Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2020-9054KEVexploit | 9.8 critical | 100.0% | zyxel, nas326_firmware, nas520_firmware, nas540_firmware | Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2 | 8 Oct |
| CVE-2026-45321KEVexploit ×12 | 9.6 critical | 3.0% | tanstack, mistral, tanstack\/arktype-adapter, tanstack\/eslint-plugin-router, tanstack\/eslint-plugin-start | On 2026-05-11, between approximately 19:20 and 19:26 UTC, 84 malicious versions across 42 @tanstack/* packages were published to the npm registry. The publishes were authenticated via the legitimate GitHub Actions OIDC trusted-publisher binding for TanStack/router, but the publish workflow itself was not modified. The attacker chained three known vulnerability classes — a pull_request_target "Pwn Request" misconfiguration, GitHub Actions cache poisoning across the fork↔base trust boundary, and runtime memory extraction of the OIDC token from the Actions runner process — to publish credential-stealing malware under a trusted identity. Each affected package received exactly two malicious versions, published a few minutes apart. | Mon 26 Oct |
| CVE-2023-48795exploit ×5 | 5.9 medium | 94.0% | openbsd, putty, openssh, filezilla_client | The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in [email protected] and (if CBC is used) the [email protected] MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust. | 15 Oct |
| CVE-2017-5645exploit ×2 | 9.8 critical | 89.0% | apache, netapp, log4j, oncommand_api_services, oncommand_insight | In Apache Log4j 2.x before 2.8.2, when using the TCP socket server or UDP socket server to receive serialized log events from another application, a specially crafted binary payload can be sent that, when deserialized, can execute arbitrary code. | 8 Oct |
| CVE-2022-1292exploit ×5 | 7.3 high | 83.0% | siemens, openssl, brownfield_connectivity_gateway, debian_linux | The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). | 14 Oct |
| CVE-2021-3449exploit | 5.9 medium | 64.0% | openssl, debian, debian_linux, freebsd | An OpenSSL TLS server may crash if sent a maliciously crafted renegotiation ClientHello message from a client. If a TLSv1.2 renegotiation ClientHello omits the signature_algorithms extension (where it was present in the initial ClientHello), but includes a signature_algorithms_cert extension then a NULL pointer dereference will result, leading to a crash and a denial of service attack. A server is only vulnerable if it has TLSv1.2 and renegotiation enabled (which is the default configuration). OpenSSL TLS clients are not impacted by this issue. All OpenSSL 1.1.1 versions are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1-1.1.1j). | 8 Oct |
| CVE-2026-2699exploit ×3 | 9.8 critical | 58.0% | progress, sharefile_storage_zones_controller | Customer Managed ShareFile Storage Zones Controller (SZC) allows an unauthenticated attacker to access restricted configuration pages. This leads to changing system configuration and potential remote code execution. | Mon 26 Oct |
| CVE-2020-9484exploit ×17 | 7.0 high | 56.0% | apache, debian, tomcat, debian_linux, leap | When using Apache Tomcat versions 10.0.0-M1 to 10.0.0-M4, 9.0.0.M1 to 9.0.34, 8.5.0 to 8.5.54 and 7.0.0 to 7.0.103 if a) an attacker is able to control the contents and name of a file on the server; and b) the server is configured to use the PersistenceManager with a FileStore; and c) the PersistenceManager is configured with sessionAttributeValueClassNameFilter="null" (the default unless a SecurityManager is used) or a sufficiently lax filter to allow the attacker provided object to be deserialized; and d) the attacker knows the relative file path from the storage location used by FileStore to the file the attacker has control over; then, using a specifically crafted request, the attacker will be able to trigger remote code execution via deserialization of the file under their control. Note that all of conditions a) to d) must be true for the attack to succeed. | 8 Oct |
| CVE-2020-1967exploit | 7.5 high | 53.0% | openssl, debian, debian_linux, freebsd | Server or client applications that call the SSL_check_chain() function during or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a result of incorrect handling of the "signature_algorithms_cert" TLS extension. The crash occurs if an invalid or unrecognised signature algorithm is received from the peer. This could be exploited by a malicious peer in a Denial of Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this issue. This issue did not affect OpenSSL versions prior to 1.1.1d. Fixed in OpenSSL 1.1.1g (Affected 1.1.1d-1.1.1f). | 8 Oct |
| CVE-2022-25236exploit | 9.8 critical | 35.0% | libexpat_project, debian, libexpat, debian_linux, http_server | xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs. | 14 Oct |
| CVE-2020-8840exploit ×6 | 9.8 critical | 27.0% | fasterxml, debian, jackson-databind, debian_linux, oncommand_api_services | FasterXML jackson-databind 2.0.0 through 2.9.10.2 lacks certain xbean-reflect/JNDI blocking, as demonstrated by org.apache.xbean.propertyeditor.JndiConverter. | 8 Oct |
| CVE-2019-6110exploit ×2 | 6.8 medium | 25.0% | openbsd, winscp, openssh, element_software | In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred. | 14 Oct |
| CVE-2021-3450exploit | 7.4 high | 18.0% | openssl, freebsd, santricity_smi-s_provider_firmware | The X509_V_FLAG_X509_STRICT flag enables additional security checks of the certificates present in a certificate chain. It is not set by default. Starting from OpenSSL version 1.1.1h a check to disallow certificates in the chain that have explicitly encoded elliptic curve parameters was added as an additional strict check. An error in the implementation of this check meant that the result of a previous check to confirm that certificates in the chain are valid CA certificates was overwritten. This effectively bypasses the check that non-CA certificates must not be able to issue other certificates. If a "purpose" has been configured then there is a subsequent opportunity for checks that the certificate is a valid CA. All of the named "purpose" values implemented in libcrypto perform this check. Therefore, where a purpose is set the certificate chain will still be rejected even when the strict flag has been used. A purpose is set by default in libssl client and server certificate verification routines, but it can be overridden or removed by an application. In order to be affected, an application must explicitly set the X509_V_FLAG_X509_STRICT verification flag and either not set a purpose for the certificate verification or, in the case of TLS client or server applications, override the default purpose. OpenSSL versions 1.1.1h and newer are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1h-1.1.1j). | 8 Oct |
| CVE-2020-15778exploit ×4 | 7.4 high | 14.0% | openbsd, netapp, openssh, a700s_firmware, active_iq_unified_manager | scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of "anomalous argument transfers" because that could "stand a great chance of breaking existing workflows." | 14 Oct |
| CVE-2019-14540exploit | 9.8 critical | 11.0% | fasterxml, netapp, jackson-databind, oncommand_api_services, oncommand_workflow_automation | A Polymorphic Typing issue was discovered in FasterXML jackson-databind before 2.9.10. It is related to com.zaxxer.hikari.HikariConfig. | 8 Oct |
| CVE-2023-5178exploit | 8.8 high | 10.0% | linux, redhat, linux_kernel, enterprise_linux, active_iq_unified_manager | A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe/TCP subsystem in the Linux kernel. This issue may allow a malicious user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation. | 14 Oct |
| CVE-2022-36946exploit ×2 | 7.5 high | 9.0% | linux, debian, linux_kernel, debian_linux, active_iq_unified_manager | nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb->len. | 14 Oct |
| CVE-2025-68705exploit | 8.8 high | 7.0% | rustfs | RustFS is a distributed object storage system built in Rust. In versions 1.0.0-alpha.13 to 1.0.0-alpha.78, RustFS contains a path traversal vulnerability in the /rustfs/rpc/read_file_stream endpoint. This issue has been patched in version 1.0.0-alpha.79. | 14 Oct |
| CVE-2022-25315exploit | 9.8 critical | 5.0% | libexpat_project, debian, libexpat, debian_linux, fedora | In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames. | 14 Oct |
| CVE-2022-25235exploit | 9.8 critical | 5.0% | libexpat_project, debian, libexpat, debian_linux, fedora | xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context. | 14 Oct |
| CVE-2020-14195exploit | 8.1 high | 5.0% | fasterxml, netapp, jackson-databind, active_iq_unified_manager, steelstore_cloud_integrated_storage | FasterXML jackson-databind 2.x before 2.9.10.5 mishandles the interaction between serialization gadgets and typing, related to org.jsecurity.realm.jndi.JndiRealmFactory (aka org.jsecurity). | 8 Oct |
| CVE-2022-25314exploit | 7.5 high | 5.0% | libexpat_project, debian, libexpat, debian_linux, fedora | In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString. | 14 Oct |
| CVE-2026-6770exploit | 6.5 medium | 4.0% | mozilla, firefox, thunderbird | Other issue in the Storage: IndexedDB component. This vulnerability was fixed in Firefox 150, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. | Mon 26 Oct |
| CVE-2021-41617exploit | 7.0 high | 3.0% | openbsd, fedoraproject, openssh, fedora, active_iq_unified_manager | sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user. | 14 Oct |
| CVE-2022-25313exploit ×2 | 6.5 medium | 3.0% | libexpat_project, debian, libexpat, debian_linux, fedora | In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element. | 14 Oct |
| CVE-2026-43503exploit ×10 | 8.8 high | 2.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. | 16 Oct |
| CVE-2025-71338exploit | 10.0 critical | 1.0% | flowiseai, flowise | Flowise through 2.2.7 fails to sanitize path segments in the document-store loader endpoint, allowing unauthenticated attackers to write files outside the storage directory. Attackers can use parent-directory sequences to escape the storage directory and overwrite application files loaded at boot for remote code execution. | 12 Oct |
| CVE-2026-5366exploit | 9.9 critical | 1.0% | prefect | Prefect version 3.6.23 is vulnerable to remote code execution due to improper handling of user-controlled input in the `GitRepository` storage class. The `commit_sha` parameter, which is passed to git commands, lacks validation and does not include a `--` separator to distinguish user input from git flags. This allows attackers to inject arbitrary git flags, such as `--upload-pack`, enabling execution of external programs. Additionally, the `directories` parameter can be exploited to inject git flags during sparse-checkout operations. These vulnerabilities allow any user with deployment creation permissions to execute arbitrary commands on worker machines, compromising shared work pools in multi-tenant environments. | Sun 25 Oct |
| CVE-2026-93328exploit | 9.3 critical | 1.0% | no CPE yet | Path Traversal and Missing Authorization in cloud-storage source in Google Cloud MCP Toolbox for Databases (googleapis/mcp-toolbox) versions 1.2.0 through 1.4.0 allows an unauthenticated remote attacker to exfiltrate host files to external Google Cloud Storage buckets and overwrite arbitrary local files via crafted tool invocation parameters. | Mon 26 Oct |
| CVE-2026-66906exploit | 9.1 critical | 1.0% | apache, camel | Relative path traversal vulnerability in Apache Camel Azure Storage Blob component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them. | 12 Oct |
| CVE-2026-41473exploit | 8.8 high | 1.0% | cyberpanel | CyberPanel versions prior to 2.4.5 contain an authentication bypass vulnerability in the AI Scanner worker API endpoints that allows unauthenticated remote attackers to write arbitrary data to the database by sending requests to the /api/ai-scanner/status-webhook and /api/ai-scanner/callback endpoints. Attackers can exploit the lack of authentication checks to cause denial of service through storage exhaustion, corrupt scan history records, and pollute database fields with malicious data. | Mon 26 Oct |
| CVE-2026-74469exploit ×4 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | 16 Oct |
| CVE-2026-23697exploit | 8.7 high | 1.0% | no CPE yet | Vtiger CRM before 8.4.0 contains an authenticated file upload vulnerability that allows low-privileged users to achieve remote code execution by uploading a .phar file containing arbitrary PHP code through the Documents module, bypassing the extension denylist in config.inc.php which omits the .phar extension. The uploaded file is stored with its original .phar extension under the web-accessible storage directory, and a misconfigured .htaccess using Apache 2.2 syntax is silently ignored on Apache 2.4 deployments, allowing unauthenticated HTTP requests to directly execute the uploaded PHP payload. | Sun 25 Oct |
| CVE-2026-104082exploit | 8.6 high | 1.0% | no CPE yet | SmarterMail before build 9777 contains a remote code execution vulnerability that allows an attacker holding a SysAdmin-scoped access token to bypass the Volume Mount script-directory containment control by provisioning a new mail domain with an arbitrary FileStore root path inside the trusted Scripts directory via the domain-put endpoint. Attackers can disclose the Scripts path through the AddOrUpdateMount endpoint, clear the upload extension blacklist via the global-mail endpoint, then upload a malicious script through the ordinary mail file-storage upload API so that saving a CommandMount triggers RunScript before validation, resulting in a reverse shell executing as the SmarterMail service account with SYSTEM-level privileges. | Tue 27 Oct |
| CVE-2025-62506exploit | 8.1 high | 1.0% | no CPE yet | MinIO is a high-performance object storage system. In all versions prior to RELEASE.2025-10-15T17-29-55Z, a privilege escalation vulnerability allows service accounts and STS (Security Token Service) accounts with restricted session policies to bypass their inline policy restrictions when performing operations on their own account, specifically when creating new service accounts for the same user. The vulnerability exists in the IAM policy validation logic where the code incorrectly relied on the DenyOnly argument when validating session policies for restricted accounts. When a session policy is present, the system should validate that the action is allowed by the session policy, not just that it is not denied. An attacker with valid credentials for a restricted service or STS account can create a new service account for itself without policy restrictions, resulting in a new service account with full parent privileges instead of being restricted by the inline policy. This allows the attacker to access buckets and objects beyond their intended restrictions and modify, delete, or create objects outside their authorized scope. The vulnerability is fixed in version RELEASE.2025-10-15T17-29-55Z. | 19 Oct |
| CVE-2026-66907exploit | 7.5 high | 1.0% | apache, camel | Relative path traversal vulnerability in Apache Camel Google Storage component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them. | Sat 24 Oct |
| CVE-2024-50602exploit | 5.9 medium | 1.0% | netapp, debian, active_iq_unified_manager, solidfire_\&_hci_management_node, solidfire_\&_hci_storage_node | An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. | 15 Oct |
| CVE-2026-52782exploit | 9.9 critical | 0.00% | no CPE yet | OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, there is an IDOR through /projects/<A>/settings/project_storages/<A_ps_id> via PATCH parameter "storages_project_storage[project_folder_id]" leads to Access to Unauthorized Resources. A project-admin in one project can hijack the managed Nextcloud or OneDrive folder of another project on the same storage by writing the victim project's project_folder_id into the attacker's Storages::ProjectStorage row. The next managed-folder sync overwrites the ACL on the referenced folder with the attacker project's user list. This vulnerability is fixed in 17.3.3 and 17.4.1. | Sun 25 Oct |
| CVE-2026-70559exploit | 8.7 high | 0.00% | no CPE yet | Dinky's SysConfigController.getAll() handler for GET /api/sysConfig/getAll carries a method-level @SaIgnore annotation that short-circuits the class-level @SaCheckLogin, so the Sa-Token interceptor lets the request through with no session or role check. Any remote unauthenticated caller who can reach the Dinky HTTP port (8888 by default) receives the full live system configuration (54 entries on a stock v1.2.5 install) with one parameterless GET. Only one credential field (sys.maven.settings.repositoryPassword) has a desensitization handler wired; the other credential-bearing fields (sys.env.settings.dinkyToken, sys.ldap.settings.userPassword, sys.resource.settings.oss.accessKey and secretKey, and sys.dolphinscheduler.settings.token) return in cleartext. A bare install leaks the shipped defaults, including the hardcoded dinkyToken efda1551-7958-4e0f-80a8-dfd107df3e38 and minioadmin/minioadmin OSS keys; once an operator configures LDAP, object storage, or DolphinScheduler through the Settings Center, those live third-party credentials leak from the same endpoint. Because dinkyToken is the sole gate on the sibling POST /download/uploadFromRsByLocal arbitrary file write, this disclosure defeats token rotation as a mitigation for that vulnerability. Affects Dinky v1.2.5 (the current release, 2025-11-05) and the development branch (dev HEAD 63b5a5a), where the affected code is byte-identical. | Sat 24 Oct |
| CVE-2026-100833exploit | 8.6 high | 0.00% | no CPE yet | Contrast (edgelesssys/contrast) versions 1.14.0 before 1.23.1 generate runtime policies that fail to detect all container image substitutions. A bad rebase during a Kata Containers update accidentally introduced an `allow_storage` rule that accepts storage entries using the `image_guest_pull` driver without verifying the image digest. An attacker with access to the Kata agent API — for example, a Kubernetes cluster administrator in Contrast's threat model — can therefore substitute a container image with an exploit payload, provided the substituted image satisfies the remaining policy rules, undermining the confidential container's integrity guarantees. | 9 Oct |
| CVE-2026-40048exploit | 7.8 high | 0.00% | apache, camel | The Camel-PQC FileBasedKeyLifecycleManager class deserializes the contents of `<keyId>.key` files in the configured key directory using java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. The cast to `java.security.KeyPair` is evaluated only after `readObject()` has already returned, so any `readObject()` side effects in the deserialized object run before the type check. An attacker who can write to the key directory used by a Camel application — for example through a path traversal into the directory, misconfigured filesystem permissions on the volume where keys are stored, a compromised key provisioning pipeline, or a symlink attack — can place a crafted serialized Java object that, when deserialized during normal key lifecycle operations, results in arbitrary code execution in the context of the application. This issue affects Apache Camel: from 4.19.0 before 4.20.0, from 4.18.0 before 4.18.2. Users are recommended to upgrade to version 4.20.0, which fixes the issue by replacing java.io.ObjectInputStream-based key and metadata storage with standard PKCS#8 (private key) / X.509 SubjectPublicKeyInfo (public key) Base64 JSON encoding. For users on the 4.18.x LTS releases stream, upgrade to 4.18.2. | Mon 26 Oct |
| CVE-2020-1712exploit | 7.8 high | 0.00% | systemd_project, redhat, systemd, ceph_storage, discovery | A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages. | 14 Oct |
| CVE-2026-113872exploit | 7.5 high | 0.00% | no CPE yet | multer is a middleware for Node.js that handles multipart/form-data file uploads. In versions from 2.0.0 before 2.5.0, when multer is configured with an asynchronous fileFilter, a single request can crash the Node.js process. If the request is aborted while one file's asynchronous fileFilter is still pending, the pending callback later resumes a parsing stream that multer has already torn down, and the underlying parser emits an error on a stream that no longer has an error listener, which Node raises as an unhandled error event so the process exits. Any application using multer with an asynchronous fileFilter is affected regardless of storage engine, while uploads using a synchronous fileFilter are not affected. The issue is fixed in multer 2.5.0, and users should upgrade to 2.5.0 or later. As a workaround, use a synchronous fileFilter. | Thu 22 Oct |
| CVE-2025-38502exploit | 7.1 high | 0.00% | linux, debian, linux_kernel, debian_linux, simatic_cn_4100_firmware | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps. | 15 Oct |
| CVE-2026-48121exploit | 6.7 medium | 0.00% | no CPE yet | @langchain/langgraph-checkpoint-mongodb provides a LangGraph.js CheckpointSaver implementation that uses MongoDB for storage. Versions 1.3.0 and below are vulnerable to NoSQL injection: checkpoint identifiers (thread_id, checkpoint_ns, checkpoint_id) from config.configurable are passed into MongoDB find() queries in MongoDBSaver.getTuple() without type enforcement. If an attacker supplies an object payload (such as MongoDB operators $gt or $ne) instead of a string, it can be interpreted as a query operator, bypassing thread scoping and leaking checkpoints, including pending writes, across tenants. Applications are at risk if they forward untrusted input into config.configurable without coercing it to strings or validating it against a schema, particularly in multi-tenant or user-isolated setups. Apps that only use server-issued, string-typed identifiers with schema validation rejecting non-string fields are not affected. This issue has been fixed in version 1.3.1. | Sat 24 Oct |
| CVE-2026-35492exploit | 6.5 medium | 0.00% | no CPE yet | Kedro-Datasets is a Kendo plugin providing data connectors. Prior to 9.3.0, PartitionedDataset in kedro-datasets was vulnerable to path traversal. Partition IDs were concatenated directly with the dataset base path without validation. An attacker or malicious input containing .. components in a partition ID could cause files to be written outside the configured dataset directory, potentially overwriting arbitrary files on the filesystem. Users of PartitionedDataset with any storage backend (local filesystem, S3, GCS, etc.) are affected. This vulnerability is fixed in 9.3.0. | Mon 26 Oct |
| CVE-2026-48500exploit | 6.5 medium | 0.00% | no CPE yet | Filament is a collection of full-stack components for accelerated Laravel development. From 3.0.0 until 3.3.52, 4.11.5, and 5.6.5, any schema can contain a file upload form field, so Filament applies Livewire's WithFileUploads trait to the Livewire component the schema is embedded in. However, some schemas, such as the panel login form, do not require file uploads, and exposing unauthenticated temporary file uploads on these components is not an acceptable risk. On these components, an unauthenticated attacker could upload arbitrary files to the application's temporary storage, which could be abused to exhaust disk space or inflate storage costs. This vulnerability is fixed in 3.3.52, 4.11.5, and 5.6.5. | Sun 25 Oct |
| CVE-2026-23007exploit | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: block: zero non-PI portion of auto integrity buffer The auto-generated integrity buffer for writes needs to be fully initialized before being passed to the underlying block device, otherwise the uninitialized memory can be read back by userspace or anyone with physical access to the storage device. If protection information is generated, that portion of the integrity buffer is already initialized. The integrity data is also zeroed if PI generation is disabled via sysfs or the PI tuple size is 0. However, this misses the case where PI is generated and the PI tuple size is nonzero, but the metadata size is larger than the PI tuple. In this case, the remainder ("opaque") of the metadata is left uninitialized. Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the metadata is larger than just the PI tuple. | 21 Oct |
| CVE-2026-60093exploit | 5.5 medium | 0.00% | apache, camel | Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them. | 12 Oct |
| CVE-2026-64640exploit | 5.3 medium | 0.00% | apache, polaris | Apache Polaris did not consistently validate storage locations supplied during table and view registration. An authenticated principal with permission to register a table or view could, depending on the affected release and registration path, cause Polaris to use the catalog's storage credentials to read a caller-selected Iceberg metadata file before verifying that the file was within the catalog's allowed storage locations. If the catalog's underlying credentials could read an object outside that boundary, this could disclose limited information from the object. Polaris could also accept registration metadata located within an allowed location that contained references to storage locations outside the allowed boundary. This second condition did not itself cause Polaris to read the referenced external locations during registration. The demonstrated impact is limited to confidentiality. No unauthorized data modification or availability impact has been demonstrated. The server-side read requires a deployment using S3 credential vending and an object outside the allowed locations that the catalog's underlying storage credentials can read. Exploitation requires an authenticated principal with table- or view-registration privileges. | Sat 24 Oct |
50 of 716 · Next
Download these 716 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.