Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-53362KEVexploit | 7.8 high | 1.0% | linux, siemens, linux_kernel, simatic_s7-1500_tm_mfp_firmware | In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. | 15 Oct |
| CVE-2022-1292exploit ×5 | 7.3 high | 83.0% | siemens, openssl, brownfield_connectivity_gateway, debian_linux | The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). | 14 Oct |
| CVE-2023-0464exploit | 7.5 high | 4.0% | openssl | A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function. | 14 Oct |
| CVE-2026-40047exploit | 9.1 critical | 2.0% | apache, camel | Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component. The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth. This issue affects Apache Camel: from 4.15.0 before 4.18.3. Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers. | Sun 25 Oct |
| CVE-2026-68136exploit | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: gro: fix double aggregation of flush-marked skbs Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO packet.") added a flush check to skb_gro_receive(), but skb_gro_receive_list() lacks the same validation. As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be re-aggregated. This allows already-GRO'd packets with existing frag_list to be re-aggregated into a new GRO session, corrupting the frag_list chain structure. When skb_segment() attempts to unpack these malformed packets, it encounters invalid state and triggers a kernel panic. Scenario (Tethering/Device forwarding): 1. Driver: Generated aggregated packet P1 via LRO with frag_list 2. Dev A: Receives aggregated fraglist packet and flush flag set 3. Dev A: Re-enters GRO, skb_gro_receive_list() is called 4. Missing flush check allows re-aggregation despite flush flag 5. Frag_list chain becomes corrupted (loops or dangling refs) 6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list Root cause in skb_segment(): The check at line ~4891: if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) && (skb_headlen(list_skb) == len || sg)) { When frag_list is corrupted by double aggregation, when list_skb is a NULL pointer from skb->next, skb_headlen(list_skb) dereference NULL/corrupted pointers occurs. Call Trace: skb_headlen(NULL skb) skb_segment tcp_gso_segment tcp4_gso_segment inet_gso_segment skb_mac_gso_segment __skb_gso_segment skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit qdisc_restart __qdisc_run qdisc_run net_tx_action Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in skb_gro_receive_list(), matching the defensive programming pattern of skb_gro_receive(). | 19 Oct |
| CVE-2026-17566exploit | 9.4 critical | 1.0% | pgadmin, pgadmin_4 | pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor). The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing. This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18. | 23 Oct |
| CVE-2026-67184exploit | 8.7 high | 1.0% | no CPE yet | TinyWeb through 0.0.8 contains a null pointer dereference vulnerability that allows unauthenticated remote attackers to crash worker processes by sending a malformed HTTP request line with an invalid version string. The HttpParser::execute() function fails to allocate the Url object when version parsing fails, leaving the url pointer NULL, and buildResponse() subsequently dereferences this NULL pointer without checking the valid_requ flag, producing a SIGSEGV that terminates the worker process and, when repeated across all workers, takes the server permanently offline until manually restarted. | 23 Oct |
| CVE-2026-90932exploit | 8.6 high | 1.0% | laradashboard | LaraDashboard versions 0.9.2 through 1.2.2 contain a path traversal vulnerability in the core-upgrade backup handling. CoreUpgradeController and BackupService (e.g. BackupService::deleteBackup()) concatenate the user-supplied backup_file/filename value directly onto the backup directory path without normalisation, without applying basename(), and without verifying that the resolved path remains inside storage/app/core-backups; the corresponding form requests only validate the value as a bounded string. An authenticated user holding only the delegated settings.edit permission (not Superadmin) can supply ../ traversal sequences to delete arbitrary files reachable on the host filesystem, including outside the application tree, or to restore a ZIP archive from an arbitrary on-disk location, writing arbitrary files into the application directories and achieving remote code execution. Note: the advisory states the vulnerable concatenation was introduced in the v0.9.7 release line. Fixed in 1.3.0. | Thu 29 Oct |
| CVE-2026-46529exploit | 8.4 high | 1.0% | no CPE yet | Atril Document Viewer is the default document reader of the MATE desktop environment for Linux. A single-click remote code execution vulnerability in versions prior to 1.26.3 and 1.28.4 allows an attacker to achieve arbitrary code execution as the user by tricking them into clicking a link inside a malicious PDF document. The PDF can be packaged as a polyglot file that is simultaneously a valid PDF and a valid ELF shared library, making the attack a single-file, single-click, configuration-independent RCE on stock atril installations. The root cause is `shell/ev-application.c:ev_spawn`, which builds a command line from attacker-controlled PDF link-destination fields without applying `g_shell_quote`. The cmdline is then handed to `g_app_info_create_from_commandline`, which shell-parses it back into argv — splitting any embedded `--gtk-module=PATH` into a separate argv element. GTK then `dlopen()`s the path during init, running any `__attribute__((constructor))` it finds. Versions 1.26.3 and 1.28.4 contain a patch for the issue. This is the same defect class as CVE-2023-51698 (CBT `--checkpoint-action` injection in `comics-document.c`, fixed in 1.6.2) but in a different code path (`shell/ev-application.c`) that the original patch did not touch. | Mon 26 Oct |
| CVE-2026-42527exploit | 8.1 high | 1.0% | apache, camel | Deserialization of Untrusted Data vulnerability in Apache Camel. The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository). This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**). | Sun 25 Oct |
| CVE-2026-67363exploit | 7.7 high | 1.0% | no CPE yet | Joomla Extension - balbooa.com - Pre-auth Payment Amount Tampering in Balbooa Forms < 2.4.3.2 - The stripeCharges and payAuthorize endpoints accept the charge total from a client-controlled request parameter and forward it to the payment gateway without recomputing it from the form's configured product prices. Neither endpoint enforces authentication or CSRF checks. An unauthenticated attacker can purchase any priced item for an arbitrary amount (e.g., $0.01), and can additionally forge line items, quantities, and shipping. | 23 Oct |
| CVE-2026-67182exploit | 6.9 medium | 1.0% | no CPE yet | Rouille 0.3.3 through 3.6.2 contains an HTTP request smuggling vulnerability that allows remote attackers to bypass access controls by injecting bare line feed characters (0x0A) into client-supplied request header values that are copied verbatim to upstream connections without validation. Attackers can craft a header value containing a complete additional HTTP request that is interpreted as a separate request by backends such as Go net/http and Python http.server, causing the backend to process a smuggled request with attacker-chosen method, path, and headers that bypasses the rouille handler's access control logic. | 23 Oct |
| CVE-2026-59230exploit | 6.5 medium | 1.0% | apache, camel | Improper input validation vulnerability in Apache Camel. This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel*”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input. | 12 Oct |
| CVE-2025-0690exploit | 6.1 medium | 1.0% | no CPE yet | The read command is used to read the keyboard input from the user, while reads it keeps the input length in a 32-bit integer value which is further used to reallocate the line buffer to accept the next character. During this process, with a line big enough it's possible to make this variable to overflow leading to a out-of-bounds write in the heap based buffer. This flaw may be leveraged to corrupt grub's internal critical data and secure boot bypass is not discarded as consequence. | 21 Oct |
| CVE-2025-64714exploit | 5.8 medium | 1.0% | no CPE yet | PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Starting in version 1.7.7 and prior to version 2.0.3, an unauthenticated Local File Inclusion exists in the template-switching feature. If `templateselection` is enabled in the configuration, the server trusts the `template` cookie and includes the referenced PHP file. An attacker can read sensitive data or, if they manage to drop a PHP file elsewhere, gain remote code execution. The constructed path of the template file is checked for existence, then included. For PrivateBin project files this does not leak any secrets due to data files being created with PHP code that prevents execution, but if a configuration file without that line got created or the visitor figures out the relative path to a PHP script that directly performs an action without appropriate privilege checking, those might execute or leak information. The issue has been patched in version 2.0.3. As a workaround, set `templateselection = false` (which is the default) in `cfg/conf.php` or remove it entirely | 19 Oct |
| CVE-2025-68434exploit | 8.8 high | 0.00% | opensourcepos, open_source_point_of_sale | Open Source Point of Sale (opensourcepos) is a web based point of sale application written in PHP using CodeIgniter framework. Starting in version 3.4.0 and prior to version 3.4.2, a Cross-Site Request Forgery (CSRF) vulnerability exists in the application's filter configuration. The CSRF protection mechanism was **explicitly disabled**, allowing the application to process state-changing requests (POST) without verifying a valid CSRF token. An unauthenticated remote attacker can exploit this by hosting a malicious web page. If a logged-in administrator visits this page, their browser is forced to send unauthorized requests to the application. A successful exploit allows the attacker to silently create a new Administrator account with full privileges, leading to a complete takeover of the system and loss of confidentiality, integrity, and availability. The vulnerability has been patched in version 3.4.2. The fix re-enables the CSRF filter in `app/Config/Filters.php` and resolves associated AJAX race conditions by adjusting token regeneration settings. As a workaround, administrators can manually re-enable the CSRF filter in `app/Config/Filters.php` by uncommenting the protection line. However, this is not recommended without applying the full patch, as it may cause functionality breakage in the Sales module due to token synchronization issues. | 13 Oct |
| CVE-2026-45033exploit | 8.5 high | 0.00% | github, copilot-cli | GitHub Copilot CLI brings AI-powered coding assistance directly to your command line. Prior to 1.0.43, a security vulnerability has been identified in GitHub Copilot CLI where a malicious bare git repository nested inside a project directory can achieve arbitrary code execution when the agent performs git operations. By exploiting git's automatic bare repository discovery during directory traversal, an attacker can set core.fsmonitor or other executable config keys to run arbitrary commands without user awareness or approval. The vulnerability arises because git's core.fsmonitor config key (and 15+ similar keys such as core.hookspath, diff.external, merge.tool, etc.) can specify arbitrary shell commands that git will execute as part of normal operations like status, diff, or rev-parse. This vulnerability is fixed in 1.0.43. | Mon 26 Oct |
| CVE-2026-35570exploit | 8.4 high | 0.00% | gitlawb, openclaude | OpenClaude is an open-source coding-agent command line interface for cloud and local model providers. Versions prior to 0.5.1 have a logic flaw in `bashToolHasPermission()` inside `src/tools/BashTool/bashPermissions.ts`. When the sandbox auto-allow feature is active and no explicit deny rule is configured, the function returns an `allow` result immediately — before the path constraint filter (`checkPathConstraints`) is ever evaluated. This allows commands containing path traversal sequences (e.g., `../../../../../etc/passwd`) to bypass directory restrictions entirely. Version 0.5.1 contains a patch for the issue. | Mon 26 Oct |
| CVE-2026-43893exploit | 8.2 high | 0.00% | no CPE yet | exiftool-vendored provides cross-platform Node.js access to ExifTool. Prior to 35.19.0, exiftool-vendored starts ExifTool in -stay_open True -@ - mode, where arguments are read from stdin one per line. In affected versions, several caller-supplied strings were interpolated into ExifTool arguments without rejecting line delimiters. A newline or carriage return inside one of those strings could split a single intended argument into multiple ExifTool arguments, allowing argument injection. The fix also rejects NUL bytes as unsafe control characters. Applications that pass attacker-controlled strings to affected APIs may allow an attacker to make ExifTool read files accessible to the ExifTool process, or write output to attacker-chosen file system paths accessible to that process. No remote code execution has been demonstrated. This vulnerability is fixed in 35.19.0. | Mon 26 Oct |
| CVE-2026-78164exploit | 8.2 high | 0.00% | no CPE yet | Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components. Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. | 19 Oct |
| CVE-2026-53587exploit | 7.5 high | 0.00% | no CPE yet | libgit2 is a portable C implementation of the Git core methods provided as a linkable library with a solid API, allowing to build Git functionality into your application. Prior to 1.8.6 and 1.9.5, libgit2 performs a fixed-size strncmp in set_data in src/libgit2/transports/smart_pkt.c without first verifying that the smart-protocol pkt-line capability buffer contains 14 bytes. A malicious Git server can make bytes after the pkt-line complete object-format=, causing format_str to advance beyond the pkt-line and the following memchr length calculation to underflow. The resulting heap out-of-bounds walk can crash a client during the first refs-advertisement packet over HTTP, HTTPS, SSH, or the Git protocol. This issue is fixed in versions 1.8.6 and 1.9.5. | Mon 26 Oct |
| CVE-2026-31156exploit | 6.5 medium | 0.00% | openplcproject, openplc_v3_firmware | A path injection vulnerability exists in OpenPLC v3 (2c82b0e79c53f8c1f1458eee15fec173400d6e1a) as the binary program compiled from glue_generator.cpp does not perform any validation on the file path parameters passed via the command line. The user-controlled input parameters are directly passed to the underlying file operation functions (fopen/ifstream/ofstream) for file reading and writing. An attacker can exploit this vulnerability by constructing a malicious path to read arbitrary readable files. | 19 Oct |
| CVE-2026-91858exploit | 6.5 medium | 0.00% | no CPE yet | FopProducer transforms the incoming XSL-FO message body by creating a javax.xml.transform.TransformerFactory through TransformerFactory.newInstance() and enabling only FEATURE_SECURE_PROCESSING before running an identity transform over the body. On the JDK's built-in transformer, that feature alone already empties the accessExternalDTD and accessExternalStylesheet limits, so an external DTD or entity is refused. When a third-party JAXP TransformerFactory such as Saxon-HE is on the classpath, for example because the application also uses camel-xslt-saxon or camel-saxon, TransformerFactory.newInstance() returns that implementation instead, and FEATURE_SECURE_PROCESSING on its own does not restrict external resource access on it. A DOCTYPE with an external subset, or an external general entity, declared in the XSL-FO document is then resolved and expanded while the body is transformed. An external sender whose XSL-FO reaches a fop producer could therefore read files readable by the Camel process and cause the process to issue requests to hosts the document names. camel-fop does not bring such a factory itself, and excludes Xalan, so a default deployment using the JDK transformer is not affected; the issue is reachable only where another component has placed an alternative JAXP TransformerFactory on the classpath. Releases on the 4.14.x line and earlier reached end of life before this issue was resolved and do not receive a fix. | 19 Oct |
| CVE-2026-7669exploit | 6.3 medium | 0.00% | no CPE yet | A vulnerability was detected in sgl-project SGLang up to 0.5.9. Impacted is the function get_tokenizer of the file python/sglang/srt/utils/hf_transformers_utils.py of the component HuggingFace Transformer Handler. The manipulation of the argument trust_remote_code with the input False as part of Boolean results in code injection. The attack can be executed remotely. A high complexity level is associated with this attack. The exploitability is considered difficult. In get_tokenizer(), when the caller passes trust_remote_code=False and HuggingFace transformers v5 returns a TokenizersBackend instance (the generic fallback for tokenizer classes not in the registry), SGLang silently re-invokes AutoTokenizer.from_pretrained with trust_remote_code=True, overriding the caller's explicit security setting. A model repository containing a malicious tokenizer.py referenced via auto_map in tokenizer_config.json will execute arbitrary Python in the SGLang process during this second call. No log line or warning is emitted. The override affects all current SGLang versions because transformers==5.3.0 is pinned in pyproject.toml. Both tokenizer_mode="auto" and tokenizer_mode="slow" are affected. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2024-0684exploit | 5.5 medium | 0.00% | gnu, coreutils | A flaw was found in the GNU coreutils "split" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service. | 15 Oct |
| CVE-2026-95628exploit | 5.4 medium | 0.00% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. | Mon 26 Oct |
| CVE-2026-95629exploit | 5.4 medium | 0.00% | no CPE yet | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. | Mon 26 Oct |
| CVE-2026-66746exploit | 5.3 medium | 0.00% | no CPE yet | Rouille 0.4.0 through 3.6.2 contains an HTTP response splitting vulnerability that allows remote attackers to inject arbitrary response headers by embedding carriage return (0x0D) or line feed (0x0A) bytes into attacker-controlled input. Attackers can exploit percent-decoded query parameters reflected into response headers or inject bare LF characters into Cookie header values that are interpolated directly into Set-Cookie response headers, enabling cache poisoning, session fixation, and security header override attacks such as bypassing CSP or CORS policies. | Sat 24 Oct |
| CVE-2026-71569exploit | 4.8 medium | 0.00% | apache software foundation, apache camel | Server-Side Request Forgery (SSRF) vulnerability in Apache Camel A2A component. This issue affects Apache Camel: from 4.21.0 before 4.22.2. WebhookUrlValidator classified a push notification webhook host in two places that did not agree. A host written as an IP literal was matched against a list of string prefixes that named the IPv6 unique local range fc00::/7, while a host reached through a name was resolved and the resulting address classified with the InetAddress predicates isLoopbackAddress, isAnyLocalAddress, isLinkLocalAddress and isSiteLocalAddress. Those predicates do not cover the same ground as the prefix list: isSiteLocalAddress reports the deprecated fec0::/10 block and not the fc00::/7 unique local addresses that replaced it, and the JDK carries no predicate for them at all. The same address was therefore accepted or rejected depending on how it was written, and a webhook URL whose host name resolved into fc00::/7 passed a guard that refused the identical address given as a literal. PushNotificationDispatcher then sent the push notification to that address, together with any Authorization header carried in the same configuration, whose scheme and credentials the registering caller supplies. The webhook URL arrives as TaskPushNotificationConfig.url from the caller registering the push notification, so it is attacker-controlled, and allowLocalWebhookUrls is false by default, which is the configuration in which the guard is expected to hold. The response is not relayed back to the caller who registered the configuration, so what the gap yields is a blind outbound HTTPS request from the Camel process to an internal address the guard was written to refuse; reaching a service that way additionally requires that the name resolve into fc00::/7 in the target environment, that an HTTPS service be listening on that address, and that the TLS handshake succeed for the name being requested, which is why the severity is assessed medium. The same string pre-check was also wrong in the other direction: it matched the raw host string without first establishing that the host was an IP literal, so any name merely beginning with fc or fd, such as fcm.googleapis.com, was refused outright. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.21.x release line reached end of life before this issue was resolved and will not receive a fix, so deployments on it must move to a supported release. Both the literal and the resolved path now classify the address from its raw bytes with one shared classifier, which recognises fc00::/7 and the shared address space 100.64.0.0/10, as well as IPv4-compatible, NAT64 (64:ff9b::/96) and 6to4 (2002::/16) addresses whose embedded IPv4 address is not globally routable. For deployments that cannot upgrade immediately, place authentication in front of the A2A push notification configuration path so that the webhook URL does not arrive from an untrusted caller, and deny egress from the Camel process to fc00::/7 at the network level; where the deployment has no need of IPv6, starting the JVM with -Djava.net.preferIPv4Stack=true removes the address class the gap turns on. Note that allowLocalWebhookUrls=false is already the default and does not by itself close the gap. | Thu 29 Oct |
| CVE-2026-34975exploit | 4.3 medium | 0.00% | useplunk, plunk | Plunk is an open-source email platform built on top of AWS SES. Prior to 0.8.0, a CRLF header injection vulnerability was discovered in SESService.ts, where user-supplied values for from.name, subject, custom header keys/values, and attachment filenames were interpolated directly into raw MIME messages without sanitization. An authenticated API user could inject arbitrary email headers (e.g. Bcc, Reply-To) by embedding carriage return/line feed characters in these fields, enabling silent email forwarding, reply redirection, or sender spoofing. The fix adds input validation at the schema level to reject any of these fields containing \r or \n characters, consistent with the existing validation already applied to the contentId field. This vulnerability is fixed in 0.8.0. | Sat 24 Oct |
| CVE-2025-61984exploit ×2 | 3.6 low | 0.00% | no CPE yet | ssh in OpenSSH before 10.1 allows control characters in usernames that originate from certain possibly untrusted sources, potentially leading to code execution when a ProxyCommand is used. The untrusted sources are the command line and %-sequence expansion of a configuration file. (A configuration file that provides a complete literal username is not categorized as an untrusted source.) | 15 Oct |
| CVE-2022-2068 | 7.3 high | 96.0% | openssl, debian, debian_linux, fedora | In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). | 14 Oct |
| CVE-2022-4450 | 7.5 high | 29.0% | openssl, stormshield, stormshield_network_security | The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the "name" (e.g. "CERTIFICATE"), any header data and the payload data. If the function succeeds then the "name_out", "header" and "data" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue. | 14 Oct |
| CVE-2015-2423 | 4.3 medium | 20.0% | microsoft, excel, office, powerpoint | Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT Gold and 8.1, Windows 10, Excel 2007 SP3, PowerPoint 2007 SP3, Visio 2007 SP3, Word 2007 SP3, Office 2010 SP2, Excel 2010 SP2, PowerPoint 2010 SP2, Visio 2010 SP2, Word 2010 SP2, Excel 2013 SP1, PowerPoint 2013 SP1, Visio 2013 SP1, Word 2013 SP1, Excel 2013 RT SP1, PowerPoint 2013 RT SP1, Visio 2013 RT SP1, Word 2013 RT SP1, and Internet Explorer 7 through 11 allow remote attackers to gain privileges and obtain sensitive information via a crafted command-line parameter to an Office application or Notepad, as demonstrated by a transition from Low Integrity to Medium Integrity, aka "Unsafe Command Line Parameter Passing Vulnerability." | 14 Oct |
| CVE-2021-22926 | 7.5 high | 15.0% | haxx, netapp, curl, active_iq_unified_manager, clustered_data_ontap | libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake. | 14 Oct |
| CVE-2026-43825 | 7.3 high | 14.0% | apache, opennlp | Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel Versions Affected: before 3.0.0-M4 (libsvm document categorization module; introduced in OPENNLP-1808 and only present on the 3.x line) Description: SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled stream with java.io.ObjectInputStream and calls readObject() without an ObjectInputFilter installed. ObjectInputStream materialises every class referenced in the stream before the resulting object is cast to SvmDoccatModel, so the cast that follows readObject() executes only after the foreign object graph has already been deserialised in full. If a Java deserialization gadget chain is available on the consumer's classpath, a crafted payload supplied to deserialize() executes arbitrary code in the JVM that loads it. Apache OpenNLP itself does not ship a known gadget chain, so the realistic risk is to downstream applications that embed the libsvm module alongside vulnerable transitive dependencies. The method is public and static, so any caller can pass an untrusted stream to it directly. The practical impact is remote code execution against processes that load SvmDoccatModel instances from untrusted or semi-trusted origins. Mitigation: 3.x users should upgrade to 3.0.0-M4. Users who cannot upgrade immediately should treat all serialized SvmDoccatModel streams as untrusted input unless their provenance is verified, and should avoid invoking SvmDoccatModel.deserialize() on streams supplied by end users or fetched from third-party sources without integrity checks. | Sun 25 Oct |
| CVE-2019-16869 | 7.5 high | 9.0% | netty, debian, debian_linux, ubuntu_linux | Netty before 4.1.42.Final mishandles whitespace before the colon in HTTP headers (such as a "Transfer-Encoding : chunked" line), which leads to HTTP request smuggling. | 8 Oct |
| CVE-2020-1935 | 4.8 medium | 9.0% | apache, debian, tomcat, debian_linux, ubuntu_linux | In Apache Tomcat 9.0.0.M1 to 9.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99 the HTTP header parsing code used an approach to end-of-line parsing that allowed some invalid HTTP headers to be parsed as valid. This led to a possibility of HTTP Request Smuggling if Tomcat was located behind a reverse proxy that incorrectly handled the invalid Transfer-Encoding header in a particular manner. Such a reverse proxy is considered unlikely. | 8 Oct |
| CVE-2023-3446 | 5.3 medium | 7.0% | openssl | Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. | 14 Oct |
| CVE-2022-1271 | 8.8 high | 6.0% | gnu, redhat, gzip, jboss_data_grid, debian_linux | An arbitrary file write vulnerability was found in GNU gzip's zgrep utility. When zgrep is applied on the attacker's chosen file name (for example, a crafted file name), this can overwrite an attacker's content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system. | 14 Oct |
| CVE-2025-35028 | 9.1 critical | 5.0% | no CPE yet | By providing a command-line argument starting with a semi-colon ; to an API endpoint created by the EnhancedCommandExecutor class of the HexStrike AI MCP server, the resultant composed command is executed directly in the context of the MCP server’s normal privilege; typically, this is root. There is no attempt to sanitize these arguments in the default configuration of this MCP server at the affected version (as of commit 2f3a5512 in September of 2025). | 18 Oct |
| CVE-2018-1061 | 7.5 high | 5.0% | python, debian, debian_linux, ansible_tower | python before versions 2.7.15, 3.4.9, 3.5.6rc1, 3.6.5rc1 and 3.7.0 is vulnerable to catastrophic backtracking in the difflib.IS_LINE_JUNK method. An attacker could use this flaw to cause denial of service. | 15 Oct |
| CVE-2023-0215 | 7.5 high | 5.0% | openssl, stormshield, stormshield_management_center | The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected. | 14 Oct |
| CVE-2021-22946 | 7.5 high | 5.0% | haxx, debian, curl, debian_linux, fedora | A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network. | 14 Oct |
| CVE-2021-22925 | 5.3 medium | 5.0% | haxx, fedoraproject, curl, fedora, cloud_backup | curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS`in libcurl. This rarely used option is used to send variable=content pairs toTELNET servers.Due to flaw in the option parser for sending `NEW_ENV` variables, libcurlcould be made to pass on uninitialized data from a stack based buffer to theserver. Therefore potentially revealing sensitive internal information to theserver using a clear-text network protocol.This could happen because curl did not call and use sscanf() correctly whenparsing the string provided by the application. | 14 Oct |
| CVE-2021-22898 | 3.1 low | 5.0% | haxx, debian, curl, debian_linux, fedora | curl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol. | 14 Oct |
| CVE-2021-36690 | 7.5 high | 4.0% | sqlite, oracle, zfs_storage_appliance_kit, iphone_os | A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library. | 14 Oct |
| CVE-2023-5678 | 5.3 medium | 4.0% | openssl | Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. | 14 Oct |
| CVE-2018-7159 | 5.3 medium | 4.0% | nodejs, node.js | The HTTP parser in all current versions of Node.js ignores spaces in the `Content-Length` header, allowing input such as `Content-Length: 1 2` to be interpreted as having a value of `12`. The HTTP specification does not allow for spaces in the `Content-Length` value and the Node.js HTTP parser has been brought into line on this particular difference. The security risk of this flaw to Node.js users is considered to be VERY LOW as it is difficult, and may be impossible, to craft an attack that makes use of this flaw in a way that could not already be achieved by supplying an incorrect value for `Content-Length`. Vulnerabilities may exist in user-code that make incorrect assumptions about the potential accuracy of this value compared to the actual length of the data supplied. Node.js users crafting lower-level HTTP utilities are advised to re-check the length of any input supplied after parsing is complete. | 8 Oct |
| CVE-2026-41492 | 9.8 critical | 3.0% | dgraph | Dgraph is an open source distributed GraphQL database. Prior to 25.3.3, Dgraphl exposes the process command line through the unauthenticated /debug/vars endpoint on Alpha. Because the admin token is commonly supplied via the --security "token=..." startup flag, an unauthenticated attacker can retrieve that token and replay it in the X-Dgraph-AuthToken header to access admin-only endpoints. This is a variant of the previously fixed /debug/pprof/cmdline issue, but the current fix is incomplete because it blocks only /debug/pprof/cmdline and still serves http.DefaultServeMux, which includes expvar's /debug/vars handler. This vulnerability is fixed in 25.3.3. | Sun 25 Oct |
50 of 668 · Next
Download these 668 as CSV · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.