Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-47667 | 7.5 high | 1.0% | no CPE yet | CImg Library is a C++ library for image processing. Prior to version 4.0.0 in `_load_analyze()`, the header_size field is read as an `unsigned int` from the first 4 bytes of an Analyze/NIfTI file and passed directly to `new unsigned char[header_size]` without being bounded against the actual file size. A value up to ~4 GB is accepted. If the subsequent `fread` returns `short` as it will for any malformed file), the function throws a `CImgIOException` and the allocated buffer is never freed. A 6-byte crafted file is sufficient to trigger an allocation of ~1.3 GB per call, with the full allocation leaked on every error path. The issue is reachable via `load_analyze()` and the generic `load()` when the file extension is .hdr, .img, or .nii. Version 4.0.0 fixes the issue. | 24 Oct |
| CVE-2026-61891 | 7.5 high | 1.0% | eclipse, theia | In Eclipse Theia versions up to and including 1.73.1, the `@theia/filesystem` backend exposes HTTP file-download endpoints (`GET /file`, `GET /files/`, `PUT /files/`) that convert a client-supplied URI directly to a filesystem path and stream the file, without confining it to the workspace or any allow-listed root. In browser (non-Electron) deployments the connection token is enforced only on WebSocket upgrades; the HTTP middleware in `@theia/core` re-issues the cookie and calls `next()` without rejecting tokenless HTTP requests, so these endpoints are reachable without a valid token. As a result an unauthenticated client can read any file readable by the backend process, including files outside the opened workspace (for example `/etc/hosts`, SSH keys, or tokens). Electron mode uses a separate `ElectronSecurityToken` and is not affected via this path. | 24 Oct |
| CVE-2026-67422 | 7.5 high | 1.0% | no CPE yet | pymdown-extensions is a collection of extensions for the Python Markdown library. In versions up to and including 11.0, four inline processors (caret, tilde, betterem, and magiclink) use regular expressions whose content groups can partition a run of delimiter characters in exponentially many ways, causing catastrophic backtracking. As a result, a single untrusted Markdown line under 50 bytes rendered with markdown.markdown() in each extension's default configuration drives the rendering thread into unbounded CPU usage that grows exponentially with input length, enabling an unauthenticated remote attacker who can submit Markdown to cause denial of service. The exposure is concrete for web applications that render user-supplied Markdown (comments, wikis, issue bodies, live preview), including any app using pymdownx.extra which bundles the vulnerable betterem default, as well as hosted docs/CI systems that build untrusted Markdown. The issue has been fixed in version 11.0.1. | 24 Oct |
| CVE-2026-98401 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_xmit (net/core/dev.c:4787) br_dev_queue_push_xmit (net/bridge/br_forward.c:53) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:315) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6099) __netif_receive_skb_list_core (net/core/dev.c:6287) netif_receive_skb_list_internal (net/core/dev.c:6445) napi_complete_done (net/core/dev.c:6813) gro_cell_poll (net/core/gro_cells.c:74) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 ) __local_bh_enable_ip (kernel/softirq.c:450) tun_get_user (drivers/net/tun.c:1986 (discriminator 1)) tun_chr_write_iter (drivers/net/tun.c:2032) The issue is completely latent until qdisc read transport header in commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()"). The crash requires four conditions to line up: 1. The incoming packet is encapsulated and carries GSO metadata. The outer transport header offset is stored in skb->transport_header while the packet is still in the outer tunnel context. 2. The tunnel receiver strips the outer headers. skb->data is advanced to the inner frame, but skb->transport_header is left pointing to the now-removed outer L4 header, so it becomes a negative offset relative to the new data. 3. The inner frame is not delivered to the local IP stack. Instead, it is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and the transport header is not reset to the inner L4 offset. 4. The forwarding path calls __dev_queue_xmit(), which enters qdisc_pkt_len_segs_init(). That function computes the GSO header length from skb_transport_offset(skb). Because the offset is negative, the unsigned cast overflows and pskb_may_pull(skb, hdr_len + sizeof(struct tcphdr)) reads past the end of the skb, triggering a KASAN fault or page fault. The issue specifically requires GSO packets (shinfo->gso_size != 0), which are processed/aggregated through gro_cells. Fix this by clearing transport_header to the ~0U sentinel in gro_cell for all tunnnel driver. GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly. | 24 Oct |
| CVE-2026-28811 | 7.5 high | 1.0% | apache, jspwiki | Debug Messages Revealing Unnecessary Information in Apache JSPWiki up to 2.12.3. Users are recommended to upgrade to version 2.12.4, which fixes this issue. | 23 Oct |
| CVE-2026-28814 | 7.5 high | 1.0% | apache, jspwiki | Arbitrary Wiki Markup rendering due to lack of authentication in Apache JSPWiki up to 2.12.3 allows attacker to obtain sensitive data stored in JSPWiki variables. Users are recommended to upgrade to version 2.12.4 or 3.0.0, which fixes this issue. | 23 Oct |
| CVE-2026-115497 | 7.5 high | 1.0% | no CPE yet | The Music Store – WordPress eCommerce plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.4.7 via the 'f' parameter parameter. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. Exploitation requires a valid purchase_id token, which any user can obtain by making a single low-cost purchase or receiving a shared download link. | 23 Oct |
| CVE-2026-98056 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:__srcu_read_unlock+0xb/0x20 Call Trace: nvme_find_get_ns+0x7d/0xb0 [nvme_core] nvme_scan_ns_list+0xe8/0x280 [nvme_core] nvme_scan_work+0x18a/0x280 [nvme_core] process_one_work+0x197/0x380 worker_thread+0x2fe/0x410 kthread+0xe0/0x100 Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range() and give it an open (start, end) NSID range. ctrl->namespaces is sorted by NSID, so the whole gap is dropped in a single walk that stops once end is reached. This bounds the work by the namespaces that are present instead of by the size of the gap. | 21 Oct |
| CVE-2026-72203 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | 21 Oct |
| CVE-2026-68498 | 7.5 high | 1.0% | no CPE yet | StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default. In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory. A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration. Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes. This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. | 20 Oct |
| CVE-2025-14071 | 7.5 high | 1.0% | no CPE yet | The Live Composer – Free WordPress Website Builder plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 2.0.2 via deserialization of untrusted input in the dslc_module_posts_output shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable plugin, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. | 19 Oct |
| CVE-2026-68299 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively. | 19 Oct |
| CVE-2026-68287 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. | 19 Oct |
| CVE-2026-68129 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet. | 19 Oct |
| CVE-2026-64545 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net, bpf: check master for NULL in xdp_master_redirect() xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up. | 19 Oct |
| CVE-2026-52974 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix strparser anchor skb leak on offload RX setup failure When tls_set_device_offload_rx() fails at tls_dev_add(), the error path calls tls_sw_free_resources_rx() to clean up the SW context that was initialized by tls_set_sw_offload(). This function calls tls_sw_release_resources_rx() (which stops the strparser via tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context), but never frees the anchor skb that was allocated by alloc_skb(0) in tls_strp_init(). Note that tls_sw_free_resources_rx() is exclusively used for this "failed to start offload" code path, there's no other caller. The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use the standard strparser"), because the standard strparser doesn't try to pre-allocate an skb. The normal close path in tls_sk_proto_close() handles cleanup by calling tls_sw_strparser_done() (which calls tls_strp_done()) after dropping the socket lock, because tls_strp_done() does cancel_work_sync() and the strparser work handler takes the socket lock. | 19 Oct |
| CVE-2026-45860 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES | 19 Oct |
| CVE-2026-43194 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | 19 Oct |
| CVE-2025-61590 | 7.5 high | 1.0% | anysphere, cursor | Cursor is a code editor built for programming with AI. Versions 1.6 and below are vulnerable to Remote Code Execution (RCE) attacks through Visual Studio Code Workspaces. Workspaces allow users to open more than a single folder and save specific settings (pretty similar to .vscode/settings.json) for the folders / project. An untitled workspace is automatically created by VS Code (untitled.code-workspace), which contains all the folders and workspace settings from the user's current session, opening up an entire new attack vector if the user has a .code-workspace file in path (either untitled created automatically or a saved one). If an attacker is able to hijack the chat context of the victim (such as via a compromised MCP server), they can use prompt injection to make the Cursor Agent write into this file and modify the workspace. This leads to a bypass of CVE-2025-54130 which can lead to RCE by writing to the settings section. This issue is fixed in version 1.7. | 19 Oct |
| CVE-2025-6985 | 7.5 high | 1.0% | no CPE yet | The HTMLSectionSplitter class in langchain-text-splitters version 0.3.8 is vulnerable to XML External Entity (XXE) attacks due to unsafe XSLT parsing. This vulnerability arises because the class allows the use of arbitrary XSLT stylesheets, which are parsed using lxml.etree.parse() and lxml.etree.XSLT() without any hardening measures. In lxml versions up to 4.9.x, external entities are resolved by default, allowing attackers to read arbitrary local files or perform outbound HTTP(S) fetches. In lxml versions 5.0 and above, while entity expansion is disabled, the XSLT document() function can still read any URI unless XSLTAccessControl is applied. This vulnerability allows remote attackers to gain read-only access to any file the LangChain process can reach, including sensitive files such as SSH keys, environment files, source code, or cloud metadata. No authentication, special privileges, or user interaction are required, and the issue is exploitable in default deployments that enable custom XSLT. | 19 Oct |
| CVE-2026-108123 | 7.5 high | 1.0% | no CPE yet | The WP Booking System – Booking Calendar plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.1.0.3 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to read the stored notification email body of any booking by iterating booking_id and email_log_id, exposing customer PII including names, email addresses, phone numbers, messages, and booking dates intended to be visible only to administrators. This is exploitable by any Subscriber-level user because admin_init fires on profile.php, a wp-admin page accessible to all authenticated users. | 19 Oct |
| CVE-2026-93151 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma transport is removed while I/Os are in flight, a response can be posted but its send completion is never delivered before the connection is torn down. As a result nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for the response, and this leaks the allocated RDMA read/write context and request SGLs. These leaks are recreated by running blktests nvme/061 with the rdma transport and the siw driver. Kernel kmemleak feature reports them as follows: unreferenced object 0xffff88812bc490c0 (size 32): comm "kworker/2:1H", pid 409, jiffies 4307744490 backtrace (crc 89afd339): __kmalloc_noprof+0x5f9/0x890 sgl_alloc_order+0x7b/0x380 nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet] nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 unreferenced object 0xffff88814bd05e80 (size 64): comm "kworker/3:1H", pid 148, jiffies 4295195428 backtrace (crc e35510cb): __kmalloc_noprof+0x5f9/0x890 rdma_rw_ctx_init+0x333/0x1fa0 [ib_core] nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 To avoid the memory leaks, reclaim the memory of the in-flight responses when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources() that frees up the RDMA read/write context and the request SGLs of such responses. | 19 Oct |
| CVE-2026-90067 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810 net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070 ... Call Trace: <TASK> ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> According to the msgr2 protocol specification, the banner payload is expected to contain at least two 64-bit integers (`server_feat` and `server_req_feat`). Therefore, `payload_len` must be at least 16 bytes. Fix this by adding a check in `process_banner_prefix()` to reject a `payload_len` smaller than 16 bytes. This prevents the 0-length read and correctly aborts the connection with a protocol error. | 19 Oct |
| CVE-2026-89706 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: Reset write verifier when async COPY writeback fails Async COPY captures nn->writeverf at request time and reports it to the client via CB_OFFLOAD after the worker kthread completes. When the post-copy vfs_fsync_range() or filemap_check_wb_err() in _nfsd_copy_file_range() reports an error, the worker correctly leaves NFSD4_COPY_F_COMMITTED clear so that CB_OFFLOAD encodes wr_stable_how as NFS_UNSTABLE, but the server's write verifier is not rotated. A client that receives NFS_UNSTABLE in CB_OFFLOAD follows up with COMMIT to make the copied data durable. With the verifier unchanged, COMMIT returns the same value the client just received via CB_OFFLOAD, and the client concludes the copy is durable -- silently dropping the data whose writeback in fact failed. This violates the UNSTABLE+COMMIT durability contract (RFC 7862 section 15.1, RFC 8881 section 18.32) and matches the bug just fixed in nfsd_vfs_write() and nfsd_commit(). Rotate nn->writeverf at the writeback-failure site. The async COPY worker has no svc_rqst, so commit_reset_write_verifier() is not available here; calling nfsd_reset_write_verifier() directly mirrors the trace-less reset already used by nfsd_file_check_write_error() for the same purpose. Filter out -EAGAIN and -ESTALE, matching commit_reset_write_verifier(), since neither indicates a durable-storage failure. | 19 Oct |
| CVE-2026-89699 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: validate symlink target length in NFSv4 CREATE nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for NF4LNK symlink targets, allowing a client to force a kmalloc of up to the maximum RPC payload size (several MiB) per COMPOUND op that persists until compound teardown. The VFS rejects oversized targets with ENAMETOOLONG, but the allocation has already occurred. Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the allocation. | 19 Oct |
| CVE-2026-89549 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sunrpc: route to a populated pool in svc_pool_for_cpu() svc_set_num_threads() spreads the requested threads evenly across the service's pools (base = nrservs / sv_nrpools). When a service runs fewer threads than it has pools -- e.g. an nfsd configured with fewer threads than the host has NUMA nodes while running in "pernode" or "percpu" mode -- the trailing pools are left with no threads at all. svc_xprt_enqueue() selects a pool from the CPU servicing the transport, queues the transport on that pool's sp_xprts, and only wakes a thread from the same pool. Each thread services exclusively its own pool, so a transport that lands on a threadless pool is enqueued on sp_xprts and never picked up: the connection hangs indefinitely. Have svc_pool_for_cpu() skip pools that currently have no threads, falling back to the next populated pool. This trades NUMA locality for a guarantee that the work is actually serviced. sp_nrthreads is only updated under the service mutex; the lockless read here is a best-effort routing hint, so annotate it with data_race(). | 19 Oct |
| CVE-2026-80997 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix stalled modem TX queue after runtime resume ipa_start_xmit() unconditionally stops the TX queue before calling pm_runtime_get(), relying on the wake scheduled by runtime resume (ipa_modem_wake_queue_work()) to restart it once power is ACTIVE. But that work is queued from within the runtime resume callback, before the device's power state reaches RPM_ACTIVE, so it can run while the device is still RPM_RESUMING. The wake is then consumed too early: the transmit it restarts stops the queue again, pm_runtime_get() returns -EINPROGRESS without arranging any future wake (deferred_resume exists only for RPM_SUSPENDING), and after the resume completes nothing is left to wake the queue. Transmit stalls permanently: packets pile up in the qdisc behind the stopped queue, the device runtime-suspends, and since the netdev registers no ndo_tx_timeout the watchdog never fires. Observed on SM7635 (Fairphone 6) as the cellular data path going permanently deaf within hours, RX included, since nothing resumes the suspended endpoints. Close the window by making the wake work wait for the resume to complete (pm_runtime_get_sync()) before waking the queue. Every queue stop is then guaranteed a later wake that happens while power is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules the work. If the device could not be resumed, wake the queue anyway so pending packets are dropped by the transmit path rather than stranded. The STARTED power flag used to narrow this window: a wake running before the transmit path's stop suppressed that stop, but only once, as the flag was cleared by the first stop it absorbed. Removing the flag made a single transmit during an in-flight resume sufficient to strand the queue, which is the form observed. With an accelerated reproducer (autosuspend delay shortened to 5 ms, ~20 packets/s of TX), an unpatched kernel stalled three times in 230 s / 4380 packets; with this patch the same test ran 3601 s / 70298 packets without a stall. | 19 Oct |
| CVE-2025-11704 | 7.5 high | 1.0% | no CPE yet | The Elegance Menu plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.9 via the 'elegance-menu' attribute of the `elegance-menu` shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | 18 Oct |
| CVE-2026-80527 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ] | 16 Oct |
| CVE-2026-74717 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, return NULL on create error Tracer creation can fail by returning either NULL or ERR_PTR. The return value is stored without a check on the device, and users treat ERR_PTR and NULL the same way. This also causes a crash in the core dump logic, which is missing the ERR_PTR check and ends up dereferencing it, as shown in the trace below. Switch tracer creation to return NULL on failure only, so callers only need a single NULL check. Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none) Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core] pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core] sp : ffff800081cf3c40 x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05 x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000 x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0 x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650 x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8 x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e Call trace: mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P) mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core] devlink_health_do_dump+0x9c/0x160 devlink_health_report+0x1c0/0x288 mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core] process_one_work+0x15c/0x3d8 worker_thread+0x18c/0x320 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: b9400000 5ac00800 7a401800 540003ca (3940a260) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x000000,00078031,75fce5a1,35fffe67 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- | 16 Oct |
| CVE-2026-74626 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_netdev: Preserve RX queue depth on allocation failure ntb_netdev_rx_handler() hands the received skb to the network stack before allocating its replacement. If the allocation fails, nothing is reposted. Every failure therefore takes one buffer out of the RX queue while the interface remains up, and enough failures eventually stall reception. A retry path could refill the queue later, but ntb_netdev has none. Allocate the replacement first instead. If that fails, drop the packet and repost the same skb. This keeps the queue full and lets packet delivery resume as soon as memory is available again. | 16 Oct |
| CVE-2026-72418 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: prevent connlimit drops for early confirmed ct Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too. | 16 Oct |
| CVE-2026-72231 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms. | 16 Oct |
| CVE-2026-77781 | 7.5 high | 1.0% | no CPE yet | Tie::Hash::Regex versions before 2.0.0 for Perl will throw an exception on unparseable lookup keys. The FETCH, EXISTS and DELETE methods throw an exception when on malformed regular expressions. Each method falls back to a regex match when the key is not already stored in the hash, compiling the caller's key with a bare qr// and no eval guard. A key that is not a valid regular expression pattern, such as a single unmatched bracket, dies. An application that looks up externally supplied strings in a tied hash will die on an invalid key. | 15 Oct |
| CVE-2026-110284 | 7.5 high | 1.0% | no CPE yet | The LifterLMS – WP LMS for eLearning, Online Courses, & Quizzes plugin for WordPress is vulnerable to Local File Inclusion in versions up to, and including, 10.3.1 via attacker-controlled attributes of the [lifterlms_checkout] shortcode. This is due to the llms_get_template() helper performing extract() on the shortcode attribute array before resolving the template path, which allows the attacker-supplied 'template_name' and 'default_path' shortcode attributes to overwrite the function's local parameters and ultimately control the path passed to a PHP include. This makes it possible for authenticated attackers, with Instructor-level access and above, to include and execute arbitrary files on the server, that can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where files with safe extensions containing attacker-controlled content can be uploaded and included. | 15 Oct |
| CVE-2026-46110 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Prevent NULL deref when RX memory exhausted The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change. | 15 Oct |
| CVE-2026-31711 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | 15 Oct |
| CVE-2026-103423 | 7.5 high | 1.0% | no CPE yet | The Booking Package plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.7.29 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to retrieve personally identifiable information for every booked customer stored in the booking_package_booked_customers table, including names, email addresses, phone numbers, physical addresses, and cancellation tokens. The nonce nominally protecting the endpoint is a public CSRF token emitted in the localized booking_package JavaScript object on any page rendering the [booking_package] shortcode or widget, making it trivially harvestable by unauthenticated visitors and providing no effective authentication barrier. | 14 Oct |
| CVE-2026-104749 | 7.5 high | 1.0% | no CPE yet | The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. | 14 Oct |
| CVE-2026-75347 | 7.5 high | 1.0% | no CPE yet | EIPStackGroup OpENer v2.3 and master up to commit 76b95cf contain an expired pointer dereference vulnerability in the EtherNet/IP Common Packet Format (CPF) handling logic. This allows a remote attacker to cause a denial of service. | 13 Oct |
| CVE-2026-93746 | 7.5 high | 1.0% | no CPE yet | The WebToffee WooCommerce PDF Invoices, Packing Slips, Delivery Notes & Shipping Labels plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 5.0.2 via the 'email' parameter of the guest print_document_from_the_mail_link handler dispatched from print_window() on init. This is due to the handler authorizing access to an order's printable documents when the attacker-supplied (base64-encoded) 'email' equals the order's billing email — a non-secret identifier — instead of requiring the WooCommerce order_key. This makes it possible for unauthenticated attackers, when the site is configured to allow guest access to documents ('wt_pklist_print_button_access_for' != 'logged_in'), to retrieve any other customer's invoice, packing slip, delivery note, dispatch label or shipping label — including customer name, billing/shipping address, phone number, purchased products, prices, taxes and invoice metadata — by knowing the target order ID and the associated billing email address. | 13 Oct |
| CVE-2026-2996 | 7.5 high | 1.0% | no CPE yet | The Advanced Product Fields (Product Addons) for WooCommerce plugin for WordPress is vulnerable to Improper Input Validation in all versions up to, and including, 1.6.21. This is due to a logic flaw in the 'validate_cart_data' function. This makes it possible for unauthenticated attackers to bypass required paid addons and complete purchases at the base product price only, effectively stealing products by paying a fraction of the intended total. The vulnerability was partially patched in version 1.6.19. | 12 Oct |
| CVE-2025-9212 | 7.5 high | 1.0% | no CPE yet | The WP Dispatcher plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the wp_dispatcher_process_upload() function in all versions up to, and including, 1.2.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. The directory does have an .htaccess file which limits the ability to achieve remote code execution. | 12 Oct |
| CVE-2026-75348 | 7.5 high | 1.0% | no CPE yet | An out-of-bounds read vulnerability exists in EIPStackGroup OpENer v2.3 and master up to commit 76b95cf in the EtherNet/IP TCP SendRRData Common Packet Format parser. The issue occurs in CreateCommonPacketFormatStructure() when it parses recognized optional socket address information items of type 0x8000 or 0x8001 without first validating that the remaining CPF buffer contains the complete fixed sockaddr structure. This allows a remote attacker to cause a denial of service. | 9 Oct |
| CVE-2025-11722 | 7.5 high | 1.0% | no CPE yet | The Woocommerce Category and Products Accordion Panel plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.0 via the 'categoryaccordionpanel' shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | 8 Oct |
| CVE-2026-6168 | 7.4 high | 1.0% | no CPE yet | A flaw has been found in TOTOLINK A7000R up to 9.1.0u.6115. The affected element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid5g causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. | Mon 26 Oct |
| CVE-2026-7418 | 7.4 high | 1.0% | no CPE yet | A vulnerability was determined in UTT HiPER 1250GW up to 3.2.7-210907-180535. This vulnerability affects the function strcpy of the file route/goform/NTP. Executing a manipulation of the argument Profile can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. | Mon 26 Oct |
| CVE-2026-7675 | 7.4 high | 1.0% | no CPE yet | A vulnerability has been found in Shenzhen Libituo Technology LBT-T300-HW1 up to 1.2.8. Impacted is the function start_lan of the file /apply.cgi. The manipulation of the argument Channel/ApCliSsid leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2026-6186 | 7.4 high | 1.0% | no CPE yet | A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This vulnerability affects the function strcpy of the file /goform/formNatStaticMap. The manipulation of the argument NatBind leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. | Sun 25 Oct |
| CVE-2026-7419 | 7.4 high | 1.0% | no CPE yet | A vulnerability was identified in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file route/goform/formTaskEdit_ap. The manipulation of the argument Profile leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. | Sun 25 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.