Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-63687 | 9.1 critical | 0.00% | apache, cxf | Apache CXF's JwtRequestCodeFilter copies all claims from a signed request JWT into the authorization parameter map without excluding security-sensitive parameters. A client that can produce a validly-signed request JWT (e.g., one whose client_secret is known or compromised) can thereby substitute the code_challenge, code_challenge_method, nonce, and state values that were set in the outer HTTP request, undermining PKCE integrity and OpenID Connect replay protection. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. | Sat 24 Oct |
| CVE-2026-98549 | 9.1 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition. | 24 Oct |
| CVE-2026-16503 | 9.1 critical | 0.00% | no CPE yet | Deployment of the VPS.org one-click Supabase template deploys a PostgreSQL instance that is published on all interfaces (0.0.0.0:5432) with a default database password set to "postgres". Because Docker installs its own iptables rules, this exposure bypasses a standard host UFW configuration. | 23 Oct |
| CVE-2026-48170 | 9.1 critical | 0.00% | no CPE yet | `scim-patch`, a library to perform SCIM patch, prior to version 0.9.1 performs prototype pollution when applying a SCIM PATCH operation whose `value` object contains a key like `"__proto__.someProp"`. After one such patch, `Object.prototype.someProp` is set process-wide, affecting every plain object in the Node process. Any service that calls `scimPatch()` on attacker-controlled JSON (i.e. any SCIM endpoint accepting `PATCH` from an external IdP) is exploitable on a stock Node runtime. Version 0.9.1 contains a patch. A workaround is available. Calling `Object.freeze(Object.prototype)` (and the same on `Array.prototype`, `Function.prototype`) at process startup neutralizes this class of bug — assignment to a frozen prototype becomes a silent no-op in sloppy mode or a `TypeError` in strict mode. Node's `--frozen-intrinsics` flag does this for built-ins automatically. | 23 Oct |
| CVE-2026-93228 | 9.1 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list. | 21 Oct |
| CVE-2026-109383 | 9.1 critical | 0.00% | nodejs, undici | undici is an HTTP client library for Node.js. In versions 4.0.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its Agent dispatcher passes its constructor options through a JSON-based deep clone before forwarding them to each per-origin pool, and because JSON cannot represent functions, a caller-supplied tls option containing a checkServerIdentity callback is silently dropped before it reaches the TLS layer. As a result, a TLS peer whose certificate a custom checkServerIdentity was written to reject, but which passes Node's default hostname and chain checks, is silently accepted. Because Agent is the default dispatcher behind request, fetch, and setGlobalDispatcher, this affects the path most applications use, and EnvHttpProxyAgent is affected on its direct and no-proxy routes as well, while only applications that pass a function-valued tls option such as a custom checkServerIdentity for certificate or public-key pinning are at risk. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which preserve the tls option outside the JSON clone so custom verification callbacks are forwarded unchanged, and users should upgrade to one of those versions or later. As a workaround, pass the TLS options through connect instead of tls, or for proxied destinations use requestTls and proxyTls. | 19 Oct |
| CVE-2026-109829 | 9.1 critical | 0.00% | nodejs, undici | undici is an HTTP client library for Node.js. In versions 7.0.0 through 7.30.0 and 8.0.0 through 8.12.1, when an originless Agent composes the redirect and cache interceptors in that order with a shared cache store, the cache builds its key from the original request URL before the redirect handler changes the origin, so a response produced after a cross-origin redirect is stored under the original key. An attacker who controls the target of a redirect from a trusted URL can have their response cached under that trusted URL and served to later callers, allowing persistent cache poisoning, and the same key confusion lets a private, non-stored redirect response to a user-specific resource be stored under the original URL and served to a later unauthenticated caller, disclosing private data. Applications are affected only when an originless Agent, a shared cache store, and the redirect-then-cache composition are all used. The issue is fixed in undici 7.30.1 and 8.12.2, which verify the producing origin still matches the cache key and preserve each redirect hop's cache-control policy before storing, and users should upgrade to one of those versions or later. As a workaround, compose the cache interceptor before the redirect interceptor, use per-origin dispatchers and cache stores, or disable shared caching on redirect-capable requests. | 19 Oct |
| CVE-2026-67231 | 9.1 critical | 0.00% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The trust-store plugin installs a verify_fun that overrides {bad_cert, unknown_ca} / {bad_cert, selfsigned_peer} when the presented cert "matches" a whitelisted one. The match key is extract_issuer_id/1 → public_key:pkix_issuer_id/2 → {IssuerName, SerialNumber} , both fields are taken verbatim from the presented certificate body and contain no public-key, SKI, fingerprint or signature material. is_whitelisted/1 is a pure ets:member lookup; the stored full DER is used only for list/0 display and is never compared against the presented cert. cacerts is [], so the whitelisted cert is never used as a trust anchor for path validation either. TLS client-authentication bypass: an attacker who knows the issuer DN + serial of any whitelisted certificate can connect with a forged self-signed cert. Preconditions include rabbitmq_trust_store plugin enabled and used as the TLS verify_fun Attacker knows or can guess the {Issuer, Serial} of at least one whitelisted cert (non-secret; exposed via CLI/logs/any cert copy). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | 19 Oct |
| CVE-2026-46266 | 9.1 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP Yizhou Zhao reported that simply having one RAW socket on protocol IPPROTO_RAW (255) was dangerous. socket(AF_INET, SOCK_RAW, 255); A malicious incoming ICMP packet can set the protocol field to 255 and match this socket, leading to FNHE cache changes. inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST") pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner "man 7 raw" states: A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able to send any IP protocol that is specified in the passed header. Receiving of all IP protocols via IPPROTO_RAW is not possible using raw sockets. Make sure we drop these malicious packets. | 19 Oct |
| CVE-2026-43071 | 9.1 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_dir+0x1d/0x1c0 pinctrl_init+0x6d/0x140 do_one_initcall+0x6d/0x3d0 kernel_init_freeable+0x39f/0x460 kernel_init+0x2a/0x260 There will be only one bucket in dentry_hashtable when dhash_entries is set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then, following process will access more than one buckets(which memory region is not allocated) in dentry_hashtable: d_lookup b = d_hash(hash) dentry_hashtable + ((u32)hashlen >> d_hash_shift) // The C standard defines the behavior of right shift amounts // exceeding the bit width of the operand as undefined. The // result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen', // so 'b' will point to an unallocated memory region. hlist_bl_for_each_entry_rcu(b) hlist_bl_first_rcu(head) h->first // read OOB! Fix it by limiting the minimal number of dentry_hashtable bucket to two, so that 'd_hash_shift' won't exceeds the bit width of type u32. | 19 Oct |
| CVE-2026-90230 | 9.1 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate() nvmet_execute_auth_send() allocates the DH-HMAC-CHAP message buffer with the host-supplied transfer length (tl) and hands it to nvmet_auth_negotiate() without passing tl along. nvmet_auth_negotiate() then reads the negotiate header and, for each of the halen hash identifiers and dhlen DH group identifiers, indexes into the fixed idlist[60] array (hashes at idlist[0..halen), groups at idlist[30..]). Neither the transfer length nor halen/dhlen is validated. A malicious or non-conformant host can report a tl smaller than the negotiate structure, or a halen/dhlen larger than the array (both are u8, up to 255), making the loops read past the end of the allocated buffer (heap out-of-bounds read). The sibling nvmet_auth_reply() already validates tl against the structure size; the negotiate path did not. Pass tl into nvmet_auth_negotiate(), reject a tl that does not cover the negotiate data plus one full protocol descriptor, and reject halen/dhlen larger than NVME_AUTH_DHCHAP_MAX_DH_IDS. | 19 Oct |
| CVE-2025-20359 | 9.1 critical | 0.00% | cisco, snort | Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the disclosure of possible sensitive data or cause the Snort 3 Detection Engine to crash. This vulnerability is due to an error in the logic of buffer handling when the MIME fields of the HTTP header are parsed. This can result in a buffer under-read. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to induce one of two possible outcomes: the unexpected restarting of the Snort 3 Detection Engine, which could cause a denial of service (DoS) condition, or information disclosure of sensitive information in the Snort 3 data stream. Due to the under-read condition, it is possible that sensitive information that is not valid connection data could be returned. | 18 Oct |
| CVE-2026-75866 | 9.1 critical | 0.00% | no CPE yet | Punk::OAuth2::Server versions through 0.03 for Perl issue access tokens outside a client's registered scopes and grant types because no authorization path reads them. Punk::OAuth2::Server::Store registers scopes and grant_types per client and documents both as client registration. token dispatches on the grant_type in the request body, so a client registered for authorization_code alone can ask for client_credentials, and that arm passes the requested scope straight to the minter, which signs it into the at+jwt access token. authorize copies the query scope into the authorization code record without comparing it against the registration, leaving the optional consent hook as the only check between an arbitrary scope and the issued code. redirect_uris on the same client row is read and enforced. A registered client can obtain a correctly signed token carrying any scope it names, and a resource server running Punk::OAuth2::Checker accepts that token and honours the scope. A client registered without a secret authenticates on its client_id alone, so anyone who knows that identifier can request one. | 15 Oct |
| CVE-2026-75870 | 9.1 critical | 0.00% | no CPE yet | Punk versions before 0.18 for Perl allow session cookie forgery via an empty default HMAC key when a session is declared without a secret. The session keyword freezes its options onto the application as given: it does not require a secret, warn, or refuse to start when one is absent. The cookie read and the write-back both default that key to the empty string, so a declaration with no secret option, or with an undefined or empty one, signs and verifies with a zero-length HMAC-SHA256 key. An attacker who knows the cookie format can then mint one offline carrying any contents the session holds, such as a user identifier or a role. Nothing marks the misconfiguration at runtime: cookies are well formed and sessions round-trip as expected. | 14 Oct |
| CVE-2025-12999 | 9.1 critical | 0.00% | no CPE yet | UrlUtil.getBaseUrl builds the absolute URLs in a response — download links, icons, asset and API URLs — from the X-Forwarded-Host, X-Forwarded-Proto and X-Forwarded-Prefix request headers, with no check on whether the sender was a trusted proxy, falling back to the client-supplied Host header. Those responses are cached under keys that do not include the host (extension.json since 0.6.0, namespace.details.json since 0.9.0, sitemap since 0.14.5, latest.extension.version.vscode since 0.34.2). A single request carrying a forged header therefore places attacker-chosen URLs into an entry served to every other client for the lifetime of that entry — one hour by default, and cluster-wide where ovsx.redis.enabled is set. The VSIX download URL, its signature URL and the public key URL are all derived from the same base URL, so extension signing does not limit the impact: an attacker who poisons an entry supplies the package, the signature over it, and the key used to verify it. Exploitability depends on deployment topology. A server reachable directly by clients, or fronted by a proxy that relays the client's X-Forwarded-Host rather than overwriting it, is exploitable by an unauthenticated remote attacker. A proxy that overwrites the header is not. An unauthenticated attacker can poison Open VSX's per-extension metadata cache with attacker-controlled download, signature, and public-key URLs by supplying a crafted X-Forwarded-Host header, causing downstream VS Code-compatible editors to fetch and install a malicious VSIX. Workarounds (unpatched versions) 1. Configure the reverse proxy to set rather than relay X-Forwarded-Host, X-Forwarded-Proto and X-Forwarded-Prefix — note that nginx's $host is the client's Host header and is not a safe value. 2. Ensure the server is not reachable except through that proxy. 3. Flush the caches afterwards; poisoned entries survive the configuration change. | 14 Oct |
| CVE-2026-54454 | 9.1 critical | 0.00% | no CPE yet | OpenCATS is an open-source applicant tracking system and recruitment CRM for staffing agencies and hiring teams. Prior to 0.10.0, the OpenCATS Import module in modules/import/ImportUI.php can preserve an uploaded file's original name for one import data type and place the file in the web-accessible temporary directory. An authenticated user with Import privileges can select the affected import path and upload a PHP file that remains under an attacker-controlled executable filename, and an import error can leave the file on disk. If the temporary directory is served with PHP execution enabled, requesting the staged file can execute arbitrary PHP code with the web server process privileges, exposing or modifying recruiting data and the host system. This issue is fixed in version 0.10.0. | 13 Oct |
| CVE-2026-85121 | 9.1 critical | 0.00% | no CPE yet | The Insurify WordPress plugin through 1.0 does not have authorisation and nonce checks on one of its AJAX actions, allowing unauthenticated users to create and overwrite arbitrary WordPress options with request data, which can take the site offline and deactivate all of its Insurify WordPress plugin through 1.0. | 13 Oct |
| CVE-2026-86706 | 9.1 critical | 0.00% | no CPE yet | The Quick quotes WordPress plugin through 1.0.0 does not perform any capability or nonce check on one of its AJAX actions and lets the caller choose which option is written, allowing unauthenticated users to alter arbitrary site settings and to make the site unavailable. | 13 Oct |
| CVE-2026-86717 | 9.1 critical | 0.00% | no CPE yet | The Insurify WordPress plugin through 1.0 does not have authorisation and nonce checks on one of its AJAX actions, allowing unauthenticated users to delete arbitrary WordPress options, which can take the site offline and strip every user of their role. | 13 Oct |
| CVE-2026-105835 | 9.1 critical | 0.00% | no CPE yet | PLANKA 2.2.0 through 2.2.1 fails to limit incorrect TOTP codes submitted to POST /api/access-tokens/verify-totp, allowing attackers to brute force two-factor authentication codes. Attackers who know a user's password can reuse the ten-minute pending token to guess six-digit codes until one succeeds, obtaining a full access token. | 9 Oct |
| CVE-2025-11717 | 9.1 critical | 0.00% | mozilla, firefox | When switching between Android apps using the card carousel Firefox shows a black screen as its card image when a password-related screen was the last one being used. Prior to Firefox 144 the password edit screen was visible. This vulnerability was fixed in Firefox 144. | 8 Oct |
| CVE-2026-34971 | 9.0 critical | 0.00% | bytecodealliance, wasmtime | Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | Mon 26 Oct |
| CVE-2026-50737 | 9.0 critical | 0.00% | enterprisedb, pglogical | When applying replicated changes for a row that is missing one or more columns, pglogical evaluates the affected table's default expressions on the subscriber. Because the apply worker runs at a privilege level equivalent to a PostgreSQL superuser in default installations, any function invoked by such a default expression also runs at that privilege. A party acting as the publisher can use this path to cause functions to be executed on the subscriber as superuser, escalating from a role permitted to use pglogical to full superuser. This is a second, independent path to the same superuser escalation tracked under CVE-2026-50736 (the pglogical queue issue). To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles. | 23 Oct |
| CVE-2026-18691 | 9.0 critical | 0.00% | mongodb | An issue in MongoDB Server's intra-cluster connection setup could allow a party with suitable network access to influence which authentication mechanism is used when one replica set member connects to another. Under certain conditions, this could cause the cluster's shared internal credential to be transmitted in a less-protected form, potentially allowing that credential to be recovered. If recovered, the credential could be used to authenticate as the internal superuser to nodes in the deployment. | 23 Oct |
| CVE-2026-94267 | 9.0 critical | 0.00% | no CPE yet | The Advanced Custom Fields: Extended WordPress plugin before 0.9.2.8, Advanced Custom Fields: Extended PRO WordPress plugin before 0.9.2.8 does not perform any capability check when updating a post through one of its front-end form actions, allowing unauthenticated visitors to overwrite arbitrary posts, including the ones in which the site stores its own field definitions, which in turn leads to arbitrary code execution on the server. Exploitation requires the site to publish a form whose post-update action maps both its target and its content to visitor-submitted values. | 23 Oct |
| CVE-2026-72772 | 8.9 high | 0.00% | n8n | n8n before 2.32.1 (and before 2.31.5) is vulnerable to account takeover via the Token Exchange Embed Login feature. When a validly-signed incoming token was matched to a local account by its email claim, the service did not verify that the email claim was verified, nor that the trusted key's permitted role ceiling covered that account. As a result, anyone able to obtain a token accepted by a configured trusted key (for example, a trusted issuer emitting unverified email addresses) could authenticate as any existing user and gain full account control. This issue only affects instances where the embed login feature is enabled and at least one trusted key source is configured. | 24 Oct |
| CVE-2025-30156 | 8.9 high | 0.00% | no CPE yet | Ceph is an open-source distributed storage platform providing object, block, and file storage. In versions prior to 20.2.4 and 19.2.6, the CephX authentication protocol encrypts tickets with AES-128-CBC in an unauthenticated mode that uses a hard-coded initialization vector and no message authentication, allowing an attacker to forge credentials and gain cluster-wide access. Because the ciphertext is malleable and the monitor will encrypt attacker-chosen entity names, an attacker holding one low-privilege key and able to observe CephX traffic can use the monitor as an encryption oracle and splice ciphertext blocks into valid tickets for privileged entities such as Manager, MDS, and OSD. The same lack of authentication also lets an attacker with CephX permissions escalate privileges by flipping a single bit in a service ticket to set its allow_all field to true. This issue is fixed in versions 20.2.4 and 19.2.6. | 19 Oct |
| CVE-2025-66509 | 8.9 high | 0.00% | laradashboard, lara_dashboard | LaraDashboard is an all-In-one solution to start a Laravel Application. In 2.3.0 and earlier, the password reset flow trusts the Host header, allowing attackers to redirect the administrator’s reset token to an attacker-controlled server. This can be combined with the module installation process to automatically execute the ServiceProvider::boot() method, enabling arbitrary PHP code execution. | 18 Oct |
| CVE-2026-76010 | 8.8 high | — | smub, photo gallery, sliders, proofing and themes – nextgen gallery | The Photo Gallery, Sliders, Proofing and Themes – NextGEN Gallery plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.4.1 via the render_image function. This is due to unrestricted mass assignment of caller-supplied meta_data keys onto the image model combined with missing realpath containment in path construction and a bypassable signature check on the public image delivery route. This makes it possible for authenticated attackers, with custom-level access and above, to execute code on the server. Exploitation requires the authenticated attacker to own at least one NextGEN gallery — a condition that can be satisfied by any Subscriber who was ever granted the 'NextGEN Manage gallery' capability, and that access is retained indefinitely due to the stored gallery-author equality fallback in _can_manage_gallery() even after the capability is revoked. | 7 h ago |
| CVE-2026-97409 | 8.8 high | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Do not cancel requests in io target before it is initialized A new nvme-fc controller in CONNECTING state sees admin request timeout schedules ctrl->ioerr_work to abort inflight requests. This ends up calling __nvme_fc_abort_outstanding_ios() which aborts requests in both admin and io tagsets. In case fc_ctrl->tag_set was not initialized we see the warning below. This is because ctrl.queue_count is initialized early in nvme_fc_alloc_ctrl(). nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6). you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc] Call Trace: <TASK> dump_stack_lvl+0x57/0x80 register_lock_class+0x567/0x580 __lock_acquire+0x330/0xb90 lock_acquire.part.0+0xad/0x210 blk_mq_tagset_busy_iter+0xf9/0xc00 __nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc] nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc] process_one_work+0x82c/0x1450 worker_thread+0x5ee/0xfd0 kthread+0x3a0/0x750 ret_from_fork+0x439/0x670 ret_from_fork_asm+0x1a/0x30 </TASK> Update the check in __nvme_fc_abort_outstanding_ios() confirm that io tagset was created before iterating over busy requests. Also make sure to cancel ctrl->ioerr_work before removing io tagset. | Fri 30 Oct |
| CVE-2025-37952 | 8.8 high | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix UAF in __close_file_table_ids A use-after-free is possible if one thread destroys the file via __ksmbd_close_fd while another thread holds a reference to it. The existing checks on fp->refcount are not sufficient to prevent this. The fix takes ft->lock around the section which removes the file from the file table. This prevents two threads acquiring the same file pointer via __close_file_table_ids, as well as the other functions which retrieve a file from the IDR and which already use this same lock. | Fri 30 Oct |
| CVE-2025-21969 | 8.8 high | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837 CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci1 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline] l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline] l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline] hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5837: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726 hci_event_func net/bluetooth/hci_event.c:7473 [inline] hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated--- | Fri 30 Oct |
| CVE-2024-53224 | 8.8 high | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Move events notifier registration to be after device registration Move pkey change work initialization and cleanup from device resources stage to notifier stage, since this is the stage which handles this work events. Fix a race between the device deregistration and pkey change work by moving MLX5_IB_STAGE_DEVICE_NOTIFIER to be after MLX5_IB_STAGE_IB_REG in order to ensure that the notifier is deregistered before the device during cleanup. Which ensures there are no works that are being executed after the device has already unregistered which can cause the panic below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 630071 Comm: kworker/1:2 Kdump: loaded Tainted: G W OE --------- --- 5.14.0-162.6.1.el9_1.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 02/27/2023 Workqueue: events pkey_change_handler [mlx5_ib] RIP: 0010:setup_qp+0x38/0x1f0 [mlx5_ib] Code: ee 41 54 45 31 e4 55 89 f5 53 48 89 fb 48 83 ec 20 8b 77 08 65 48 8b 04 25 28 00 00 00 48 89 44 24 18 48 8b 07 48 8d 4c 24 16 <4c> 8b 38 49 8b 87 80 0b 00 00 4c 89 ff 48 8b 80 08 05 00 00 8b 40 RSP: 0018:ffffbcc54068be20 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff954054494128 RCX: ffffbcc54068be36 RDX: ffff954004934000 RSI: 0000000000000001 RDI: ffff954054494128 RBP: 0000000000000023 R08: ffff954001be2c20 R09: 0000000000000001 R10: ffff954001be2c20 R11: ffff9540260133c0 R12: 0000000000000000 R13: 0000000000000023 R14: 0000000000000000 R15: ffff9540ffcb0905 FS: 0000000000000000(0000) GS:ffff9540ffc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010625c001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_gsi_pkey_change+0x20/0x40 [mlx5_ib] process_one_work+0x1e8/0x3c0 worker_thread+0x50/0x3b0 ? rescuer_thread+0x380/0x380 kthread+0x149/0x170 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_fwctl(OE) fwctl(OE) ib_uverbs(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlx_compat(OE) psample mlxfw(OE) tls knem(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache netfs qrtr rfkill sunrpc intel_rapl_msr intel_rapl_common rapl hv_balloon hv_utils i2c_piix4 pcspkr joydev fuse ext4 mbcache jbd2 sr_mod sd_mod cdrom t10_pi sg ata_generic pci_hyperv pci_hyperv_intf hyperv_drm drm_shmem_helper drm_kms_helper hv_storvsc syscopyarea hv_netvsc sysfillrect sysimgblt hid_hyperv fb_sys_fops scsi_transport_fc hyperv_keyboard drm ata_piix crct10dif_pclmul crc32_pclmul crc32c_intel libata ghash_clmulni_intel hv_vmbus serio_raw [last unloaded: ib_core] CR2: 0000000000000000 ---[ end trace f6f8be4eae12f7bc ]--- | Fri 30 Oct |
| CVE-2026-58255 | 8.8 high | 0.00% | no CPE yet | Cronicle is a multi-server task scheduler and runner, with a web based front-end UI. Prior to 0.9.121, a non-administrator user or scoped API key with `create_events` and `run_events` privileges can inject top-level `uid` and `gid` fields through `/api/app/create_event` or `/api/app/update_event`. In `lib/api.js`, `requireValidEventData` uses `validateOptionalParams` as a partial allow-list that silently passes unknown keys, storing the injected fields verbatim. In `lib/job.js`, `launchJob` copies the whole event into the job, and a plugin `uid` overrides the event `uid` only when the plugin defines one. The default `shellplug` and `urlplug` plugins do not define a `uid`, so the event-controlled identity survives into child-process launch. On a root-daemon installation, this lets a low-privileged user run jobs as arbitrary users, including root, bypassing the otherwise administrator-only run-as-user control. This API-side event injection is distinct from the job-output `uid`/`gid` injection addressed by CVE-2026-39401. This issue is fixed in version 0.9.121. | Wed 28 Oct |
| CVE-2026-40352 | 8.8 high | 0.00% | fastgpt | FastGPT is an AI Agent building platform. In versions prior to 4.14.9.5, the password change endpoint is vulnerable to NoSQL injection. An authenticated attacker can bypass the "old password" verification by injecting MongoDB query operators. This allows an attacker who has gained a low-privileged session to change the password of their account (or others if combined with ID manipulation) without knowing the current one, leading to full account takeover and persistence. This issue has been fixed in version 4.14.9.5. | Mon 26 Oct |
| CVE-2026-63944 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs). | Mon 26 Oct |
| CVE-2026-33760 | 8.8 high | 0.00% | langflow | Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.0, Langflow's /api/v1/monitor router exposes 7 endpoints that perform read, write, and delete operations on user-owned resources — messages, sessions, build artifacts, and LLM transaction logs — without verifying that the authenticated requester owns the targeted resource. Any authenticated user can read, modify, rename, or permanently delete another user's data by supplying the target's resource ID or flow_id. This is a classic IDOR/BOLA vulnerability. Notably, the same source file (monitor.py) contains one correctly-implemented endpoint that uses an ownership check, demonstrating the correct pattern was known but inconsistently applied. This vulnerability is fixed in 1.9.0. | Mon 26 Oct |
| CVE-2026-16909 | 8.8 high | 0.00% | ibm, vios, aix | IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to an off-by-one error in bounds checking. | Mon 26 Oct |
| CVE-2026-47399 | 8.8 high | 0.00% | no CPE yet | PraisonAI Platform is the platform layer for the PraisonAI multi-agent teams system. Prior to version 0.1.4, the workspace-scoped REST routes contain a systemic object-level authorization flaw that allows an authenticated user from one workspace to access, modify, and delete objects belonging to another workspace by supplying the victim object's global UUID. The affected pattern appears in workspace-scoped routes such as agents, projects, issues, and comments. The route layer verifies that the caller is a member of the `workspace_id` provided in the URL, but the service layer later resolves the target object by global object ID only. It does not verify that the resolved object actually belongs to the workspace in the URL. As a result, a valid member of `workspace_attacker` can call a route under `/api/v1/workspaces/{workspace_attacker}/...` while supplying an object UUID from `workspace_victim`. The server authorizes the request based on membership in `workspace_attacker`, then fetches or mutates the victim object by global UUID. This breaks the platform's workspace isolation boundary. PraisonAI Platform version 0.1.4 patches the issue. | Sat 24 Oct |
| CVE-2026-70456 | 8.8 high | 0.00% | no CPE yet | rsync 3.0.1 before 3.5.0 contains an out-of-bounds write vulnerability in the read_args() function that allows a malicious sender to corrupt adjacent heap memory by sending a crafted argument list. When the argument count causes the argv allocation to be exactly full, the trailing NULL terminator is written one slot beyond the allocation boundary, corrupting adjacent heap memory. | Sat 24 Oct |
| CVE-2026-64438 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. | 24 Oct |
| CVE-2026-49258 | 8.8 high | 0.00% | no CPE yet | Nebula Mesh is a self-hosted control plane for the Slack Nebula mesh VPN. In versions 0.3.5 and below, the web UI (/ui/*) does not apply the per-operator CA scoping employed by the JSON API. This was partially addressed by GHSA-598g-h2vc-h5vg, but the changes were not implemented in the web read/mutation surface. Any authenticated non-admin operator (for example, one created via self-registration or OIDC) can access resources belonging to other operators. The host create/edit/mobile-bundle/network-create paths and all CA-management routes were already correctly scoped. A malicious operator could block or delete any other operator's host, or read any operator's hosts and networks. This issue has been fixed in version 0.3.6. | 23 Oct |
| CVE-2026-48169 | 8.8 high | 0.00% | no CPE yet | PraisonAI is a multi-agent teams system. Versions prior to 0.1.4 of the PraisonAI Platform API have two authorization failures that together break workspace isolation. The service layer for issues and projects performs global primary-key lookups without checking workspace ownership, so any authenticated user can read, modify, and delete resources in any workspace just by swapping UUIDs in their API requests. On top of that, every member management endpoint (add, update role, remove) only requires `min_role="member"`, which lets any workspace member promote themselves to owner and kick out the original owner. A low-privilege member of one workspace can steal data from every other workspace and take over any workspace they belong to. Both issues come from the same gap: the route layer pulls `workspace_id` from the URL and verifies membership, but the service layer ignores the workspace scope for resource lookups and ignores the caller's role level for member operations. The `require_workspace_member()` dependency does its job correctly. The problem is that the service layer doesn't use the information it provides. Version 0.1.4 of the PraisonAI Platform API patch the issue. | 23 Oct |
| CVE-2026-63831 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis. | 22 Oct |
| CVE-2026-63829 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK. | 22 Oct |
| CVE-2026-113779 | 8.8 high | 0.00% | no CPE yet | The pfSense REST API package is an unofficial, open-source REST and GraphQL API for pfSense CE and pfSense Plus firewalls. A privilege escalation vulnerability in pfSense-pkg-RESTAPI prior to version 2.9.0 allows authenticated accounts holding the dedicated settings sync permission to modify REST API configuration secrets. This enables a non-administrative user to elevate their privileges to a full administrator. pfSense-pkg-RESTAPI 2.9.0 patches the issue. Access to the HA settings sync endpoint now strictly requires full administrative privileges (`page-all`). The sub-administrative sync privilege has been removed in versions v2.9.0 and later. In addition to correcting the access control boundary, version 2.9.0 includes the following hardening measures: opt-in default and format and validation modernization. As a workaround, one may mitigate exposure by taking either or all of the following steps. Revoke Scoped Permissions: Remove the `api-v2-system-restapi-settings-sync-post` privilege from all non-administrative users. Apply ACLs: Configure REST API Access Control Lists (ACLs) and/or firewall rules to restrict access to API endpoints exclusively to trusted administrator and HA peer IP addresses. | 22 Oct |
| CVE-2026-21582 | 8.8 high | 0.00% | no CPE yet | This High severity BASM (Broken Authentication & Session Management) vulnerability known as CVE-2026-21582 was introduced in version 7.2.1 of Crowd Data Center. This BASM (Broken Authentication & Session Management) vulnerability, with a CVSS Score of 8.8, allows an unauthenticated attacker to perform actions as another user. Atlassian recommends that Crowd Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Crowd Data Center 7.2: Upgrade to a release greater than or equal to 7.2.2 See the release notes (https://confluence.atlassian.com/crowd/crowd-release-notes-199094.html). You can download the latest version of Crowd Data Center from the download center (https://www.atlassian.com/software/crowd/download-archive). This vulnerability was reported via our Penetration Testing program. | 22 Oct |
| CVE-2026-50191 | 8.8 high | 0.00% | no CPE yet | 4gaBoards is a boards system for realtime project management. Prior to 3.3.8, 4gaBoards is vulnerable to pre-account takeover when registrationEnabled, localRegistrationEnabled, and ssoRegistrationEnabled are enabled and Google, GitHub, Microsoft, or OIDC SSO is configured. The POST /api/register endpoint permits creation of an unverified local account with a victim's email address, and POST /api/access-tokens permits that account to authenticate while isVerified is false. During the victim's first SSO login, server/api/helpers/users/get-create-one-for-github-sso.js, server/api/helpers/users/get-create-one-for-google-sso.js, server/api/helpers/users/get-create-one-for-microsoft-sso.js, and server/api/helpers/users/get-create-one-for-oidc-sso.js find the attacker-controlled account by email and link the verified SSO identity without confirming ownership of the local account. The attacker can retain local-password access to the linked account and obtain the victim's projects, data, and permissions. This issue is fixed in version 3.3.8. | 22 Oct |
| CVE-2026-85683 | 8.8 high | 0.00% | no CPE yet | The Jane Menu WordPress plugin before 1.5.1 does not have any capability or nonce checks on one of its form handlers, which is reachable by unauthenticated users, allowing them to bind any published page to a remote document of their choosing. The plugin then fetches that document and outputs its head and body into the page without escaping, so an unauthenticated attacker can run arbitrary JavaScript in the browser of any visitor to that page, including an administrator. | 21 Oct |
| CVE-2026-43249 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: 9p/xen: protect xen_9pfs_front_free against concurrent calls The xenwatch thread can race with other back-end change notifications and call xen_9pfs_front_free() twice, hitting the observed general protection fault due to a double-free. Guard the teardown path so only one caller can release the front-end state at a time, preventing the crash. This is a fix for the following double-free: [ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none) [ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150 [ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42 [ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246 [ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000 [ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000 [ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000 [ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68 [ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040 [ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000 [ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660 [ 27.052418] Call Trace: [ 27.052420] <TASK> [ 27.052422] xen_9pfs_front_changed+0x5d5/0x720 [ 27.052426] ? xenbus_otherend_changed+0x72/0x140 [ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10 [ 27.052434] xenwatch_thread+0x94/0x1c0 [ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10 [ 27.052442] kthread+0xf8/0x240 [ 27.052445] ? __pfx_kthread+0x10/0x10 [ 27.052449] ? __pfx_kthread+0x10/0x10 [ 27.052452] ret_from_fork+0x16b/0x1a0 [ 27.052456] ? __pfx_kthread+0x10/0x10 [ 27.052459] ret_from_fork_asm+0x1a/0x30 [ 27.052463] </TASK> [ 27.052465] Modules linked in: [ 27.052471] ---[ end trace 0000000000000000 ]--- | 21 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.