cleared from the thread at the end of every exchange so that no subject can be inherited by a later one. | 19 Oct |
| CVE-2026-85243exploit | 5.9 medium | 0.00% | no CPE yet | Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. unmarshal() verified the modification detection code only when the message was an OpenPGP symmetrically encrypted integrity protected data packet. The older symmetrically encrypted data packet carries no such code, and OpenPGP's CFB mode is malleable without one, so a message using that packet skipped the check altogether. The packet type is chosen by whoever produced the message, which left the sender - or anyone able to rewrite the message in transit - deciding whether the integrity check applied at all. The existing integrity option governs marshalling only and had no decrypt-side counterpart, so a deployment could not require integrity protection on the messages it accepted. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A requireIntegrityProtection option, defaulting to true, now rejects a message that is not integrity protected. Note that signatureVerificationOption still defaults to optional, so a message carrying no signature is accepted; the two options together are what give a decrypted message authenticity and not only confidentiality. For deployments that cannot upgrade immediately, reject messages that do not use the integrity protected packet before they reach the data format. Routes that must interoperate with a sender still emitting the legacy packet should set requireIntegrityProtection=false after upgrading, and treat the decrypted content as unauthenticated. | 19 Oct |
| CVE-2026-85245exploit | 5.9 medium | 0.00% | no CPE yet | Exposure of Data Element to Wrong Session vulnerability in Apache Camel Thrift component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Thrift data format unmarshalled incoming data into the shared defaultInstance of the target type rather than into a fresh copy, and returned that shared object as the exchange body. Because the instance is shared process-wide, state written while unmarshalling one message stayed on the object and was visible to every later message that used the same type. Fields absent from a later payload retained the previous message's values, so content belonging to one sender could be read while processing another sender's message, and concurrent exchanges could observe each other's partially written state. In a deployment that serves more than one tenant or user through the same route, that is disclosure of one party's data to another. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Unmarshalling now deserializes into a copy, so each exchange gets its own instance and no state carries between messages. For deployments that cannot upgrade immediately, copy the unmarshalled body into a new instance immediately after the data format runs, and do not retain references to the returned object. | 19 Oct |
| CVE-2026-85247exploit | 5.9 medium | 0.00% | no CPE yet | Improper Certificate Validation vulnerability in Apache Camel Knative component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When SSL was enabled on the Knative HTTP client but no truststore was configured, the client options fell back to trusting every presented certificate rather than to the JVM's default trust anchors. A deployment that switched TLS on without also configuring a truststore therefore obtained an encrypted connection with no peer authentication, which an attacker positioned on the network path can terminate and read. The dangerous state is reached by omission rather than by an explicit opt-in, which is what makes it a framework defect: turning TLS on should not be the thing that turns certificate validation off. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. With no truststore configured the trust options are now left unset so the JVM default trust anchors apply, the same fallback SSLContextParameters and the rest of Camel use. Trusting every certificate is now reached only by asking for it explicitly through the trust.all property, which remains available for development against a cluster with a self-signed certificate. For deployments that cannot upgrade immediately, configure a truststore explicitly wherever SSL is enabled. After upgrading, a deployment that was relying on the implicit trust-all behaviour must either configure a truststore or set the trust.all property deliberately. | 19 Oct |
| CVE-2026-85248exploit | 5.9 medium | 0.00% | no CPE yet | Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Apache Camel PQC component. This issue affects Apache Camel: from 4.12.0 before 4.18.5, from 4.19.0 before 4.22.1. The producer held a single java.security.Signature instance and used it for every exchange without synchronizing access. Signature is stateful and is not thread safe: update() accumulates the data to be signed or verified, and verify() consumes that accumulated state. With concurrent exchanges sharing one instance the update and verify calls of different messages interleave, so a verification can complete against data that belongs to another exchange, or against a partially accumulated buffer. The outcome is non-deterministic and includes a verification reporting success for a message whose signature was never actually checked, which defeats the guarantee the component exists to provide. Reaching it requires concurrent traffic through the same endpoint, which is the ordinary condition for a Camel route under load. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The Signature instance is no longer shared across concurrent exchanges. For deployments that cannot upgrade immediately, restrict the affected route to a single concurrent consumer so that no two exchanges use the instance at once. | 19 Oct |
| CVE-2026-85260exploit | 5.5 medium | 0.00% | no CPE yet | Insertion of Sensitive Information into Log File vulnerability in Apache Camel MLLP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-mllp component carries a logPhi option that governs whether HL7 payload content may be written to the log. It defaulted to true, so a deployment that did nothing logged protected health information out of the box. Two further paths wrote payload content to the log regardless of the setting, so even an operator who had turned logPhi off was still exposed on those paths. MLLP is used to carry HL7 clinical messages, so the content concerned is patient data, and it reached ordinary application logs where it is subject to whatever retention, aggregation and access the deployment applies to logs generally rather than to clinical records. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. logPhi now defaults to false and is honoured on the paths that previously ignored it. This is a changed default: a deployment that relied on payload logging must now set logPhi=true explicitly. Because the upgrade guide for a change like this lives on the main branch only, operators upgrading within the 4.18.x or 4.22.x lines should treat this advisory as the notice of that change. For deployments that cannot upgrade immediately, set logPhi=false and be aware that two paths will continue to log payload content until the fix is applied; restrict access to the logs accordingly. | 19 Oct |
| CVE-2026-85300exploit | 5.5 medium | 0.00% | no CPE yet | Incorrect Default Permissions vulnerability in Apache Camel PQC component. This issue affects Apache Camel: from 4.12.0 before 4.18.5, from 4.19.0 before 4.22.1. When the component wrote generated key material to disk it did so with the permissions the process default umask produced, rather than restricting the file to its owner. On a host whose umask allows group or world read, the private key was therefore readable by other local accounts. The exposure is to a local party rather than to the remote sender that the Camel threat model treats as the primary adversary, which is why the severity is assessed low, but the consequence where it applies is complete: possession of the private key defeats every signature and key exchange the deployment performs with it. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Key material is now written with owner-only permissions. For deployments that cannot upgrade immediately, place the key directory on a path only the service account can traverse, and tighten the process umask. Key material already written with permissive permissions should be treated as exposed and rotated. | 19 Oct |
| CVE-2026-60093exploit | 5.5 medium | 0.00% | apache, camel | Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them. | 12 Oct |
| CVE-2026-64640exploit | 5.3 medium | 0.00% | apache, polaris | Apache Polaris did not consistently validate storage locations supplied during table and view registration. An authenticated principal with permission to register a table or view could, depending on the affected release and registration path, cause Polaris to use the catalog's storage credentials to read a caller-selected Iceberg metadata file before verifying that the file was within the catalog's allowed storage locations. If the catalog's underlying credentials could read an object outside that boundary, this could disclose limited information from the object. Polaris could also accept registration metadata located within an allowed location that contained references to storage locations outside the allowed boundary. This second condition did not itself cause Polaris to read the referenced external locations during registration. The demonstrated impact is limited to confidentiality. No unauthorized data modification or availability impact has been demonstrated. The server-side read requires a deployment using S3 credential vending and an object outside the allowed locations that the catalog's underlying storage credentials can read. Exploitation requires an authenticated principal with table- or view-registration privileges. | Sat 24 Oct |
| CVE-2026-84180exploit | 5.3 medium | 0.00% | no CPE yet | Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller. | 19 Oct |
| CVE-2026-85246exploit | 5.3 medium | 0.00% | no CPE yet | Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Mina component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When processing of an exchange failed, the Mina consumer wrote exchange.getException() straight back over the socket to the remote peer. Over a textline codec that hands the peer the exception's class name and message; over the object codec it hands over the serialised exception, cause chain included. A remote peer able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever a message or nested cause happens to carry, which in practice can include paths, host names and connection detail. The consumer had no option to suppress this, unlike the HTTP-family consumers aligned by CAMEL-23651. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces the route exception with a generic one carrying no class name, message or stack trace, while still writing a reply so that a synchronous peer is not left to time out. Set muteException=false to restore the previous behaviour. For deployments that cannot upgrade immediately, add an onException handler that sets the reply body explicitly, so the framework never writes the exception back to the peer. | 19 Oct |
| CVE-2026-85257exploit | 5.3 medium | 0.00% | no CPE yet | Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CXF component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When a route behind a CXF SOAP consumer failed with an exception the service contract does not declare, the exception was described back to the SOAP client in the fault: CXF copies the message into the SOAP faultstring, and can be configured to place the stack trace in the fault detail. An external caller able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever the exception message carries. Declared faults, annotated @WebFault, are a different matter: those are part of the published contract that clients are written against, and suppressing them would break the service rather than protect anything. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces an undeclared route failure with a generic fault carrying no class name, message or stack trace. Faults the contract declares are reported exactly as before. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, declare the exceptions the service is allowed to report and map every other failure onto one of them in an onException handler, so no undeclared exception reaches the fault. | 19 Oct |
| CVE-2026-85315exploit | 5.3 medium | 0.00% | no CPE yet | Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel gRPC component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When a route behind a gRPC consumer failed, the exception's message was placed into the gRPC status description. Unlike the status cause, which stays local to the server, the description is transmitted to the calling client, so an external caller able to provoke a failure could read the internal error message. What that discloses depends on the exception, and in practice includes class and package names, paths, host names and connection detail carried in messages. This is the gRPC member of the same unmuted-consumer-exception family as the knative, mina and CXF advisories published alongside it. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, puts a generic description in the status instead of the route exception's message. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, map failures onto an explicit status in an onException handler so the framework never copies the exception message into the description. | 19 Oct |
| CVE-2026-85301exploit | 4.8 medium | 0.00% | no CPE yet | Improper Authentication vulnerability in Apache Camel Keycloak component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.1. The security processor validated the issuer of an introspected token only when the introspection response actually carried an iss claim. When the claim was absent the check was skipped rather than treated as a failure, so a token that the configured issuer did not mint could be accepted provided the introspection endpoint answered without naming an issuer. Reaching this requires an introspection endpoint that omits iss and accepts tokens from more than one issuer, which is not the default Keycloak arrangement, hence the low severity; where that arrangement exists the consequence is that the deployment authenticates a caller it should have rejected. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. An absent iss claim is now treated as a validation failure rather than as a reason to skip the check. For deployments that cannot upgrade immediately, ensure the introspection endpoint returns the iss claim, and that it serves exactly one issuer. | 19 Oct |
| CVE-2026-85312exploit | 4.8 medium | 0.00% | no CPE yet | Improper Input Validation vulnerability in Apache Camel Core component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The saga processor consulted a header named Long-Running-Action to decide which saga an exchange belonged to. The name carries no Camel prefix, so it sits outside the namespace that consumer header filters block, and an external sender could supply it on an inbound message. That let the sender name the saga the exchange joined, attaching their request to a long-running action started by someone else, or causing compensation to be associated with an action they did not initiate. The header is only consulted by a saga service that uses it, which bounds the exposure to deployments running sagas over an LRA coordinator. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The header is now consulted only for a saga service that actually uses it, rather than on every exchange. For deployments that cannot upgrade immediately, strip the header at the trust boundary with removeHeaders("Long-Running-Action") on every consumer that accepts messages from an untrusted sender. | 19 Oct |
| CVE-2026-85316exploit | 4.8 medium | 0.00% | no CPE yet | Insufficient Granularity of Access Control vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The component decided whether an endpoint ran in proxy mode by testing whether its configured path started with the string proxy, rather than by matching the path exactly. Any endpoint whose path merely begins with those characters - proxyStatus, proxy-config, proxying and so on - therefore became a proxy endpoint without the route author asking for it. A proxy endpoint forwards requests onward, so an endpoint that was intended to serve its own content instead relays traffic on behalf of whoever calls it, which is both a request forgery primitive and an exposure of whatever the forwarding path can reach. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Proxy mode is now selected by an exact path match rather than by prefix. For deployments that cannot upgrade immediately, rename any endpoint path that begins with proxy but is not intended to be a proxy. | 19 Oct |
| CVE-2026-85317exploit | 4.8 medium | 0.00% | no CPE yet | Use of Cache Containing Sensitive Information vulnerability in Apache Camel HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The OAuth2 client token cache is global to the JVM, and its key omitted several of the fields that determine what a token actually authorises: the requested scope, the resource indicator, and the token endpoint the token was obtained from. Two endpoints differing only in those fields therefore shared a cache entry, and an endpoint could be served a token minted for a different scope, a different resource, or by a different authorization server. The consequence is a request carrying broader authority than the endpoint was configured for, or a token presented to a party it was not issued for. Reaching it requires a deployment that configures more than one OAuth2 endpoint differing in exactly those fields, which is why the severity is assessed low. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The cache key now includes every field that shapes the token, so entries are no longer shared between endpoints that differ in any of them. For deployments that cannot upgrade immediately, run endpoints that differ in scope, resource indicator or token endpoint in separate JVMs so that they do not share the cache. | 19 Oct |
| CVE-2026-85313exploit | 4.3 medium | 0.00% | no CPE yet | Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Jetty component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Setting enableCORS on a Jetty endpoint installed Jetty's CrossOriginFilter with its stock defaults, which accept every origin and allow credentials. An operator asking for CORS therefore obtained a policy that lets a page on any origin make credentialed cross-origin requests to the endpoint and read the responses, without any indication that turning the option on had chosen an allow-all policy rather than an empty one to be filled in. This is the same defect class as the platform-http-vertx advisory published alongside it, in a different component. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. enableCORS no longer grants credentials to an origin the operator did not name. A deployment that relied on any origin being accepted must now list its origins explicitly. For deployments that cannot upgrade immediately, configure the CrossOriginFilter parameters explicitly rather than relying on what enableCORS installs, naming the allowed origins. | 19 Oct |
146 of 146 · Previous
Download these 146 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.