Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-54406 | 8.8 high | 4.0% | planet, wgr-500_firmware | Multiple OS command injection vulnerabilities exist in the formPingCmd functionality of Planet WGR-500 v1.3411b190912. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `counts` request parameter. | 8 Oct |
| CVE-2021-20232 | 9.8 critical | 3.0% | gnu, redhat, gnutls, enterprise_linux, fedora | A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences. | 14 Oct |
| CVE-2026-113802 | 9.3 critical | 3.0% | no CPE yet | Wavlink WL-WN530BE1-A firmware through M30BE1_V251117 contains an OS command injection vulnerability in the sub_23B54 function of the ioos binary, which passes the unsanitized file_id parameter of /protocol.csp?opt=ovpn_file requests with type=del to popen(). A remote unauthenticated attacker can send a forged IP-FROM: 127.0.0.1 header to bypass login and execute arbitrary commands as root. | 21 Oct |
| CVE-2026-12486 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_IP_Addr command injection The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = ip_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address system(v4); return 1; } | Sun 25 Oct |
| CVE-2026-12849 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Net_Mask command injection The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = netmask_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr system(v4); return 1; } | Sun 25 Oct |
| CVE-2026-12850 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Gate_way command injection The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev) { char s[324]; // [sp+4h] [bp-144h] BYREF if ( !dev && !*this || !gw ) return 0; system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0"); system("/sbin/route del default "); if ( dev ) sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string else sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string system(s); sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string system(s); return 1; } | Sun 25 Oct |
| CVE-2026-12851 | 9.1 critical | 3.0% | no CPE yet | Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_DNS_Addr command injection The following function can take up to two addresses, performs no sanitization and then calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_DNS_Addr(CNetSetObj *this, char *dns1, char *dns2) { int result; // r0 char v5[80]; // [sp+0h] [bp-50h] BYREF if ( !dns1 ) result = 0; if ( dns1 ) { sprintf(v5, "/bin/echo nameserver %s > /etc/resolv.conf", dns1); // attacker controlled dns1 field system(v5); if ( dns2 ) { sprintf(v5, "/bin/echo nameserver %s >> /etc/resolv.conf", dns2); system(v5); } return 1; } return result; | Sun 25 Oct |
| CVE-2019-3863 | 8.8 high | 3.0% | libssh2, debian, debian_linux, ontap_select_deploy_administration_utility | A flaw was found in libssh2 before 1.8.1 creating a vulnerability on the SSH client side. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used by the SSH client as an index to copy memory causing in an out of bounds memory write error. | 14 Oct |
| CVE-2025-34334 | 8.7 high | 3.0% | audiocodes, fax_server, interactive_voice_response | AudioCodes Fax Server and Auto-Attendant IVR appliances versions up to and including 2.6.23 are vulnerable to an authenticated command injection in the fax test functionality implemented by AudioCodes_files/TestFax.php. When a fax "send" test is requested, the application builds a faxsender command line using attacker-supplied parameters and passes it to GlobalUtils::RunBatchFile without proper validation or shell-argument sanitization. The resulting batch file is written into a temporary run directory and then executed via a backend service that runs as NT AUTHORITY\\SYSTEM. An authenticated attacker with access to the fax test interface can craft parameter values that inject additional shell commands into the generated batch file, leading to arbitrary command execution with SYSTEM privileges. In addition, because the generated batch files reside in a location with overly permissive file system permissions, a local low-privilege user on the server can modify pending batch files to achieve the same elevation. | 18 Oct |
| CVE-2026-85431 | 8.7 high | 3.0% | themoos, essential-moos | MOOS essential-moos through version 10.0.1 contains an unauthenticated UDP packet injection vulnerability in pMOOSBridge when configured with UDPListen. Attackers can send crafted UDP packets to the configured port to inject arbitrary variables into the local MOOS community with spoofed source and community identifiers. | 14 Oct |
| CVE-2020-25709 | 7.5 high | 3.0% | openldap, debian, debian_linux, mac_os_x | A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP’s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability. | 14 Oct |
| CVE-2020-6079 | 7.5 high | 3.0% | videolabs, debian, libmicrodns, debian_linux | An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through decoding of the domain name performed by rr_decode. | 8 Oct |
| CVE-2020-6078 | 7.5 high | 3.0% | videolabs, debian, libmicrodns, debian_linux | An exploitable denial-of-service vulnerability exists in the message-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing mDNS messages in mdns_recv, the return value of the mdns_read_header function is not checked, leading to an uninitialized variable usage that eventually results in a null pointer dereference, leading to service crash. An attacker can send a series of mDNS messages to trigger this vulnerability. | 8 Oct |
| CVE-2020-6077 | 7.5 high | 3.0% | videolabs, debian, libmicrodns, debian_linux | An exploitable denial-of-service vulnerability exists in the message-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing mDNS messages, the implementation does not properly keep track of the available data in the message, possibly leading to an out-of-bounds read that would result in a denial of service. An attacker can send an mDNS message to trigger this vulnerability. | 8 Oct |
| CVE-2020-6073 | 7.5 high | 3.0% | videolabs, debian, libmicrodns, debian_linux | An exploitable denial-of-service vulnerability exists in the TXT record-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing the RDATA section in a TXT record in mDNS messages, multiple integer overflows can be triggered, leading to a denial of service. An attacker can send an mDNS message to trigger this vulnerability. | 8 Oct |
| CVE-2020-6071 | 7.5 high | 3.0% | videolabs, debian, libmicrodns, debian_linux | An exploitable denial-of-service vulnerability exists in the resource record-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing compressed labels in mDNS messages, the compression pointer is followed without checking for recursion, leading to a denial of service. An attacker can send an mDNS message to trigger this vulnerability. | 8 Oct |
| CVE-2021-22947 | 5.9 medium | 3.0% | haxx, fedoraproject, curl, fedora, debian_linux | When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker's injected data comes from the TLS-protected server. | 14 Oct |
| CVE-2022-27779 | 5.3 medium | 3.0% | haxx, netapp, curl, hci_bootstrap_os, clustered_data_ontap | libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl's "cookie engine" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain. | 14 Oct |
| CVE-2026-116485 | 9.3 critical | 2.0% | no CPE yet | danmu_api before 1.21.7 contains an authentication bypass vulnerability that allows unauthenticated attackers to modify server environment configuration when the default TOKEN is used and ADMIN_TOKEN is unset. Attackers can send POST requests to /api/env/set, /api/env/add, or /api/env/del to set ADMIN_TOKEN, lock out operators, redirect OTHER_SERVER or PROXY_URL for SSRF, and trigger redeployment. | Mon 26 Oct |
| CVE-2021-48014 | 9.3 critical | 2.0% | no CPE yet | FineReport 9.0 contains a path traversal vulnerability in the /WebReport/ReportServer design_save_svg operation that allows unauthenticated attackers to write arbitrary files via the filePath parameter. Attackers can send a POST request with directory traversal sequences in filePath and a __CONTENT__ payload to write a JSP webshell and achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-14. | Fri 23 Oct |
| CVE-2018-25357 | 9.3 critical | 2.0% | dolibarr, dolibarr_erp\/crm | Dolibarr ERP CRM 7.0.3 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary code by injecting PHP code through the db_name parameter. Attackers can send a POST request to install/step1.php with malicious PHP code in the db_name parameter, then execute commands via the check.php endpoint using the cmd GET parameter. | 8 Oct |
| CVE-2026-116067 | 8.8 high | 2.0% | no CPE yet | Paisa before 0.7.8 contains a path traversal vulnerability in the GetFile, GetSheet, DeleteBackups, and DeleteSheetBackups handlers that lets unauthenticated attackers read files and delete backups through ../ sequences in file names. Attackers can send crafted names to the editor file and delete_backups endpoints to read any server-readable file and remove backup files outside the journal or sheets directory. | Mon 26 Oct |
| CVE-2023-27533 | 8.8 high | 2.0% | haxx, fedoraproject, curl, fedora, active_iq_unified_manager | A vulnerability in input validation exists in curl <8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and "telnet options" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application's intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system. | 14 Oct |
| CVE-2026-85430 | 8.8 high | 2.0% | themoos, essential-moos | MOOS essential-moos through 10.0.1 contains an authentication bypass vulnerability in pShare that accepts UDP datagrams from any source and republishes them with the attacker-claimed identity intact. Attackers can send crafted UDP datagrams to pShare input routes to inject messages into the local MOOS community under spoofed identities, or send malformed datagrams to crash the pShare process. | 14 Oct |
| CVE-2026-94450 | 8.7 high | 2.0% | no CPE yet | Improper validation of the Destination Connection ID length in s2n-quic 1.88.0 and earlier may allow an unauthenticated remote user to cause a denial of service by shutting down a server endpoint via a single crafted UDP datagram. Only server endpoints specifically configured to send Retry packets are affected. To remediate this issue, users should upgrade to version v1.89.0 or later. | 20 Oct |
| CVE-2026-85436 | 8.7 high | 2.0% | themoos, essential-moos | MOOS essential-moos through 10.0.1 contains a buffer overflow vulnerability in CMOOSUDPLink::ReadPktFromArray() that allows remote attackers to corrupt heap memory by sending UDP datagrams with negative declared lengths. Attackers can send crafted UDP packets to the configured UDPListen port to trigger an oversized memcpy operation that writes past the destination buffer, causing heap corruption and denial of service. | 14 Oct |
| CVE-2013-20007 | 8.6 high | 2.0% | no CPE yet | Linksys WAG200G through 1.01.06 contains an OS command injection vulnerability that allows authenticated attackers to execute commands by injecting backtick-delimited input into the timer_interval parameter. Attackers can send a crafted POST request to setup.cgi to start telnetd or download and run a backdoor, gaining full device control. | Wed 28 Oct |
| CVE-2026-12609 | 7.5 high | 2.0% | eclipse, theia | In Eclipse Theia versions 1.66.0 and up until including 1.73.1, the `@theia/plugin-ext` backend exposes the `/hostedPlugin/:pluginId/:path(*)` HTTP endpoint, which resolves the requested file path with `path.resolve(localPath, filePath)` without verifying that the resolved path stays within the plugin's directory. An unauthenticated network attacker can send percent-encoded `../` sequences (`%2e%2e%2f`) that decode into the path parameter and escape the plugin directory, allowing arbitrary files readable by the Theia backend process to be retrieved. Plugin IDs are derived deterministically from a plugin's publisher and name, so built-in plugins serve as reliable anchors that require no prior knowledge of the target system. | 23 Oct |
| CVE-2026-3497 | 6.9 medium | 2.0% | canonical, openbsd, ubuntu_linux, openssh, debian_linux | Vulnerability in the OpenSSH GSSAPI delta included in various Linux distributions. This vulnerability affects the GSSAPI patches added by various Linux distributions and does not affect the OpenSSH upstream project itself. The usage of sshpkt_disconnect() on an error, which does not terminate the process, allows an attacker to send an unexpected GSSAPI message type during the GSSAPI key exchange to the server, which will call the underlying function and continue the execution of the program without setting the related connection variables. As the variables are not initialized to NULL the code later accesses those uninitialized variables, accessing random memory, which could lead to undefined behavior. The recommended workaround is to use ssh_packet_disconnect() instead, which does terminate the process. The impact of the vulnerability depends heavily on the compiler flag hardening configuration. | 15 Oct |
| CVE-2002-0109 | 6.4 medium | 2.0% | linksys, befn2ps4, befsr41, befsr81 | Linksys EtherFast BEFN2PS4, BEFSR41, and BEFSR81 Routers, and possibly other products, allow remote attackers to gain sensitive information and cause a denial of service via an SNMP query for the default community string "public," which causes the router to change its configuration and send SNMP trap information back to the system that initiated the query. | 9 Oct |
| CVE-2023-6121 | 4.3 medium | 2.0% | redhat, enterprise_linux | An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg). | 14 Oct |
| CVE-2023-28322 | 3.7 low | 2.0% | haxx, fedoraproject, curl, fedora, macos | An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST. | Fri 23 Oct |
| CVE-2026-12846 | 10.0 critical | 1.0% | no CPE yet | GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Net Mask field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v6 = strlen(g_network_config->net_mask); memcpy(&reply_buf[184], g_network_config->net_mask, v6); | Sun 25 Oct |
| CVE-2026-12847 | 10.0 critical | 1.0% | no CPE yet | GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Gateway field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v7 = strlen(g_network_config->gateway); memcpy(&reply_buf[216], g_network_config->gateway, v7); | Sun 25 Oct |
| CVE-2026-12848 | 10.0 critical | 1.0% | no CPE yet | GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### DNS field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v8 = strlen(g_network_config->dns_addr); memcpy(&reply_buf[248], g_network_config->dns_addr, v8); | Sun 25 Oct |
| CVE-2026-105944 | 10.0 critical | 1.0% | no CPE yet | Apache Pulsar Manager is a web console for administering Apache Pulsar clusters. It has its own user accounts and login, and it can be configured with an HTTP authentication credential, such as a token, that it uses to call the Pulsar admin API on behalf of its users. Pulsar Manager has the following security issues: - The operation for creating the initial administrator (superuser) account is available without authentication, and it remains available after the instance has been initialized. Anyone who can reach Pulsar Manager can create an additional administrator account at any time and log in with it. This issue affects versions 0.3.0 and later. - Requests to the Pulsar admin API that Pulsar Manager proxies to the configured Pulsar cluster are not subject to Pulsar Manager's authentication. Version 0.2.0 checks the caller's permissions for some of these requests, but not for all of them. An unauthenticated user can therefore use Pulsar Manager to send requests to the Pulsar admin API, which the cluster processes with the credential configured in Pulsar Manager. - The destination of a proxied request can be chosen by the requester, and Pulsar Manager attaches its configured Pulsar admin credential to the request. An unauthenticated user can make Pulsar Manager send this credential to a host of the user's choosing, and the credential can then be used directly against the Pulsar cluster. - In versions 0.3.0 and later, Pulsar Manager does not distinguish between privilege levels of its accounts. Every account, including one created through the first issue, effectively has full administrative privileges in Pulsar Manager. The impact depends on the version and the deployment. In versions 0.3.0 and later, any user who can reach Pulsar Manager over the network can take full control of Pulsar Manager. In all versions, when Pulsar Manager is configured with an HTTP authentication credential for a Pulsar cluster, any user who can reach Pulsar Manager can perform the Pulsar admin operations that this credential permits and can obtain the credential itself. When Pulsar Manager is configured with the token signing key of a Pulsar cluster, an administrator of Pulsar Manager can create tokens for the cluster. Apache Pulsar Manager is no longer maintained and is completely unsupported. The Apache Pulsar PMC has retired it. There are no supported versions, and no further releases, fixes or security updates will be made for any version. These issues will not be fixed. Using Pulsar Manager is not recommended. Users should stop using Pulsar Manager, remove existing deployments, and move to one of the alternatives described in the Administration UI documentation (https://pulsar.apache.org/docs/administration-ui). Users who have exposed Pulsar Manager configured with a Pulsar credential or token signing key should also consider replacing that credential or key. Until a deployment is removed, users should not expose Pulsar Manager to untrusted networks, and should restrict network access to it to trusted administrators. | Fri 23 Oct |
| CVE-2026-110130 | 10.0 critical | 1.0% | no CPE yet | Dockhand before 1.0.45 contains an authentication bypass in which the global auth hook skips authentication for any path ending in a static-asset extension such as .js, including /api/* routes, and the user-mutation handlers fail open for unauthenticated callers. Unauthenticated remote attackers can send a PUT request to /api/users/<id>.js to reset the admin's or any user's password and take over the account. | 14 Oct |
| CVE-2025-68667 | 9.9 critical | 1.0% | no CPE yet | Conduit is a chat server powered by Matrix. A vulnerability that affects a number of Conduit-derived homeservers allows a remote, unauthenticated attacker to force the target server to cryptographically sign arbitrary membership events. Affected products include Conduit prior to version 0.10.10, continuwuity prior to version 0.5.0, Grapevine prior to commit `9a50c244`, and tuwunel prior to version 1.4.8. The flaw exists because the server fails to validate the origin of a signing request, provided the event's state_key is a valid user ID belonging to the target server. Attackers can forge "leave" events for any user on the target server. This forcibly removes users (including admins and bots) from rooms. This allows denial of service and/or the removal of technical protections for a room (including policy servers, if all users on the policy server are removed). Attackers can forge "invite" events from a victim user to themselves, provided they have an account on a server where there is an account that has the power level to send invites. This allows the attacker to join private or invite-only rooms accessible by the victim, exposing confidential conversation history and room state. Attackers can forge "ban" events from a victim user to any user below the victim user's power level, provided the victim has the power level to issue bans AND the target of the ban resides on the same server as the victim. This allows the attacker to ban anyone in a room who is on the same server as the vulnerable one, however cannot exploit this to ban users on other servers or the victim themself. Conduit fixes the issue in version 0.10.10. continuwuity fixes the issue in commits `7fa4fa98` and `b2bead67`, released in 0.5.0. tuwunel fixes the issue in commit `dc9314de1f8a6e040c5aa331fe52efbe62e6a2c3`, released in 1.4.8. Grapevine fixes the issue in commit `9a50c2448abba6e2b7d79c64243bb438b351616c`. As a workaround, block access to the `PUT /_matrix/federation/v2/invite/{roomId}/{eventId}` endpoint using your reverse proxy. | 19 Oct |
| CVE-2026-74401 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dlm: fix add msg handle in send_queue ordered In a benchmark scenario triggering a lot of requests that triggers a lot of DLM messages on the network it can be that the mh->seq is not ordered according the oldest seq number. This ordering is required by dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older sequence numbers that are ordered in the tail of "node->send_queue". The side effects of not having it correct ordered regarding "before(mh->seq, seq)" are refcounting issues and use-after free. I only was able to reproduce this issue in a experimental DLM branch and a user space DLM benchmark that uses io_uring. After changing this I don't experienced any refcounting with the sending buffer issues anymore. | 9 h ago |
| CVE-2026-47391 | 9.8 critical | 1.0% | no CPE yet | PraisonAI is a multi-agent teams system. Prior to version 4.6.40, PraisonAI's first-party A2A server example exposes an unauthenticated A2A JSON-RPC endpoint and registers a `calculate(expression)` tool implemented with Python `eval()`. The example also binds to `0.0.0.0`. A remote unauthenticated attacker can send `message/send` to `/a2a`; the request reaches `agent.chat()`, and a real LLM can invoke the registered `calculate` tool. In testing with `gemini/gemini-2.5-flash-lite`, this resulted in arbitrary Python execution in the server process, confirmed by creation of a marker file from an unauthenticated HTTP request. The issue affects deployments following the official A2A example or similar unauthenticated public A2A deployments with unsafe tools. The default unauthenticated A2A surface also exposes task history and task cancellation APIs, increasing confidentiality and integrity impact. Version 4.6.40 patches the issue. | Sat 24 Oct |
| CVE-2023-2186 | 9.8 critical | 1.0% | trianglemicroworks, scada_data_gateway | On Triangle MicroWorks' SCADA Data Gateway version <= v5.01.03, an unauthenticated attacker can send a specially crafted broadcast message including format string characters to the SCADA Data Gateway to perform unrestricted memory reads.An unauthenticated user can use this format string vulnerability to repeatedly crash the GTWWebMonitor.exe process to DoS the Web Monitor. Furthermore, an authenticated user can leverage this vulnerability to leak memory from the GTWWebMonitor.exe process. This could be leveraged in an exploit chain to gain code execution. | Fri 23 Oct |
| CVE-2026-15435 | 9.8 critical | 1.0% | ibm, app_connect_enterprise | IBM App Connect Enterprise 13.0.1.0 through 13.0.7.2, and 12.0.1.0 through 12.0.12.27 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to write arbitrary files on the system. | Fri 23 Oct |
| CVE-2026-104252 | 9.8 critical | 1.0% | linuxfoundation, vitess | Vitess is a database clustering system for horizontal scaling of MySQL. Prior to 23.0.5 and 24.0.2, twopczHandler in go/vt/vttablet/tabletserver/twopcz.go writes the Action and dtid form values from the vttablet and vtcombo /twopcz HTTP debug endpoint into a text/html response without HTML escaping. Under the default allow-all ACL policy, a remote unauthenticated attacker can send an operator a crafted request that executes script in the operator's browser after the request is opened. The script runs with the vttablet debug origin and can read same-origin diagnostic endpoints that expose query, transaction, environment, variable, or profiling data available in that deployment. This issue is fixed in versions 23.0.5 and 24.0.2. | 23 Oct |
| CVE-2026-43185 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix signededness bug in smb_direct_prepare_negotiation() smb_direct_prepare_negotiation() casts an unsigned __u32 value from sp->max_recv_size and req->preferred_send_size to a signed int before computing min_t(int, ...). A maliciously provided preferred_send_size of 0x80000000 will return as smaller than max_recv_size, and then be used to set the maximum allowed alowed receive size for the next message. By sending a second message with a large value (>1420 bytes) the attacker can then achieve a heap buffer overflow. This fix replaces min_t(int, ...) with min_t(u32) | 21 Oct |
| CVE-2026-89654 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in check_new_map() on session freed during unlock check_new_map() iterates mdsc->sessions[] and for each active session drops mdsc->mutex to perform per-session operations. The forced-close path (rank removed from map) correctly takes a reference on s via ceph_get_mds_session() before releasing mdsc->mutex, but three other paths do not: Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex) Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s) Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex) Without the extra reference, another thread can acquire mdsc->mutex during the unlock window, call __unregister_session() which drops the last reference on s, and free it. The original thread then accesses freed memory via s->s_mutex. Fix by adding ceph_get_mds_session(s) before each mutex_unlock and ceph_put_mds_session(s) after the corresponding mutex_lock, matching the pattern already used in the forced-close path. Race timeline (Path A): Thread A (check_new_map) Thread B (another map update holds mdsc->mutex or session teardown) -------------------------- -------------------------- s = mdsc->sessions[i] (refcount == 1, held only by sessions[] array) mutex_unlock(&mdsc->mutex) ---> acquires mdsc->mutex __unregister_session(mdsc, s) sessions[i] = NULL ceph_put_mds_session(s) refcount: 1 -> 0 kfree(s) <--- freed! mutex_lock(&s->s_mutex) UAF on freed s->s_mutex | 21 Oct |
| CVE-2026-72041 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: espintcp: use sk_msg_free_partial to fix partial send sk_msg_free_partial() ensures consistency of the skmsg at every iteration, without having to manually handle uncharges and offsets. This simplifies the code, and fixes some bugs in skmsg accounting when we don't send the full contents. | 19 Oct |
| CVE-2026-64268 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | 19 Oct |
| CVE-2026-64102 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. | 19 Oct |
| CVE-2026-53176 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject any login PDU shorter than ISER_HEADERS_LEN before the subtraction, mirroring the existing early return on a failed work completion, so login_req_len can never go negative. The upper bound was already safe: a posted login buffer cannot deliver more than ISER_RX_PAYLOAD_SIZE, so the difference stays at or below MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing lower bound needs to be added. | 19 Oct |
| CVE-2026-43186 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). | 19 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.