Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-72367 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iomap: guard io_size EOF trim against concurrent truncate underflow iomap: fix zero padding data issue in concurrent append writes changed ioend accounting so that io_size tracks only valid data within EOF. This trims io_size when a writeback range extends past end_pos: ioend->io_size += map_len; if (ioend->io_offset + ioend->io_size > end_pos) ioend->io_size = end_pos - ioend->io_offset; However, if end_pos ends up below ioend->io_offset, the subtraction becomes negative and is stored in size_t io_size, causing an unsigned wrap to a huge value. This can happen when writeback continues past byte-level EOF up to a block-aligned range, or when a concurrent truncate shrinks the file after end_pos was sampled in iomap_writeback_handle_eof(). A wrapped io_size can mislead append detection and corrupt completion-time size handling, since filesystem end_io paths consume io_size for decisions such as on-disk EOF updates and unwritten/COW completion ranges. Fix this by clamping io_size to zero when EOF has moved to or before the ioend start offset. This preserves the original intent of trimming io_size to valid in-EOF data while avoiding the underflow. | 21 Oct |
| CVE-2026-12894 | 8.8 high | 1.0% | no CPE yet | A flaw was found in the Qute template engine, which is used by Quarkus to generate dynamic content like HTML pages or emails. The issue exists in the component responsible for looking up data values (ReflectionValueResolver), which fails to properly block access to sensitive Java internal functions when processing certain data types like Enums. An attacker who can provide or influence the template text can exploit this bypass to take control of the server by executing unauthorized commands. | 20 Oct |
| CVE-2025-13536 | 8.8 high | 1.0% | no CPE yet | The Blubrry PowerPress plugin for WordPress is vulnerable to arbitrary file uploads due to insufficient file type validation in all versions up to, and including, 11.15.2. This is due to the plugin validating file extensions but not halting execution when validation fails in the 'powerpress_edit_post' function. This makes it possible for authenticated attackers, with Contributor-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 19 Oct |
| CVE-2026-89493 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate rl_used against rl_count in refcount block validator ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array with: for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) { rec = &rb->rf_records.rl_recs[i]; ... rl_recs[] lives in a single metadata block (4096 bytes on the common configuration), so its real capacity is fixed by ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the 16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly off disk by ocfs2_validate_refcount_block() and are never checked against that capacity, nor against each other, before any refcount/reflink/CoW operation walks the array. A crafted (or corrupted) refcount block with rl_used == 0xffff makes the loop above walk far past the end of the block, dereferencing rl_recs[i] for i up to 65534. The resulting index is then handed to the sibling ocfs2_insert_refcount_rec(), whose insert-shift does: if (index < le16_to_cpu(rf_list->rl_used)) memmove(&rf_list->rl_recs[index + 1], &rf_list->rl_recs[index], (le16_to_cpu(rf_list->rl_used) - index) * sizeof(struct ocfs2_refcount_rec)); i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an offset already past the block. This is reachable from an ordinary reflink (FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent whose cpos sorts past every real record in the leaf forces the lookup to run off the end instead of returning early on a match. The attacker model is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a raw write to the block device backing an already-mounted ocfs2 filesystem. ocfs2_validate_refcount_block() already validates the block's ECC, signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used against the block's actual on-disk capacity. This is the same class of gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes for the sibling extent-list header, which checks both the record capacity and the "used" bound before any code walks h_list.l_recs[]: if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) { rc = ocfs2_error(...); goto bail; } if (le16_to_cpu(eb->h_list.l_next_free_rec) > le16_to_cpu(eb->h_list.l_count)) { rc = ocfs2_error(...); goto bail; } Add the equivalent pair of checks to ocfs2_validate_refcount_block(): reject a refcount block whose rl_count does not match the fixed per-block capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used > rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set, because in that case the same union bytes hold an ocfs2_extent_list (rf_list), not the refcount record list (rf_records) -- that layout is already validated separately by ocfs2_validate_extent_block() when the referenced extent block is read. This mirrors the existing "!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or rf_list is the live member of the union. With this in place, a forged rl_used/rl_count is caught at block validation time (ocfs2_error()), consistent with every other corruption check in this function, instead of driving an out-of-bounds read in ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove() in ocfs2_insert_refcount_rec(). Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build: replaying the same reflink (FICLONE) reliably hit a KASAN report in __ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch, and triggers no report once ocfs2_validate_refcount_block() rejects the forged rl_used/rl_count. | 19 Oct |
| CVE-2025-11920 | 8.8 high | 1.0% | no CPE yet | The WPCOM Member plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.7.14 via the action parameter in one of its shortcodes. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | 18 Oct |
| CVE-2025-11755 | 8.8 high | 1.0% | no CPE yet | The WP Delicious – Recipe Plugin for Food Bloggers (formerly Delicious Recipes) plugin for WordPress is vulnerable to arbitrary file uploads when importing recipes via CSV in all versions up to, and including, 1.9.0. This flaw allows an attacker with at least Contributor-level permissions to upload a malicious PHP file by providing a remote URL during a recipe import process, leading to Remote Code Execution (RCE). | 18 Oct |
| CVE-2025-6990 | 8.8 high | 1.0% | no CPE yet | The kallyas theme for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.24.0 via the `TH_PhpCode` pagebuilder widget. This is due to the theme not restricting access to the code editor widget for non-administrators. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server. | 18 Oct |
| CVE-2025-10896 | 8.8 high | 1.0% | no CPE yet | Multiple plugins for WordPress with the Jewel Theme Recommended Plugins Library are vulnerable to Unrestricted Upload of File with Dangerous Type via arbitrary plugin installation in all versions up to, and including, 1.0.2.3. This is due to missing capability checks on the '*_recommended_upgrade_plugin' function which allows arbitrary plugin URLs to be installed. This makes it possible for authenticated attackers with subscriber-level access and above to upload arbitrary plugin packages to the affected site's server via a crafted plugin URL, which may make remote code execution possible. | 18 Oct |
| CVE-2025-11724 | 8.8 high | 1.0% | no CPE yet | The EM Beer Manager plugin for WordPress is vulnerable to arbitrary file upload leading to remote code execution in all versions up to, and including, 3.2.3. This is due to missing file type validation in the EMBM_Admin_Untappd_Import_image() function and missing authorization checks on the wp_ajax_embm-untappd-import action. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload arbitrary files including PHP files and execute code on the server granted they can provide a mock HTTP server that responds with specific JSON data. | 18 Oct |
| CVE-2025-12637 | 8.8 high | 1.0% | no CPE yet | The Elastic Theme Editor plugin for WordPress is vulnerable to arbitrary file uploads due to a dynamic code generation feature in the process_theme function in all versions up to, and including, 0.0.3. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-12846 | 8.8 high | 1.0% | no CPE yet | The Blocksy Companion plugin for WordPress is vulnerable to authenticated arbitrary file upload in all versions up to, and including, 2.1.19. This is due to insufficient file type validation detecting SVG files, allowing double extension files to bypass sanitization while being accepted as a valid SVG file. This makes it possible for authenticated attackers, with author level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-12733 | 8.8 high | 1.0% | no CPE yet | The Import any XML, CSV or Excel File to WordPress (WP All Import) plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 3.9.6. This is due to the use of eval() on unsanitized user-supplied input in the pmxi_if function within helpers/functions.php. This makes it possible for authenticated attackers, with import capabilities (typically administrators), to inject and execute arbitrary PHP code on the server via crafted import templates. This can lead to remote code execution. | 18 Oct |
| CVE-2025-12775 | 8.8 high | 1.0% | no CPE yet | The WP Dropzone plugin for WordPress is vulnerable to authenticated arbitrary file upload in all versions up to, and including, 1.1.0 via the `ajax_upload_handle` function. This is due to the chunked upload functionality writing files directly to the uploads directory before any file type validation occurs. This makes it possible for authenticated attackers, with subscriber level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-13069 | 8.8 high | 1.0% | no CPE yet | The Enable SVG, WebP, and ICO Upload plugin for WordPress is vulnerable to arbitrary file upload in all versions up to, and including, 1.1.3. This is due to insufficient file type validation detecting ICO files, allowing double extension files with the appropriate magic bytes to bypass sanitization while being accepted as a valid ICO file. This makes it possible for authenticated attackers, with author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 18 Oct |
| CVE-2025-12138 | 8.8 high | 1.0% | no CPE yet | The URL Image Importer plugin for WordPress is vulnerable to arbitrary file uploads due to insufficient file type validation in all versions up to, and including, 1.0.6. This is due to the plugin relying on a user-controlled Content-Type HTTP header to validate file uploads in the 'uimptr_import_image_from_url()' function which writes the file to the server before performing proper validation. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible via the uploaded PHP file. | 18 Oct |
| CVE-2026-54449 | 8.8 high | 1.0% | no CPE yet | LangBot is a global IM bot platform designed for LLMs. In version 4.10.7 and earlier, any authenticated user can add or change an STDIO MCP server configuration without an adequate authorization boundary. In src/langbot/pkg/provider/tools/loaders/mcp.py, StdioServerParameters accepts the configured command and arguments and starts a server-side subprocess on the LangBot server. An attacker who can sign up or obtain an account can use the Extensions MCP configuration to execute arbitrary commands with the privileges of the LangBot service, enabling data disclosure, modification, and service disruption. No fixed version is available as of this review. | 18 Oct |
| CVE-2025-12529 | 8.8 high | 1.0% | no CPE yet | The Cost Calculator Builder plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the deleteOrdersFiles() function in all versions up to, and including, 3.6.3. This makes it possible for unauthenticated attackers to inject arbitrary file paths into the orders that are removed, when an administrator deletes them. This can lead to remote code execution when the right file is deleted (such as wp-config.php). This vulnerability requires the Cost Calculator Builder Pro version to be installed along with the free version in order to be exploitable. | 18 Oct |
| CVE-2025-12181 | 8.8 high | 1.0% | no CPE yet | The ContentStudio plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the cstu_update_post() function in all versions up to, and including, 1.3.7. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. CVE-2025-67910 is likely a duplicate of this. | 18 Oct |
| CVE-2026-92553 | 8.8 high | 1.0% | no CPE yet | The YaySMTP – WP Mail SMTP with Email Logs, Tracking & Reports plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 2.7.7 via the putFile function. This is due to insufficient file type validation in the putFile function, as sanitize_file_name() does not strip executable extensions and no allow-list, MIME check, or safe-extension rename is applied. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The only server-side guard is a .htaccess file containing 'Require all denied' written by writeGuards(), which is silently ignored by nginx and by Apache configured with AllowOverride None, meaning RCE is fully achievable on those server configurations. | 16 Oct |
| CVE-2026-92115 | 8.8 high | 1.0% | no CPE yet | The WP Photo Album Plus plugin for WordPress is vulnerable to authenticated Command Injection in all versions up to, and including, 9.3.02.002 via the `value` parameter of the `update-photo` AJAX action. This is due to insufficient shell escaping within the `wppa_image_magick_a()` function, where the attacker-controlled `value` parameter is concatenated raw — without `escapeshellarg()` — into an ImageMagick command string before being passed to `exec()`; further, `wppa_decode()` actively restores percent-encoded shell metacharacters (e.g., `%26`→`&`, `%23`→`#`) rather than stripping them, allowing crafted payloads to survive sanitization and break out of the ImageMagick argument context. This makes it possible for authenticated attackers holding the plugin-defined `wppa_upload` capability to execute arbitrary operating-system commands as the web-server user, achieving full remote code execution on the underlying server. Exploitation requires ImageMagick to be enabled on the server; the `wppa_upload` capability is a plugin-level privilege that site administrators may grant to lower-privileged WordPress roles via the plugin's Users settings, broadening the pool of potential attackers beyond administrators. | 16 Oct |
| CVE-2026-111311 | 8.8 high | 1.0% | no CPE yet | The DoubleScale | All-in-One CRM – Sales, Multi-Channel Marketing, Newsletter, Booking, Helpdesk, Automation, MCP & More plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.5.1 via the store_upload function. This is due to a fail-open extension allow-list in extension_is_allowed() that returns true when wp_check_filetype() yields an empty type for unrecognized extensions such as .php, combined with magic-byte-only MIME detection and no capability check beyond is_user_logged_in(). This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. Exploitation requires the Helpdesk module to be enabled, as the vulnerable REST endpoint is only registered when that module is active. | 16 Oct |
| CVE-2026-86461 | 8.8 high | 1.0% | no CPE yet | The FV Flowplayer Video Player plugin for WordPress is vulnerable to Limited Arbitrary File Upload in all versions up to, and including, 7.5.54.7212 via the check_mimetype function. This is due to incomplete file type validation in the check_mimetype function — while some extension checking is present, it can be bypassed, allowing attacker-supplied remote file content to be written with insufficient extension enforcement and no MIME check or WordPress upload helper. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. Exploitation requires the plugin's 'profile videos on bio' option to be enabled, as this causes the nonce to be emitted on the subscriber-accessible profile page; without this setting, authenticated users below Editor cannot obtain the required nonce. | 15 Oct |
| CVE-2025-1281 | 8.8 high | 1.0% | no CPE yet | The BM Content Builder plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the ux_cb_remove_layout_ajax() and ux_cb_tools_export_ajax() functions in all versions up to, and excluding, 3.17.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). | 14 Oct |
| CVE-2025-51457 | 8.8 high | 1.0% | no CPE yet | D-Link DAP-2610 up to 2.06B08r099 contains an authenticated command injection vulnerability within the web interface at the /index.xgi endpoint. An attacker with authenticated access can exploit some parameters to execute arbitrary system commands. | 14 Oct |
| CVE-2025-45868 | 8.8 high | 1.0% | no CPE yet | LogicalDOC Enterprise up to and for v9.1.1 is vulnerable to blind SQL injection in the ComparisonServlet component, allowing authenticated user to manipulate SQL queries via crafted input. | 12 Oct |
| CVE-2026-19883 | 8.8 high | 1.0% | no CPE yet | The WPeMatico RSS Feed Fetcher plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the wpematico_import_settings function in all versions up to, and including, 2.8.24. This makes it possible for authenticated attackers, with subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access. | 12 Oct |
| CVE-2026-0551 | 8.8 high | 1.0% | no CPE yet | The PPWP – Password Protect Pages plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.9.18 via deserialization of untrusted input from the 'post_protection_roles' vulnerable parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. | 12 Oct |
| CVE-2026-16149 | 8.8 high | 1.0% | no CPE yet | The Security Hardener plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 2.4.4. The vulnerability exists because the plugin's user-enumeration protection, which is enabled by default, hooks the rest_endpoints filter via secure_user_endpoints() and overwrites every registered handler's permission_callback on both the /wp/v2/users and /wp/v2/users/(?P<id>[\d]+) routes — including POST, PUT, PATCH, and DELETE handlers — with a bare closure that returns only is_user_logged_in(), completely stripping WordPress Core's original capability checks such as create_users, promote_user, edit_users, and delete_users that WP_REST_Users_Controller normally enforces. This makes it possible for authenticated attackers with Subscriber-level access and above to create new Administrator accounts by sending POST request to /wp/v2/users with administrator role, or to reset an existing Administrator's password by issuing a PUT/POST request to /wp/v2/users/<id>. Because the block_user_enum option defaults to enabled, no special plugin configuration is required — the overwrite is active on every request as soon as the plugin is installed. | 12 Oct |
| CVE-2026-17196 | 8.8 high | 1.0% | no CPE yet | The Super Forms – Drag & Drop Form Builder plugin for WordPress is vulnerable to Unrestricted File Type Upload in all versions up to, and including, 6.3.316 via the upload_files function. This is due to missing file type validation in the upload_files function, which reads and applies an attacker-controlled extensions string from _super_elements post meta verbatim as the allowed MIME type map. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The attack requires a preceding step: poisoning the _super_elements post meta via the super_save_form AJAX handler, which lacks a capability and nonce check but requires the attacker to be authenticated as at minimum a Subscriber-level user; the subsequent file upload via super_upload_files requires no authentication at all. | 8 Oct |
| CVE-2025-11746 | 8.8 high | 1.0% | no CPE yet | The XStore theme for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 9.5.4 via theet_ajax_required_plugins_popup() function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | 8 Oct |
| CVE-2025-10706 | 8.8 high | 1.0% | no CPE yet | The Classified Pro theme for WordPress is vulnerable to unauthorized plugin installation due to a missing capability check in the 'cwp_addons_update_plugin_cb' function in all versions up to, and including, 1.0.14. This makes it possible for authenticated attackers, with subscriber-level access and above, to install arbitrary plugins on the affected site's server which may make remote code execution possible. Note: The required nonce for the vulnerability is in the CubeWP Framework plugin. | 8 Oct |
| CVE-2026-103603 | 8.7 high | 1.0% | bouncycastle, bc-csharp | Memory allocation with excessive size value in the HSS/LMS signature code (HssPublicKeyParameters, HssSignature) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows a remote unauthenticated attacker who can supply both an HSS public key and a signature to cause a denial of service through memory exhaustion via a public key encoding with an excessive level count, because the level count L read when parsing an HSS public key was not checked against the RFC 8554 maximum of 8, and signature parsing then allocated an array of L - 1 entries before reading any further signature data. A single verification can commit up to about 17 GB of memory or fail with an OutOfMemoryException. | Wed 28 Oct |
| CVE-2026-110499 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to grow per-connection memory and CPU cost without bound via a large SETTINGS_HEADER_TABLE_SIZE. Bandit resizes its HPACK encoder table to whatever size the client advertises, up to 2^32-1 bytes, and indexes response headers into it. Because responses carry distinct values such as date or content-length, nothing is evicted and the table grows with every response for the life of the connection, while each lookup scans it linearly. The SETTINGS handling in Bandit.HTTP2.Connection (lib/bandit/http2/connection.ex) passes remote_settings.header_table_size to HPAX.resize/2 with no server-side cap, and encode_headers encodes every response header as :store. Serving N responses on one connection therefore costs O(N²) CPU in the connection process. This issue affects bandit: from 0.3.6 before 1.14.0. | Mon 26 Oct |
| CVE-2026-13084 | 8.7 high | 1.0% | watchguard, fireware | A null pointer dereference vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to create a denial-of-service (DoS) condition by sending specially crafted IKEv2 messages. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2 | Sun 25 Oct |
| CVE-2026-59161 | 8.7 high | 1.0% | excelize | Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. Prior to 2.11.0, the streaming worksheet reader used by Rows and GetRows does not enforce the TotalRows limit on the row r attribute, allowing a small XLSX file with a row number above 1048576 and no cell coordinate to make GetRows append empty rows up to the attacker-controlled index and consume excessive memory and CPU. This issue is fixed in version 2.11.0. | Sun 25 Oct |
| CVE-2026-55685 | 8.7 high | 1.0% | shopify, react-router | React Router is a router for React. In versions 7.0.0 through 7.17.0, the manifest endpoint could be accessed via unauthenticated targeted requests that would put heavy load on the server and slow down response times. This issue is a follow up to CVE-2026-42342, and does not does not impact React Router applications using Declarative Mode (<BrowserRouter>) or Data Mode (createBrowserRouter/<RouterProvider>). This issue has been fixed in version 7.18.0. | Sat 24 Oct |
| CVE-2025-34457 | 8.7 high | 1.0% | no CPE yet | wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 694c954, contain a stack-based buffer overflow vulnerability in the function kiss_rec_byte() located in src/kiss_frame.c. When processing crafted KISS frames that reach the maximum allowed frame length (MAX_KISS_LEN), the function appends a terminating FEND byte without reserving sufficient space in the stack buffer. This results in an out-of-bounds write followed by an out-of-bounds read during the subsequent call to kiss_unwrap(), leading to stack memory corruption or application crashes. This vulnerability may allow remote unauthenticated attackers to trigger a denial-of-service condition. | 19 Oct |
| CVE-2025-58046 | 8.7 high | 1.0% | dataease | Dataease is an open-source data visualization and analysis platform. In versions up to and including 2.10.12, the Impala data source is vulnerable to remote code execution due to insufficient filtering in the getJdbc method of the io.dataease.datasource.type.Impala class. Attackers can construct malicious JDBC connection strings that exploit JNDI injection and trigger RMI deserialization, ultimately enabling remote command execution. The vulnerability can be exploited by editing the data source and providing a crafted JDBC connection string that references a remote configuration file, leading to RMI-based deserialization attacks. This issue has been patched in version 2.10.13. It is recommended to upgrade to the latest version. No known workarounds exist for affected versions. | 19 Oct |
| CVE-2025-58748 | 8.7 high | 1.0% | dataease | Dataease is an open source data analytics and visualization platform. In Dataease versions up to 2.10.12 the H2 data source implementation (H2.java) does not verify that a provided JDBC URL starts with jdbc:h2. This lack of validation allows a crafted JDBC configuration that substitutes the Amazon Redshift driver and leverages the socketFactory and socketFactoryArg parameters to invoke org.springframework.context.support.FileSystemXmlApplicationContext or ClassPathXmlApplicationContext with an attacker‑controlled remote XML resource, resulting in remote code execution. Versions up to and including 2.10.12 are affected. The issue is fixed in version 2.10.13. Updating to version 2.10.13 or later is the recommended remediation. No known workarounds exist. | 19 Oct |
| CVE-2025-34331 | 8.7 high | 1.0% | audiocodes, fax_server, interactive_voice_response | AudioCodes Fax Server and Auto-Attendant IVR appliances versions up to and including 2.6.23 contain an unauthenticated file read vulnerability via the download.php script. The endpoint exposes a file download mechanism that lacks access control, allowing remote, unauthenticated users to request files stored on the appliance based solely on attacker-supplied path and filename parameters. While limited to specific file extensions permitted by the application logic, sensitive backup archives can be retrieved, exposing internal databases and credential hashes. Successful exploitation may lead to disclosure of administrative password hashes and other sensitive configuration data. | 18 Oct |
| CVE-2026-76003 | 8.6 high | 1.0% | no CPE yet | A weakness has been identified in UTT HiPER 1200GW up to 2.5.3-170306. Affected is the function strcpy of the file /goform/formGroupConfig. Executing a manipulation of the argument timestart can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. | 22 Oct |
| CVE-2026-76004 | 8.6 high | 1.0% | no CPE yet | A security vulnerability has been detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this vulnerability is the function strcpy of the file /goform/aspApBasicConfigUrcp of the component HTTP Handler. The manipulation of the argument pvid leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. | 22 Oct |
| CVE-2026-108893 | 8.6 high | 1.0% | no CPE yet | A vulnerability was identified in Linksys E1700 up to 1.0.0.4.003. This issue affects the function setVlan of the file /goform/setVlan. Such manipulation of the argument vlan_set leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | 13 Oct |
| CVE-2026-78169 | 8.6 high | 1.0% | no CPE yet | A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This impacts the function strcpy of the file /goform/aspRemoteApConfTempSend of the component HTTP Request Handler. Performing a manipulation of the argument Profile results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. | 12 Oct |
| CVE-2026-48036 | 8.4 high | 1.0% | no CPE yet | Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, consumers running drift detection in CI / cron could see transient adapter failures silently cached as "all clear" — masking real attacks for up to six hours — or see ordinary provider-version churn falsely promoted to incident severity. Either way, the verdict source was unreliable for downstream incident workflows that gate on it. This issue has been patched in version 1.4.0. | Sat 24 Oct |
| CVE-2026-111280 | 8.3 high | 1.0% | no CPE yet | snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadArea() that allows malicious S7 peers to overflow client buffers via an unchecked DataLength field. Rogue or impersonated PLCs can return crafted ReadVar responses causing memcpy of up to 65535 bytes into caller buffers, crashing SCADA, HMI, or gateway processes and corrupting memory. | 23 Oct |
| CVE-2026-114092 | 8.3 high | 1.0% | no CPE yet | Trigger.dev before 4.5.0 performs no authentication or organization check in the action handler of the dashboard run replay route (resources.taskruns.$runParam.replay) and looks up the run by friendlyId alone. A remote attacker who knows a victim's run friendlyId can replay it into an environment of their choosing, exposing the victim's task payload or running the task again with the victim's secrets. | 22 Oct |
| CVE-2025-15661 | 8.3 high | 1.0% | libssh2 | libssh2 through 1.11.1, fixed in commit 2dae302, contains an out-of-bounds heap read vulnerability in the sftp_symlink() function in src/sftp.c that allows a malicious SSH server or man-in-the-middle attacker to disclose heap memory contents or cause a crash by sending a crafted SSH_FXP_NAME response. Attackers can supply a link_len value larger than the actual packet data in SSH_FXP_NAME responses for SFTP READLINK and REALPATH operations, triggering a heap buffer over-read of up to target_len minus one bytes due to the missing validation of available packet buffer size before the memcpy operation. | 12 Oct |
| CVE-2026-46037 | 8.2 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: validate reply type before using icmp_pointers Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type. That value is outside the range covered by icmp_pointers[], which only describes the traditional ICMP types up to NR_ICMP_TYPES. Avoid consulting icmp_pointers[] for reply types outside that range, and use array_index_nospec() for the remaining in-range lookup. Normal ICMP replies keep their existing behavior unchanged. | 19 Oct |
| CVE-2026-89586 | 8.2 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte ata_scsi_rbuf staging buffer, and the number of bytes copied is compared against the logical sector size by the caller: size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); if (size != len) /* len == sdp->sector_size */ goto invalid_param_len; ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE (2048). On a device whose logical sector size exceeds that (e.g. a 4Kn device, where sector_size == 4096) the function can never return more than 2048, while the caller expects it to return sector_size. The comparison therefore always fails, so every TRIM is rejected with "Parameter list length error" and WARN_ON() splats on each attempt. TRIM / discard is thus completely broken on such devices. The descriptor was incorrectly sized from the logical sector size. A DSM TRIM payload is a list of 512-byte pages, each holding up to ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical sector size. The Block Limits VPD page already advertises a single such page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical blocks), so the block layer never sends a request that needs more than one page. Emit exactly one 512-byte page, independent of the logical sector size, and transfer only that page (COUNT == 1). For a 512-byte-sector device this is unchanged; devices with larger logical sectors now work instead of failing every TRIM. | 19 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.